How to Make an Aquarium at Home - Complete Tutorial

[@onlinestudywala9844]

Best and easiest way to make a fish tank on KZbin.... Thank you.

[@ikhunbendot6081]

Sangat rapih....Joss lah

[@rhapsodykids1895]

Channel PIECE OF PAPER, the best channel in making aquariums

[@aquariomarinho]

Congrats my friend ! From Brazil

[@aquariomarinho]

great video! like following the channel

[@bakuloza6383]

Very useful video. Please tell me side glasses are to be put on base glass or beside base glass

[@yoyo_hughes_1179]

If there wasnt any of that blue stuff and he had put some plants in, it would have been a nice tank

[@Archerman61]

Nice build. I like the detail.

[@Sad_cup_of_tea_]

Do the sides sit on top of the base or are the sides put on the sides of the base?

[@Palanzane]

Top of base (after 4 years XD )

[@justinvinoy2188]

Helping video.. That blue edges weren’t mandatory..

[@stannyruzario242]

Size for the middle 2 glass is wrong.. if it’s 12” * 12” the other side glass will not fix.. it should be 12”-5mm * 12-10mm if it’s 5 mm glass

[@lifeissosimplendeasy3859]

Stanny Ruzario front and back glass using in outer area.. Overthinking sucks

[@leoandrex2783]

Thats wat.. Its really wrong..

[@arsyahrifai777]

Yes u right.. the hight will not compltly same on the other side

[@rajivtodankar6023]

@@lifeissosimplendeasy3859 chutiya he is right. Not using your brain sucks

[@ravisood2329]

the thickness of side glass / back and front glass has not be accounted for. which should be subtracted to keep the joints at exactly 90 degree angle

[@ਬੰਗੜਬਾਈ]

Bro u r awesome bot videos dekhi but u r awesome

[@joselorenzobazan2726]

Will silicone still bind after it skins over? I just replaced a glass panel on my aquarium and I had a hard time working the silicone out of the caulk. It may have dried a little before I placed the glass to bind

[@kalczarobert]

Try DowSil 881 for silicone, probbably the best one on the market for glass and aquarium builds.

[@MrSadiquekt]

Hi... I have seen some people are using outer area of base glass to stick side glasses same as like in this video. But some others are putting all side glasses on the top of base glass by reducing the 2 side glasses width by glass thickness.. Which practice is right or which practice is good ? And why ? Can any one answer on this ? Thank you...

[@nikhilkadakol7917]

for larger aquarium outer area of base is good

[@ZahidHussain-wk1zl]

Great work... Which adhesive you are using

[@mohitupadhyay8227]

Tum bahut acha kaam krta hai maqsood bhai

[@thoufeequeahmed2256]

I like u r job good videos

[@SAM_DL]

Wrong process for making an aquarium.... Aquarium's all 4 side glass should stand on bottom glass..

[@TheWidowMaker.]

Exactly! I noticed that straight away. Dude shouldn't be misleading others like this... Bad things will happen

[@jamesmccluskey9200]

No reason why they should. What is totall y wrong is the method of applying solicone

[@haris-cf6hx]

*If silicone is strong that's not a matter*

[@bruceawi1148]

That's what I thought..

[@harshalkolambe7147]

Method is correct. Silicon should be strong. Even ADA tanks come with all top glass connected from side of bottom glass.

[@jhonnyblade702]

Don’t you need to clamp it as silicon cures? Awesome!

[@filoumilou8053]

Lovely jobly 🤙🏿🤙🏿🤙🏿👊🏿👊🏿👊🏿

[@apiombom1990]

Teknik perakitan alas nya benar. Jadi sisi sisi tidak menginjak alas. Sehingga alas aman dari beban. Kebanyakan kita ini menjadikan alas sebagai tumpuan untuk sisi seluruh sisi. Sehingga saat tank diletakkan pada lantai yang tidak rata, maka lantai mudah sekali pecah.

[@poovinrajk.m6207]

Ur aquarium excellent work great job

[@arexgaming9258]

Beautiful aquarium and beautiful fishes

[@bloodtest2201]

Aquarium bana raheho aur music bomb banane jaisa diya hai 😁😁😁

[@omsingharjit]

Can i use this type of silicone for making plastic molder ?

