Terminator X transbrake & bump wiring & setup

[@rangerst_870]

for those who might want to find the wiring diagram since Holley changed their website around, it is now called "Terminator X Reference Manual" all the way at the bottom of the page under SUPPORT FILES. The diagram he is referencing is on page 35 of that manual.

[@bensinger5229]

B 10 connect where on the ssr?? Great video helped alot

[@killakeshaun]

Does it matter if I’m using b3 or b10. I’m using b3 but it seems to not have my Transbrake working.

[@rangerst_870]

Output 3 B10 G Grey/Black AC Shutdown Ground

[@seagate40]

On your IO tab do you really need to make those 2 inputs??? I’m using the Holley features staging and transbrake launch which makes the inputs for me???? I ask because my brake works but bump does nothing n it’s for sure wired correctly with NOS ssr

[@rangerst_870]

yes, because one is the transbrake activation and the other is the bump button. You MUST have 2 separate buttons in order for it to work properly. The bump triggers a timed output which should release the transbrake for a given time to allow the solenoid time to release, move the car, and re-engage. You may have to mess with the times some. Also remember that the level of the movement will vary based on time and engine RPM.

[@calebdickman6899]

What’s does pwm

[@jasonstrester]

Mine term x dont have “staging” why?

[@rangerst_870]

are you looking in the right spot?

[@mikewallace2340]

Very nasaly, couldn't follow

[@jasonstrester]

Zero help. Waste time