Tech 21 SansAmp Bass Driver DI Demo - Sweetwater Sound

[@devonharrison9951]

Love this little bass box!! If you're tired of not truly "hearing" yourself on stage, this is for you, especially if you play direct. It gives you every possible tone you're looking for and even provides sample bass tones from well-known bassists in the instructions. The guitar player in my group even said, "I can actually hear you now." Felt great to hear that after months of being unable to hear myself. At home, this little guy really pumps up the sound coming out of my Hartke. All I can say is, I agree with all the positive reviews here. This little box is worth every penny. Thank you, Tech 21 and Sweetwater for brightening my bass player days ahead!! :)

[@sweetwater]

Well, we'd say it's a great alternative to an amp when you run direct, and it can help make a good amp sound great, but it probably won't make a bad-sounding amp sound good. Thanks for watching!

[@mikeartz1069]

can i use my tech 21 bass fly rig with the sansamp di and go into the PA instead of using an amp?

[@accordv6er]

My bassman amp has me spoiled... Really this didn't add much for me. Amp already has everything except drive built into it. But if I don't want to tote my rig this is an amazing tool.

[@RDO2501]

We had this at church until it finally decided to buy the farm. It was the bread and butter of our bass sound.

[@anahowana]

There's no shame in asking questions ) This pedal is a preamp, it means that you can use it with another device called power amp, then you have a complete bass amp. A power amp gives power&watts, a preamp gives a tone.Now this pedal is also a DI ( direct input) it means you can plug the bass on the input of this pedal then you take the output straight to the mixboard, a PA system. now, this pedal can also work as regular stampbox, you can put it in effects loop of your amp to overdrive the sound

[@mikeartz1069]

If my amp went out a a gig could I just plug into the DI that plugs into the PA instead of using an amp?

[@requena79]

@@mikeartz1069 yes you can.

[@kungpao-wp2sq]

I'm 13 me and my dad watch this every morning before school

[@lil_cheese_xdlil_cheese_xd2287]

Why

[@levig384]

Why

[@dieHasser]

#howtoraiseyourkids

[@johnnyblaze2257]

Who gives a sh*t if your 13!

[@jellisor1995]

Why

[@KillSchwill]

This is by far my most favorite bass pedal for punk and rock style music. This thing by itself makes almost any bass sound huge and crisp. But when inline with an amp is where it really shines. Definitely a great pedal for any bass player or project studio engineer to have in their arsenal to help achieve a better bass sound.

[@bradfisher22]

100%. Has the ability to make a questionable bass sound like a unicorn vintage P-bass. And makes a unicorn bass untouchable 😅

[@germatrix]

this is the best explanation of the controls I've heard so far

[@odom2142]

My whole rig is an MXR bass compressor and a SansAmp. I've used it in front of many audiences for 16 years and it's always good. I can get pretty close to a real amp tone but only bring my bass and a little bag to a venue... It's convenient, reliable, and sounds good! No lugging an amp around ever!!! Just show up with bass around my back and plug in... Love it.

[@babayaga1767]

yep. i have a flyrig. back into iem's.

[@garybecker7047]

Eric Foreman grew up to work for Tech21?

[@bigdaddystinkeye]

My absolute first thought when I viewed this video. Ha!

[@louie9373]

He gets the Led out

[@tomtrold2884]

*Forman

[@absolving]

Lol. This guy is much cooler than Eric, though.

[@jasonbenford3427]

🤣🤣🤣!

[@BigA_13]

This pedal rocks! You can use it for any situation and it will give a bass rig a better sound. Every bassist should have one. It is the best pedal you can buy for the money.

[@alwaysforget911]

Does this thing ideally replace the need for an amp? Im new to adding bass to my recordings but dont have the money for a decent amp

[@theRealSintaxi]

@@alwaysforget911 effectively yes.

[@chrisc.4517]

Agree 100%. Don't rehearse or gig without it!

[@BagusWibisono]

hi sir.. how if comparing with aguilar tone hammer?

[@josephalaguna]

Help me understand... I can go out and by a Rumble 200 for example, then use this and boom, I have a night and day tonal enhancement?

[@googull271]

I love products that are simple to use, simple straightforward design and really sound and work great! Thanks for making a uselful product!

