DIY カリンバの作り方 How to make a kalimba.

[@UtkarshAmitabhSrivastava]

Wait, did you just split that large board in half almost flawlessly, using a hand saw? *Respect*

[@eggyboi1217]

The pull saws allow for very high accuracy! I’m getting one asap.

[@dwigtschrude]

Ch1ldofSatan they’re the best. Hope you enjoy it

[@BluesofButterfly]

I was like...😮😮

[@zkproductions91]

I can make the box with wood, bt how can i buy the steel Rod n these things???

[@UtkarshAmitabhSrivastava]

@@zkproductions91 kalimba kits are available online.

[@rassamassa_]

3:42 *Scratching wood sounds* Subtitles: Music

[@kelthekid6940]

Deaf people: *groovin*

[@i_was_just_kidding_ah_dont_hit]

KZbin thought the video is *Benny benassi- satisfaction*

[@benjaoliva3383]

* me, search how to make a Kalimba *Video: you need a lot of kalimba tools to make a kalimba* * Again me, search's how to make kalimba tools to make a kalimba

[@wavesrasalhadd7572]

Good luck 👍

[@samsimpleway6007]

I went here to save budget.

[@somosprolongaciondelsolasu2053]

dont "look 4 it" ( tools 2 "Made") MAKE IT DUDIEEE = just = ¡¡ make it !!! ad nothing about "good lucks" JUST D-DOOO = IIIT !!!...wish u the most abundant "luck" ¡¡ just make iiittt !!! ( just in case i *would YES* done it BUT PRIOR to watching this !!....leave all such guys on their owns TRUST ME !! : )

[@t6amygdala]

@@samsimpleway6007 I came here because I realised that these instruments had to have been made using basic materials somehow back when Africa invented them

[@riz823]

It's not that expensive, you know? You can just buy it online

[@zhadann_]

That guy has some serious skill This is amazing!!!

[@生煮えの鯖缶]

綺麗な木だなぁ

[@_molly3000]

It made me so happy seeing you play your kalimba

[@MazzaCheewanich]

I am so amazed how he combine the box with wrap tape and rubber band...never thought of that before.

[@GordiansKnotHere]

Late response but that was my exact thought!

[@na0tar00428]

（開く前）カリンバDIYできるんだ！参考にしよう！ （開いた後）いや、職人やんか…

[@mimitabu_ura_shiawase]

犬神莉亜 この漢字ってどう見ても聞くじゃなくって開くな気が……… まぁいいやプリン食お

[@dngkshojo]

@@mimitabu_ura_shiawase 動画を「開く」で合っているかと^^

[@ソラマメ-l2w]

海外勢ばっかだから海外自作ニキの動画かと思ったら出てきた塗料的なのが日本語でびびった

[@dwigtschrude]

I love the planer jig you have for the miter joints!

[@WyldeChef]

I need to see how he got the keys installed

[@Jettie828]

Okay after many hours of struggling heres how u add the keys. Put all the keys in the bridge holes and keep the top bar in place. After set i taped the sliding buggers. Make sure the tines stick up a bit over that top bridge. Now the bottom wooden bridge thing with the metal bar. Thats going to get shoved in tine by tine sideways. The bridge will be way lowered on the instrument and pushed up after all the tines are on. I went left to right by hand, lift a tine and put it on the lower bridge. Slide said bridge over and add the next tine. Be sure to keep track that your 1st tine isnt slipping off the top brudge or its really hard to pry back on. Best of luck all

[@sevgi6026]

@@Jettie828 respect

[@oreosmooshy]

For any future readers, here’s how I did it. I’m gonna phrase things simply with minimum lingo. First attach your two wood bars to the kalimba body (but do not glue in the small metal bar, leave it off for now). Then screw in the large metal bar. Slide in each of the tines so that they’re resting on the wood on either side, going through the large metal bar in the middle. The fit should be snug but manageable. If you are having trouble getting the tines through, loosen the screws a little bit so that the large metal bar can sit a little higher. Once they’re all in, you will start sliding in the small metal bar along its wooden groove, lifting each tine one by one so that it fits underneath. This will give your tines a tight fit so they can now be tuned.

