Tech Tips with Lindy - Part I

[@RsqSqr]

Lindy you are a such a gem, humble person, not hiding any information and letting us know everything. I wish I could be your student.

[@gjtube37]

That was amazing! Thank you for all of that great knowledge!

[@biffelliotforpresident]

What a genuinely cool and gracious guy.

[@aveil1345]

This was very helpful, thank you, Lindy!

[@brianknickerbocker8518]

I have never heard that description of the difference between humbuckers and single coils before.Thanks, makes perfect sense.

[@danielb5081]

To expand on what you said: 'back in the day' (i.e. vacuum tube TVs & radios etc.) at electronic trade school the instructors always made a point to explain that solder is there to prevent oxidation and corrosion of an already secure mechanical connection. However, when dealing with modern surface mount devices that is not possible and solder is the only way to secure the connection . . . which is why I sometimes had to re-flow motherboards on laptops with hot processors (or any hot components on PCBs) and poorly designed cooling. Or the laptops were actually sitting on a user's lap and the cooling vents were blocked. Even with the post vacuum tube so called solid-state TVs (actually hybrid cuz they still had picture tubes) I saw a lot of arcing burned out connections with Molex connectors and the like in TV horizontal and vertical (yoke) driver circuits. Same with audio amp power transistor output stages. Even with modern components there are also PCBs in many of the newer 10,000 Megawatt (I exaggerate for effect) hybrid 'tube' amps . . . But not the million-dollar boutique amps. Again I exaggerate for effect . . . but they ain't cheap High production flow soldering was not enough in many cases and you had to sometimes get a bit creative when repairing. I always checked any such connections did a bit of preventative maintenance. I charged for it but informed customers (sometimes after the fact oops) and there were always some assholes that that didn't appreciate it and accused me of padding the bill when in fact I was 'doing them a solid'. I thought that's why they were referred to my shop in the first place. I always figure I have the gear opened up on the bench and really getting intimate with it - so why not spend another 15-30 minutes touching up some problem prone connections while I'm in there. . . . . but I digress . . . Awe hell, since I'm already off on a tangent . . . Do you know how to get a musician to pay for his amp repair before you let him take it with him (vs. waiting till he plays the next gig)? Get the money from his manager (i.e. one of the guys in the band's girlfriend). Do you know how you lose a friend? Charge him a fair (fucking LOW 'friend') price for labor and parts at cost for an ASAP emergency repair he needed done yesterday. So you end up spending a beautiful summer weekend inside your basement doing the work while he's outside partying at the lake . . . . I'm not bitter that's the kind of friend I want to lose. LOL. I haven't owned a repair shop for decades. I only repair stuff mainly for myself but sometimes (as seldom as possible) for family and 'friends' . . . don't even get me started on doing repairs for family . . .

[@stevenpotter-en2me]

Thank you, LINDY! I am a believer in your Pickups. I'd played several guitars with versions of your Pickups in them and honestly,they're all great. Finally, I was able to purchase my first set of New LINDY FRALIN BLUES SPECIAL TELECASTER PICKUPS! I'm excited, buddy. Big deal for me,and I'll be installing them in the next few days. Waiting on new Tone Caps. You keep them coming out,please. Take care LINDY

[@kauairalph108]

Thank you, Lindy, i wiI just got my bassplste yesterday. I just found this video for the installation. Mine has the tape on it all ready. I am probably going to tin the ground wire first so not to disturb the solder on the pickup ground fragile wire. Thanks again for sharing your knowledge so freely 😃 Aloha Hare Krishna 🙏

[@thseed7]

I love these videos just for Mr. Fralin's insights. Love my Blues Specials and UnBuckers

[@swordfish1120]

For being an off the cuff video this is excellent information. Very clear description and the visuals are great. Looking forward to watching the rest of your vids.

[@mikekefr]

Just ordered a blender pot via your business #,i've been reading up on this blender thing since last friday when i bought this MIM im tweaking,love the guitar and plan on making it my own poor mans version of the Eric Johnson model.I spoke with Paul and he suggested the Vintage Hot set after determining what i want out of the guitar,just wanted to thank you for putting such time and effort into your videos,very informative.I look forward to doing future business with you and getting this MIM hot

[@vltjd]

Nicely done. Thanks, and thanks for making the best pickups around.

