Im hopeful that this video answers any and all questions on how to wire and program and setup the staging functions in both Holley Efi v5 software and Terminator x Software
Пікірлер: 112
@lesdavenport66493 жыл бұрын
I’m brand new to tuning and have to say between you and Joe Simpson I am a hell of a lot more informed than I was a week ago. Awesome stuff man, thank you!!
@gregcochran56944 жыл бұрын
Damn I’m glad you release these videos. Helping me out a ton. Thanks for the content keep it coming
@johnnysautorepair.customs62914 жыл бұрын
This is such a relief knowing how to setup my TB and bump function! Thank you sir.
@ToddByrne2 жыл бұрын
Thank you so much. This is such invaluable information. Really like the 20v inputs so you can tie two inputs to a single output. Learned a bunch just with the difference between pwm negative and positive.
@Reject064 жыл бұрын
LOL that damn pointer! hahaha!! loving the new line up of vids man, definitely learning alot
@clydecarlson53582 жыл бұрын
Wanted to say thanks Devin. Your directions on setting up smooth bump-in worked really well for me. On the street only staging around 3,700 rpm I had to lower my PWM to mid 50s to get movement, but it was very smooth. So bring on the 1 second reaction limit at Sick Week....
@rhettgrady90964 жыл бұрын
Dude you are hilarious,as always great video, thanks for the information you share.glad I got to meet you at piedmont.
@SloppyMechanics4 жыл бұрын
I enjoyed the magnet slapping
@loumont14 жыл бұрын
He was directly dissing you in the video
@scrappyclappedoutfoxbody41743 жыл бұрын
Man I did too
@sgujwine4 жыл бұрын
Appreciate the video..... nice way to double check my work Thanks
@mikerose84864 жыл бұрын
Best video by far! Most asked question about Holley ever haha
@vinnyzara83773 жыл бұрын
I used the staging pulsing negative and it works perfectly
@ktmr82 жыл бұрын
Awesome thanks! Appreciate the tutorials 👍
@88_turbo_fox73 Жыл бұрын
Works perfect, not violent just eases right forward
@FadetoBlack14634 жыл бұрын
Great content Devin !
@fullspoolcustoms39443 жыл бұрын
This video is awesome keep it up dude
@buiItnotbought4 жыл бұрын
That telescopic magnet got used more than all of ours at home did in its lifetime
@jrgonzalez57813 жыл бұрын
Love your video...
@Crymeariver6762 жыл бұрын
I love this guy
@hiteracing148911 ай бұрын
Awesome videos very helpful one question the black/yellow wire is that just tapped into a pwm wire also same for boost controller solenoid
@lesomori2934 жыл бұрын
Hey Devin, Which way is better to wire the bump? The older video you made with the TB switch between the 12 volt source and the relay or this current way in this video? Thanks for all the valuable videos!
@mjminino4 жыл бұрын
Love the passive aggressiveness lol ❤️
@timcarroll16814 жыл бұрын
He is cracking me up
@anetworkservice3 жыл бұрын
Thank you Devin another good informative video. I had a question, Holley sells the kit for TransBrake connections. I expect that it is for stray voltage or something. I bought one and I'm still not sure about it and don't see it in your diagram. PT# 554-128 TB Input Protection...???
@Powersawjunky4 жыл бұрын
Fucking love it dude! Thanks for doing this! Nice converter
@k20edef14 жыл бұрын
Although it's nice having it all in the ecu.The leash electronics bump box is the best I've ever used.
@theholleyefiguy4 жыл бұрын
have you ever used anything else
@k20edef14 жыл бұрын
@@theholleyefiguy I've used Davis,smooth stage and tried the Holley right before I installed the Leash. I prefer the Leash. Once u fine tune the bump then u can program it to bump multiple times for one push of the button. Keeps u consistent and stops the car from rocking.Have u used the Leash one?
@theholleyefiguy4 жыл бұрын
@@k20edef1 ive used them all. when done the way i set them up they dont bump, the creep. you hold the button and it slides into the second bulb. it also never has to be adjusted for leaving on more power or less.
@teamdrama62514 жыл бұрын
I like this dictator style teaching we need more of it in this world. Lmao see the problem we have is everyone wants instant gratification and they wont read the instructions. Lol it's not that difficult. At least that's my opinion. Read people read lol
@scrappyclappedoutfoxbody41743 жыл бұрын
God I enjoyed this one lol.
@88_turbo_fox732 жыл бұрын
Thanks bud
@hotroder1053 жыл бұрын
Devin i got my new brake setup today exactly as you show but im having a strange issue. If i set the duty cycle on the bump above 72% it will not pulse the transbrake. Do you have any ideas on this?