[@32drahcir]

Which silicon are you using? Thanks.

[@MasksMaker]

How many glue bottles you used?

[@anasmuhammed9622]

Super.thank you

[@RoscoeMFaisonJr]

A detailed materials list on your projects would be helpful for the less knowledgeable.

[@RandB_Aquatics]

True, i am wondering though how he manages to have the 1st side up with fresh silicone, like how do i keep it up

[@shijuezhimala560]

Super.. 👍👍👍

[@100FactChecks]

A gentle reminder to anyone thinking of starting fish keeping: you must cycle your aquarium first! Also, goldfish need much bigger tanks than that. Nice job building it, but it should have a filter.

[@JadeWinters02]

I don't think beginners start off by building their own tanks. Most start of with pre built kits. If they still enjoy their hobby after a while then they may look into stuff like this

[@aboobaida100]

Goooood💯💯💯💯💯

[@top5ph747]

13:25 can anyone tell me what is the name of that color blue thing? Thanksssss

[@SAMUEL-wk2mb]

Braces I think so

[@youssefslm3542]

I want to know do i get the edges sanded or do i leave the rough cut for joing with silicone

[@delconparrer9894]

kzbin.info/www/bejne/gomYfmZpp6apgac

[@arielito835]

What Brand of silicone did you use?

[@RandB_Aquatics]

how do you keep the 1st side up with non dried silicone?

[@CarlosAlberto-ii1li]

Magic and mirrors, do not copy this work, it is not safe.

[@simranpreetsingh300]

Thank you so much it was really helpful 😊

[@bakkurudheen9912]

Bro what paste are u using to stick and fit the glass stronger ?? Please reply me bro

[@sarafrazcollege9979]

haddin bakks This is silicon tube(clear) U can easily get it from market.

[@roysshrimptanks1676]

Fevistick

[@UrbandancecentreFlickingFeetZ]

What is the name of bule thing which used in aquarium corners and how to get it plz rply

[@fercivalsanchez5930]

Any answer plz

[@kadalora]

What's that thing you have on your index finger? Is it made of rubber? Looks like the silicone doesn't stick to it? Would be great if you could advise where to get them. Also I assume you don't need to clamp the aquarium? The silicone will bond strongly with the glass once it cures? Cheers!

[@kadalora]

Can you answer my questions?

[@BrettsForest]

I put your video on. Started working on an unrelated project. And then 5 minutes later of jamming out to your amazing music choice. I had completely forgotten about the work you were doing. I was astonished. Also thanks for the diy video

[@ALIPALUCHANNEL]

Thank you so much

[@sunchaserw1477]

a very neat and tidy method

[@dilipjaisingh4485]

really nice great work thumbs up

[@ravindrannarayanan5298]

Very nice thank you

[@markthomas4992]

Great video , but realistically basic tanks are VERY cheap to buy anyway .

[@untungsurapati559]

From Indonesia : Thanks Brother

[@arivarasana3743]

Very fine let me where to get the closure of fish tank & what is the name of glass glue & n blue plastic for corners?

[@MariaJose-gy8zr]

Melhor vídeo ❤

[@AlvinaGallery]

Thanks for sharing

[@ankushkaul6909]

Did you use wackeres 121 silicon. Is this silicon good for big aquarium aa compared to dow sil 100℅ silicon

[@funentertainment6141]

I hope that fish will be okay by now ! that was fish assalut!

[@dibyendumondal7586]

What is the width and height of an aquarium of 4 feet long? I would be very benefited if you help sir!

[@griffongonsalves9141]

Keep it 2.5 ft or 3 ft width and height of 2 ft

[@as.ashike4131]

Very nice

[@brokenheart9997]

رائع احسنت صنعا يا صديقي 👏👏

[@souvikart9988]

The sound is like a horror movie 😂😂

[@rashmikumari2250]

Please can you tell me which glue is used to paste it

[@pbsamanthamarie]

What's the blue support thing at 13:20?

[@athos91]

Por qué complican todo con pulgadas??? No sería más fácil hacerlo como la gente normal en cm?

