DO OUR VIDEOS HELP? SUPPORT THE CHANNEL and help us make more content! Buy rubber tracks, heavy duty tooling, and undercarriage parts at tinyurl.com/Support-TekamoHD
@leobhangu4 жыл бұрын
Instead of taking the snap ring off , he should've rotate the filter 180° and remove the whole canister out. That way you are not releasing any dirt out. That's the right way.
@ADITYASHARMAACADEMY3 жыл бұрын
kzbin.info/www/bejne/d2fRoKetasurfck
@jondoherty36783 жыл бұрын
You have to take the snap ring off then turn 180 degrees
@Resleeved2 жыл бұрын
Need to rotate the whole cannister 180 degrees, then remove the entire cannister and THEN change the filter and drain the dirty oil. Doing it this way keeps all the dirty oil in the tank.
@jaichandkamboj3463Ай бұрын
Your work is good
@nrxhavoc2 жыл бұрын
chromes on an impact this guy is a savage
@jesegarcia89022 жыл бұрын
Don't let snap one see it lol
@DB-oz2kiАй бұрын
I like your videos, however on this one, one thing got me. Remove the cap to the tank to remove any pressure, then put it back on. You left it off moving bolts over it, dropping a bolt into the tank could happen.
@heavymachinery28433 жыл бұрын
I like to put bolts in plastic boxes or magnetic trays when i work on heavy equipment good work 👍
@TekamoHD3 жыл бұрын
Thanks for watching! Let us know if there's any video you'd like us to make.
@emichaelschmidt2 жыл бұрын
@@TekamoHD EGR/SCR delete!
@ramosel3 жыл бұрын
That's not the correct way to change the Hydraulic filter. You just dumped dirty oil into the tank line. There are directions on that handle on how to do it right.
@amathonn4 жыл бұрын
Am I the only guy that sees a klutz like me dropping one of those bolts and watching it bounce into the hydraulic tank?
@ADITYASHARMAACADEMY3 жыл бұрын
kzbin.info/www/bejne/d2fRoKetasurfck
@omerkhalil70652 жыл бұрын
Very informativ vedios thanks for sharing this type of knowledg
@maxpower963111 ай бұрын
thanks Keith, have old Deere excavator....this will help !
@TekamoHD11 ай бұрын
you're welcome, glad it helped
@SunilSingh-xw2hg9 ай бұрын
Good video im glad i found this❤❤
@martinkoche43755 ай бұрын
Thank you
@yunianisa81343 жыл бұрын
Trimakasih mister. Salam dari indonesia
@jaichandkamboj3463Ай бұрын
You're work like it
@nelsonsantos7703 жыл бұрын
oil from the filter still looks so clean though!
@reelMn2 жыл бұрын
H thanks for the video. My Hitachi UH061 has a strange round smaller cap on the top of the suction filter - feels like rubber - it’s under the fluid level. I haven’t figured out how to remove it. Any ideas?
@makimohamed13073 жыл бұрын
شكرا شكرا
@HarleyMothersole2 жыл бұрын
What snap on drill is he using?
@bernhordredecop23192 жыл бұрын
Does it help to change the return filter for the hydraulic oil getting hot?
@operatormudascebeh40713 жыл бұрын
Perfect
@TekamoHD3 жыл бұрын
Glad you think so. Let us know if there's any other video we can create to help.
@leobardosantos2594 жыл бұрын
How to replace hydraulic filter on 2007 304E CR ?
@behelpful14352 жыл бұрын
At 2:54, what do you mean be seal pieces?
@jagannathmahapatra80574 жыл бұрын
After how much hours we change hydraulic filters?
@Senkino5o4 жыл бұрын
Work it out bud.
@ADITYASHARMAACADEMY3 жыл бұрын
kzbin.info/www/bejne/d2fRoKetasurfck
@ADITYASHARMAACADEMY3 жыл бұрын
kzbin.info/www/bejne/d2fRoKetasurfck
@martinbernal56932 жыл бұрын
Loosen the cap, don’t remove it. Don’t want to accidentally drop a bolt down there. Ask me how I know about that.
@cocomaster37554 күн бұрын
Yeah I paused the video about 10 seconds too soon... Heads up everyone push the button on the Volvo push the button on the volvo!
@DontFuckWithMexicans3 жыл бұрын
Great video! its helping get me through my foundations!
@TekamoHD3 жыл бұрын
Glad we could help you get through your foundations! Let us know if there are certain topics you would like us to cover.
@mdrajan10194 жыл бұрын
Hi sir. 1st thnx. Ur video is very useful. But 1 time u did mistake. U r open hydrolic tank cover. Remove gas but u not fix cover and remove bolt. Any bolt slip ur hand and drop in tank after to much prblm.
@ADITYASHARMAACADEMY3 жыл бұрын
kzbin.info/www/bejne/d2fRoKetasurfck
@neilgordo46549 ай бұрын
What is the make of the Impact wrench
@esteban_alonso5 ай бұрын
Snap-on
@gokulratheesh7399 Жыл бұрын
Which country you are working
@tomasgilboy53623 жыл бұрын
Dose it mater the level of the hydraulic oil tank wants it above the Minimum mark or can you put to puck oil in
@user-in1zq4im9b2 жыл бұрын
Фильтр гидрораспр
@kristiheitz30223 жыл бұрын
Do you know how to drain the hydraulic oil on a 938M wheel loader?
@erwinvandenhoven11983 жыл бұрын
Machine manual
@westernstar49643 жыл бұрын
Open one of the side access doors. A tube will be routed there from the tank
@RAVINDRAKUL3 жыл бұрын
Hi wants to join your team.
@SteveXNYC Жыл бұрын
A filter with no sump is a waste.
@mdrajan10194 жыл бұрын
Sorry if you felt hurt
@ADITYASHARMAACADEMY3 жыл бұрын
kzbin.info/www/bejne/d2fRoKetasurfck
@jaybell91453 жыл бұрын
U shud have changed new gloves when u held the new filters.dirt already clinged to ur gloves and will stick into new filter.