Simple Clap Switch circuit for Home-automation

[@a.magdy.moussa]

It is working, the only clapping circuit in many KZbin videos that is working. Thanks from Egypt

[@ajjarapusowjanya5944]

Tq so much bro.. I tried so many circuits no circuit works properly. This works in my 1st attempt..

[@electronic7979]

Nice electronic circuit.

[@TechStudyCell]

Thanks

[@vamsidevarakonda9302]

@@TechStudyCell bro what is Wattage of resistors 1/4 or 1 w.

[@adendaliehmohamed8269]

Tanks you are legend teacher

[@Hiruka01]

Good idea bro

[@panczlajn5807]

Works at first try!!! Thanks Man 😁

[@TechStudyCell]

Enjoy

[@yashnimse444]

Hello...Can you help me out...I have done all the connections properly but it isn't working

[@cibilsunny]

​@@yashnimse444 yes, me have the same issue,!!!!

[@kayalvizhi2115]

Same

[@ngoziokey874]

Same

[@husnukar1400]

Emeğine sağlık, süper çalışıyor.

[@Aaron-nq9rh]

Спасибо за информацию. Я буду использовать это для своего университетского проекта🙏

[@ArtisanPallet]

Nice project... Thanks for sharing 👍👍👍

[@TechStudyCell]

You are welcome..

[@nikhil.coolhunk9630]

Bro I need this desperately

[@kongollauhasree4931]

What should be the solution

[@rekhachoudhary2743]

We even😂😂

[@bainomugashodebrah]

This is very nice but do you mind explaining what you are doing always!!! ???

[@SwapnaThoudoju]

We want circuit diagram sir, so that we can do easily

[@GamingDimpal430k]

100nf capacitor voltage?

[@GamingDimpal430k]

🙄🙄

[@ElsaTeena]

Will you please tell me which type of buzzer you used in making the video???

[@sejalkanojiya1404]

Thank you so much sir ....!

[@TechStudyCell]

You are welcome

[@rpcircuits5937]

Superb 👍👍👍

[@arijitghosh9178]

I try it. It's working perfectly 🙂

[@TechStudyCell]

Great

[@jacksonjeff7207]

Did u use 5v adapter?

[@jthreew8756]

Bro I follow all instructions u tell in this video but its not working what should be the problem. What should i do now.

[@markwasylciw6526]

your amazing thank you

[@TechStudyCell]

Welcome

[@RajPatel-be6vm]

Is project ke liye koi bhi computer program related work nahi karna he na Please reply 🙏

[@gautambandyopadhyay5524]

Thank you Sir.

[@TechStudyCell]

You are welcome

[@nikhil.coolhunk9630]

I'm doing this project and I'm ready to buy this desperately

[@vamsidevarakonda9302]

Bro from where I Can it

[@nikhil.coolhunk9630]

@@vamsidevarakonda9302 i brought in amazon bro

[@sravan.t7581]

@@nikhil.coolhunk9630so u bought whole kit?? and is it worked fine?

[@dudamsnehitha2292]

can you list out the components clearly?

[@KavithaAravindan]

If we use 10 volt led it will work

[@MuhammadAqibShabbir]

Can we use 9 volt battery instead of 5 volt

[@adendaliehmohamed8269]

I am realise this project me and m'y friand

[@mehejabinkabir830]

Can you please share the circuit diagram?

[@jahidhasanredoy3305]

It Doesn't work🙂

[@l30nalceda38]

Skill issue 😂😂😂😂😂

[@alexanderpuentes.285]

Does anyone know where to get the light bulb like that

[@arbabsiddiqui8412]

brother relay me AC current ki positive wire deni ya neagative,,blub ki.............!! r 2nd question......agr ek blub holder k output me 2 blub lga den ek ki jga,,to relay pe koi asar pryga?

[@TASINTISSERVICES]

Hi. Can I have a copy of schematic diagram? For educational purposes only. I am making this for my subject project. Thankyou

[@yassinalnajem8393]

Did you find the schematic diagram for this circuit? because I need it to

[@alve__7777]

i didnt get the last part....which wire to connect to the breadboard from lamp and which one to the ac source

[@alexanderpuentes.285]

Did you figure it out?

[@YashRaj-sm2yn]

How it works can you please explain

[@floridabasumatary4361]

Can we use 555 timer ic instead of 4017 ic??? If so what are the chnges in the components

[@ALLLEGALSOLUTIONS-IN]

Sir please made a video on on off adjustable timers Please And from where I can get this assembly online please

[@w0357]

can i use a 9v battery instead?

[@kembangterate5384]

Is that real 100nf capacitors?but the code is 47nf???howw????

[@michelle422]

What are those yellow thingy? I don't think they're not included in the list of components... pls

[@TechStudyCell]

Capacitors

[@dineethadamsara9628]

How long distance it works bro?

[@yassinreda1688]

A great and useful electronic chip I want to please explain to me ، the maximum distance that I can get away and the process remains valid . And if a car passes by, and the air vibrates near the house, will the lamp work?

