BNC to ethernet connector I PV balun +terminated Ethernet cable for AHD CCTV Installation

[@Phavouriteinstallations]

Can it work for more than 5 cameras, since the adapter is used or can we cut the power clup and join to d adapter

[@Tech_Inside_Out]

It can be used for more than five cameras. If you would have to install more cameras, you need a single large power supply unit

[@hrithikmondal9328]

What if I use a NVR instead a DVR? Also can I connect a AHD camera to NVR?

[@Tech_Inside_Out]

No, NVR is used in IP Camera installations. DVRs are used in Analogue or AHD installations

[@SVNJACK]

This works with the dtv signal?

[@Tech_Inside_Out]

Please what is dtv?

[@SVNJACK]

@@Tech_Inside_Out the antenna signal (digital TV) . Used in the the terrestrial TV transmission

[@ComputerLab-p6i]

thank you very much but I have a question what could cause the no video problem and how can I fixe it

[@Tech_Inside_Out]

No video could be caused by a number of things 1. Bad video cable termination 2. No power supply to the affected camera

[@emmawilson2799]

Do I have to buy 12V power supply for more cameras.

[@Tech_Inside_Out]

You can use one large power supply unit that can cater for 9 , 16 or more cameras

[@tekulanishanthrao6281]

I have a camera with video balun. As shown in the video if I connect the bnc from the cameras to the poe and then to the nvr from poe will the cameras work? Cc cameras-->>bnc to ethernet connector16 port poe-->>NVR->>Router. Will this circuit work.?

[@Tech_Inside_Out]

Cameras with BNC cannot be Connected to NVR because you are using A BNC to ethernet Balun

[@WesleyFerreiraVideos]

Can I connect the blue cable to wifi router? If possible, would the energy reach the camera? 🤔

[@Tech_Inside_Out]

No, the router cannot power up the camera

[@Kleshownica]

@@Tech_Inside_Out but if I connect PoE injector to it?

[@charlouoperana3954]

Hello brother your video is informative... May i know if this set up works on all types of cctv camera even the cheapest one? I am a new installer of cctv. How many pixel should a cctv camera have for it to work? Thanks and more power

[@Tech_Inside_Out]

It works for all resolutions. Thanks for the compliment. You can find more on my channel at www.youtube.com/@Tech_inside_out

[@LanceRazon]

Is this setup reliable for long term use?

[@Tech_Inside_Out]

Yes, very reliable

[@swaggst]

That's the setup I've been using for a while now, image more clearer than traditional bnc and power connectors

[@LanceRazon]

@@swaggst thanks ive chosen this setup. What is the max lenght of the cables can be used with this?

[@mattalido4884]

It can use on hikvision 2MP camera?

[@Tech_Inside_Out]

yes, you can use it hikvision

[@camporeynan1007]

Hi...sir... in this set up how long ethernet cable canbe used? can i used 300 meters?

[@Tech_Inside_Out]

Maximum, 100m

[@stephenmoroke1241]

Simply and less time consuming.What if you have multiple cameras,how you gonna power them up? Thanks🤛🏾🙏🏽

[@Tech_Inside_Out]

For multiple cameras, you can use the normal cctv power supply and fix the dc power Connectors at the ends, which will feed into every camera

[@stephenmoroke1241]

@Tech Inside Out Oh yes.Thanks, new in security systems.The world need more people like you.

[@harry1583]

Hi, I have a question. I have an IP camera, would I be able to connect using this to my DVR directly?

[@Tech_Inside_Out]

No, this is for use on AHD or analogue cameras

[@nickp546]

I have analog camera and ip cameras but i dont want to keep using 2 dvrs so can i use this to convert the analog to ip dvr and us one dvr like that will all cameras still work

[@Tech_Inside_Out]

No, this cannot convert analogue cameras to IP cameras and vice versa. But you can get a recorder that takes both IP cameras and analogue cameras.

[@nickp546]

You have any recommendations for them and i can see on phone live or playback

[@Tech_Inside_Out]

@nickp546 Get a Jovision brand, it's proven and tested

[@qstroud]

I need a device to do this a little differently. I have the “balloon” piece but my dvr has rj45 ports. How can I make this work?

