How to make Universal Remote control using ESP8266 Google Assistant & Cadio

[@andremartazard3274]

I want to ask Mr. Why did I follow the tutorial and install the firmware correctly then at 6:36 esp 8266 the led went out and the wifi didn't turn on

[@atakanatay8376]

What sensors does cadio support?

[@ismathmohamed663]

You are inspiring young mind ,keep rocking bro

[@kamalkamel7559]

a wonderful tutorial, I have a question? a what we can add ds18b20 to CADIO? it does not exist in the components of the application

[@TuncerACICI]

I made the same application for the remote control of my LG brand television, but it does not work. I control the infrared with my phone's camera. There is a blinking, but it is a little weak. Do you have any thoughts about the problem? Thanks

[@roopsvinay]

Super brother, you are a real innovator. Keep it up.

[@anjuagrawal4960]

Please suggest the rating of relay to be used to control air conditioner

[@abdelalibougossa9308]

Thank you for your efforts and all that you provide. We frankly enjoy and benefit from your content. I hope that you will put a video for us about designing and programming a smart farm and full control over it.

[@TechStudyCell]

ok

[@NayaAccount-mn7qo]

​@@TechStudyCellcan we use two pin receiver like transmitter

[@aniketpol1502]

Great project... But is it possible to make this project in esp rainmaker? I want to add this to my existing esp32 home automation circuit

[@smartteg7381]

Hi please how can I connect multiple ir sensors to the esp8266 board like iR blaster

[@Tinkoplayz]

Just connect data wires to d1 or 2 or 3 and gnd to gnd and 3v with 3v

[@mayurnt1]

Sir, plz reply as soon as possible, flashing the esp8266 or esp32 with new firmware or bootloader will allow the board to loan other project ?????????

[@TechStudyCell]

yes

[@infinity__editx]

I connect ir led on GPIO 1 but after connecting the ir led my controller not booting what I do ?

[@naveenattada6262]

Can i use two devices in one cadio app

[@naveenattada6262]

How can i use two different rooms and two module in one app

[@ANANDHU15999]

When I try to add Cadio in Google assistant, it returns with the following error while entering login credentials: "Could not reach Cadio. Please try again". What's the solution to this issue?

[@smartprogramming9576]

It is not control what can i do and when a direction the remote ir sensor auto show the button assign but i don't press any button. what can i do

[@rakeshhp5389]

Hi, i tried doing the home automation using esp32.. it works fine for several IR enabled devices. But i have a orient electric fan with IR remote for which its not working. Do u have any idea on this strange issue.

[@medamirkhemissi]

thank you dear, please for making 360 ° emitter, the ir emetter wired between them, or i must link each emitter to one gpio ?

[@TechStudyCell]

You can use a transistor to connect multiple LED. transistor base will be connect to GPIO

[@samueltheophilus1779]

Please can I get the circuit diagram?

[@Tinkoplayz]

Bro fan remote cannot configring tv temote configure but cannot work on tv

[@abc2001]

Can I use ESP32 instead of ESP8266?

[@diaryiklanlucudiarylancu8367]

Sir how to make Ir remote control to relay 8 channel used app cadio?

[@marios2620]

Thank you ! 👋👋👏👏👏

[@TechStudyCell]

Welcome

[@francocastilloAR]

Is it possible to send IR commands from the Button Manager app? With something added to the decoder with Android TV like an Arduino or something similar? My need is to change the volume buttons of Android TV so that with an Arduino or something similar it emits the IR commands of a sound system. Ideally it can also be turned on or off with the same control.

[@subhammondal8160]

bro I follow every step you had mentioned but it is not working as app config and ir sending the command to device but it still not working with my ac please help me..

[@vanshikatresajoshua524a2]

How to reconfiguration for esp 8266 module..

[@TechStudyCell]

just press the config button for 4 sec... pls watch the last video on cadio & esp8266

[@MindsetA.I]

i can also do this on a TV right?

[@TechStudyCell]

Yes

[@m.shayanshamim6351]

Can we control Ac Temperature with google Assistant in this project ?

[@TechStudyCell]

No

[@sameerali7763]

Please help me with this .... When I'm trying to erase it says CHIP EFUSE CHECK ERROR please really need help

[@adityahalmare501]

Bro my com port is not showing

[@1990tranhuy]

Not Assigned ? Pro

[@mohamedkhalid3144]

Can this be done using esp32

[@TechStudyCell]

yes.

[@D.HASAN-]

Can you give me your great collection automation app's link? Than l will helpful to you.

