Amazing content, thanks very much. This was the method I was looking for (https + free domain + ddns) I can say that being able to do these things is like a superpower to me, and at the same time it is so easy to learn them. So far I've realized there are multiple ways to solving remote homeserver connection (without static IP and without paying for a domain): using DDNS and free domain, SSH tuneling, or just using onion routing addresses. Thanks again, and thanks youtube!
@vitiok782 жыл бұрын
Great video! Want to add that many routers have a section called DDNS that does the job of updating the IP address on DDNS provider without the cron configuration on the server
@noweare1 Жыл бұрын
Yup, useful comment
@poke67532 жыл бұрын
I followed the steps but i still am unable to accees it from anywhere
@durgaprasadreddy5033Ай бұрын
Your ISP might be using CGNAT wherein he assigns a private ip address to your router instead of a public ip address. You can check by verifying the public ip address that pops up in whatismyip website with that of ipaddress assigned to the router
@dehradundashboard-li6mt7 күн бұрын
Hi, I have setup the same for ipv6 and i keep getting dns_probe_error. The browsers keep looking for A record instead of finding the AAAA record next. What should be done? Please help.
@ravine90832 жыл бұрын
Thank you so much for this tutorial! I have nextcloud on my server and dynu pointing to my home IP (I manually typed it in) fortunately it hasn't changed in 6 mounts. I don't have have the sites-available directory, so looks like I need to watch your tutorials with Apache. I use nextcloud daily for school and I want my cockpit web interface accessable. I'm not sure if I can cancel my SSL certificate for nextcloud. Bit warden looks cool, I'll try that too. I also run Plex and both Minecraft java and bedrock servers, so this is a busy computer. I'm sitting at 90GB of RAM usage.
@cool275610 ай бұрын
Thanks for the quick and simple DDNS example you provided :)
@autobahnmensch Жыл бұрын
this was amazing, really cleared things up for me about dynamic dns, thank you!
@karl514b8 ай бұрын
Very helpful video. Question: What is the difference between installng DDNS on a computer vs the router?
@carnby242 жыл бұрын
Thank you. You are a lecturer material!!
@TechGuides2 жыл бұрын
Appreciate it tons!!
@kidpoker94082 жыл бұрын
@@TechGuides will dynamic dns help with streaming and iptv thats all i care about?
@AvengeTheTECH2 жыл бұрын
much appreciated as I'm looking into a solution to change from NOIP as a failsafe option
@muhammadan-nasdzikrullahbi97696 ай бұрын
Hi , how can i configure the applications accessible using local network as well ? I can access my applications using outside network but when i use the local network (same network as the applications) , i cannot access it , but i can access it using the private ip but not with the public ip , can someone help me ? Thanks
@bluetheredpanda5 ай бұрын
Hey dude, thanks for the videos, you're way clearer than most tech KZbinrs (esp. in the home server niche ahahah). Just curious, you never made the follow-up video to this one, did you?
@TechGuides4 ай бұрын
Appreciate it! Hmm about encrypting? I did this a while back but probably wanted to make an updated version. I will actually re-do all my Linux videos but they will be on my second channel
@bluetheredpanda4 ай бұрын
@@TechGuides oh, interesting. What’s the name of the channel? 🙏
@TechGuides4 ай бұрын
Same (old) name ;) www.youtube.com/@Tech-Guides
@bluetheredpanda4 ай бұрын
@@TechGuides Thanks, just subscribed!
@TechGuides4 ай бұрын
Appreciate the support!! Got so many awesome projects planned for that channel :)
@caspibar1 Жыл бұрын
Hi, I was wondering how to remotely access a server I use on the road that I connect to the internet via mobile hotspot. So, my setup is mobile hotspot>wireless to ethernet adapter>my device (only accepts ethernet port) Since my mobile hotspot does not provide a static public IP address, how could I use this method to get access? Thanks
@AnggaPramana-on8jw4 ай бұрын
Nice video, how about if I have bought a domain and use my own domain instead of domain from ddns provider? Thank you
@TechGuides4 ай бұрын
Thanks! If you bought a domain name its actually much simpler. You just have to point the A-type record to your public IP address. Usually domain sellers have small scripts that you can use together with an API key to periodically update that record if your ISP keeps assigning you a new IP address.
@dtm8510 ай бұрын
This is excellent! Thank you for sharing this! It’s exactly what I needed! One question however, how can I do this via powershell on a windows server?
@TechGuides9 ай бұрын
I'm sure Dynu also provides an update command for windows servers!
@molbar772 жыл бұрын
Hi guys, any idea how to overcome the issue that dynamic DNS is not trusted very much. For example my company network blacklists the DYNU domain name and IP probably because its dynamic. So I cannot reach my bitwarden from my work...
@herbervonsant51252 ай бұрын
Sir , greate video, i have so many questions.....
@kidpoker94082 жыл бұрын
will dynamic dns help with streaming and iptv thats all i care about?
@kimkuere9149 Жыл бұрын
Hi friend, i got ost when you start typing codes, bcoz i am working on windows, may you please send instructions on how do i go about the same scenario here in windows? ... i have xampp(apache and mysql) installed on my windows pc and i would like to access my server remotelly .... PLEASE HELP.
@alexzander4457 Жыл бұрын
hey can you help me asap please "when i type cat dynulog its says unkown at front of my name so what does it mean and i cant access my nextcloud throw this domain i provided why but can access on my ip i have static ip on pc
@starboardaussie Жыл бұрын
Great video on remote access ! ! Do you have any tips on best method and practices (and the most secure) to remote connect to the Proxmox VE Server Web console UI without connection going through some sort of central pipe, like VPN or Cloudflare or such. I want to connect to my Proxmox Web UI remotely as I travel a lot and don't want messy subscriptions either.