[@Tech_Inside_Out]

Since your device (NVR) has RJ-45 ports , you don't need a balloon. You have to connect the RJ-45 directly to the nvr

[@gboomg5800]

@@Tech_Inside_Out what if the NVR is not poe capable? will this be a problem?

[@Tech_Inside_Out]

@@gboomg5800 All NVRs with ethernet ports for connecting cameras are POE NVR.

[@gboomg5800]

@@Tech_Inside_Out Right... Thanks for the high quality and informative videos.

[@gboomg5800]

what of the IP address for the analog camera? guess I should just test it out

[@yasmani421]

if the DVR have ethernet connectors, can you plug it directly without using the balun?

[@Tech_Inside_Out]

A recorder with ethernet connections is an NVR. They take the ethernet connections directly

[@kestermartinez]

Is the image quality better than the normal coax wire?

[@Tech_Inside_Out]

They are the same when all setups are properly wired.

[@This_Planet]

good morning - thnx for this. think its a good way as sometimes you want to switch a camera to ip and then the ethernet cable will already be in place.. good. But one question could someone connect an IP camera at the camera end and skip the PV balum. and what is the maximum distance using this method.

[@Tech_Inside_Out]

The recorder used in this process is a DVR which is meant for Analogue or AHD cameras. You can use IP cameras at the ends of the cable. Maximum cable distance should not exceed 100 meters

[@aryadeckymagangga8664]

UTP cable used straight or cross ???

[@Tech_Inside_Out]

The cables are straight through.

[@HH_208]

Hi, I have a poe switch which powers 1 ip camera which is also connected to my dvr. I have a hikvision poc camera and was wondering could I connect one end of Ethernet cable straight to my Poe switch and then on the other end use the coax to Ethernet for the camera. Will this then make the camera an ip one?

[@Tech_Inside_Out]

No, POC cameras need to be connected through the BNC since power is fed into the Camera through the BNC. The use of the PV ballun does not make the camera an IP camera

[@orangeduc3129]

With this setup how can I add Batery backup provider for the nvr to power during light out, using the 12v dc provider with battery please

[@Tech_Inside_Out]

You can setup a battery bank with a hybrid inverter to power up the system. That will even last longer than the smaller battery type you find in power supply units. I will later cover that kind of standby power for cctv cameras

[@orangeduc3129]

@@Tech_Inside_Out okay thanks for your info I really appreciate this since power off and on is a problem here. Thanks we will wait for your video on this

[@orangeduc3129]

@@Tech_Inside_Out please thanks for your reply hope you do a video on this soon please thanks

[@orangeduc3129]

Can I loop the cat 6 cable to connect 2nd camera on the way??

[@Tech_Inside_Out]

Since the cables are terminated with the RJ 45, am just wondering how you could loop it? I will be glad if you can explain it further, may i don't understand the question.

[@orangeduc3129]

@@Tech_Inside_Outplease I wanted to save cost of the cat 6 cables running from each camera back to the nvr,

[@RLTango]

Thank you for the demo! Have you noticed a drop in video quality between products? Amazon has a lot of options and a big variance in price.

[@Tech_Inside_Out]

Thank you too. Yes, the video qualities are different from one manufacturer to the other even though they say the same specifications. Very difficult to explain.

[@orangeduc3129]

Please can I loop all the power cable together and give them one adapter if connecting 8 cameras please

[@Tech_Inside_Out]

That may seem to work, but that will manifest in lines in the face of your cameras due to power deficiency to your cameras. So for very effective and clean pictures, it is good to avoid loops

[@orangeduc3129]

@@Tech_Inside_Out Aww please please thanks soo much we’ve payed installers to fix one of the cameras having lines in the face of the camera after every night mode switching or power off reboot but no answer ,change the cat 6 cables still no answer. Ohh thanks please much . All the power were loop 🔁 together for one adapter. Please thanks best wishes for your kindness and good work.