[@andreeadobre3190]

Wish I read all this before I built mine and murdered my fingers squeezing in the tines with everything else glued and screwed in place.

[@gregoryblair9810]

that is why I came, also. They skip right over the most important part!

[@eugenedemaestri7879]

C'est très beau, un travail de qualité, c'est impressionnant.

[@LopsideMakes]

You pulled out that wood and I was like “That’s too much for me, I wanted to build my kalimba out of sticks and mud..” Really cool to see you work though! Good job!

[@sunstrikersunchild233]

I've seen some kalimba making kits online, but with flatboard walnut bases. Cool to see how box kalimbas are made. Have not heard one made from sapele wood, the finnished product looks awesome! 🥰

[@parmit3915]

OmG, you are so detail! Love to see how the process of making kalimba.. 😊

[@krammi]

this is so beautiful i want to make one for my best friend

[@tako5045]

I want to have you as my best friend 😆

[@jazzie2967]

Aww the fact that you wanted to handmake it will be even more special, h9pe your friend is happy ^^

[@isaiah-ni5oq]

Wow so pretty for howits made with mostly hand tools

[@ozzybargainhunter2245]

LOL..... I love the way way effect at the end, i had a chuckle!!

[@CHTvINVENTOREFUORINORMA]

Great work bro

[@chehwadhiabhihendu180]

I like your craftsmanship.

[@dch888]

Great work with simple tools! Great sawing!

[@lolitawilson4970]

Great work!!

[@eggyboi1217]

I really need to invest in one of those pull saws.

[@Elegante.]

Le tout avec des outils à main, un savoir-faire rare !

[@ilovebirds2094]

That’s amazing, i have no words!

[@LanguageStuff]

Cool build video!

[@syperc]

This was so crafty, very few electrical hardware needed. That was skilful

[@crisheathcliff1417]

Great work

[@romelfranco3379]

estoy impactado de la meticulosidad de los japoneses para hacer artesanias y diseños! es realmente sorprendente

[@さわ-s7x]

凄すぎる。。

[@nerveseus7069]

Wonderful work mate.

[@Mikichan85]

Amazing how you could be this instrument!!!

[@nu2981]

素晴らしい！Excellent！cool！

[@joshuawest9438]

Wow nice build

[@tengucraft]

Thanks!

[@ЧайКаркаде-ь8э]

Good job

[@ЧайКаркаде-ь8э]

What wood is made of?

[@DeAdHiGh_666]

Very easy to make it

[@kamyzhong4349]

How to get the metals and what is the device used in 13:21

[@betulozgul252]

i think it is wonderful 👌🏻👌🏻👌🏻 lovely😍

[@orion2668]

This is amazing!

[@nataviva2562]

Я увидела как делают мою😊 калимбу🎉❤ Спасибо 🌸

[@viixine7666]

Title: DIY Me: Excuse me, sir, no one is going to have what is needed to make this!-

[@eggyboi1217]

Many people will have this problem, but the only thing I’m missing is the hand plane and the pull saw. I do have other tools I could substitute with though!

[@gwenshairdye5000]

I actually have the stuff to make this I bought a Kalimba but there wasn’t a wooden part 😔 T^T

[@01LunaMoonDragon]

Yes... But I have a friend who is a luthier...he might make me one.. :D

[@rodellol.5349]

Don't bother making a wooden box and use a solid block of wood instead. It will be much easier.

[@Umski]

I beg to differ, unless you think he was going to use a cereal box and sticky tape to make it?! - he is using basic hand tools and has essentially crafted an instrument from scrap wood on a fold up workbench - watch any 'DIY' woodworking channel and they'd have used a whole bunch of power tools to do the same thing - splitting a board with a saw that accurately is no mean feat (usually done on a bandsaw) so the manner in which he has done it is eminently DIY IMO and yes I do have what's needed to make this, albeit I might go about doing some things slightly differently. It's an excellent piece of craftsmanship :)

[@dinozaurka7004]

Actually didn't learn how to build kalimba, but there are so many tips.. i mean so useful

[@phillipjohnaraza2583]

nice work

[@atlaslearn8885]

Can you post the dimensions for this please?

