Clean And Compact - DeepCool Macube 110

[@SpunkyGo0se]

Almost exactly the build I had planned on making! White really does look amazing!

[@JayVP]

Honestly this is perfect! Front of the case doesnt seem to have too much airflow, but if no plans to overclock, this is more than enough.

[@akimaralte]

I also have macube 110, well with much inferior specs. Good to see my favourite cabinet with such beautiful premium components

[@g4bryx]

The airflow in this case Is good?

[@akimaralte]

@@g4bryx Outflow is good, from the back and top. Inflow is okay, from the sides of the front panel. However, it comes with only one fan and you have to install the rest. It's good enough for me as i haven't use high end components

[@mrsxber1916]

@@g4bryxIf you really need good airflow don't go for this case. Especially with high end components, thermals can get very high. If you do wish to use this for a slightly more budget build. Make use of the 3 fan slot in the front or even better use 2 X 140mm fans in front cuz when you use 3 x 120 the one at the bottom doesn't do too much for the components inside as much as the top 2 do.

[@user-jn9dl9px6r]

I use it for my z690 & i5 12400, rtx 3070, hsf deepcool ak 620, 4 arctic f14 for case fan Imo, the case has Bad air flow design. Running cinebench, prime, aida (no oc, fan 100%) Cpu/gpu temp went around 78c /175f and creeping up Opening the front panel only reduce the cpu & gpu temperature by 4 degrees. Opening side panels and dust filter, the temperature drop another 5/6 degrees. Case looks good and build quality is reasonable. Albeit the case i/o back cover is a pain to use.

[@Cubix_-]

Clean and compact video. Love from France, very useful video!

[@SIDEKA_SLEBEW]

Oooo mbape mbape mbape

[@scares3859]

Thank you for posting this video, I was worrying that it wont fit 3fan GPUs, but it does.

[@Brand250]

Okay so this is the last video i am watching to buy a cabinet 😍😍 this is extremely awesome white build🔥🔥 i am going with almost same configuration expect ram and gpu.

[@Deathscythe91]

nobody can find a rtx 3000 in stock but this dude has a freakin diamond 3070 xD 07:30

[@Shubhajit99]

that GPU is screaming to be mounted vertically, lol.

[@joaovitor8485]

@@Shubhajit99 thats exactly what ive thought

[@STSYT]

Nice and clean looking case/build. The front airflow just looks like it’s a bit restricted

[@BhuvanRaj_]

Well.. actually not restricted.. there are two vents on both sides of the front panel. I think it would be short enough to maintain a good airflow

[@deardoue69]

not if you have at least 4 120mm fans

[@stuffstorm8751]

This is really amazing build bro!!!

[@stanislavkindiakov6334]

It feels the build lacks some RGB. Maybe, you could add more of it?

[@supetroop172]

yeah man seems way too subtle for my liking

[@srivenkateswaraswamy3403]

There's plenty

[@mrsxber1916]

@@srivenkateswaraswamy3403 joke flew right over your head

[@neeto279]

Beautiful PC.

[@viraj9494]

that gup is made for vertical mount

[@oNeHanDGuN]

would be great if you put the gpu vertical..

[@siomaiethan]

what if I don't put any fans or rad on top, does it look weird that it has so much space on top.

[@flyhard3461]

ye thats anoying

[@kryp4ek]

tell me whether the asus gtx 1660 and the processor intel i5 10400f will heat up in this case

[@CitizenXFR]

Looks like a cheaper copy of the NZXT H400. Only few things put me off: the thing at the top of the glass panel (is it removable), the shroud is not perforated (airflow?), nothing to hide cables passage from the inside to the back panel such as with the H400, and no dust filters?! Nice build however

[@tigerbalm666]

Can you build a iMac wit dis?

[@amalsankar8522]

Seriously tell me hows the airflow and temps

[@dricebaker6594]

Average

[@jackraptor695]

Temps like a freezer

[@marcelohenrique8236]

does a 360mm water cooler fit on that front of it there??

[@tigerbalm666]

Correctrion - This is the 310P

[@flatikk]

Something I find to be really strange about this case is that the externals are white, yet the internals are black. For the blue and pink editions, thought, the internal colors match the externals. This is something really strange, as there is little point in having only the externals of a case white when you mostly look at the internals. Got a motherboard, PSU cables, GPU, Case Fans, that are white, which will hopefully make it look better.

