Teenage Engineering EP-133 Tutorial from Scratch - PART II: Patterns & Scenes on KO II

[@fredicagoillanoise1309]

Thank you so much for explaining and performing the bar/pattern copy and paste. That's stumped me for the longest time.

[@rochefsky]

Happy to hear it was helpful!

[@thegearbuffguy420]

Thanks Your videos have helped me so much

[@rochefsky]

SO happy to hear that!

[@fredicagoillanoise1309]

Me too!

[@thefrankly]

Really appreciate this tutorial, I had gotten so far and was hung up on a couple things you brilliantly explain

[@rochefsky]

So happy to hear that ( not the “got hung up” part 😅 but that the video helped!)

[@rochefsky]

If you have more questions that have you stumped, check out my Quirks video: kzbin.info/www/bejne/namtnIB7gNBqgpY

[@BIG1TOWER]

You’re awesome man

[@rochefsky]

Made my night!! which makes you awesome too :) thanks!

[@VXNCE139]

Thank you! Very helpful and fun to watch : )

[@rochefsky]

Thanks for the encouragement!

[@Knypsterino]

So helpful. Thanks 🥁🎹

[@rochefsky]

Happy to help!

[@johnsager6947]

awesome video

[@rochefsky]

Thank you!🙏

[@cresshead]

Q. can you with ease copy say scene 5 to scene 10? (after the break down scene you ended on in the video) does pressing COMMIT in the current scene copy and paste that scene in the next available empty scene like say scene 10?

[@rochefsky]

No/yes… no you can’t easily copy a scene to another slot. Yes, the commit will duplicate to the next available scene (aka, the scene you can’t navigate to… not the next empty scene since there’s no such thing as an empty scene - only scenes with 4 empty patterns, which don’t count as empty scenes :) Hope that’s clear… 😅😬

[@cresshead]

thanks for the prompt reply - appreciated@@rochefsky

[@fredicagoillanoise1309]

If you want to copy and paste the entire pattern, how would you go about doing it? Let's say if you want to copy a 4 bar pattern to make it 8,16 or 32....

[@rochefsky]

In todays firmware, you either can copy one bar or the whole pattern - so the only way to achieve copying a four bar pattern to a longer pattern is to copy one bar at a time into the respective bars where you want it in the longer pattern… Worse yet: if you try to copy a 4 bar pattern and paste into a 16 bar pattern, it changes the 16 bar pattern to 4 bars… so you can’t, for example, paste the same 4 bars 4 times to get the 16 bar pattern. This is certain to be improved in future firmware in my view.