Temp fix: Meepo V2+ hub motor clicking

[@gtrkev2]

Thank you! I just fixed my Wowgo3 hub motor board that had a loud clicking noise on one of the hub wheels. Put Permatex “Synthetic Ultra Lube” brake part lubricant where you suggest. Stopped clicking noise 100%. NICE!!!!!

[@wawaenui]

I think that this sound is coming from the covers coming loose not the sleeve. I took the covers off and stood on the board and rolled back and forth with no sound. Then I use blue loctite on the screws and put the covers back on. Now not sound. I had recently put oil on the screws because they were rusting and then the cracking sound suddenly appeared because they were coming loose.

[@RADERFPV]

Dude, you are a boss! I have the V2P and it does the same exact thing. Meepo isn't responding to my emails, so I thought I'd never come across a solution. I can't wait to try this out, thank you!!!

[@orlandomarinjr]

They'll respond eventually. It's a small Chinese company. Literally like 12 guys. You're better off going with Boosted or Evolve. My cousin waited 8 weeks for any response from them after buying a new board then canceled his order. You kind of get what you pay for

[@MareOfficial]

Did it work? Looking to buy the v2 plus but not if this does not work...

[@RADERFPV]

Mare I won't know for a couple more days. My family and I are in the middle of moving, but I'll be trying this no later than Saturday. I need the board for work, so it won't be long. I'll let you know ASAP.

[@MareOfficial]

Brian Rader Thanks! I will purchase it tonight! Taking the chance!

[@RADERFPV]

Mare I wouldn't worry much about the clicking... I don't think it's hurting anything at all, and it's not that noticable. It's a great board, you'll love it.

[@SuperHotBM]

I put contact cement in the grooves. Let it dry and make sure the loctite has 24 hours to cure before riding it. No clicking and works good and solid. I will just replace the whole motor if I have to.

[@chuckmaddison2924]

Have just had this problem on another board took a while to figure out. What I did was clean and swap sides . Seems to have fixed only problem was bending over and twisting to listen while riding I fell off so now board fixed and me a bloody mess.

[@mastercontrol200]

Thank you for demonstrating this! Can you post another video detailing the results of your lubrication of the PU?

[@WilliamOwens1]

That’s a waste of time and money. That is a no moving part .

[@azureus182]

For me, the rattling sound come from the PU that unglued himself from the aluminum because of the heat from the road and the motors. That create a gap between the two at the beginning, now the PU just slip on it and can get out of its location witch is really dangerous, i can't ride anymore. Kieran send me a pair of remplaçable PU but i hope I will find another brand that offer better quality PU that i can mount on my V2p !

[@thomasvidal3014]

I just discovered a clicking around same area . Im considering removing motor from truck axel because I noticed that when riding the noise isnt immediate , but when it does start if I move my weight off of rear section to front half of deck noise stops almost completely. "PERHAPS" ( word of the day. Pretty good Ehh?) a small piece of the axel shaft sheared off inside where shaft meets motor. In my case to me it sounds more like a sharp object would click, while a tire I would guess have more of a "Visquishy "Visquashy" sound. (Inside joke to all that know ) Only my opinion. If and when i find the cause of click I will post somewhere or everywhere, but not nowhere!!!. Till then

[@adamreid9078]

Having the same issue. Did you figure out what the noise was from?

[@ryduran635]

Looks like there is another swappable pu out there and I have a feeling that is apart of the issue. Go to their website

[@Zoids-bf6op]

I have this problem with the wowgo that I can remove the put tyre. Do you have any tips on how to remove it? I've tried oil but no success.

[@tango110]

I ended up using a metal saw to cut and pry it off. It looks like the tolerances are really off for these. Next time I'm going to use a file to take a few millimeters off the inside of the grooves to try and fix it. I hope this helps.

[@stonybrook421]

Grease would probably work too..

[@thomas.champagne]

Nice i'm still having the problem. I will try that. What's the reddit link FMI?

[@mikegatlin1ify]

Thomas Champagne it was actually in the Meepo Facebook group. I'm also still having the issue as well... This helped but only for a few miles...I will edit the video info to reflect

[@thomas.champagne]

Thanks. You should read this one so: www.reddit.com/r/ElectricSkateboarding/comments/8tngdx/meepo_v2_issues/. Your feedback about it is welcome :)

[@cassius969]

Dude underwear !