[@alurang4647]

6:44 the cat

[@vivianshi9668]

MEOWWWWWWW

[@frankenstein6223]

Soooooo?

[@Casxedy_Rez]

I thought its my cat meowing...

[@user-rd1zd7kj3j]

و بعدها:)؟

[@arthurvalente8508]

Incredible Luthier

[@tarkbaldan751]

What is the measiruments of woods or can you have a technical drawing this wood

[@jakemcguire9304]

Just kind of guessing, but based on the size of his hands in comparison to the kalimba itself, I'd say it's probably about 8 inches in length, 4 inches in width, and 1 inch height. Again just a guess Edit: actually probably more like 5 inches in width

[@tarkbaldan751]

@@jakemcguire9304 Thanks for your support but I did my Kalimba 5 months ago :) I didnt found measiruments any where but I guess how much is it. The measiruments which my using are 13cm*18cm and height is 4.5 cm it is my guess but I did technical drawing using Solidworks because of I am a mechanical engineering student if you want to reach my sketch you can click this link and you can download 3D Kalimba drawing: grabcad.com/library/kalimba-finger-piano-1

[@vicro4193]

welp, I thought it was gonna be an easy tutorial lol

[@kom_5979]

I saw you on a slogoman video's comment sayinh I miss josh saying "Hell Yeah!"

[@vicro4193]

Wait wut - btw hey buddy!

[@ЕкатеринаКржечевская]

just do one that’s without any holes

[@gregmatchett7110]

It's easy if you just source the wood at better measurements but they probably only get one size.

[@vicro4193]

@@gregmatchett7110 its kinda hard to find custom cut wood around here, normally they just sell a bunch in a pack and they normally have the same measurements on every pack

[@multi_misa72]

Awesome, now i have to make one.

[@mohitupadhyay8227]

For how much u will sell it i want to buy it

[@emyyyyyy39]

Well that was satisfying

[@jksprecast2957]

I think I will make one and add a electric amplifier connection.

[@sheilaainarafales9774]

Wow great work! I wanna know whats the measurements for this so i can make one.

[@Enviotonin85]

Having to see how much a ready made one cost i guess i rather just op of the ready made ones. But its do much easier to make it using resin

[@般若心経-d2m]

設計図と材料がほしい…

[@PIKACHU-jl3po]

I think it will sustain better if the bridge and backstop is nearer... All in all I enjoyed watching this video tnk u for sharing 💟

[@東京カリンバ劇場]

自分で作りたいけど難易度高そう😱

[@吾輩は猫である名前はまだ-y5w]

カリンバ作れるの！？ →動画ある！ →あ、そんなに本格的じゃなくて 大丈夫☺️ 買うよりお金かかりそ笑

[@RobertOcarina]

Hi. Great Job ! How can I buy the metal Keys for Kalimba?

[@tengucraft]

I bought in amazon. amzn.to/2nRxEOy

[@RobertOcarina]

@@tengucraft Thank You so Much !

[@JohnPorsbjerg]

Does anyone know wether the quality of the box is very important to the sound quality? I think it would be neat to make a kalimba out of a vintage cigar box :))

[@sonyadiputra6162]

Hey how to tune you kalimba?

