FLOLAB ONETIME PRO Anti-Glare Anti-Reflective iPhone 14 Pro Screen Protector: Install and Review!

Use your iPhone 14 Pro outside a lot, and hate all that glare? FLOLAB's ONETIME PRO Anti Glare tempered glass screen protector not only has an anti glare coating, it also has an anti reflective coating. The result: significantly improved sunlight visibility. Plus, it comes with a great installer, it has an anti microbial coating, and it's covered by FLOLAB's limited lifetime warranty. If it breaks, you can get a replacement, although you will need to pay an $8.95 shipping and handling fee.
00:00 Introduction
00:46 What’s in the box?
01:21 Pre-installation prep
01:31 Cleaning your iPhone 14 Pro
01:53 Putting on the installer
02:21 Detach the plastic sheet from the tabs at the top
02:37 Pull out the plastic sheet from the bottom of the installer
03:09 Slide your finger down the length of the installer
03:31 Remove the installer
03:41 Take off the plastic top sheet
03:57 Results
05:25 Look and feel
06:37 Does the Anti-reflective coating make a difference?
07:21 Case compatibility
07:38 CASETiFY Impact
08:15 Apple Silicone
08:31 RHINOSHIELD SOLIDSUIT
08:57 Mous Limitless 5.0
09:26 OtterBox Symmetry Series
10:37 Conclusion
11:47 Pricing, discounts, and where to buy
Case compatibility isn't quite as good as that of FLOLAB's less expensive ONETIME screen protector, because the ONETIME PRO is a bit more edge to edge, but overall, it is quite good. In my testing, it worked fine with the CASETiFY Impact, Mous Limitless 5.0, Apple Silicone, and RhinoShield SolidSuit, but the OtterBox Symmetry caused it to bubble up in the top right hand corner. Only when you pressed it there, however.
Overall, it's quite an excellent screen protector. I do prefer the installer of the FLOLAB ONETIME, because it is a bit simpler to use, but the installer is still excellent and the results are superb. Because it has a matte anti-glare coating, there is a tiny reduction in optical clarity, but it is exceedingly slight.
The ONETIME PRO Anti Glare for iPhone 14 Pro is available directly from FLOLAB and is currently priced at $39.95 (regular price is $59.95). There is also a Privacy and a Blue Light Blocking version available. The cheaper ONETIME screen protector series is currently on sale for $19.95 for the Anti-Glare, Privacy and Blue Light Blocking variants, so that's an option to consider as well. And you can save 10% on your FLOLAB purchase by using my affiliate code TR10, so don't forget to use that if you are interested in making a FLOLAB purchase. Many thanks to FLOLAB for sending me out these samples to review!
**Save 10% with affiliate discount code: TR10
flolab.io/collections/iphone-...
Thanks for watching, and have a wonderful day!
#iphone14pro

[@l0vem3n0t]

Your reviews are underrated but always one of the more comprehensive one. Thank you!

[@TheTechReviewer]

Thank you, Ken! So happy you are finding them to be helpful!!

[@panther1135]

Love your reviews!

[@TheTechReviewer]

Thank you!! So happy to hear that you find them to be helpful . ❤️

[@marg8315]

Thanks for the video and instructions. Just got one for my new iPhone 15 and the installation process is buttery smooth and it looks so great! I’ve tried Mous and Rhinoshield screen protected and neither can compare in terms of the installation process and the actual quality!

[@TheTechReviewer]

Hi Marg! So happy to hear it! FLOLAB has a great installation system. I just installed the ONETIME PRO anti glare version on my 15 Pro and it is fantastic. Just as great as the 14 Pro version!! Review video is coming soon 😊

[@ChaseWalling]

Watching this with my 15 Pro Max matte flolab protector. Absolutely LOVE it!

[@TheTechReviewer]

Awesome!! Thanks for sharing!! Is it the ONETIME MAX or the ONETIME PRO version?

[@TheTechReviewer]

I just installed the ONETIME PRO anti glare screen protector on my 15 Pro and it is awesome. Absolutely perfect!!

[@aripalefski2676]

Very cool video

[@TheTechReviewer]

Thanks so much, Ari! Really appreciate the support!