[@user-jn9dl9px6r]

If u want white, You should buy darkflash dlm22 white, better air flow, Same extra thin metal panel

[@vqsilly]

How are you temps after a couple hours of gaming and high usage? That front panel worries me a little

[@guipitabrawstar]

Very good

[@gotivanmomak]

does this case good airflow?

[@GarethPaxton]

Can you confirm that the front panel is metal?

[@ailluinthethyra6139]

It has the same material as other panels, steel with plastic clips/attachment.

[@yongkangfunnyzvideo]

Can you do pushpull config for a top mounted 240mm rad?

[@joaopaulofrazao8126]

Same doubt here... But I think it's supported because the Motherboard profile is very low. It won't hit the memories

[@DarthAndre24]

Hi, will the temps be adequate for air cooling the 3600 using the GAMMAXX at 29C room temp?

[@scares3859]

Um the front panel is closed, so less airflow. It would be better to install a water aio cooler.

[@DarthAndre24]

@@scares3859 thanks... wanted this case so badly but sadly the lack of airflow won't cut it.

[@annamuza6172]

@@DarthAndre24 go for Deepcool Matrexx 40, it has mesh front panel and very good airflow

[@DarthAndre24]

@@annamuza6172 thanks but I already have a Cooler Master MB311L mesh. great temps even with the summer heat.

[@anthonylima5202]

hi , what's the music from minute 8:00 ?

[@marcpicard3099]

Outside - Sofia Vargas

[@SupItsPie]

Can someone tell me how to remove the hdd shroud?

[@suryashekhardas6299]

Are Deepcool Magnets On Glass Reliable?

[@leonardoaques3015]

Very reliable. I have this exact model and the magnets are strong and safe.

[@madscientist1919]

@@leonardoaques3015 should the power supply be deepcool also or can it be rog?

[@bl4ckronin]

Is it possible to vertically mount the gpu in this case?

[@phhoang2610]

yes u can

[@b2daoink]

did you use the gpu holder of the case?

[@drizzyvin2015]

dust it have dust filter for psu at the bottom?

[@huzaifaahmad2289]

yes

[@joaofelix1860]

Conseguiria me informa qual foi preço total dele assim ? Muito lindo queria monta um igual

[@Thur977]

O gabinete está em torno de 380/450 reais as Fans CF 120us 230, de resto é bem relativo.

[@IM_ZEDKA]

My rtx 3090 measures 329 mm in length would it fit in this case?

[@SuperJackman117]

iTS NOT PAPER?

[@SuperJackman117]

But also judging by how big the 3070 is in this case I'm going to say it probably won't as the 3090 from images is a bit bigger than the 3070

[@Ayush-f9s]

Case is 400mm even after excluding 50mm You can fit it easily

[@toughgamer2960]

I have this case and I really love it! I also put a video kzbin.info/www/bejne/g2aqcmuwnc2jY7M and it's fairly easy to add RGB strip to the case, it's got enough space inside but from the outside it looks so compact. Really love the massive TG panel.

[@rembrandtpeertze7101]

Does a atx motherboard fit in it?

[@musicstuffidk856]

unfortunately not as this is a micro atx case

[@flashback3314]

my PC i9 rtx 3080

[@SpunkyGo0se]

That GPU is a little sus looking IMO

[@scares3859]

No, it's not fake.

[@SpunkyGo0se]

@@scares3859 I'm saying it's ugly lol

[@scares3859]

@@SpunkyGo0se 😅oh

[@marcoferrari4285]

gpu be like: please got enough rgb, I need air

[@dionjakobs5097]

hello, does a ATX mobo fit in this case?

[@BhuvanRaj_]

Nope... you gotta buy a mini atx mobo

[@alanguilas1]

Get the macube 310 for atx

[@flyairch]

you should have taken off the sticker top of nvme

[@odahvi1216]

where the fuck do I buy a macube 110 i literally can't find it

[@MrBujiu]

У меня такой же корпус и видеокарта, меняю корпус, потому что не продувается, карта греется на 5-10..пока сижу со снятой передней крышкой, жду фрактал фокус2

[@alexandrosmoisoglou2187]

I saw your giveaway i hope i win

[@wolf-------]

I am the first 🥇😂

[@lael6170]

that RAM packaging looks childish af