Getting Started with A9G Board | GSM + GPRS + GPS 🔥🔥

[@techiesms]

Suggest below about which controller board should we use for our Smallest GPS tracker project 👇🏻 . Also you can get this board at the CHEAPEST price on Internet techiesms.com/product/ai-thinker-a9g-gsm-gprsgps-bds-development-board/

[@siva7702]

Please go through it with microphone...

[@enredao_electronico2737]

Almost any economical 8bit microcontroller would work … depending of the features you may want . Most of the standard GPS trackers are programmed through SMS for several reasons . You may have a SIM with internet enabled but you need to set the APN and serverIP/port to the device in order to work. Some standard features ( coordinates are most basic) are setting time zone, GPIO handling for door or cut oil, power cut alarm , ignition sensing etc. Also you would need to set low power conditions when it is stationary or not connected to the battery. So depending of which features you have in mind , would impact in microcontroller selection and budgeting. For IOT application I do prefer GSM over WIFi since would be online as long is battery powered and cost of data cost around $3 usd a month for 50mb. Most of high end trackers ( with several functions and sensors ) won’t use half of it sending burst of data each 30secs.

[@29murlikrishna]

was a life-saver. Thanks a lot.

[@abhiramanne9649]

Hats off to the hard work you do.

[@sharukhrahman7925]

dude next make a portable project.. i think this is the smallest feature pack module yet right?? also put some speakers and headphone jack and make it more funky project..🤣🤣🤣🤣

[@maazshaik6514]

Using this A95 Module can you please make home automation, use sim card so no need to use wifi for home automation just insert the simcard.

[@kartikmalik91]

Great video as always. Could you also make an updated video for getting custom PCBs printed and assembled? I know you had made one 2 years back but just wanted to get an updated one. Also could you talk about the custom charges if ordering from Jlcpcb.

[@samjohn1063]

Amazing crack, and the tutorial was perfect. I´m testing it right now

[@techiesms]

Did it work?

[@phinok.m.628]

If you're trying to make it as small as possible, why use the A9G as an AT modem, with a second microcontroller, instead of programming the A9G directly? Unfortunately there is no Arduino core for it (yet at least). But there is a pretty good SDK with a lot of examples. I've worked with it before and it's not the difficult to get running. And the A9G has a pretty powerful 32 bit microcontroller on it, running at 312 MHz. So you would probably be hooking up a less powerful microcontroller to it, if you used it as an AT modem. Which would be kinda dumb...

[@techiesms]

We will be trying that really soon Share some important links for that examples

[@mzwenkosihlela7989]

HI PLEASE CAN YOU SHARE LINKS

[@drengrd]

It means this device microcontroller can't be used in a full project? You still need another micro-controller?

[@jhonnymachadouseche1880]

I have a question, doesn’t it need a code for using the comands?????

[@manaspange3815]

I think you can use any Serial terminal that supports Hex inputs to send ASCII values on the Windows system. Docklight software is one of them. Great video! Please make a video on Quectel GSM modules that use OpenCPU software and Eclipse.

[@inakia1]

Thank you so much!!

[@rubialugattimoreira1978]

Always helpefull content🌹

[@techiesms]

😇😇

[@saruzpravyuha]

can you explain how to calculate current consumption in sleep mode ?

[@wjn777]

Nice video, thanks for sharing. Can you please share details on how to use the SD card functionality?

[@VaishnaviS-q6s]

sir in 12.45 in which one did u implement the code to receive message??in terminal or in arduino serial monitor?pls reply sir

[@markneiltanap]

ser how about sending the gps to a web server to see it website on google maps like seeing it move real time by a marker in google map?

[@dattatrayaapte280]

Excellent Sachin

[@dempseydoodles]

Is this a standalone GPS Tracker? Does it require WiFi or can this ping its location and can you track it with your phone or computer? Looking for a tracker for my trailer without the monthly fees…

[@nesuem]

Could you please show how to configure this board for a MQTT connecetion ? There is not much info for this device on internet

[@padigerimahendra4960]

can we do it using arduino pro mini board

[@Musicworld-rf1yw]

I'M GETTING CONTINOUS +CREG: 2 AND THE A9G BOARD IS NOT GETTING READY ? WHAT MUST BE THE PROBLEM ?

[@shakibaahmadi9703]

thank you the video was really useful. when i connect the A9G to ESP32 and connect it to the laptop, the serial monitor in arduino doesn't show anything when i press the reset button. can you help me with this please?

[@trhosking]

Since when did CTRL+Z not work in the Mac terminal? I think you are mistaken.

[@TebrihkBarem]

i don't have access to a programmer but i have an arduino uno,please how can i use the ardunio uno on my A9G board

[@vonipoy]

Sir can we use arduino to insert programs

[@muralidharnaik8489]

Ham us model ko microcontroller ki tara bi use kar sakte he kya? A9g me microcontroller he kya?