[@SS07019]

Good review as always. I am so excited and will be looking forward to your reviews for the 15 pro max cases and screen protectors. 😊 I haven't watched much of your videos lately because I have the 13 Pro Max and I am waiting on the 15. 😂😊 thanks!

[@TheTechReviewer]

Thanks! I'm very excited about the 15 Pro Max...can't wait for it to come out. Keeping my fingers crossed for those titanium sides!! I've got a lot of 15 Pro Max accessory reviews planned. 😊

[@SS07019]

@@TheTechReviewer Yes 🤞🤞on the titanium part. The steel phones are too heavy for me, and that was one of the reasons why I skipped the 14 pros.

[@TheTechReviewer]

@SS07019 yes, the aluminum framed non-pro iPhones have always been so much lighter. Fingers super extra crossed for titanium!!

[@marymadigan9707]

Great review and content as always nice one 🇨🇮😎

[@TheTechReviewer]

Thanks, Mary!! Appreciate the support, as always! ❤️

[@Sarahonwheels]

I love my screen protector(I got mine without the pro, just the more case friendly one) anti glare is life changing

[@TheTechReviewer]

So happy you are enjoying it, Sarah! FloLab did a really good job with these new ONETIME and ONETIME PRO screen protectors 😊

[@Sarahonwheels]

@@TheTechReviewer yes this is my first Flolab screen protector. Used to go with smartish tuff sheet and while they were pretty cheap, the coverage was terrible leaving the sides of the screen open for too large for my comfort! This is now my go to for screen protectors

[@TheTechReviewer]

@aurorascottage111 Great to hear! So happy you are loving your new FloLab screen protector!

[@Akenrec]

Was this for the 15 pro or pro max? I’ve been having some fitment issues with mine and I’m trying to figure out if it’s model dependent.

[@Sarahonwheels]

@@Akenrec no I have the 14 pro max but I heard that they have made revised versions because of the curved screen and if you contact them they will send you the updated version. They should’ve dropped on September 30th so contact them. They will fix it

[@markaznar1979]

Great review as always 😘

[@TheTechReviewer]

Thank you, Mark! 🤗 I really like this screen protector. I've never been a big fan of the matte finish of most anti-glare screen protectors, but this one is really well done. I'm loving having it on my phone.

[@markaznar1979]

@@TheTechReviewer Send me one, haha. Deliveries from Flolab to my present location in Manila, Philippines, tend to take a very long time because they don't provide expedited shipping options for my area.

[@TheTechReviewer]

Sorry to hear it, Mark! Surprising to hear that shipping takes such a long time, given the relatively short distance between China and the Philippines. You were back in the US for a while, right? And now back in Manila?

[@markaznar1979]

@@TheTechReviewer that’s right🥲. Takes ages to have ‘em delivered here🙃. Shellrus does express, but with all your awesome reviews on Flolab, I am keen to try their matte ones. I might need your help come iPhone 15 ULTRAAAAA 😅. I can always pay you via PayPal or wire money directly to you for one of ‘em

[@TheTechReviewer]

Do you think that they will go with the 15 Ultra name? I'm not hearing that so much now...there was a lot of 15 Ultra talk earlier in the summer, but I'm mostly hearing 15 Pro Max now...

[@Theokb24]

Can you review torras diamond screen protector?

[@TheTechReviewer]

Hi Oscar! Thanks for the suggestion...I'll look into it 😊

[@Zonksmobile]

I Recently Ordered The 15 Pro Max Privacy Onetime Max Screen Protector From FloLab! What's The Difference Between The Onetime Pro And The Onetime Max? 🤔🤔🤔

[@TheTechReviewer]

Good question!! I don’t have any samples of the new 15 Pro series FloLab yet, so I don’t know…

[@y00ts]

I hope you can test it on iPhone 15 pro max , I saw a post on Reddit the other day saying that because of the new rounded edges on the new iPhone the screen protector edges don’t stick down and can’t find a review online to see if does or not

[@marg8315]