[@TechStudyCell]

If the sound is high the circuit may turn on by the passing by car

[@rajmakwana3941]

00

[@jacksonjeff7207]

Can use. 9V battery?

[@dudamsnehitha2292]

can you list out the components clearly?

[@mahfuzhasan3252]

Please give me circuit diagram for this project clap control home upon this tutorial.

[@vamsidevarakonda9302]

Bro in this circuit, resistors were 1/4 watt or 1M watt.

[@vamsidevarakonda9302]

Pls someone reply

[@TechStudyCell]

1/4 watt

[@sameeratreya414]

Can u give an alternative component for that capacitor that u used. I only have ceramic and electrolytic . I have never seen them

[@TechStudyCell]

You can use 0.1uF ceramic capacitors.

[@hatchiainz7473]

@@TechStudyCell how many volt is required if i use 0.1uf ?

[@jaganjas6034]

What is tha equalent ic for ic CD 4017

[@ΚυριάκοςΑλευράς]

I bought exactly the same accessories. I have done exactly the same circuit. not working . What could be wrong? thanks

[@TechStudyCell]

Check for any loose connection and wrong polarity

[@ΚυριάκοςΑλευράς]

Ok , i will try again and i will let you know . Thanks a lot !

[@vivek7boro781]

Sir in my circuit the led is on after putting my multimeter supply to the microphone to respective polarity.please help

[@youtubefamily7579]

SIR, WHAT IS THE NAME OF THIS RELAY I WANT TO KNOW

[@infinityx9937]

100nF = 104 ... Please correct... because 103= 10nF

[@410-santhoshi4]

May i know the voltage of capacitors that used.. When i ask that in semiconductor shop they are asking about voltages.. Could you please reply me soon... As the day of project expo is near by

[@manlikezakaado6135]

thanks but there is a problem i figured out on 1:13. the resistor should go to negative rail not positive rail otherwise the capacitor will be inversely polarized

[@joejohnson4137]

I have built several of these, using the design shown and all work perfectly. It is my understanding that ceramic capacitors do not have a positive or negative polarity, so I am a bit confused. Does it work equally well with the cap going to the negative rail? Also, just for information, the circuit can also be used with a PIR and it will latch it on as well. If you want to use a microphone module, the design will also allow that and it gives you the ability to control the gain to some extent.

[@ananyatungaturthi238]

can I use 9V battery supply by any chance? What modifications should I make?

[@babarazam1503]

Why does the bulb light up on the second clap?

[@battleforce5369]

Can I use 4.2v li-ion battery as power input?

[@kennmossman8701]

they are 3.7V and NO

[@thornbunthenofficial4492]

We did same as in the video, but it’s not working ? Can you help me ?

[@sameeratreya414]

Pro man. Thank you But what happens if u connect 9 v battery to it instead of 5v Does it work then ? Does it cause harm to the components.? Also can you specify the ratings of ur bulb ?

[@TechStudyCell]

The battery will soon drain out. I will suggest you to use 5v power bank or mobile charger.

[@masterplanner5142]

It will affect the component if u giv more that 5 volt or u can use voltage regulator

[@GKECSumaG]

@@TechStudyCell how to connect a 5v charger to bread board ... Plzz .. Reply I have... Completed all process ... But the main problem is power supply

[@GKECSumaG]

Rply me sirr

[@ananthuvijayan6411]

@@TechStudyCell 4v dc supply is okay with this circuit

[@Berghiker]

How far away will this work with a clap of the hands?

[@Notebook-ur1st]

Yho I'm back.....

[@syedshadabali699]

How many cost in this project

[@Dynamic-er8cz]

Bangla 300

[@adendaliehmohamed8269]

but i have a question can i use this project to light a fan

[@TechStudyCell]

You can connect any appliances with relay under 5A

[@kennmossman8701]

a fan does not light a fan blows air

[@zainabaziz8045]

Can someone share simulink model?

[@kcharan9879]

Hey can you tell applications of the circuit other than the home-automation

[@todorokishoto8864]

Hey my everything is working but at final my bulb is not glowing. My led is working at every clap but this issue is of blub, even though my bulb is in working condition. Please help

[@TechStudyCell]

Check the relay and use stable power supply.

[@Berghiker]

The audio front end of the circuit is not very sensitive for a soft clap with your hands. It's not very practical the way you have made it. It needs to be more sensitive.

[@kennmossman8701]

three choices 1 - use another gain stage 2 - use an op-amp instead 3 - use a lens cap from a flashlight to concentrate the sound

[@amsterdam9754]

it is okay if i use 6v relay instead of 5v relay. okay or not?

[@TechStudyCell]

You have to give 6V supply

[@kennmossman8701]

MAYBE if it is a high quality relay

[@moneshmonu3655]

Bro instead of 100nf I put 100 mu farad, it doesn't work.. is it must to put 100nf

[@kennmossman8701]

mu ????

[@whattodonxt28]

Bro it's not working, please help me out, i have to submit this project in my college

[@ashish1284]

Can we use 9V Battery?