[@thouston0]

A couple of years ago, I sent the bridge PUP from my original '72 Strat to be re-wound by you (I had installed a Dimarzo Fat Strat). The original PUP was damaged when I self-potted all the PUPs. Now I want you to rewind the other PUPs, the potting I did was terrible and the PUP you fixed sounds great, plus now I've learned to solder the leads once I get the PUPs back :).

[@Imoutanames]

Just Finished a Strat build with a set of Blues Specials w/Bridge plate......WoW!!! Nice pickups & Nice guy that Lindy Fralin!!!!

[@georgewilson1354]

Thanks Lindy, I just ordered a set of Firebirds from you. First time Fralin user, went with you over Lollar. Cant wait to get them to put in my Firebird style project kit guitar I built.

[@rocksimpson4800]

Awesome, I just found you by accident. You rewired a pair of vintage Tele pick ups for me years ago. Still own that '55! Sounds incredible! Billy Chapman did the re fret sent you the pick ups. Thank You! Great Job!

[@marsattacks7071]

Thank you Lindy ! Very informative video; simple, effective !

[@peerhauser]

very informative. learned a lot. I researched some more about the wave humbucker effect and came across the article "Das Klang-Mysterium der Humbucker-Modes" unfortunately in german, which states, that there are comb filters working, depending on the magnetic width of the pickup. So maybe not only one wave lenght gets eleminated by a certain width, but a whole filter curve.

[@meadish]

Useful. Thanks Lindy!

[@dre4011]

Lindy you are the man!! I'm comin' to see you & Zach soon... (for my '69 custom Strat & my '97 Jazz)......

[@PedroGerardo]

Wise tips from a great tech!

[@user-lj3tg4nk3e]

Thank you for an excellent video. And thank you for pronouncing "alnico" correctly and not saying "al-nee-co". That alone made me subscribe to your channel!

[@jamesrichardfield-mitchell4447]

If only people in the us of a could pronounce solder properly! SODERING?

[@jackcash3362]

Thanks for this video. Love your pickups.

[@cardbored_]

Have a set of "Stock" tele's in one of my tele's and a set of "Vintage Hots" in one of my strats, incredible sounding pickups.

[@michel333100]

Hi Lindy, just wanted to ask you a question. I have your blues strat pickups in both of my s strats. How do I get that really quack sound in the number 4 position. The bridge and middle pickup combination? I can't seem to get much quack as opposed to some videos by some other people on you tube.

[@Bluesmaniac60]

Hi Lindy, I know your busy but i just purchased your p-92's for an Epiphone Dot, 8000/9200, (replacing wire harness with 50's style pots), is that a good choice for a clean "chimmy" tone that the P-90's are known? Thank you.

[@pleximanic]

@FralinPickups Thanks for the ultrafast response! I am especially interested in how the screwcoil sounds on the neck pickup! Thanks for these awesome vids!

[@mikek7381]

I have a single coil pups that have about a quarter inch thick magnet across the bottom. Am I able to add a base plate to those, or do they only work for pole magnets?

[@ronfrey5327]

Thanks indeed so well explained... Im trying to get more of a natural taper on volume pot and I was trying to wire super switch where neck and bridge were on in pos 3 and in 2 and 4 as normal middle bridge middle neck. The blender is neat I did get some ordered in to try the only thing is what if you like oo2 on bridge and o47 neck middle ? I am used to having 2 tone pots working independently for some reason thought this could be done with super switch but so far not working right. I did wire the magic cap in on bridge paf finding that interesting tonight ! more mids indeed and no harsh or shrill highs but you can dime it on 10 tone pot wise and its pretty great there or around 7,8 tops.. I might like 22 there better more used to that on paf in bridge I have another Hss style setup but its got rails in neck and middle and they are too dark. So I want to try a 15 on those neck and middle and 22 on bridge.. As for SSS setup im wanting to try .002 now in bridge taking ice pick highs out but leaving more sounds... from 0 -10 indeed did make the string thicker sounding.... OH I found a Decade box same as the one your demonstrating its en route now.. Makes me want to setup another Tele and or strat with no cap on tone pot and be able to try those on the fly to record or demonstrate with. It also occurred to me why not take these other caps im trying and if I dont like them wire them in another box to demonstrate caps such as paper in oil or poly side by side to hear the difference.. I found the .047 paper in oil caps too warm so went to orange drop in the neck 047 and its perfect. I used your 15 magic cap in bridge and thats a 57 paf so its pretty neat usable tones from 0-8 or wide open on 10... I notice that if im on bridge but just playing near 1st -9th lets say the mids really come out there sounds way better to me but Ill try 22 fralin cap there just to see.... Ive got two HSS style guitars same make same maple neck ones in standard ones in Eb. One has stock paf in bridge and two rails in middle and neck. Those are Dark so the other 15 I think is going there and the 22 will go in bridge. I might be swapping the 15 off the bridge but Ill just wire the other HSS with 22 on bridge and keep 15 on other both paf style pickups... compare contrast.. I loaded a different set in the 2nd one 63 style single coils and 57 paf. Now I like the one with single coils in neck and middle better..... So if the rails brighten up with the magic cap thats another sound but closer to what I like there. I do not like the taper on the volume pot though in those HSS style guitars im playing I have 680 and 150 tied on this one think its 500k 250 and 500 in those guitars wondering what to make that pot smoother more gradual taper for swells ? Also I gather if I wanted to try blender pot and I had super switch its just wiring the wires to switch bridge or neck. Id like to hear the 57 paf and 63 strat neck blended Might just go back in try it but I like 22 on 57 bridge and 04 7 neck middle on other. cant do that with blender. must be way to wire in 3 position having bridge and neck come on..

