Techniseal Polymeric Sand for Paver Joints Installation Procedure
Пікірлер: 77
@rand49er Жыл бұрын
One of the best videos of the many I've seen. Answers most questions in a direct way. The only lingering question I had was answered in one of your comments. Thx
@Techniseal Жыл бұрын
We're happy we could help!
@dreunmason8315 Жыл бұрын
So I've only used this pressure washer one time. kzbin.infoUgkxfQauTxLT0JLSvqkq10rD79TU4k0Vz8zP The one time I used it, it worked great. I recently had new siding installed but kept the old gutters and small areas surrounding my house that weren't replaced so they looked horrible and dirty because of the new siding. I needed to get it cleaned asap. When I used the pressure washer, man it just melted all the dirt and grime that was on those areas of my house. I used that krud kutter soap and it was over after that. Easy to assemble, feels durable, very simple to use. Also, I purchased a used one to save money and there was absolutely nothing wrong with it. I want to get more use out of it so I think I'll be washing the cars and update this comment as time goes on.
@charleswilson15723 жыл бұрын
Just got done taking out the old polymeric sand on my front walk and installing new sand. Your directions were on spot on.,,,, Thanks!
@calvaryassemblyofgodsouthi80463 жыл бұрын
How did you remove old sand? Did you vibrate the new sand?
@Techniseal3 жыл бұрын
We're glad it could help :)
@NashvilleLandscaping12 жыл бұрын
I love the details in this video like the polymeric is not done curing until 90 days. Great video I shared it widely.
@Techniseal6 жыл бұрын
Thank you!
@joedoyle49985 жыл бұрын
*30 days
@NerdyMeathead4 жыл бұрын
The guy with the hose is the boss for sure. His shirt is too clean lol
@Kgio-21123 жыл бұрын
Meeda ahkey!
@GoodSupply3 жыл бұрын
Hun! Going to get a Leaf Blower. Thank god I didn’t start my project before seeing that. I got the brick layer down from a builder and it’s a year later. Time to finish the job.
@vinnybauer42052 жыл бұрын
Greetings, Still a great video. Vinny
@sgt.grinch32993 жыл бұрын
Leaf blower is key. I learned the hard way.
@Techniseal2 жыл бұрын
It is indeed :)
@v.m.43114 жыл бұрын
We used it like it is recommended but we have a big problem with ants and them burrowing underneath while making huge mess and damage to the patio. Is there anything stronger than polymeric sand to use in between the stones to prevent ants from destroying it? Thanks
@Techniseal4 жыл бұрын
Hello, we are sorry to learn you've run into issues while using this product. Please contact our technical support team at service@techniseal.com or call 1 800 465 7325. We will do our best to advise you and guide you towards the best solution. Thank you for sharing
@moselc094 жыл бұрын
under your pavers do you have weed barrier above the dirt? I laid down pavers a month ago and there was 1 section I forgot to put the weed barrier directly above the dirt. Before and after a rainstorm that section is the only section ants will burrow through and bring the dirt between the pavers to the surface. So I suggest if you can, to remove the pavers and install a weed barrier directly over the dirt or gravel, and then put the leveling sand on top. So Option 1 Dirt, Weed Barrier, Gravel, Leveling Sand, then Paver. Option 2: Dirt, Gravel, Weed Barrier, Leveling Sand, then paver. For some reason the ants move the dirt but the sand they just burrow through maybe because it dries quicker and they have more room to move through it.
@brucemoyers10063 жыл бұрын
@@moselc09 Round-Up has a product that supposedly prevents new growth for up to a year. It's pricey but if you apply ONLY to the joints I would imagine it would go a long way. Good luck.
@ChristLedwithLeyah3 жыл бұрын
We just set our perma sand today. We noticed that we have a few flawed areas that can use some more sand. It has hardened by now. Not yet 24 hours. Can I reapply more perma sand and water it again? Or are we stuck with the imperfections?
@stoneworkscanada10 жыл бұрын
Stone Works Canada installs interlock pavers from Unilock, Techo-bloc, and others in Toronto, Mississauga and Oakville and we use Techniseal polymeric sand in all installations to the highest client satisfaction
@bobojr4564 жыл бұрын
Oh yes daddy!
@jackjohnson8332 жыл бұрын
KZbin wasn’t ready when this dropped
@danbalkey25802 жыл бұрын
30 days before I can used sealers ?
@Techniseal2 жыл бұрын
Yes, waiting 30 days before sealing freshly installed pavers will allow the natural efflorescence to evaporate from concrete products, avoiding the formation of whitish spots underneath the coating. This is a rule of thumb; the waiting period may vary depending on the climate and the type of product used. For specific information, please feel free to contact our technical support team.
@danbalkey25802 жыл бұрын
No not paver the Polymeric sand only paver are 6 yrs old only ?
@Techniseal2 жыл бұрын
@@danbalkey2580 Even in the case of a surface restoration, it is recommended to wait for at least 30 days to make sure the polymeric sand has fully cured. Sealing a freshly jointed installation too quickly might affect the polymeric additives and jeopardize joint stabilization. In all cases, waiting for at least a month before sealing pavers is recommended by both concrete product companies and maintenance product manufacturers. We hope this answers your question; if you wish, you can always reach out to our technical support team to discuss the situation further.