@TechGuides Жыл бұрын
I'm afraid I have absolutely no experience with Proxmox
@williamt60952 жыл бұрын
already try port check result fail. can it work with private ip? my isp don't open public ip to my router.
@Axel-ds2ob2 жыл бұрын
Hello Roman. Following your series my home network work great EXCEPT that I am unable to access Nextcloud with the URL provided by the DynDNS using a computer within my home network (or even the IP address associated to the URL). I can still access it using the local IP address or I can access it with 4G or from another network. Do you have an idea what could cause this
@usmanzafar42302 жыл бұрын
I have a static ip how i can access my server over the internet i watched your last video on nextcloud. Please help me 🙏🙏🙏🥺🥺
@truecaller73272 жыл бұрын
Appreciate your efforts done on these videos , tbh i followed every step to install the NC on ubuntu 24.0.3 and finally it is woking , now following the steps of this video , and after completing all the steps and i try to access my NC using my subdomain i get 403 error, do you think you can help me with this ? i've done every single step precisely .
@seoonlyRU2 жыл бұрын
шикардосик) лайк от СЕООНЛИ
@Alreshi2 жыл бұрын
Hi how I can install an SSL certificate in my local host?
@TechGuides2 жыл бұрын
Ill be doing an update soon, but for now refer to this video on SSL certificates: kzbin.info/www/bejne/mWLXkIKofs6UZ7c
@it-expat-china Жыл бұрын
It seems that your ISP doesn't block the port 80 of your home server's IP address, ami I right? This kind of ISPs are hard to come by, usually they don't allow 80 or 443.
@TechGuides Жыл бұрын
Yeah I can easily access any port I wish on my IP. You sure its no simply blocked by your router? You will definitely need to port forward anything to you device if you want outside access
@marcrjacobs9 ай бұрын
I can get to my home nextcloud instance from my computer, but not my iPhone or tablet. Any ideas?
@TechGuides9 ай бұрын
Hmm did you happen to connect directly to the local IP address with your computer? Or does it work through your URL?
@marcrjacobs9 ай бұрын
@@TechGuides Thanks for the prompt reply, but it seems I was stupid. After my router I have an eero mesh network router that it closer to my server and it has an eth port. So, on my router I port forwarded to the eero and from the eero I port forwarded to my server. If finally dawned on me that I was complicating my life. I moved the server on to the router, changed the nic setting and the port forwarding on the router and everything works like a dream. I do have a remaining question though: I don't happen to have a spare domain, but is there a way to solve the following error: "Accessing site insecurely via HTTP. You are strongly advised to set up your server to require HTTPS instead, as described in the security tips ↗. Without it some important web functionality like "copy to clipboard" or "service workers" will not work!" Thanks for your videos, lots of great stuff for me to learn.
@molbar772 жыл бұрын
Thanks, a lot 5*! Is there a reason using Linux crontab+wget instead of IP update client of Dynu for Linux runs as a system service?
@TechGuides2 жыл бұрын
Thanks! I prefer using onboard tools whenever possible rather than installing 3rd party software
@esisolina1 Жыл бұрын
Ok. Do you have and a version for Windows tutorial video to use Dynu ? Preferable for Windows 10 or Windows 2019 server. or above.
@TechGuides Жыл бұрын
I'm afraid I'm not familiar with windows server and thus don't have a tutorial on that
@muhdbasiirzulkifle50907 ай бұрын
Very helpful! Thank you.
@TechGuides7 ай бұрын
Glad it was helpful!
@MrVmagna Жыл бұрын
Very nice tutorial. Thank you
@TechGuides Жыл бұрын
Glad it was helpful!
@Joe.95. Жыл бұрын
10:23 I use nginx, the steps are the same right?
@tjames221232 жыл бұрын
Top notch videos! Danke!!
@TechGuides2 жыл бұрын
Thansk! I appreciate it a lot
@reinelvlogz20739 ай бұрын
Great thanks for the tutorial
@TechGuides9 ай бұрын
My pleasure!
@whocares3132 Жыл бұрын
Can you make a tutorial for nginx with wildcard cert support?
@TechGuides Жыл бұрын
Havent used NGINX ever so Im afraid I lack the knowhow to make a useful video
@managersoft4512 Жыл бұрын
Sorry for my stupid questions but. Is it possible to do the same on Windows?
@TechGuides Жыл бұрын
Not stupid at all! Do you mean for a Windows Server? I'm afraid I have absolutely zero experience with those...
@KabeeshSАй бұрын
How to know my home server ip address?
@TechGuidesАй бұрын
Public IP? Type 'ip addr'
@joseeliseu82106 ай бұрын
Great video
@mad7505 Жыл бұрын
Can i use this to remotly access my RPI?
@TechGuides Жыл бұрын
Yes well it depends what exactly you want to do?
@autobahnmensch Жыл бұрын
Thanks!
@TechGuides Жыл бұрын
Wow thank you so much! Glad you liked it :)
@netbin Жыл бұрын
For those who are behind CGNAT this is not going to work...
@muhammadrazanraukhillaharr67122 жыл бұрын
Is it safe for use this for my personal server?
@TechGuides2 жыл бұрын
Yes absolutely. What are your concerns?
@Parad0x_SL2 жыл бұрын
Can you do a call of duty vanguard graphics video please? Lol
@EdwardJohnson-o6i4 күн бұрын
Lopez Barbara Taylor Nancy Taylor Ruth
@federicomilano52727 ай бұрын
DYNU IS A SCAM!!!!! THEY STOLEN MY MONEY AND MY BANK BLOCK MY CARD! SCAM!