[@initialdluvr]

I've owned this pedal for years now and it's truly a game changer. I have an Ibanez bass that doesn't have the best tone on its own, but the pedal makes it glow with thick buttery tone. If it can make my cheapo bass sound great, it can make any bass sound great (good bassist required)

[@joshuacotton6436]

Best explanation of Sansamp I've seen. Not everybody understands it

[@jeffreypwright1]

We use all tech 21 products, no amps anymore. I use the programmable bass DI, Guitar player uses a Tri-A.C. and drummer uses V drums. Loudest thing behind the mains is a string breaking. check it out! Ive got vids of what it sounds like direct from the board on my page.

[@Dispensational_David]

I wanna hear a pedal demo once before I die where the clean tone doesn't sound like a tin can.

[@giuliano8031]

But that’s what it is, that’s the raw bass sound of the pickups.

[@ontheMark72]

only once?

[@josedealva4205]

@@giuliano8031 lol so ignorant.

[@giuliano8031]

jose de alva Why is it ignorant if I say the truth.

[@josedealva4205]

-truth- turns into -superstition- when it is compared and researched. but I understand why you call it the truth so I guess you are right.

[@panusiitonen8448]

I use Fender 4x10 cab and Mesa Big Block 750 amp. I use an active bass and the music is some kind metalcore :) The Mesa amp alone produces an incredible sound, but this Bass Driver takes it even further. This thing sounds unbelievable to me when I need a little distorted, compressed, big wall-like metal sound for live shows. I highly recommend this for everybody.

[@mouthkick]

The detailed technical descriptions are much appreciated. Thank you for being concise!

[@justinkline1294]

Best pedal demo ever. Gotta get one myself now. Thanks.

[@warrenmorphis4208]

Yeah...there's more expensive bass pedals out here - and some sound good...but THIS right here, has the great sound every "on-a-budget bassist" can appreciate!. Built like a small tank...versatile...reliable...easy to use... I never head to a gig without it! Some of the best gear money I ever spent. Period.

[@edwinhernandez9276]

Sansamp Base Driver DI v2 is the best value for your money!!! I own this and highly recommended it to anyone!!!! 💖 😎👍👍👍👍👍

[@Blackbeard_Barbell]

A GREAT pedal for a gigging bassist to have. It can absolutely save you in the event of amp failure, and make even the worst provided backlines into serviceable rigs. The compact size and overdrive features are only a plus when you consider how important a DI box is.

[@kristdelgado]

I use this amazing Tech 21 Sansamp. You can send the XLR Main Output (effected signal) to the PA system and the parallel output (uneffected signal) to a Boss OC-3 Super Octave pedal, then to a bass amplifier. You can get a fuller sound!!!

[@carrawitt]

This pedal will even make a crappy old bass guitar sound great. The best bass pedal ever which IMO every bassist MUST have.

[@Bflatest]

years I struggled with bass tone ... if I got the high end sounding great the low end suffered and vice-versa BUT NOW I've learned the best bass tone and situation is two signals one has all low-end the other all high and the low end signal use good compression and the high side use a good over drive dialed in to fit the style music. Then you sum them together boom you have a great clear controlled tone

[@heshinator1]

I want this pedal so much. I've only heard good things. I currently play out of a solid state, but I really want that tube warmth and crunch. Well... christmas is around the corner :)

[@necrobot889]

Did you get it?

[@dregen77]

Got this pedal. I always get a great sound from it no matter what bass I use. It's great to have with you when you borrow an amp for a gig. Great video explaining the controls!

[@nyhc43]

This is my favorite piece of gear EVER! Any bass player that takes their sound seriously needs to get one of these if you dont have something better already

[@elonmush4793]

something like an actual bass amp?

[@potatoheadhaoy]

@@elonmush4793 Well even if you do have a good amphead, it still does that slightly driven, gritty sort of heavy rock bass tone very well. I think he means a better DI preamp. I actually sort of prefer the bassliner pedal because it doesn't have that extra grit; more versatile and mellow tones.

[@cylonvoiceguy]

Fantastic product video, I'm thinking about getting one for my vocoder synth input!

[@davidhunt3903]

I have the V2 of this pedal, it is truly outstanding

[@maharlikastudio-manintoysh9147]

Great explanation with the functionalities of all the knobs! Thank you!

[@ianwebster3489]

I'm on a Little Mark III and a 2x10 cab. I'm only really playing small gigs. The problem with that rig is that the equipment is so clean that the bass sounds boring. I've just bought a Sansamp V2 so I can dirty up my tone a wee bit. Can't wait to try it out. Even bought a little looper pedal so I can mess around with the sounds.