[@thilakpoojary5781]

Sir, plz tell the name of cilicon gum to use better finishing and best result🙏,

[@khanhtaymon5496]

Very standard and useful for everyone.

[@miquelmontgomery2542]

It’s a good tank but I don’t recommend keeping those fish in there, I’d also put some water conditioner in the water otherwise you’re burning their gills which will cause them to die in 24 hours or less. Also, it doesn’t say how many gallons this tank can hold. Can you please tell me?

[@sarojkumarmaharathi1757]

Sir yeh corner gurde kaha milega

[@nagaarjun9747]

Please mention the name of the materials..

[@pritamdey737]

Superb ..

[@mohammedpothangodan7566]

Thank you very muchsir very very good job and I am asking you could you give me more Ideas about How to making Aquarium

[@soundarya4314]

Where you bought the glasses??

[@akkiiiofficial2709]

Sir ji apne konsa white glue lagaya hai glass ko

[@ishanasharma5511]

nice vedio completely satisfied with u good job

[@skahasan]

How silicon fix those glass so fast and how you make hole aquarium single handedly without any help

[@joyjosephiyana6220]

Boss ano brand name ng silicon gamit mo?

[@hassanahmed8705]

well done keep it up

[@trexxg1436]

I watched the whole thing and learned, but the music became so annoying I had to mute it.

[@muthuganeshmuthuganesh956]

Trexx G

[@steile666]

How about the 10 minutes of adhesive tape stunts?? LOL

[@zainfoodtv2631]

Haha🤢🤣

[@kenhankins7119]

Is that a cundom on your finger

[@rajivtodankar6023]

Yes you want I supply them

[@mithubhattacharjee4885]

Superb. Glue link plz.

[@robinsingh30]

mithu bhattacharjee dow corning 100% silicone red bottle

[@steile666]

It is Silicone Glue. You'll find one easily at a hardware store.

[@ardacamur422]

Normal silicone is toxic for fishes, you should use "aquarium silicone" which is non-toxic for water creatures.

[@rinchensherpa8937]

So. Nice

[@mohdk7189]

Good work👍

[@blodwin7548]

Can u say the gum's name u using

[@StuartAylward]

The actually tank build isn't all that bad.... until you put that nasty cheap "decoration" down the corners and that god awful lid!! The foam bottom i can understand the requirement, but it could have been cut a lot neater, or used a better material...

[@beingjoggi972]

Plastik ki. एग्सल kon c shop m milti hhe

[@marinarasyid5653]

Thank's..it's so helpfull

[@skgamar6211]

Pl sir suggest me I do 1.5(45cm)fish tank .size of glass & which mm glass use.pl.reply

[@affandanish1943]

glu ka kya nam h

[@owaisansari110]

Silicon

[@reeel5543]

Can we apply thick or thin silicon lyer

[@TechRiders]

Yes

[@amangoswami4087]

Nice

[@PRIMEAquarismo]

Like 👍👍👍👍👍👍👍👍

[@aliclucifera8353]

What's the name of that edge frame?

[@sajith_4408]

If any leakage occur after the process what we want to do??

[@abhijithsunil7285]

Which is the best

[@rimofheaven]

Excellent video. It had my attention from beginning to end. Thank you for sharing it.

[@dogsvlog7173]

C. C. C. C. C

[@dogsvlog7173]

C. C. C.

[@royalrajput3775]

Which glue you used please tell me

[@funfact949]

Any alternative of silicon that can be to make fish tank because I am not able to find silicon nearby me , thank you

[@justinleong2589]

You did not show the most important part: types of glue you are using.

[@Moments.Of.Gamings]

Bro ise dry kab tak karna hai

[@vijaythakare1882]

Nice one

[@reewardsingh710]

nice

[@VulgusVulgus]

Bro! Excelente el armado del acuario, aunque un poco desprolijo con la silicona y por otra parte ... en el manejo del cutter eres un peligro!

[@gautamkumar-qo4ml]

Maine 2/3 aquarium self me banaya hai but neeche me 5 6 point par leak कर raha hai I see Kaise thik kare

[@santusaikia8474]

sir,which is the best budget friendly glass to make aquarium

[@sureshsurya3857]

Super

[@sushilchaudhary5858]

Which glue used in it?