@bigblock406ta3 жыл бұрын
I love the sarcasm I had to pause the video so I could didn’t miss any thing. But I have terminator and use PWM out put and tie it to my TPS to control a PWM to roll in on the brake on the floor it’s 100% duty and as I roll off it starts to decrease till the car rolled forward then when I want to stop I push it to the floor agen and I’m staged.
@momentummotorsports61373 ай бұрын
Great video i have the msd ssr that has 4 outputs pos or neg triggered will that work for transbrake/ bump it is pwm capable already have it so if i dont have to buy a new ssr Thanks
@yarrdayarrdayarrda3 жыл бұрын
How's your neighborhood with you testing the bump function on the cars you build? No retirees or young families I presume? Or is this in an industrial area?
@eddiebermudez8415 Жыл бұрын
Great video! I have one problem on my terminator x on inputs I only have 12v, So set my trans button to 12v and bump button 12v because. It doesn't give me the option for 20v. Can I set both to 12v and still work?
@opngarage87772 жыл бұрын
if i have the terminator, regarding the (PWM -) coming from the SSR, should i hook it up to one the outputs and give it ground activation demand from the PCM?
@JamesSmith-zk7ck2 жыл бұрын
Can you use the 20v in the canbus expansion with the terminator x?
@AWD_DSM_FTW3 жыл бұрын
I fuckin' like this guy
@RickMarshall-zf6hc7 ай бұрын
Use a pre wired Ls harness what’s best way to get the 12v and 20v input pulled?
@MustangCrazyMan722 жыл бұрын
Great video Devin! I followed your instructions to a T but I think I'm ahead of myself a little. I'm running the HP ecu. I set rev limiter #1 for launch RPM but where do I assign it to inputs....staging input #1 or staging input #2?
@movingpartsgarage50842 жыл бұрын
How would this work with a Jakes D1 Transbrake in an 4L80e? Any help would be greatly appreciated
@BAMotorsports4 жыл бұрын
So with this method do you not need to add in the 554-128 Module ? I know your older video you had it in there but that was a few years ago. Thanks for all the videos
@theholleyefiguy4 жыл бұрын
No not with this method . Like I stated in this video and countless other times. The old video was how to ADD bump to an existing t brake install
@BAMotorsports4 жыл бұрын
@@theholleyefiguy ok was just double checking. I appreciate ya ;)
@tillman404 жыл бұрын
Like Patton with his troops
@sneakymikels14 жыл бұрын
New sub here from ls nasty!
@lsxtmt49104 жыл бұрын
You could have used a leash elecktronicks relay since you talked me into replacing all the junk ones I had with leash.Now if you can get Jon Dok to watch your vids he wont be calling you with noob questions.
@TheAkstewie10 ай бұрын
Could I just use the MSD P#75643-HC solid state relay with multi channels and dedicate a channel to the trans brake? You can control the channel with a ground or a 12v source...
@scottmitchell54033 жыл бұрын
I would like to use a delay box and have bump ....... can this be done ?
@vermontate69973 жыл бұрын
Is there a way to make this work if I only have one boost solenoid
@jderry19933 жыл бұрын
Have you looked into the MSD solid-state relay block? Any reason it would not work the same way if PWM ground controlled?
@theholleyefiguy3 жыл бұрын
the new high current model works well for this
@ronalddrummond4580 Жыл бұрын
Can I run 2 step and line lock using the same button on terminator x?
@jasonstrester Жыл бұрын
I dont have “bump button” on my Y Axis drop down to setup PWM for t brake
@homelessvet29002 жыл бұрын
Hey Devin, I see WHY you used the 20v input for the bump button. But I was wondering, would it be okay to just use the 12v input. Let me explain why I ask. I use a scramble button (I know you hate that) and I only have the option of assigning that button 12v or ground. My scramble button and my bump button use the same button on my steering wheel as I've used boost leash in the past but am now switching to holley. Could I not just use a 12v input and split it at 6.5 is 85%, etc. Not sure if it matters but I run a 16v battery with an alternator. Thanks for the content man!
@homelessvet29002 жыл бұрын
For anyone else who had this question. I figured out why you need the 20V input, you can not display a 12v input on the PWM x or y axis table. Guess I'm not running a scramble button anymore.
@theholleyefiguy2 жыл бұрын
Use an advanced table to make a scramble with that same 20 volt input. I am positive I made a video on this
@homelessvet29002 жыл бұрын
@@theholleyefiguy perfect, thanks man!
@TeeeRoyJenkins2 жыл бұрын
Probably a dumb question, but if you use the optional button power 12v do you tie the orange wire of the SSR into that off the ECU instead of battery power
@theholleyefiguy2 жыл бұрын
No def not
@yarrdayarrdayarrda4 жыл бұрын
No soup for you!!!!
@lesgray33554 жыл бұрын
Holy shit I can’t stop laughing at this intro!! Lol 😂
@theholleyefiguy4 жыл бұрын
Lol I was just trying to be more of myself
@evanlindsay61383 жыл бұрын
@@theholleyefiguy do you have an email one can reach you at?