[@smartteg7381]

Nice 👍 project please how did you configured the Ac temperature control

[@TechStudyCell]

You can assign temp up and temp down button

[@lucasfernandez3750]

Hello, thank you very much for sharing your project! It works wonderfully, I only had one problem, I cannot make the control for an air conditioner work, I have read that it is the codes with which the control signal is encrypted, is this true? Is there a way to solve it? Thank you!!

[@AllynVibes]

Great video! When I try to erase I get ............ that's it, for a long time.

[@tommysevario4012]

Good job. Do you offer training classes ? I have never been in contact with Arduino and i wish to really learn every thing you know please starting from beginner to your level

[@TechStudyCell]

Thanks... Not yet...

[@nicoladellino8124]

Very useful video, THX.

[@drelectronics13]

Bro I mailed you a issue regarding coding part can you please check and reply to it it's based on your all in one home automation with fan dimmer

[@firdoshdiakus4841]

what is your issue ? I have made the same project and works 100%

[@drelectronics13]

@@firdoshdiakus4841 not the Cadio one i mailed regarding rainmaker

[@firdoshdiakus4841]

@@drelectronics13 Am not the author of these projects but can help as this guy very seldom replies to questions. I have made the rainmaker project and works like a dream

[@drelectronics13]

@@firdoshdiakus4841 thanks for reply but the code really had some big issues which will take long text to reply ,but still Cadio has added fan dimmer so waiting for techiesms to me video on it

[@satyajitmandal6859]

Can it be controlled with Amazon Alexa?

[@TechStudyCell]

yes

[@hasstv9393]

Is it possible to add Cadio to { ESP32 Alexa Home Automation using Amazon Echo + Bluetooth + IR Remote with Fan Dimmer circuit } ?? from this your video - circuit ???? Please answer

[@TechStudyCell]

No. In that case you have to use 2 microcontrollers and connect them through serial communication.

[@hasstv9393]

@@TechStudyCell Can you please show how we can do this ??

[@ฉัตรคลาสสิคคาร์]

WOW !!! big thank .

[@TechStudyCell]

Welcome

[@anilkumarmaurya5388]

Sir please make the same project with RF remote

[@supriyasardar]

How to make using esp32 please tell me😢

[@TechStudyCell]

Use ESP32 firmware

[@paulvincentlinda8083]

​@@TechStudyCellhi do u have diagram for esp32?

[@Tinkoplayz]

Tv p work nehi krta y

[@gamingwithsolo4542]

Button 1 handler problem a ra ha

[@ankushkumar6809]

First like and comment from me 😅

[@TechStudyCell]

Thanks

[@ankushkumar6809]

@@TechStudyCell I liked many videos of urs and successfully made some projects

[@harshverma_i]

Awesome video 🔥🔥 sir how i can personally contact with you ? I am a ece student... Want some guidance from you...

[@TechStudyCell]

You can ask your queries here. thanks

[@vikashchoudhary2593]

Ir Signal is very Weak, have to get close to device to get detected by devices, How to Improve ir Signal ?

[@Jazz-nm1kf]

Ensure your ir led is getting the voltage it needs. It also might be too directional and could use a diffuser, or the opposite, if it's too "floody", you could use a flashlight reflector to improve range.

[@kingthousu]

Simple and powerful. tried and integrated with my home theatre. But Alexa supports only on/off solutions but found an alternate method to control volume and other remote settings by using Alexa routines 😶

[@TechStudyCell]

Did it work?

[@maniikanta24]

How to get a permanent version of cadio application. As u said in the previous video it is free for 500 hours

[@TechStudyCell]

You have to purchase the license

[@avipatel7986]

Make home automation project with 2 esp8266 module for 2 rooms with cadio

[@TechStudyCell]

Okay

[@JohnDoew-hz8qt]

Awesome video 🔥🔥, and thank you for the presentation, BUT could you please replace your real voice with some AI google speech synthesis engine ? Your thick hindi accent It drives me crazy , and I barrely understand the content .

[@piaggio500dani5]

Bon travail, merci pour la vidéo

[@TechStudyCell]

Thanks

[@tamimdotalone1875]

Hi Bro make a 4chanel home automation with Bluetooth, wifi, google home,rainmaker and manual switch

[@tamimdotalone1875]

Please 🙏🙏

[@tamimdotalone1875]

And send the coding in your website

[@tamimdotalone1875]

As soon as possible

[@tamimdotalone1875]

And circuit diagram

[@tamimdotalone1875]

Make this project esp32

[@Tinkoplayz]

Rgb working

[@ASHOKKUMAR-hc8ye]

Excilent work it is good to learn from your channel. I got something in my mind and would like to discuss with you if you can please help me to talk with you about the same IR Remote please send me your contact details to talk will pay for your time too. Thanks