[@milindprajapati3985]

Try to use a cheapest and smallest microcontroller like this one (Atmel ATTINY414-SSNR) and also make a second video as soon as possible

[@techiesms]

Thanks for the suggestion I’ll try to work on gps tracker project asap

[@techiesms]

Connect with us on WhatsApp [phone]

[@karloleksic2646]

does board have wifi or how we conect to the internet to make get request?

[@ravirituraj3771]

Superb and very useful video. Can we make our personal app ( may be app inventer based) to track location of tracker. That way it will be a perfect diy tracker device. If possible, sachin pls help with this.

[@techiesms]

Let’s see

[@engineerskranti]

Sir Make next Video on, Build Your Own Google Home + Alexa Smart Speaker

[@ghinaaudhiyanabillah1626]

I am too sober for tNice tutorials, I'll be back later..

[@indrajeetsinha8395]

Too good

[@Jerry-zv1ko]

How can i program? i want to program this as you have done for sending msg for ever 10s .

[@wolvrG]

Nice. Use ESP8266 d1 mini. Lets try to make it as cheapest as possible. Looking forward to next video

[@-rate6326]

Esp8266 has gps module?

[@wolvrG]

@@-rate6326 ESP8266 + A9G

[@Shiva-bo7tc]

ESP 32 CAM used it, well tutorial is awesome thanks for making simple and easy to understanding videos.

[@spmoviesexplain]

the tone and control of ur voice says "I know my sNice tutorialt!". Good stuff buddy.

[@penawarsoft]

When the a9g receiving call, can a9g display the number that call it? I just only see RING... Anybody has solution?

[@StefanRivera]

Any way to get components shipped to El Salvador?

[@BlueeBubble]

Can you run Blynk on this?

[@willianchan7531]

after sending AT+COPS=? got +CME ERROR: 256 how to fix?

[@Summapanna-g3u]

0:28 plz bro MULTI PURPOSE GPS TRACKER KIT NEEDED SIR PLEASE 🙏🥺 in your website its OUT OF STOCK ❤❤❤❤❤ SIR PLEASE ACCEPT OUR REQUEST 🎉🎉🎉🎉🎉❤❤❤❤❤❤❤❤❤❤❤❤❤❤SIR ENABLE ONE STOCK FOR ME WE WERE REQUEST ❤ YOU A LOT PLEASE KINDLY REPLY US

[@tinopetersson2577]

I am able to execute the AT-commands with the A9G board, but i cannot upload any code to it. Anyone in here have some suggestions?

[@RTKN197]

how to fix the +CMS ERROR: 500 in sending SMS

[@juaninfante7000]

do you have any course ?

[@rampr4225]

Since the project is focussing on Low Power , I feel STM L series or TI MSP series or SiLabs Gecko series or Microchip PIC nanowatt series of microcontrollers can be looked into 👍

[@techiesms]

Thank you so much for the suggestion

[@techiesms]

can you suggest development boards related to that chipset you have suggested so that we can try using them first?

[@rampr4225]

@@techiesms TI offers MSP430 Launchpad (with MSP430G2553, a 16bit MCU) evaluation boards costing between Rs.1k-2k. This offers 4-5 low power modes, on board debugger to quickly get started. I think they even provide a live Power Profiling tool which is very helpful. Once your design is done, I feel you can migrate the design to a low pin count mcu......

[@rampr4225]

@@techiesms you are welcome 👍🙏

[@aronneferri5680]

Hay, please one sketch with gps SMS with gogglemaps coordinate is possible have? MANY THANKS!! Sorry for my english, bay bay to PISA

[@جابرالعلوى-ك6ظ]

I’ve cracked soft soft before twice as a kid. Never learned anytNice tutorialng to make anytNice tutorialng useful. Sad tNice tutorialng is a lot of my peers back then

[@recaps_plus]

The introduction was very helpful, thanks!

[@rollyavecilla]

Hate to burst your bubble but I have to tell you these: 1. Ai Thinker doesn't make this anymore. 2. You did not show ass ALL the features because you have not talked about how to make the TF Card work, if it does work at all.

[@abhijeetbyte]

What was the battery specifications,that u were using in video

[@drelectronics13]

Pic controller ,but as usual we are moving to 5 g and ths companys making booars still go for 2 g 😒all things of board was good just 1 thing left behind is 4g support,and soon 2 g band will be shut down and then u have a little piece of 💩

[@Anonymous-vh6kp]

I also has same problem with the esacpe characters. I ended up using Putty

[@shiv444m]

please give the code for sending messages it is not working for my system....