[@SeoPhilippinesAlexisAspi]

it its okay to use Cat6 cable

[@Tech_Inside_Out]

Yes, its a good choice

[@roycash-t8o]

what about using a 200meters plus ethernet cable?

[@Tech_Inside_Out]

It is not advisable to run cat 6 cables beyond 100 meters.

[@mdasad6738]

What type head for cat 6cable RJ 45 or rj11

[@Tech_Inside_Out]

RJ 45

[@malajl]

Est ce que possible d'installer directement avec Switch poe ? Juste le transmetteur avec le routeur , switch ou nvr ?

[@Tech_Inside_Out]

Non, il s'agit simplement de l'utilisation du Cat 6 pour transmettre de la vidéo analogique, vous ne pouvez donc pas utiliser de commutateur POE.

[@discoveryelectronics9966]

can i use ip camera convert into BNC DVR with using this converter

[@Tech_Inside_Out]

No, you can't convert IP cameras into BNC and plug into DVR

[@wuchenfei2722]

@@Tech_Inside_Out How about if you use a pair of these, to connect an IP camera and an NVR using coax cable?

[@developer2925]

What if i connect rj45 direct to switch ?

[@Tech_Inside_Out]

No, that wont work. The camera is analogue and its output is just a pair

[@timothy1837]

May i know the maximum transmission distance of that set up using lan cable?..

[@Tech_Inside_Out]

The recommended Maximum Cable length for network cables is 100m, but Cable quality nowadays are quite an issue, so you may have to do 60 or 70m for best results unless you are too sure of your Cable quality .

[@Tech_Inside_Out]

The recommended Maximum Cable length for network cables is 100m, but Cable quality nowadays are quite an issue, so you may have to do 60 or 70m for best results unless you are too sure of your Cable quality .

[@timothy1837]

i see... thanks so much for your reply...

[@Tech_Inside_Out]

@@timothy1837 Most welcome

[@Miley_00]

Can I use this to connect the BNC camera to a Ethernet switch/poe to my PC? I subbed thanks for the help!

[@Tech_Inside_Out]

No, you can connect it to your pc without going through a DVR

[@samlopez2314]

How about the other way. Bnc to internet ?

[@Tech_Inside_Out]

Please let me know the details because in the other way round, IP Cameras serve the purpose of the need without using any form of converter.

[@ibrahimrahman-1]

Really good vid! Really helpful!

[@Tech_Inside_Out]

Glad it was helpful!

[@WanAkmalMediaStudio]

Very good explanation. I love it

[@Tech_Inside_Out]

Thanks very much

[@ReutersKiprono]

Thank you for your explanation

[@Tech_Inside_Out]

Thank you

[@jhonty72727272727272]

How to connect 4 or 8 camera using PV bulon

[@Tech_Inside_Out]

The process is thesame. Just follow how the single one is done and do the rest

[@feleyunibanda7948]

Thank you for these videos

[@Tech_Inside_Out]

Glad you like them!

[@valdecirjosemaria9615]

a onde eu compro isso

[@aqibrahmaniofficial8933]

I am facing issue in video quality with this connector kindly guide me

[@Tech_Inside_Out]

Please check your cable length and also you may have to check your cable quality

[@aqibrahmaniofficial8933]

@@Tech_Inside_Out lenth is about 40 to 50 mtres

[@Tech_Inside_Out]

@aqibrahmaniofficial8933 Then check your cables and terminations, because this works perfectly.

[@davidalba6784]

And if I have an IP camera that I need to connect to the DVR using the Ethernet to BNC adapter, how could I do it? thanks for your help

[@swaggst]

We’d want to see a video of installation with 4ch passive video balun and how it works please

[@Tech_Inside_Out]

Well noted. Thanks very much for your continued patronage of my videos.

[@swaggst]

@@Tech_Inside_Out welcome it's been very helpful

[@MiguelRamirez-ld7sy]

Just learned that all I need is inexpensive cat6 cable to power a poe camera. I have the jankie bnc cameras.

[@Tech_Inside_Out]

Exactly

[@ReutersKiprono]

😂

[@Tech_Inside_Out]

Thanks