Tec 9 Disassembly/Reassembly

[@bigdapramirez6157]

One of the few guns that has the ability to disassemble itself

[@alv3678]

Thank you! Bought one out of a vintage shop a couple years ago. It’s operational but more of a historical conversation piece. Broke it out to do a cleaning. Needless to say I needed a little help. Appreciate it!

[@UndertheGun]

Very cool!

[@adrian650rwc]

Had a gold one when i was younger, it jammed, always wanted to take it apart and tinker with it

[@ToneCaponeohio]

Best breakdown video :101

[@andreyholdarov6120]

Простая игрушка , легка для повторения , ствольная коробка -амортизатор от 08 , как раз там и гайка внутренняя есть шток держит и диаметр подходит ,корпус можно собрать из профильной трубы ,ствол из буровой штанги от промышленного перфоратора ,ну а дальше болты и заклёпки . Ну прям как Партизаны во второй мировой ,минимум машинной обработки и с вами уже считаются !

[@UndertheGun]

Они простые

[@ryanbrown938]

Ahh the beloved tec-9..... Still want one for the collection

[@THF117]

Thanks I was wondering if the pin was locked up or just needed more force

[@hardville]

The only problem I had with this gun was the firing pin every now and then very easy to install other than that it was very reliable

[@bulletprooftactical9842]

Great info man! Thanks for the video. I just bought mine.

[@gotmgaming4]

I just had the charging handle broke on me other wise it shot perfectly not a single jam

[@gotmgaming4]

UPDATE: Bought a new charging handle I just make sure it’s well lubed and clean and shoots like a dream

[@krek420]

@@gotmgaming4 glad to hear your gun is fixed From europe with no sight of gunpowder 🇪🇺

[@clayton9136]

@@krek420 sad

[@jerrymartin7019]

@@krek420 Sorry to hear that bro. Hopefully that will change one day.

[@BBKlima]

Thanks, I always forget that you have to pull the bolt back a bit to get the take down bolt to go in!

[@waynebrown1800]

You CANNOT just ‘drop in’ the striker. You have to fit it onto the firing pin and slip them in together. If you do not, you will break off the striker tips.

[@UndertheGun]

Never had an issue.

[@MrCdc093084]

@@UndertheGun on the Tec-DC9 yeah hes right, it doesnt drop in, you have to slide it back and fit it,then slide it forward

[@loganpickard8306]

Thank you for this video, very helpful

[@mossy3565]

what the hell am I doing here i have a test tommorow

[@gruff6830]

did you pass?

[@dmario2992]

Did you pass?

[@mossy3565]

Yup

[@foxsmith5718]

Congratulations, lol- ​@@mossy3565

[@Trav-I24]

Alright might be a dumb question and don’t ask me how but my buddy has one of these and the detent ball in his broke or fell out. Is there anyway to fix or replace the part?

[@UndertheGun]

Not without specialized tooling. Just by another charging handle.

[@Trav-I24]

@@UndertheGun oh the detent ball that is gone is the one that holds the assembly pin in place. The upper is pretty much junk at this point I’m guessing?

[@UndertheGun]

@@Trav-I24 parts might be available.

[@johnnava8338]

Did you fix the detent ball? Got the same issue

[@cupcakefights]

You think it'd be possible to somehow machine a back plate adapter for AR buffer tubes?

[@UndertheGun]

I am sure it is.

[@jonathandavis3157]

Where to purchase kits and parts for this type of weapon?

[@bangbangdgang]

My pops just gave me his old tec he bought when he served. Things crusty, and missing some pieces. Any chance of me bringing it back to life?

[@UndertheGun]

Always, parts are around,

[@cryptoloverscryptoaddicts1483]

mine will not even load the bullets or go click when i pull the trigger never used it just wont rack bullets the bolt is just stuck in the pull back position. no safety buttone either installed tek 9 luger mod k 6-9 interdynamic model.. any sugestions..

[@UndertheGun]

What is the serial number?

[@jonhelms6496]

I have a tec 9 with a low 05000 serial number. It has a dove tail rear sight which is missing. Mine doesn’t have the cap that unscrews. All it has is a round plastic piece with the guide rods held to it with C clips,and a C clip in the front guide rod. Do you have any information on it?

[@UndertheGun]

I do not.

[@answersforlooking9430]

my serial # is in the very low 001600.....

[@xeongaming9390]

Anybody know how to fix a slide lock problem on the tec-9 or is it something that I just need to replace

[@1991tommygun]

Why would you trash it, just because the detent housing is welded on dont mean it cant be removed and rewelded

[@apchu_TV]

Absolutely idiotic ban of the gun.

[@justingutz9987]

Any cure for failure to eject. It pulls the rd out but just wont kick it out every 3rd shot.

[@UndertheGun]

HOtter ammo

[@MrCdc093084]

@@UndertheGun your ejector might need to be re aligned, its the thing with the hex set screw he didnt wanna take apart,loosen it up,stick a 9mm round on it,let it drop down on it,and tighten up the set screw,dont make it too tight or it wont catch,too loose and it will stove pipe

[@thekingofnothing4646]

I really do think if you just buy new springs an possibly a new fireing pin i think it would be reliable eny opinions what do you think

[@UndertheGun]

They were not know for reliability new, so maybe. But I would not hold my breath.

[@candicedowney8524]

will the ap9 upper fit an intratec receiver???

[@UndertheGun]

I have never tried.

[@JuanitaHuro]

Dam good video sir, thanks ...oldgunbuff

[@nursekazhasaknife9124]

Where can you buy an assembly pin for this model?