[@TheFightFooter]

"kind of overdriven"

[@Thehighwaymurderers]

TheFightFooter Haha caught that.

[@CarlosDiaz-mf9uw]

0:48 almost went Limp Bizkit

[@joshuamcmichael4121]

Just think about it

[@TheWonderer7]

🤣

[@BlackRootsAcademyOfSoul]

I love this. Gonna get one!

[@SteveStockmalMusic]

New strings !!!! Yeeeaaaaahhhhh 😊

[@daniejames2591]

I have it running though a TC BH300. It has a nice over drive sound when you play rock over a lead.

[@BYWaudio]

Good to get a decent clean sound but not for overdrive-distortion sound at all. Perhaps needed to boost your pickup signal if needed. I have the early version tho!

[@auralfury]

have to def try one of these out, SW has always been helpful!

[@HoneyBadger213]

Great pedal. It really does make any rig sound good.

[@jorgelopez9620]

Literally sweet sound,

[@Christianonbass]

Great explanation of the features on this thing...thank you!

[@digitalfeelings66]

Main this pedal came to me by itself, its a long story, but I basically had it and never used it until a year ago. What the fuck?? IT´S THE MOST INSANE PEDAL EVER. HONESTLY. I used it to record bass lines and it just completely changed my sound and now I´ve just tried it with my new volca bass...honestly, I have no words for it, it´s still cheap for that prize boys.

[@PANICBLADE]

The tone he has in the very beginning is SO Steve Harris.

[@jacobcousins4234]

to me it isn't "round" enough for that but I can agree it sounds close

[@CJMcMullet]

The SansAmp Classic will get the sound spot on compared to this DI

[@nunoharris]

Hi. Do you know the settings used by Jason Newsted in Metallica years ? Thanks.

[@brianritzer8024]

Trying to decide between this one and the 3 channel programmable sansamp. Help?

[@Jurassicpark416]

Just grabbed this for the holidays ive yet to discover its capabilities

[@texgrouper7825]

Question and forgive my ignorance I am learning - “with the pedal bypassed you basically have an active direct box” what does this mean. Thanks

[@sweetwater]

Hello, Tex! The footswitch on the pedal just turns off the EQ and tone shaping functions, but it will function as a DI box to send your signal out to the soundboard. A DI box turns your high impedance, low level guitar signal into a balanced, line level signal that you can send longer cable lengths, and plug into balanced inputs on a board. Check out this article about the differences between Active and Passive DI boxes, that will help explain some more stuff, too. :) www.sweetwater.com/insync/what-is-the-difference-between-an-active-and-a-passive-di-box/ Thanks for the interest! Kevin Spunde, Sweetwater Sales Engineer, [phone] ext. 1732, [e-mail]

[@texgrouper7825]

Thanks so much. The explanation helped immensely.

[@Uluqiorra321]

Can I plug it directly info audio interface and does it work with guitar?

[@potatoheadhaoy]

this is like the bass equivalent of EMG pickups. Whatever you put into it, it's gonna sound like a sansamp. Good for that specific tone, but it's certainly divisive and kind of anachronistic in a way. I love it but I know plenty of bassists who kind of scoff at it because of how "of the times" it sounds.

[@josephalaguna]

Nice review.

[@joshuahenry4218]

Sounds amazing

[@rookd1137]

Nice video! Great stuff

[@1thess523]

I had a guy at Sam Ash show me this pre-amp through an ampeg 1x15 combo and it sounded really nice, my question is could i just get a powerful head even a lower quality one just for the sake of the wattage and with this pre-amp have it sound like a champ? I've come across some heads that are like 500wts but sound like junk but the have the power, would this be the solution to get an amp like that to sound really nice?

[@finnlabel]

cool! can I use it to simultaneously record both dry and wet signal of my bass into my DAW?