[@blueskycrying]

love your shirt i played with Deke at the double door in Charlotte NC years ago

[@jonmichael02302]

You sir are a legend!

[@mojitojim]

Excellent info! Thanks a bunch!!!

[@joedirt7640]

I have 3 questions I’m hoping to get answers on. On the back of old fender pickups, winding wires are vulnerable to damage, especially on the very exposed edges of the lower fiber bobbin plates. (or plastic on modern ones) Is that exposed wire on the very edge just the extra coil wire brought around from where it is already wrapped around the wire lead-outs at the coil side of the plate to simply end conveniently in the assembly process? I have not had to find out yet simply because I have not had to repair any pickups....yet. If you damage it at that point, will it open up the pickup? Those are very delicate wires exposed in a very bad place and can be easily damaged during installations. The other problem that people can miss is that those exposed tiny little wires can come in contact with any shield, whether it’s copper tape or some just shielding paint and can cause a pickup to not function. Do Fralin pickups have grooves on the bottom plates to lessen the likelihood of damage when you sell to general public customers?

[@jennyfralin357]

Our Tele neck pickup does have grooves for the wire. The brass eyelets in the bottom fiber plate are for the beginning and end of the coil. The wire is stripped and run through them several times, those extra wraps are there just to keep the wire tight until you can get solder in the eyelet. If the eyelet is soldered correctly, (the first wire through making contact) then you could strip the wire on the front edge away. Most pickup makers don't because it is an insulated wire and usually doesn't cause problems. This can cause problems when the second or third wire through makes the contact, then as you said those exposed wires are part of the circuit. If a pickup dies the first thing I always try is re-soldering those eyelets.

[@dasfunkateer7573]

Noticed this strat was not tape shielded or painted In The cavities! What are your opinions on tape or paint shielding on a strat?. Love you vids

[@williamrobertson1563]

Like Leonardo sitting and drawing a picture in front of you. Pure mastety of how well fralin understands how the instrument works.

[@Crashoverall]

hi lindy. just came here to say that i got a set of vintage hots on my fender strat and i've finaly found the sound i've been looking for. brilliant pickups!

[@ikennafunken5964]

Can you please make a coil tapping video installation with a push pull. You are the only one on youtube who makes a good example!

[@luigiricci6916]

Io uso sulla mia Strat il set Lindy Fralin Blues Special …posso fare questa modifica?

[@IntoTheBass]

Excellent Video!

[@crisjohnalvarez6036]

i have neck humbucker pickup And its too short wire, Can i extended them to my stack wire pickups? The Stock pick up is 4wires have a 1hot, 1,ground, 2 not usable ground, The New humbucker is only 2 wire.

[@daleweber2579]

Great tips thank you. Question, about the steel base plate on the bridge single coil. I have a alnico5 set from "the Stratoshpere" company that is like all parts a alternate shop sells guitar parts. What benefits will I see hear if I add the steel base plate to my alnico5 single coil?

[@Stratboy999]

Great vid Lindy.

[@1234588001]

thanks for that,keep up the good work

[@Quimerateck]

Sir Franlin, does the material which the base plate is made of change, will the effect change with it ? ( like using cooper instead of Steel) greetings

[@Quimerateck]

thank you lindy

[@AllenPinchloaf]

Hi Lindy, What would the effect be on a Pickups tone to extent the pole pieces length beyond the baseplate of a pickup.Added tone and output?Thank You kindly.

