Tesla Model Y: Adro prepreg dry carbon full body kit install

[@KimboDogg07]

Not adding screws is crazy work.. Dude gonna hit 80mph and proceed to watch his front lip and side skirts getting run over by every car on the highway.. 😂

[@TeslaDIY]

2 years, 30k miles driven, still on the car, but definitely better off putting some screws for extra security measure.

[@Somejace]

Ordered this kit a month ago, should be receiving it soon. Seems like a pretty simple process for install. Looks good man.

[@jamesalquitela7617]

Awesome car you really made it your own with personal touches. I wanna get the same aero kit but they don’t have it in matte.

[@SharkBaitR56]

Congrats on the sponsorship Perry. Well deserved man! Car looks great!

[@TeslaDIY]

Thanks Darren, really appreciate it!

[@wabawa]

Another great vid Perry! Thanks for sharing the closeup and congrats on the partnership; you and CJ are among the best DIY accessory ambassadors!

[@TeslaDIY]

Haha thanks Vinh!

[@SahanRavinder]

Thanks for sharing your installation tips/techniques. Looks awesome!!!

[@dadsskateshop9733]

Did the side skirts only have tape on the one edge under the door? What about the edge under the car

[@TeslaDIY]

They did provide bolts to go on the bottom as well in addition to the double sided tape on all the outer edges.

[@mathiaslunde7927]

Looks freaking great, just ordered a fake one on Aliexpress for my model 3 performance . excited to see what the quality is gonna be😂

[@KevinNguyen-zn4vv]

If you have the performance model, be prepared to park on the sidestreet because you'll eventually scrape the wheels and everything around it going up the driveway. Autopark parks like a feet away from the curb because it knows the wheels will curb-rash if it makes any tight maneuver. I had a similar problem with the slim 20's on my i3.

[@Pied2022]

Nice meeting you at feng cha in Newark. Awesome car, nice work.

[@TeslaDIY]

Haha thanks bro! I gave you a thumb up, nice stance and wheel setup!

[@abccorals9418]

As far as double sided tape alone without any others adhesive or screw. It can hold for a few years however in time the tape will get hard and brittle so it will not hold the kits. Tesla acceleration produce a lot of downforce and the front diffuser will be compromised.

[@RoganRicheart]

You didn't show what you did the primer.

[@tom1stgen]

This kit is one of the best I have seen so far on the Y. Is it true that Tesla will not put your car on the lift if you have side skirts installed? also is your car on lower suspension?

[@TeslaDIY]

Hello, my car is on air suspension, it can raises up 1-3" higher than factory spec, or lower to the ground with a push of a button ( you can check out my other video for that setup). as far as taking it to Tesla for service, with my air suspension, all i have to do is air it up (raise the car's ride height) and i have never had any issue with them working on it, although i normally perform my own maintenance/repair

[@JustStandardLife]

sad that that rear diffuser doesnt work with the tow hitch, looks amazing!

[@StevenWongswfitness]

How did you remove the stock rear spoiler? Or did u just install the new one on top of it?

[@TeslaDIY]

fishing line, dental floss, heat gun, adhesive remover wheel

[@deef3]

That kit looks so good.

[@Anders0nic]

A very thorough diy video. Great job old friend.

[@TeslaDIY]

Thank you trooper

[@naradaAye]

Bought the rear diffuser & have been sitting on it. Fear of the unknown drilling into the factory plastic. Any idea whats on the other side?

[@TeslaDIY]

I didn’t remove my bumper, so I never knew but I’m pretty sure it’s hollow atleast for couple inches, you don’t need to drill too far in and even with rivnut, it’s only half an inch in at most

[@naradaAye]

@Tesla DIY Thank you. Nice car too!

[@TeslaDIY]

@@naradaAye thanks bro, yours will just be as nice if not nicer once you put that diffuser on

[@naradaAye]

Finally, I installed the rear. Complements all the time. Thanks for your guidance!

[@PrinceKashez9]

Man they gotta use t something about those plastic side quarters panels! There has to be a wide body kit that'll clip to that and mold to the body at the same time so no cutting needed

[@biskero]

any range efficiency increase?

[@TeslaDIY]

don't know, don't really care about range

[@biskero]

@@TeslaDIY I understand but it would be cool to know! thx

[@Fminusdaboss]

Hope they come out with a non glossy finish

[@TeslaDIY]

They did bring out non glossy version at the tesla takeover event last week. The current batch are still prepreg dry carbon, so out of the mold, they are already matte finish

[@lakaiinhd]

Yesss!!! Had to comment and like before watching haha!🔥🤙🏽

[@realestate_life]

Hey, got a question for you did you lower the vehicle at all?

[@TeslaDIY]

Check out my other videos, i have done 4 different suspension video on this channel, from lowering springs to coilovers, to 2 different air suspension installs

[@PrinceKashez9]

Basket ball to hold the diffuser! 🔥🫡🫡🫡

[@rajenbhatt7753]

Hi, Thank you for creating a video and sharing the information. I have one question for you, at 11:27 minutes in the video i see that you have rear hitch window (tesla installed, i guess like i have) on your tesla. I did not see any window cut out into your rear carbon fiber piece and i am not sure if now that hitch is accessible to you or not. I have not installed that rear piece just for that reason. Let me know what situation do you have. Thanks.