[@sweetwater]

Hi, Juha! Thanks for your message, Happy New Year! In short, yes! The "effected" signal is present on the left side of the device output via the 1/4" and XLR outs. A "clean" output is available on the right side from the "parallel output". Please contact us direct with other questions as you have them! Robert Williams, Senior Sweetwater Sales Engineer, [phone] ext. 2371, [e-mail]

[@SteveStockmalMusic]

Hi guys, I have a compressor stomp box,; would you suggest putting it before or after the Sans amp? Thanks 🙏

[@sweetwater]

Hello, Steve! I would recommend running your compressor first if you're using this as your DI to the front of house. That way your compressed signal is going into the board. Also, if you run it second, you might really squash your warmed-up tone coming from the SansAmp. Thanks for the interest! Kevin Spunde, Sweetwater Sales Engineer, [phone] ext. 1732

[@SteveStockmalMusic]

Ok great, I should have mentioned that I’m using this setup for recording... but I’m guessing it’s the same concept. Thanks again 😎

[@snapascrew]

I can see me using this with high presence, high drive, and a high blend setting, mixed with a plamer di (clean di) and a bass mic for shows (im not a bass player, a FOH guy tho...)

[@SeymourFTW]

What are the advantages to the 3 switch version over the 1 switch version.

[@mrbaileybass]

Great vid , very well explained .

[@antonioflores4855]

Church uses presonus board. My bass has active pickups for some reason my bass is too over powering just running it direct through the house. Could this DI help to prevent that nasty pop and crackling I’m currently getting..... 😢😢?????? Help

[@sweetwater]

Hello, Antonio! You need to use a DI if you're running your bass into any input that's expecting a low impedance, line level signal, like most inputs on most mixers. Especially if you're running a long cable length to a board. This may be a more complicated answer than I can provide via one-way communication. Please feel free to give me a call if you have a moment. Thanks for the interest! Kevin Spunde, Sweetwater Sales Engineer, [phone] ext. 1732

[@TheTrooperMB]

i own the exact same bass , mystic red color

[@TheTrooperMB]

couldn't find the mirror pickguard in stainless steel .. might go for acrylic one :(

[@rais3tong]

i got a question if i have a amp with a head already does using the pedal help or it doestn affect much or does it affect only with the small amp sir ?

[@ravelitschimo]

sounds great:-) thank you:-)

[@martinheath5947]

Could have turned the pedal round to let the camera and US see the settings!

[@christophermcguinness8200]

Great video! What amp you using, your clean signal tone sounds so rich!

[@fernieferniehaus]

This is the amp. He's playing through the SansAmp into whatever recording interface he used. the point of this pedal is to be able to play without an amp, hence the name SANSamp (No Amp) :)

[@awcrapitsajedi]

do I want to connect this as a stomp box or as an effect in-out to my orange AD200 Mk3 bass amp?

[@togelz]

i got this pedal recently, my question is will it be meaningless if i put bass compressor pedal before sansamp bd di (so te chain would be : bass - compressor - sansamp bddi - amplfier)?, and by the way what i mean meaningless is that the compressor dont really enhance the tone in any meaningfull way,...thanks before,...

[@Shinigami_R18Z1]

so can i get paul grays bass sound from this pedal???

[@DanielAndrade-so6fj]

What is the different from Tech 21 SansAmp Para Driver DI Active Direct Box?

[@faresb7104]

slight difference , the paradriver is made for guitar AND bass whereas the bass driver ... well i'll let you guess it ! furthermore, on the paradriver there's a Mid control nob as well as a little bit more tweeks on it . but the main difference is the mid control nob . :)

[@xucaen]

Do you use the pedal literally "sans amp" meaning with no amp? What type of external speaker to you recommend to sue with it?

[@sweetwater]

Hello, James! That is kinda what that means, but you'd still need a power amp paired with an unpowered cabinet. That pedal is like a preamp/DI box. Thanks for the interest! Kevin Spunde, Sweetwater Sales Engineer, [phone] ext. 1732, [e-mail]

[@alonzomelchor4027]

Dose this work as a distortion pedal kind of thing?

[@ray1ashwin]

can i use this just as a di box for a guitar not a bass guitar.

[@xbreathingisirrelevantx]

Ray Bantawa yep

[@akisbestrainsounds]

Mason Likes Punk Rock great!

[@labbern]

I have a question. I bough this pedal some years ago, but it stopped working. Do you know what could have happened? I used a 12 volt fuel tank powersupply. Now it smells burned. Did it get too much Power from the 12 volt and died? or do you have any other suggestions?

[@farfenheimer]

You fried it dude.

[@labbern]

yeah! thats what i think too :(

[@labbern]

Yeah, I know that, but I have alot of other 9V pedals that I use my 12V powersupply with and they work perfectly fine :)

[@paulc8549]

cheers really helpful.

[@jonahpaz.]