[@bhuvaneshwarims6140]

Circuit diagram plz

[@naveenkumar3018]

Instead of270 kohms resistor which resistor can be used

[@joejohnson4137]

I built one with a 330 K resistor and it worked just fine. Anything close to a 270K should work, but when substituting, I generally go to the next larger value

[@kennmossman8701]

try 270,000 Ohms

[@jacksonjeff7207]

@@joejohnson4137did you use 5v adapter?

[@joejohnson4137]

Yes, and a 5 volt relay. @@jacksonjeff7207

[@udayshankar2968]

Can i use rps instead of mobile charger or can i use hw 5volt battery?

[@kennmossman8701]

rps??

[@schizz45]

Can I use a 9v battery instead of 5v ?

[@falakmehta3942]

I have also that query Pls reply me of you have got any solution

[@mohtashimali9669]

can u give circuit diagram pls ?

[@Deepeshagarwal297]

drive.google.com/file/d/1--DECHYLzEHwcgi6o2FhsoNYinPusFzE/view?usp=drivesdk

[@applemaeroca222]

hi i want to make this but im confused with its polarities in the cicuit diagram, can u help me?

[@Deepeshagarwal297]

drive.google.com/file/d/1--DECHYLzEHwcgi6o2FhsoNYinPusFzE/view?usp=drivesdk

[@timetoplay4614]

Hey i build this circuit. But the bulb switch on when only i blow air to the mic. When i stop blowing air the bulb turn off. What is the reason for this.

[@kennmossman8701]

bad breath

[@krizzakayetarun8959]

pwede po mahingi yung block diagram nyan?

[@seraphimnidhi4406]

We did same as in the video ..but its not working..no loose connections..whats may be the prblm???

[@TechStudyCell]

Make a high noise.

[@ananthuvijayan6411]

@@TechStudyCell please help me the led is glowing by just turning on the switch,not glowing by sensing sound

[@ananthuvijayan6411]

@@TechStudyCell there could be any components could be damaged or anything else you can suggest to me

[@vernonlombardt7403]

Where can I get the diagram

[@Deepeshagarwal297]

drive.google.com/file/d/1--DECHYLzEHwcgi6o2FhsoNYinPusFzE/view?usp=drivesdk

[@michelle422]

Hello. Can you send me a copy of the diagram for that project? Thank you.

[@Deepeshagarwal297]

drive.google.com/file/d/1--DECHYLzEHwcgi6o2FhsoNYinPusFzE/view?usp=drivesdk

[@hatsuki23.11]

@@Deepeshagarwal297 can you send again?

[@ergabibbo2301]

Hi , the CD4017 have a boot loader ?

[@لعمدةالبرصاوي]

Le projet a-t-il besoin d'un Arduino?????

[@adeelahmed5146]

I tried

[@behram45]

Hello sir I make all the connections but still not working can you help me?

[@brunopeter8670]

Same with me

[@RJNMusicc]

Aluminum Wire Hi Jaruri Hai Kya Use Krna Copper Ni Kar sakte Kya

[@ananthuvijayan6411]

I don't no I tried my best but not working,but still I am working on it

[@ananthuvijayan6411]

It worked 🔥🔥🔥

[@ananthuvijayan6411]

I just need to clap much harder to make it on/off

[@magicround3165]

Man I am about to die trying I am not sure where the problem really is but I think it's either the capacitor or the mic can you tell me what kind of capacitor and mic did you used🥲🙏

[@ShankarSajjan]

Bro not working this project what is the problem

[@chandutechtelugu5810]

Bro can I Use 9v relay in this circuit

[@androidenthusiast4943]

Bro what updates, i don't find 6v on the market also.

[@yim990512]

Can i use 330k resistor for 270k resistor position?

[@vaibhavaagrawal3724]

yes you can

[@mahesh-mx5nd]

This circuit dosenot working led is glowing continue

[@410-santhoshi4]

May i know the voltage of capacitors.?

[@TechStudyCell]

you can use 25V 35V 50V.....

[@kennmossman8701]

@@TechStudyCell or 12 or 16

[@emran630]

give circuit diagram plz

[@farah040]

what can I do to increase mic sensitivity?

[@kennmossman8701]

add another amplifier stage

[@brunopeter8670]

I try it but it did not work

[@lightmusic1090]

What will happen if I used a type A in the supply?

[@kennmossman8701]

type A what

[@fantwich334]

Kitna paise ho jayega

[@talhaaltindal]

İ was make it its seems likea sensivity but its doesnt sensivity

[@sushmitasaha9276]

Please send the circuit diagram🙏

[@Deepeshagarwal297]

drive.google.com/file/d/1--DECHYLzEHwcgi6o2FhsoNYinPusFzE/view?usp=drivesdk

[@electricdiy0408]

Music name

[@ananthuvijayan6411]

can I use a 4v 800m dc supply (by changing the 5v dc supply)

[@mrabdullahalam3392]

Kaise milega

[@timetoplay4614]

Hey what software did you used to make diagram at 5:15