[@jennyfralin357]

It wouldn't help, the steel plate conducts the magnetic field pulling it down into the coil a little. This make the coil more efficient.

[@thouston0]

Ok, I got a royalty check and can send the PUPs. But one question, is it possible for me to just remove the pickguard with the PUPs still in and send to you? Or would you rather that I remove the PUPS (and mark which is neck and middle) and send?

[@jimraimondi410]

Lindy, I would like to install a base plate on my bridge pickup but one of the pole pieces are sitting proud on the backside. So, the plate is not sitting flat and rides on the pole piece. Is there a way to safely cut the magnet back flush?

[@lindyfralin3868]

It was pushed down with-out cutting the coil so it can most likely be pushed back up. It is a small risk though. You could drill a hole in your baseplate and let the magnet poke into it, it will still do its job magnetically.

[@jimraimondi410]

Thank you very much :) Sincerely, JR

[@drzecelectric4302]

What temp do you use? i'm always afraid of setting it too hot and hurting the parts...

[@jennyfralin357]

I use 750 when soldering terminals and 850 when doing the back of pots. Where you have to be careful with too much heat is chips and printed circuit boards.

[@wojciechstecyszyn6040]

Hi. Can this plate be add to a ceramic single coil?

[@Samuelsonfranz]

Hi Lindy, Thank you for the advice. Do you make a 500k blender pot for Gibson style guitars? Also, what pots and caps do you recommend for humbuckers? I was thinking of getting CTS 500k precision pots and sozo.022 caps for my humbuckers. How can I retain my highs and have a clear open sound in the neck and a classic rock type sound in the bridge and have a nice blend between the two? Thanks so much! All The Best, Sam

[@mccalltrader]

Nice video! I'm curious, why not twist the wires and reduce interference and hum?

[@maggiefralin1583]

Does that work in a guitar?

[@mesafusion]

Just installed a bridge split-blade blues pickup in my strat plus. Awesome! First time that I have been really happy with the tone of bridge (tried several other pups along the way). Bought a base plate as well, but I haven't install it. Is the base plate meant to be used with the split-blades? I haven't seen anything that says yes or no on this...

[@thegolfnut812]

Hi Lindy, I was looking into Bourne pots and wondered if you have ever used them and which ones. How would you compare them to CTS pots.

[@jennyfralin357]

The few I tried were a little stiff.

[@thegolfnut812]

Thanks but did they work properly? Is it worth buying them vs CTS?

[@Choudermouse]

Dang, so proud of our pots.

[@neon_one]

I've been seeing boards with a plastic thing, kind of like you plug speaker wire into, that lets you easily connect/disconnect wire and possibly capacitor. seems convenient, but I don't know if there's any reason not to do it on a guitar like this

[@jennyfralin357]

They most likely work fine, but I prefer soldering. A good solder joint has both a mechanical connection like the push-ons and the solder surrounding the mechanical connection.

[@ultramedlab]

What is the purpose of this metal plate that you put in the base of the captain ??

[@ioodyssey3740]

Tell us again about ground loops inside the guitar. I love a good story!

[@jennyfralin357]

A ground loop is a completed circle of ground wire. It becomes a one turn coil and can pickup hum.

[@ChasingTone666]

Damn you're making me nervous doing all the soldering, tinning, etc right over the unprotected surface of that guitar.

[@dannyv.6358]

Hi Lindy, do you use flux in your soldering process?

[@jennyfralin357]

We use electrical solder with rosin core. I pre-tin both parts but some of the guys prefer flux so I keep it around. Lindy

[@das250250]

A few more tips : When soldering on a guitar body , place something over the body to protect it from solder spill , heat , accidental iron being dropped , scratching . Never put anything on the guitar body like solder wire roll etc unless the body is covered up . Masking tap and newspaper .. cloth, towel , ... I've done it all before :-( so don't do what I did by accident ..

[@das250250]

@Club Soda maybe if it is your guitar not a clients;-)

[@steviebmob]

Hi Lindy, Do you have a schematic for the split blade pick ups blues neck and mid with high output on bridge fitted to 1993 standard US Strat. can't find anything on the schematics page at the web site. Thanks... Steve UK

[@spanky2964]

I gained some knowlegde from this video Thank you.I have to ask though,what happened to your finger?Did you get into a fight with jason lollar?I am sorry I could not help myself>

[@skunkfromcamden]

Whats the difference between steel and zinc plates, Mr. Fralin?