I know that exist a version of this pedal for guitar but do you think that a guitar through this pedal would sound good?

[@sweetwater]

Hey, Jonah! I wouldn't suggest the Tech 21 Bass Driver for a guitar, as there are some other options for EQ/Dynamic that would be able to shape your guitar tone better. Take a look at the Tech 21 Boost Comp when you have second and let us know what you think. Thanks! Jozy Franco, Sweetwater Sales Engineer, [phone] ext. 3015

[@sacamedeaca]

Hi I use this Sansamp with a Spector Rebop 5 DLX - EMG HZ with active pre amp. Don´t know why always distort the signal no matter haow I tweak . Even with the Bass active tone controls down. then I try the Sansamp Bass DI in a passive Spector Performer 4 DLX and it is ok! any suggesttions??

[@akisbestrainsounds]

El Fefo cos its an active di box n its only meant for passive pickups.active for passive n passive for active thats how it works.

[@squidman97]

Can someone dumb this down, just a lot of jargon i don't get :P Really considering getting this cause it seems to be a staple in many bass players kits but i am still unclear on what it does. Thanks :)

[@sweetwater]

Hi squidman97! The SansAmp Bass Driver DI delivers the warmth and presence of a miked bass amp, in a convenient direct box format. Use it as a stompbox, a preamp, or a DI onstage and in the studio, for all the tonal variation you need! It can dial up big vintage tube tones, modern slap sounds, gnarly distortions, and everything in between. Three different outputs allow you to drive power amps, recording consoles, or PA mixers. Bassists, this little black box will change your perception of amp emulators - for the better! Does that help?

[@squidman97]

Yh thanks SweetwaterSound that helped lots, I'm gunna start saving for it :)

[@PhuckHue2]

+squidman97 its not a staple in my setup. that thing sucks the tone out of your bass

[@dog-thebounty-hunter3144]

+SweetwaterSound when someone comes in about to throw some cash down, Sweetwater is there! Quality? no but sweetwater is definetly here.

[@MrKredski]

+PhuckHue2 If it did, would Jason Newsted use it (among others)?

[@gigasouls95]

So is this a bass amp replacement per se or can I run this thru my amp and get the tone it provides?

[@wedontgiveasht]

+Avery Bradley It can do both at the same time

[@jdr214]

Avery Bradley if your amp has an effects loop run the out of the di into the return on the loop and your in business you can do it with really fancy distortion pedals too

[@juliusbautista6244]

Is it normal to have 'Hizz' when I boost the Drive, treble and Presence one by one and at once? even if it's just around 2-3 o'clock?

[@kyatomlinsonmsp5618]

I have the same problem

[@DoktorDurum]

Yes! With drive, you're boosting the signal pretty hard, and Presence is a lot of high frequencies. Boosting those to is definitely making loads of hiss.

[@Ryan5259m8]

Use a noise reducer pedal! There are some for like $25 online

[@juliusbautista6244]

Thanks man.

[@burningkarma]

Oh yeah, absolutely. Especially if you're running this pedal into an amp. It's just stacking EQ on top of EQ.

[@DemianVLogs]

Is this same that the rack version?

[@redbarchettta]

Can I stack this pedal's drive and amp's drive to get a heavier tone? Or it would sound muddy?

[@sweetwater]

Hello, Rodrigo! You shouldn't have any problems using those in conjunction with each other, as long as you don't do anything too wacky with your EQ settings. Coincidentally, I was actually just chatting with another bass player at work today about how he always runs two of his dirt pedals on at the same time. Thanks for the interest! Kevin Spunde, Sweetwater Sales Engineer, [phone] ext. 1732, [e-mail]

[@redbarchettta]

@@sweetwater thank you! Keep the hard work on your reviews, Sweetwater musicians are amazing.

[@TheyCallMeNoName34]

So if I just bought a Ampeg SVT 7 Pro and the Ampeg 4x10 hlf cab to go with it do I still need to use this pedal if i'm not running it threw a p.a? What would you guy's do? Most shows we have been playing at the p.a sucks to begin with so we just normally end up using our own amps etc etc.

[@wedontgiveasht]

+SoseBass 11/2 You could have both, use the XLR output to plug into the soundboard and use the parallel output to go into your amp

[@nathansantos.n8]

does anyone know what the equivalent preamp for electric guitars are?

