TEETH MODEL POUR GONE BAD | Top Mistakes Dental Assistants Should Avoid!

#dentalmodels #teethwhitening #dentalassistant
𝐏𝐨𝐮𝐫𝐢𝐧𝐠 𝐃𝐞𝐧𝐭𝐚𝐥 𝐌𝐨𝐝𝐞𝐥𝐬 𝐟𝐨𝐫 𝐖𝐡𝐢𝐭𝐞𝐧𝐢𝐧𝐠 𝐓𝐫𝐚𝐲𝐬
-HOW TO TAKE ALGINATE IMPRESSIONS
• ALGINATE IMPRESSIONS |...
-HOW TO FABRICATE A TEMPORARY CROWN
• HOW TO MAKE A TEMPORAR...
---〰️---
✦ 𝐒𝐎𝐂𝐈𝐀𝐋 𝐌𝐄𝐃𝐈𝐀 ✦
◎ Instagram ▸ / dental_vibe. .
◎ KZbin ▸ / @dentalvibes
◎TikTok ▸ @DentalVibes
---〰️---
𝐕𝐈𝐃𝐄𝐎 𝐓𝐎𝐏𝐈𝐂: We wanted to create a video sharing our best tips on how to pour good dental models specifically to fabricate whitening trays. However, it turned out to be a disaster! But, we learn best from our mistakes, so we decided to still share this video and discuss what went wrong and point out the main mistakes to avoid when pouring models for whitening trays. Stay tune for our video on how to ACTUALLY pour GREAT models ;)
Tells us YOUR disaster story of pouring models!
Please Like, Subscribe & Comment below!👇🏼
---〰️---
Twice Toothpaste ▸ www.smiletwice...
𝙁𝙍𝙀𝙀 Shipping Code: 𝐃𝐄𝐍𝐓𝐀𝐋𝐕𝐈𝐁𝐄𝐒
𝐁𝐮𝐬𝐢𝐧𝐞𝐬𝐬 𝐈𝐧𝐪𝐮𝐢𝐫𝐢𝐞𝐬: [e-mail]
🎧 Music by @ikson - Soda (Happy Beat), Sahara (Official)-Tropical
/ ikson

[@beckyheitmann2299]

I hate lab work and I've been doing this for over 20 years. God bless you assistants out there that enjoy it!!

[@demetriaalexander1192]

I was taught in school to agitate the stone on the vibrator before loading the tray like Gabby did! Also after filling the teeth with stone we would sit the impression flat on the vibrator to get rid of any bubbles and then set to the side and build our base. Great video and I like that you shared the fails with us, we all make mistakes and it makes us better assistants and trainers when we learn from them!

[@karlanm925]

How i train people to pour models is they must visually watch the stone fill every void, only adding in #2/15 or #17/31 areas and slow down by tilting the impression in the opposite direction everytime it reaches a "waterfall" point.... If you don't watch it run down the distal wall, and fill up in the bottom to the top, then you probably have a bubble. Using a small tool, like a PK, with stone can help fill crown preps and lone anterior teeth without a bubble. 16 years as a lab tech. Great channel btw 👌

[@DentalVibes]

We agree 😊😊

[@rayrei8620]

Thank you for showing the downside of pouring models! No matter how 'by the book' I pour my models, they always come out with air bubbles. I've even tried all the tips and tricks people told me to use.

[@DentalVibes]

Make sure the impressions are dry and pour them slowly. I was really BAD at the beginning but, as with everything, practice will help! -Carla

[@nataliehorton7321]

Quick set snap stone , is the BEST ! Also the thicker the mix, less bubbles you will have☺️ flipping models can actually call air bubbles/voids as well. We make bleach trays from start to finish in about 10 minutes with patient in the chair. (maybe not advice for New DA’s) Also start by putting a small amount of stone in the posterior of the model, and slowly vibrated all the way around adding a little at a time. If you use the quick snack Quickstone put it in a bowl of hot water immediately after pouring and you can pull the model in less than five minutes! ☺️🦷 Also love you guys! Your videos are so relatable and funny! Thank you!😁 Natalie

[@DentalVibes]

Thank you for all your tips 🦷🦷🦷

[@thedentaladvocate3609]

I like that peanut butter consistency, it's funny that you guys chose this subject, because I'm at new office now, and the doctor wanted to see my pour ups. I have got my technique down by watching and adding what has improved my technique over the years, and rarely do I get any bubbles. Well, he was watching me, and when I was done he said, " Ok, let me show you how to pour it up so there are no bubbles", he grabbed my spatula, emptied the impression of the stone I critically and carefully watched go in and out of each tooth, poured new stone in the teeth without being as careful as me, then grabbed an instrumented poked around to rid the stone of bubbles. I just about cried! Those were the things I removed from my pour up technique to avoid bubbles, and then I became the assistant that needed to be taught how to pour without proving my technique first lol, I was cracking up in my head, and at the same time felt like my technique was better, and less time consuming.

[@DentalVibes]

The Dental Advocate that’s hilarious! Soo clearly we were rushing here and it didn’t turn out great 😩😂 but you know what? We all go through those days! We thought it was important to show how we all make mistakes. But, it’s important to acknowledge the mistakes to figure out how to fix it. Stay tuned for our bleaching trays video using these bad models 🥴

[@svetlanabachtell7839]

It is very important to have proper measurement for mixing stone, if you do not want to waste material and have good quality stone models. Water is always 1st, then you add stone powder.

[@g.molina3269]

I would love to see a study models pour! Especially how you a freehand base, how you would use a premise base form and trimming the freehand bases

[@DentalVibes]

We are planning to do an updated version of this video, stay tuned!

[@catherinemcfarland5119]

Your videos are so helpful and much appreciated! 💜

[@DentalVibes]

Catherine McFarland awww 💕💕 thanks for the love!

[@dontiadentalcarekolkata]

Hello there