[@UndertheGun]

www.gunpartscorp.com/gun-manufacturer/intratec/tec-9

[@nursekazhasaknife9124]

@@UndertheGun thank you !

[@deandrecoleman6927]

I just got a tech 9 and it won't chamber a round do you guys have any suggestions?

[@shiannemcgee2470]

Damn bro that bet not be yo only gun

[@janathanlongd1612]

change the feeder you may have to fabricate your own though

[@davidmitchell7464]

Mine will shoot like one bullet at a time and jam trying to feed the next round still trying to figure it out

[@davidmitchell7464]

Deandre Coleman check u firing pin I pulled my tec apart just after I commented with the same problem and the tip of my firing pin had sheared off

[@exaviermcnair6744]

Ammo

[@rtz549]

How's the rubber piece attached?

[@UndertheGun]

Adhesive

[@XedOutRecords]

Can't get my springs to line up perfectly to go in the barrel can someone please help

[@chardfrazier246]

What type of clip does it take

[@UndertheGun]

They are proprietary to the tec9.

[@chardfrazier246]

@@UndertheGun can you use a pro mag magazine or any other magazines

[@UndertheGun]

@@chardfrazier246 As long as it is for a tec9.

[@loganpickard8306]

Which pieces do I lubricate ?

[@UndertheGun]

yes

[@size12wshoes]

Shouldn't it be oiled in a few spots as it is being reassembled?

[@UndertheGun]

No more than a wipe down. Heavy lubrication is as bad or worse than none at all.

[@jaym5016]

Any idea why I can rack my tec 9 .. took it apart to clean it now i can’t rack it ..

[@brandenelkins2923]

Your Cap is too tight. I’m having a problem with mine where I can feel the striker hit something when I cock it back.

[@megadeth1763]

Don't Listen To ANY Jokers that start talking the not worth anything (pretty ban) these are going to be very much a collectors item and will be worth $$ especially as time goes on. Oh.. the ones that call em names, lol. like they're dumming down publics perception.

[@UndertheGun]

Yeah no they wont. They will stay right where they are in the market as far as price goes. And they never run correctly, I get them in all the time needing to be fixed.

[@marthacervantez3844]

@@UndertheGun I'm sorry how much does something like this cost now in today's day?

[@UndertheGun]

@@marthacervantez3844 they are selling on gunbroker between $200 and $600 over the last 90 days.

[@dlittle9556]

@@UndertheGun and now theyre selling for 800-1200$ lmfao

[@dob5820]

Are the values going up on the tech 9 and AB 10

[@UndertheGun]

People are asking some outrageous prices sometimes, but they are not selling at those prices.

[@TheTeeWorldsfreak]

now that's a crusty tec9!

[@UndertheGun]

It was a lot worse before I cleaned it up.

[@ClubbingBabySealz]

tecs where made in the 90's out of stamped and cut cheap steel what do you expect., out of all the ones I've seen this is one of the better ones. Sadly they're kind of a novelty they're prone to jamming and misfiring as well as magazine issues from how crudely built they are.

[@dob5820]

Actually, I have one. Bought it new 10yrs ago. Haven't shot more then 50 rounds thru it. Bought it as a collector gun a long with a mac 10.

[@dob5820]

You are right they do have jamming problems.

[@chroma6947]

Dan OBrien just gotta clean it and use good ammo n it shouldnt jam

[@gulshanTyagi3554]

7:03 7:04 how to make it

[@petecarter5714]

Why can't you just upgrade the parts that made the original design jam?

[@UndertheGun]

Thats called buying a new gun,

[@TheSquirreless]

Watch looks like the pause screen from Goldeneye

[@UndertheGun]

It is

[@sammysam6209]

Cost of patent

[@dukeofnuke2446]

Theoretically it is not hard to convert a closed bolt tec 9 to full auto

[@UndertheGun]

A lot harder than an open bolt gun.

[@megadeth1763]

@@UndertheGun No its not ! I want one but not for the reasons of rapid fire, it will be nice to add to my wall.

[@five5105]

E L1 Nah, it's a lot harder. With an open bolt, just remove the trigger disconnect and hey presto! You've got a submachinegun! With a closed bolt, you'd have to make an auto sear, which involves a lot more work than remove a piece of metal. Plus you have to make sure the sear functions properly.

[@dukeofnuke2446]

@@five5105 The Tec-9 is a little bit more complicated than that since the semi auto version had some "major" interior changes

[@five5105]

duke of nuke Yes, since it was converted from a simple open bolt gun to a striker fired closed bolt, it had to undergo serious change. Open bolt examples of what is collectively known as the TEC-9 and other semi auto open boots are very easy to convert to full auto, while closed bolt makes it more difficult. What you're saying is true, but only for open bolt guns.

[@baxtermason6909]

...good vid...thanks...;-)

[@713youNeverwillB]

“I got a friend that need to ask a question about his” clean and maintenance it’s a 9 too

[@waserdgato]

real weapon in this vid was that flathead lol jeeez

[@judojudo10050]

Nerfed

[@mahalik_vali]

Cs go baby

[@elgallodecente5605]

To much words... and the desassembled of the lower??????

[@UndertheGun]

to much bad engrish

[@4x4james12]

@@UndertheGun lol, but a vid on the lower needs to happen. My mag release has less then half the movement yours has.

[@clayton9136]

Oh yeah just trash the whole thing cause the retaining ball falls out. Wtf 🤦🏽‍♂️

[@mateuskalashnikov1002]

✌🏻

[@Chunk4402]

Useless thanks

[@bigharba6399]

How much do you know about guns😂