[@tjrails]

Sansamp para driver

[@m3ntallyabsent]

So I'm new to bass. Laugh at me for asking this if you'd like. Not sure if it's completely ridiculous or not, but would I plug this into my bass head? Does this act AS the bass head/amp? Or is this something to plug into a computer for recording?

[@joshstarkey8883]

Well, I know I'm 4 years late, but just in case I'll answer. The answer is... yes, to all of those, depending on how you use it. You can use it like an effect pedal before your amp or in the fx loop, you can plug it into the the fx return and replace your amp's preamp with the sansamp, and you can use the xlr output to record or when playing live.

[@basserwoohoo]

whats the difference between the bass driver and the para driver?

[@burningkarma]

Paradriver has Mid Controls.

[@Christianonbass]

burningkarma The Paradriver is designed to use on Guitar or bass. You can up the midrange on the Bass Driver by turning the Hi and Low down. Just an FYI that you probably knew already :)

[@the_sin_music]

Can this replace an amp? I'm between using this only or using an amp

[@sweetwater]

Hello! In a way, yes. Hence the name "sans amp," like as in "without an amp." It's meant to mimic the way your bass sounds running through an amp, and provide a DI signal out to the FoH, or to your recording interface. Thanks for the interest! Kevin Spunde, Sweetwater Sales Engineer, [phone] ext. 1732, [e-mail]

[@bassboyj468]

Does this plug directly to an amp, or no? If no, then how does it work?

[@sweetwater]

Hello! You can run your bass through this and then into your amp, and also use it as a DI box to go out to a board, or into a recording interface. Thanks for the interest! Kevin Spunde, Sweetwater Sales Engineer, [phone] ext. 1732, [e-mail]

[@shyrowstand]

depends what kind of bass you have

[@jamesclark131]

cant wate for my swiss armyknife to arive. I mean my sansamp bass driver DI. ive got a fender 40 W amp, gonna hook that into my pj passive bass and maybe run the zoom pedal as well. all into this box, wooh. great times. cant waight.

[@danielmendez3098]

is it an active or a passive DI box??

[@sweetwater]

Hey there! Thanks for hitting me up about this. This DI is also an active preamp as well, with tone control and blend. It must be powered with 9volt battery, wall power, or through 48v from your mixer. Mickey Cushing, Sweetwater Sales Engineer, [phone] ext. 3024, [e-mail]

[@joelalexander4513]

This video rules. This should be just as viral as anything else, except not some depressing, sucky, angry talking point for American politics,..no, no, NO. This is just about a sans amp, and how you can comb your sound in like a street car driver at night, never looking to get pulled over, but always wanting to...how you say?...rock??

[@Andrew_suspended_in_time]

question: do I need a 9V or 18V DC power supply?

[@martinXY]

Andrea Pasianot 3:00 dc power supply, 9v battery or through the xlr

[@gabriel-ey6bi]

can I use this on a fender rumble 15 v3?

[@2chinggis]

Absolutely, just set all the EQ on the amp to as flat as possible (probably 12 o'clock) and use the pedal as a preamp - for the first time, start with the amp volume set low until you know what to expect. If possible, spend a bit more and get the programmable version: then you can easily switch between your favorite sounds without having your amp right next to you. I have one and it has really transformed the sound from my amp ( Phil Jones Bass Cub). It makes me want to play more.

[@j1968salcedo]

lo mejor tengo este pedal ufff

[@NeedyForMusic]

Will this work fine with an active bass? I've read that active di boxes go better with passive basses.

[@diegovillasmil3383]

+NeedyForMusic I use the 3-channel programmable version of this on an active bass and it works great!

[@bochafish]

A year later... but. In my personal experience this pedal is great for active basses. I've also owned the VT pedal, and it did not jive with my stingray, but was great with passive basses.

[@OnlyHumanRecordings]

But does it djent?

[@trae1193]

Jason Newsted

[@darthnihilus_cl4319]

This was I was looking for

[@constantreelfilmproduction5635]

you look like cris angel without eyeliner

[@salvatorecirchetta5801]

The best

[@dangorche]

is very good, tasty sound

[@elonmush4793]

sounds like 2012, I don't know why people still love those boxes so much

[@potatoheadhaoy]

for us non-bassists, it's easier to have a box that does a workable, easy bass tone than spending hours tweaking shit to get your bass to sound right.

[@lagiator]

Great product but 250€? Just get a Behringer BDI21. Doesn't sound the same but it's good for the money.