[@lindyfralin3868]

+Rui Miranda I'm not aware of any use of zinc plates.

[@Samuelsonfranz]

@FralinPickups Great! Thanks so much!

[@keithg1313]

I agree with you on the p90's. I've always thought that humbuckers were the way to go for that thicker sound, but I missed that deep rich tone you get from your strings. I'm guessing the mids and treble are dropped out in HBs. Not entirely sure about the science behind it. It's just what my ears tell me.

[@joedodge1]

Lindy, All your vids are great. I was wondering if you could recommend a set of your pick-ups for a Fender Texas Strat. It has a humbucker in the bridge and two single coils. I was looking at your hum canceling singles but what about for the bridge? Thanks in advance.

[@1234588001]

hi what make is your soldering iron great vid thanks

[@jennyfralin357]

I use the Weller W2s (this one) or Edsyn.

[@NudnikShpilkus]

LOL! We have the same Weller soldering station....

[@NudnikShpilkus]

Got the Split Rail parts Friday. Installed in my VZ Custom Tele and sounding great! Paired the pickup with a Lawrence L202TN I happened to have in the spare parts drawer, and loving the combination. The 5-way super switch gives me all the 4-way switch tones, plus "1/2 out-of-phase" (OOP with a cap trimming some of the neck's lows), which gives a wonderful, snarky midrange-y tone without losing too much of the bottom. The guitar really wants to play Lowell George/Robbie Robertson style funky country-rock kind of stuff....

[@juliocavalera9293]

hello sir thanks for the inspirated video, can you help me, i have 3 humbucker pickup and i want to wiring with 2 500k vol pots & 1pushpull tone , hope you help how to wiring, thanks

[@bobbarcus8310]

What if you used a bar magnet as a plate?

[@pleximanic]

I can't find a demo of the Unbucker pickup!

[@ramonsalgadoboo2969]

Thank you

[@44numskull]

Lap repair. Been there.

[@LuisMorales-xr1gm]

Lindy is like the Paul Reed Smith or Steve Jobs of Pickups. What a lesson in Pickups from such a Pickup genius

[@danielstein5290]

Well crap...i used solid strand...but still hasn't broke after almost a year (79 gibson the paul) You re-leaded my t tops lindy, WAY better than my attempt that worked for a few months

[@ioodyssey3740]

Yeah, it's not going to. LOL

[@shlushashlu]

can fender lace pickups be repaired

[@jennyfralin357]

I honestly don't know, sorry. Lindy

[@wesleymorris1]

I use a thin layer of silicone on my base plates and never get sqeel and its easier then waxing.

[@marklowe7431]

You should always be using an exhaust. Especially if you're doing this all the time. It's important you're around many more years to keep making the good stuff.........

[@jennyfralin357]

We do at every soldering station. You should also wash hands after handling solder before you touch food or your face.

[@codylovesnoise]

Viva lead solder!

[@greengenie7063]

Don't do soldering, without protecting the guitar body from splatter! I find a small fan, arranged to move the toxic fumes away from my nose is sensible too.

[@MrVanalen]

Wrong /run the solder under the iron tip/

[@samgpta]

You're like me, you get 10% off at the manicurist

[@Ibaneddie76]

I would be pissed if that was my guitar he was working on, if it's his own guitar cool, but working on it on your lap, no cover for the little super hot pieces of solder that spit all over the guitar when you are wiring and I've done a ton of them and it gets everywhere.

[@lindyfralin3868]

You are right, it is my guitar. I only work on my own guitars and don't pretend to be a guitar builder or repairman. I have been soldering so long and have the right equipment that I never drop any. The key is to use as little solder as possible and shake off excess before bringing the pencil over the guitar.

[@jameskrys5286]

Here's a tip. If you are soldering over a guitar body, protect the body with a towel. Solder splash will ruin paint.

[@jennyfralin357]

You are right, I tend to only work on my own guitars

[@Incuensuocha]

Mmm

[@よしき-m5i]

いも半田だな。

[@69kpm]

Yo there Captain Midnight that 80 watt is a great way to take shit apart really fast! I use 40 watts at the maximum. I don't have people like you do. You are messing with the minds of the young people. Why would you tell the kids to take their PJs off to solder? Never sit close to the tv like Captain Midnight said kids.

[@maggiefralin1583]

It's regulated to whatever temperature I set it to.

[@survivalmadness]

Great video!