[@Ruhgtfo]

Sir, why use 17,167,0,0 number for CSMP?

[@Coco123-rl6ll]

Can we use this with Arduino uno

[@schoolkeepa]

how to install windows 11 arm on Lenovo y700 tablet?

[@prasanthiglory5890]

Can you please tell me only 4G GSM module dimensions?

[@shamnayse7576]

Why don't you use STM8 board...? lets try ir

[@robosale]

PLEASE GIVE ME LOACTION CODE FOR ME HELP ME

[@tallurivenkataramanaiah43]

hi bro how to connect mqtt

[@SteveMageto]

I have been following you for a while now and you content is absolutely helpful. Through you I got interest in IoT and interesting projects that I can try as I dig deep in IoT. Keep on the good work.

[@rahulb23]

Use STM32 series microcontroller

[@arsalankhan5974]

Bro i am not getting anything on my serial monitor

[@sandeepsinghjagdev3485]

msp430 minimize power consumption

[@abdoeldaory2522]

MY GMS DOES NOT soft LIKE YOURS

[@AndresRodTrades]

I've been playing on garageband for a couple weeks and just got the trial of softs. I was worried there wouldn't be any clear tutorials, but

[@zhenprod.8958]

is tNice tutorials ASMR?

[@tlotlisangnkhase9475]

Can this board provide internet?

[@Antinna]

Dude no suggestion but a request to build a Advanced 4g connected ,SMS,call submersible 2motor with 2Bentex starter 3 phase 1 phase

[@gourisankarmondal9214]

how to make post request

[@solomonkamau813]

You can have both working

[@sagero21]

Can i use 4g simcard for this?

[@battlegrounds2002]

I know tNice tutorials is an old video but I’m new and thank god I finally found you . Thank you for such an amazing and helpful video ❤️

[@rohitsangale6107]

Use the SDK provided by AI Thinker itself, you will not need any extra Microcontroller

[@techiesms]

But how to give commands without any controller ?

[@rohitsangale6107]

@@techiesms （B）SDK On Chip Development，No external MCU is needed, burn the firmware directly to GPRS module The advantage of this method is that it doesn't need extra MCU, programming directly on modules, saving hardware resources, and save mony for projects This documentation introduces in detail how to use SDK to develop and provide related API docs. The AT application source code is not included in this SDK

[@indrajeetsinha8395]

Wish I can speak with you

[@NavyaBondala]

Hi!! The video which you shared was very helpful for me. Can you please share the Arduino codes and libraries for the A9G module.

[@nfcradio4622]

Make Live GPS Tracker

[@fluiditynz]

Fantastic summary.

[@peek2much3]

you! where's the repo??

[@Ravikumaryadav06]

Sorry for being too null

[@omkarpatil-el4jk]

Can we make sim800/900 module as hotspot router.... As I want to provide hotspot using sim800 module to connect esp01 module to internet... Also want to connect esp32cam to it

[@milindprajapati3985]

when will the video come

[@chonladameetrakool9818]

THE FRUIT HAS SPOKEN

[@sbh3612]

That's i was finding

[@atikuaticulated5757]

Pls how can I use arduino board with A9G gsm+gprs+gps .I need connection diagram pls and step by step on how to configure the devices for vehicle tracking .thank you sir.

[@mrelectronrock9510]

Esp32 xiao

[@firdoshdiakus4841]

Hi my question is why you still using the 2G networks as this is becoming outdated even in a countries like Africa ??

[@stevdodd7515]

This module coast only 1000 rupees. 4g module cost around 3000 or 4000 inr

[@techieelectro]

For host mcu STM32 L series has low power consumption in sleep mode....

[@sakarcage]

Hi, I have a question. I live in Turkmenistan, our sim card model name is "Tmcell" code is +993. That is, will this sensor work in our country?

[@omtech1703]

Hi I am a junior college student tryin g to make a automatic callin and messaging system using this can . project idea is to send call and a alert mesaage when a button is pressed so can i make it using a9g + arduino .

[@brunab7661]

Hey how’s it going? My name is Bruna, I’m working on a project using the A9G module and I’m having trouble sending SMS and also with the internet… I would like to know which command you use to send SMS I’m from Brazil, my project is a tracker

[@arsalankhan5974]

can we send the message to multiple numbers ......?? and what is the range of A9g module ??

[@pierrejeanes]

You MC ?

[@sarojitkoley899]

Use ESP32 as mcu

[@pierrejeanes]

What?

[@TebrihkBarem]

i don't have access to a programmer but i have an arduino uno,please how can i use the ardunio uno on my A9G board

[@pierrejeanes]

You DJ?

[@mohitt2390]

Please complete this project as fast as possible because I'm selected for a national championship and i want this tech please

[@lyndon123]

Esp32