@hyperchord3 жыл бұрын
Great, clear instructions! Any recommendations on a brand of polymeric sand? Most ones I see have middle of the road reviews
@faradpack4 жыл бұрын
What a beautiful paver. Where do I buy like this?!
@creepyzeek13 жыл бұрын
At a paving store
@mikeduell94785 жыл бұрын
You totally don't need a leaf blower. Just sweep it well.
@WreckingCr3W24 жыл бұрын
Any other tips
@FLIPPER14392 жыл бұрын
Very good info👍
@Techniseal2 жыл бұрын
Glad it was helpful!
@LGFITNESS12 жыл бұрын
No rain for 24 hours? Yikes… I guess I’ll ask the contractor to point the blower towards the clouds as well so it doesn’t rain! 😂
@davebybee15194 жыл бұрын
I am resealing and sanding my cement pavers i have been reading that i should activate the sand with water then wait 30 days to seal the pavers with joint stabilizer to make the joints even stronger , the contractor says all i need to do is activate the sand with the sealer with joint stabilizer and just skip the water can you please give me your thoughts
@BeyondUfos9 жыл бұрын
ok I want to use Gator Sealer after this application. How long should I wait? I know you recommend 30 days to cure before a cleaner is used how about a sealer? Unless you recommend cleaning before you seal? Thanks...
@Techniseal6 жыл бұрын
If you want the best possible results, I'd go with Techniseal :)
@srtstl25992 жыл бұрын
So how long after wetting and what not can I place my grill on top?
@Techniseal2 жыл бұрын
We recommend waiting at least 48-72 hours before placing patio furniture and BBQ grills back on the surface. This will allow the sand to properly cure and gain sufficient resistance to sustain the weight of such objects. For complete information about our polymeric jointing sands, please feel free to visit our website or reach out to our technical support team.
@sssconstruction77774 жыл бұрын
Explain super
@Techniseal4 жыл бұрын
Thank you 🙂
@syedabdulhameed63832 жыл бұрын
amazing work
@Techniseal2 жыл бұрын
Thank you for the kind words 🙂
@carolbennett82462 жыл бұрын
How long do I need to wait before applying a sealant?
@Techniseal2 жыл бұрын
We recommend waiting at least 30 days after pavers have been jointed to consider sealing them. For more information, please consider visiting our website at 👉 bit.ly/3Gz4ln7
@rand49er Жыл бұрын
@@Techniseal thank you. That is the answer I needed.
@gmw196336 жыл бұрын
what a great well explained video :)
@Techniseal6 жыл бұрын
Thank You :)
@yesthatsmyrealname29 күн бұрын
Do you have this in Spanish?
@garyp19303 жыл бұрын
can it go below 30 degrees during the 30 day curing
@Techniseal3 жыл бұрын
At a minimal, temperature must be above 32°F for 48 hours following installation. For more information about our polymeric sands, you can always get their complete Technical Data Sheet online at bit.ly/30vw0AT
@dennispuleo86146 жыл бұрын
Just curious, how many bags did it take to do that job?
@creepyzeek13 жыл бұрын
About 20
@alexhobden70903 жыл бұрын
You should always try and hose those suds off of the pavers.
@lizsmith16586 жыл бұрын
Do you reccoment sealing the pavers after cleaning and adding Polymeric sand. I live in Florida and pavers always are covered with mold...
@Techniseal6 жыл бұрын
Technically, it is recommended to wait at least 30 days after adding polymeric sand before going through with surface sealing. For more tips about paver sealant application, read the following 👉🏼 bit.ly/2L4vzsg
@c.a.mcneil75992 жыл бұрын
Sealing pavers concrete
@MarcusAurelius3303611 жыл бұрын
very helpful video.
@mariocontreras22094 жыл бұрын
Information about this product and installation please.
@Techniseal4 жыл бұрын
Hi Mario, to learn more about our polymeric sands, please visit bit.ly/3e8b0Gn. You can also find all our TDS on the website.
@derekmab77344 жыл бұрын
I have not seen how the sealer should be applied
@Techniseal4 жыл бұрын
Hi Abdel, thank you for your interest, please take a look at the following video --> kzbin.info/www/bejne/rnTXZIKwhbGnmsU
@maryhelenedyjak56272 жыл бұрын
@@Techniseal when is it safe to seal? Do you need to wait the 30 day curing period before sealing?
@Techniseal2 жыл бұрын
@@maryhelenedyjak5627 Most paver manufacturers recommend waiting at least 30 days before sealing an installation. There are divergent opinions about this but we'd still recommend waiting to stay on the safe side.
@unclezeb71509 жыл бұрын
WHY DO I WASH ONTO STONE NO MATTER HOW CLEAN IT IS. I have sand tracked all trough my house now that the sidewalk is finished. Help!
@ironllama3 жыл бұрын
How do you remove hazing?
@Techniseal2 жыл бұрын
Thank you for your question. To quickly rid outdoor areas of "paver haze," we strongly recommend using our Paver Restorer cleaner. You can learn more about this product by visiting our website at 👉 bit.ly/3IOvVxQ. On a side note, you might be interested in knowing that our HP NextGel and SmartSand polymeric sands benefit from the NextGel technology, a manufacturing process that makes them practically "haze-free."
@cv48754 жыл бұрын
Let my man take his call lol. Nice video though.
@Techniseal4 жыл бұрын
We kept the cameras rolling so he would hang up faster ;)