@juandenny3198 Жыл бұрын
How to set up the 12volt out from ecu?
@chrisanaya87034 жыл бұрын
Professor when will the next class be so I can attend.
@TechMarcB Жыл бұрын
How would you go about using the bump button as the scramble afterwards. I’d be Leary about using the trans brake button even with the wheel speed qualifiers.
@theholleyefiguy Жыл бұрын
Advanced table. I made a video on it. Look thru my channel and you'll find it
@TechMarcB Жыл бұрын
@@theholleyefiguy I figured it out like 10 minutes after making this comment. Forgot to delete it. Thanks for all your videos man, massive help.
@DuoBart0n4 жыл бұрын
So would you say the Holley 554-128 isn’t necessary then?
@Gillettesgarage2 жыл бұрын
I was wondering if he could do a video explaining why not to use 554-128
@sikryd Жыл бұрын
Hahahha... Dude! Cousins brothers uncle, wuhan china parts. You crack me up. You're a funny F'er.
@payneracing1612 жыл бұрын
I wired everything up this way and bump button isn't working how can i test to see of ive got something crossed up or not right in the ecu
@damnitdang Жыл бұрын
You said in the other video that Chinese relay was probably better than those relay?
@Jvcomet4 жыл бұрын
You can’t have any pudding if ya don’t watch the whole video😤. Lol
@daviddunham83773 жыл бұрын
Im running the terminator x max, 4l80e trans with a Jakes D1 trans brake. Will the term x wiring work for my set up? I won't be adding the bump function.
@kurt75703 жыл бұрын
did you have any luck ? im about to hook up a jakes d1 trans brake
@seagate402 жыл бұрын
I was wondering the same thing with jakes d3 without bump how to wire it
@SilentNight16474 жыл бұрын
I love the relay rant, I do industrial control work for a living and I just cringe every time I open a cabinet and see no name buttons and switches. Just buy the good stuff one time and be done with it.
@juandenny3198 Жыл бұрын
Will this be ok if brake is needed for reverse? Or is there anything elese I need to do? Thanks!
@theholleyefiguy Жыл бұрын
yes thats fine thats how all the pro brakes work
@juandenny3198 Жыл бұрын
@@theholleyefiguy thanks. !!!!
@terrancedaves7514 Жыл бұрын
No need for 554-128?
@scottbennett35482 жыл бұрын
This is my first time ever messing with any kind of tuning but I have everything wired up just like the diagram and I’m setting it up in the software, where do I land the staging output? Does it land with the bump output or am I missing wiring something else as a separate output? It won’t let me pin map it with the bump output..
@YaM0MsAh032 жыл бұрын
Same question I have. I don't understand how this enables the trans brake as well as the bump function when doing it on a TermX or doing V5 staging since you cant pin 2 outputs together. The way I understand it the TB would only ever be pulsed and never fully set, unless im missing something obvious im kinda stuck there.
@YaM0MsAh032 жыл бұрын
kzbin.info/www/bejne/aqDJfYqggauJpZo 6:30 - 8:30 in this video explained it a little better
@scottbennett35482 жыл бұрын
@@YaM0MsAh03 it’s just one output, the bump input just pulses the transbrake.
@scottbennett35482 жыл бұрын
@@YaM0MsAh03 when you setup staging it automatically creates the output and you just map it to whatever pin your transbrake is wired to…then the two inputs (brake/bump) control the one output. Transbrake button applies the solenoid and the bump button pulses the solenoid
@scottbennett35482 жыл бұрын
@@YaM0MsAh03 I think lol I don’t have my computer in front of me or I could walk you through it
@johnolson74303 жыл бұрын
I can just hear the phone calls.... i cant find a pink bump button with a purple and green wire....
@jamesaustin40444 жыл бұрын
Don't laugh, you'll mess up the seriousness of the instruction!!!
@mugendrewable3 жыл бұрын
Lol! Certified you tube mechanic, hahahhahaha
@fishingman2112 жыл бұрын
Set up mine just like this and had no luck with it being functional
@theholleyefiguy2 жыл бұрын
sounds like you screwed something up
@fishingman2112 жыл бұрын
Bad soild state relay😑
@StreetRacingLifeStyle3 жыл бұрын
I got 1 question.....🤣
@charleshayes17713 жыл бұрын
Love the videos! But for the non electrical idiots build a training wiring board showing everything in real world
@billandi-ll2fg Жыл бұрын
hello Devin how can i contact you?
@theholleyefiguy Жыл бұрын
Devin@hcrinnovations.com
@BULPIN8474 жыл бұрын
Hey Devin did you grow up with nuns in a Catholic School like John Belushi and Dan Aykroyd in The Blues Brothers