I just got my $35 flo lab screen protector for my 15 pro max and I’m super happy with the result. I think I know what you mean tho - 2.5D vs 3D. I noticed there’s a small gap on the sides (so small that as soon as my finger nail goes over the protector it touches the metal frame) and it’s less pronounced at the bottom. I think the gap is there because this screen protector is supposed to be compatible with various cases on the market. So I would say this, overall, flolab is the best in my book because of how easy it is to install and the quality and clarity (my finger prints don’t stick as well. Really as close to using my iPhone without a protector as it can get), and I’ve gotten Mous hybrid glass and rhinoshield plastic one (impact something - still no 1 if you want max protection as plastic one absorb impact energy better than glass but it has its other down sides). If you want max compatibility and zero gap, I would a) look for 3D / edge to edge; and b) go with the same manufacturer for both the case and the screen protector cuz they would know how much room they have to leave in between using their own case (I know this because rhnoshield screen protector goes edge to edge and while it worked well with my rhinoshield case, it didn’t work with my Mous case as their case eats more into the screen I guess and I had to order Mous’s hybrid glass protector - which is nice but it’s not as clear, hard to apply and oleophobic coating is not as good).

[@TheTechReviewer]

Just installed the ONETIME PRO Anti Glare on my 15 Pro and it is a smashing success. Looks fantastic...no halos.

[@TheTechReviewer]

Thanks, Marg, for such an excellent answer. You really know your stuff!!

[@prestongray7747]

What Flolab screen protector would recommend for the iPhone 15 Pro Max? Do you recommend the Flolab screen protectors that have anti-blue?

[@TheTechReviewer]

Hi Preston! I haven’t gotten a chance to try out any of the FloLab screen protectors for the 15 Pro Max yet, but I was certainly impressed by their product lines for the 14 Pro series. I didn’t see any downside to the anti blue light versions…but of course I cannot really evaluate the health benefits of them, if any. They look good and perform well, however. And I do find the anti reflective coating of the Pro versions to be a nice addition. Hope this helps!!

[@prestongray7747]

@@TheTechReviewer So just the anti-glare for Flolab’s screen protector has slight optical clarity decrease compared to the anti-relative, correct?

[@TheTechReviewer]

@prestongray7747 Yes. But it is quite a small amount, and really only noticeable when you are looking at the phone from a very close difference

[@prestongray7747]

@@TheTechReviewer Thank you for your help.

[@TheTechReviewer]

@prestongray7747 😊

[@garyhoang9923]

Can you do a review on the FLOLAB ONETIME PRO non matt version but still has anti reflection/glare?

[@TheTechReviewer]

I’m afraid I’ve moved on to the iPhone 15 Pro and Pro Max versions of this screen protector, so I won’t be reviewing the exact model you are looking at. But I do have more FLOLAB screen protector reviews coming up, for sure!!

[@garyhoang9923]

​@@TheTechReviewerthanks for the reply! Yes. Was actually referring to their newest one for iPhone 15 series

[@TheTechReviewer]

The 3D version? I'll be reviewing that one soon...The non 3D version is currently on my 15 Pro and I love it (the anti glare version.). Great screen protector!

[@user-uk1vc9qx4h]

How did you manage to remove the dust in your environment? Whatever I do there will always be dust everywhere. It is so annoying.

[@TheTechReviewer]

Well, after you vacuum and dust, you should wait awhile to let any dust settle that you stirred up in your cleaning efforts. Then make sure to close any windows and turn off any any AC/heat or fans...you don't want air blowing around. That can help. Also, some people swear by doing a screen protector installation in the bathroom, after their shower, because the humidity reduces the dust in the air. I've never tried that, though. And keep in mind that the design of this screen protector installer minimizes the exposure of your phone to dust in the environment, so even if the area is dusty, you are less likely to have issues. Good luck!!!

[@selwr]

Does this screen protector have a matte finish?

[@TheTechReviewer]

Yes, it does. Not too pronounced, though. Really nice screen protector...I've been loving it on my phone!

[@markaznar1979]

Is it possible to remove the installation kit? I prefer installing it without the kit. Please let me know

[@TheTechReviewer]

Hi Mark! You might want to ask FLOLAB...I really don't know. So sorry!

[@UnofficialSno]

@2:06 AHHHHHH

[@TheTechReviewer]

😊