[@zkproductions91]

I can make the box with wood, bt how can i buy the steel Rod n these things??? Can anyone suggest me the link of it🙏 please

[@jazzie2967]

If you live in the states where there are walmarts i suggest this www.walmart.com/ip/17-Keys-Kalimba-DIY-Set-Steel-Keys-Lettering-Kalimba-Keyboard-Musical-Instrument-Replacement-Supplies/841123269?wmlspartner=wlpa&selectedSellerId=101019803&&adid=22222222228374909812&wl0=&wl1=g&wl2=m&wl3=473235552857&wl4=aud-430887228898:pla-1009527322284&wl5=9030190&wl6=&wl7=&wl8=&wl9=pla&wl10=189918994&wl11=online&wl12=841123269&veh=sem&gclid=Cj0KCQiAk53-BRD0ARIsAJuNhptKPjxBLtl1Jy6mW08qTwY2ck2g4zmaP9_Hatr3CN9A5hQ426LIkxQaAqMMEALw_wcB I hope it helps ^^

[@pamelavalenzuela3440]

UN TRABAJO PRECIOSO MUY DELICADO EXELENTE

[@Amina-cs1zy]

У тебя золотые руки ❤️

[@chrisstaylor8377]

Why beveled joints ,then you had to fill them ?

[@ショーワゥマーレ]

鍵盤を通すところが見たかったのよ〜(笑)

[@doudoub2012]

excellent!

[@zdenkobenkourekar8091]

Where can i buy keys an metal parts for kalimba

[@eduardacoimbra1702]

Amazing

[@madebybobbie]

Also very nice 45 degree bevel shootingboard! What is that yellow coating on top?

[@savalan2552]

Thank you bro

[@shadowrose1130]

I want a kalimba 💖

[@tang_kobe]

Can someone give me more details about steps and what's the length when you cut?

[@keterclassscenario6404]

Dose this require a specific type of wood or will any wood do?

[@flipster7285]

Please help!!! Would love to build this design but when trying to translate the instructions I only get gibberish from google. Anybody perhaps know if there are english instructions somewhere?

[@izakolanko3979]

Should I use a special type of wood or can I use plywood?

[@agrimonyscrafts2089]

I made my Kalimba from popsicle sticks but my tines all sound dead. what did I do wrong??

[@Remi157]

Wonderful😍😍

[@tomzietgames9764]

I have a question scratching the wood must that??

[@Angelica-yn9rb]

Hope I can have one🥺

[@DanielCardenas23]

Who needs to buy one? when you can make one. Lol

[@dwigtschrude]

Ah the Japanese pull saw, my favorite

[@shubh-bankingaspirant827]

Which metal is used to make tines ?

[@josephjisa9788]

Sooooo where can you find the hardware and specifications to build it?

[@Hobbyen-met-Peter]

where can i buy those steel strips?

[@suryabaliart3753]

I like it, i want to ask you what kind wood you Make and how do you get the metal tune????🙏🙏🙏

[@DavidJohnShewsbury]

He use sapele wood. The tuning you can use phone apps, downloadable from Android Playstore or Apple Store equivalent, example like "gStrings" or "Soundcorset".

[@alfajhoycuaresma2079]

Maybe he was selling a kalimba so he did get the metal keys or the inventor of kalimba

[@NoEcchiNoLife]

Ur hand saw...is sharp Dudee...😂

[@pqgoes]

you have indeed the hands of a mason. you can easily see that by the way he plays the kalimba. LOL so rough. jokes apart, you made an awesome work!

[@abisha6166]

Anybody noted down the measurents?

[@sheilaezequiel9072]

Adorei o instrumento! Pena ser tão baixo o som...

[@MS-gt9ou]

My god! How could you cut it to two pieces from the side!

[@dwinurcahyo4013]

What wood is this,

[@Tome4kkkk]

What brands are your black and silver squares? edit: I can see the silver one is Shinwa.

[@甘党の憲兵]

次回「不審者の人と動画内容交換してみた」

[@elijahharing]

What tool is that? 7:25

[@brady29_]

Its a rat tail file

[@rachatinnarm89]

45度に鉋かけれる治具はどういう仕組みになっているのでしょうか？ 治具を鉋で削らない仕組みとは？ 材をちょっと張り出して削ってる感じですかね？

[@ryantimiko2547]

Can I buy that?

[@skymantelevision9654]

Wow!

[@ziaa4428]

Im so bored so i watched this Ngl this was good

[@sullivan1390]

fantastico! eu aprecio muito esse instrumento!