[@TeslaDIY]

Hello, you're welcome and thank you as well for your support! Unfortunately, no, you lose access to the tow hitch by covering it, however i believe Adro just released their V2 kit which I think will have access to tow hitch. I might carefully cut out an opening to regain access to my tow hitch in the future, and make a nice carbon cover to cover it when tow hitch is not used.

[@EnforcerMan]

Thanks for the video mate. Do you have any hook up for a discount code? It’s running about $5k now. Thank you

[@TeslaDIY]

I would wait for their wet carbon version (what they currently sell are the dry carbon which is a lot more involved and expensive to make but top notch quality) the wet carbon version will come with version 2 diffuser with tow hitch access and will be $4000 shipped

[@TeslaDIY]

And will be available later at the end of this year I was told

[@TeslaDIY]

As far as discount, I know they offered to the “Ruined Tesla” group, not sure if they have discount for me to offer to the public

[@Firehuntah]

Bit late seeing this video but awesome job again! 👏 The kit looks amazing and install looked like a breeze. Really great fitment indeed. Wasn't the case with my Artisan kit and had to cheat a little bit to get it to fit properly. 😅 I guess if I ever decide to go with something different, I should look into Adro as well. 👀 Btw, those Suvneer skid guards, how thick are they? I currently use Sliplo on mine but they're pretty thick and quite visible. If these are narrower I might switch over to them. I also prefer their more matte look, the Sliplo are gloss which doesn't combine well with my satin kit.

[@wdeng90]

Once I saw that you were featured on their IG, I had to check for your install video lol. I asked them if the quick bandit plate holder would fit with that front lip middle fin in the way and they said it wouldn’t. Do you have any suggestions, or what do you do for a front plate? Thanks and great video as always!

[@TeslaDIY]

Haha I don’t have one but I can get a hold of one and test it out, dm me on ig so I know who to follow up to 😉

[@wwjohn74]

Great video. I order my model y and definitely want to order from them. Looks great!

[@TeslaDIY]

Thank you!

[@GODMODEPLUS]

Ordered this kit on aliexpress for under $1.8k love it

[@linsean254]

Rear diffuser requires replacement or direct overlay like the OP?

[@Disto97]

link?

[@cyprianskiba8768]

Side aero is my favorite

[@DDB-np1jp]

Looks very good, but I would not do the side skirts like that. It would look better with the small wing just like the front lip, but most important, the side skirts this kit comes with come out a lot form the body. Most people will, without thinking, put their foot there to help going in and out of the car. And if you have kids, forget it, they will jump on it if they can. and you know what that means, the side skirts will last yo just a few weeks before they fall apart.

[@kushagrasingh7731]

Can the front bumper be removed clean ?

[@sanaeastern]

Hey boss what's the size of your rims

[@shelbyrodriguez560]

Problem I see is carbon is covering the tow hook area.

[@davincc]

How much ground clearance did you lose?

[@TeslaDIY]

Not a whole lot to be honest, but it’s hard for me to tell you since I’m on bags and i had another front spoiler (revozport front, wayyyy lower) Best to check out some of the guys who’s on stock suspension, you can compare with another stock car

[@RafalDelano]

I have been watching for this company to release this product. Im VERY disappointed that they made the kit look so much better on the Y and didnt put as much effort in the model 3 kit ;-( and man this kit is extremely expensive. Great video though bro! Im trying to find sponsors for my P3D- whats the secret? (Also, congrats on your sponsorship!!)

[@TeslaDIY]

Thanks bro

[@MegaGyalis]

Thought I was the only one who noticed this!! The kit looks a lot better for model Y. Especially the front piece

[@RafalDelano]

@@MegaGyalis No, Im with ya. I feel they missed an opportunity here.. far less model Y owners mod the soccer mom car…more of us 3 owners mod our cars and lets not even talk about the price theyre asking for the kit.

[@franciscob.2219]

Does the rear diffuser interfere with the tesla sensor?

[@TeslaDIY]

no, the sensors are above the diffuser and i have driven many miles with this kit already, no issues

[@rcboosted]

Any possibility of seeing the difference in aerodynamic efficiency differences?

[@TeslaDIY]

Not with the way I drive, but they do have a wind tunnel study showing 4.4% reduction in drag and downforce increase of 727N

[@shelbyrodriguez560]

Supposed to remove rear diffuser to put new diffuser on

[@yatesbenjamin]

Did you have to measure out the ends for the rear spoiler to make sure it fits correctly? And did you put extra tape on it for 24-48 hrs to ensure it fits well? Also any issues with the rear spoiler months later? Thank you.

[@TeslaDIY]

I did some quick measurement + eyeballing, its pretty easy to align, i just used the tape that was already on the spoiler without any extra, or maybe you mean like some painters tape to hold it down for the next 24-48 hours? if so, i also didnt do that. few trips from norcal to socal, trip to sema las vegas and back to norcal, not a single issue, holds up just fine

[@yatesbenjamin]

@@TeslaDIY thank you so much. I was looking at a friend's. It didn't go around the trunk lip like the OEM spoiler. Rather it seemed to sit on top of the lip/bent part. Even he was surprised as most spoilers seem to go over the trunk lip and hug it. Is that true? Just making sure it's being placed correctly.

[@TeslaDIY]

@@yatesbenjamin i believe the OEM spoiler gets mounted on the vertical face of the trunk (where the tesla logo goes) and sit flush at the top flat surface of the trunk. Adro spoiler gets mounted on the top flat surface and stops right before the bend on to the vertical part of the trunk

[@yatesbenjamin]

@@TeslaDIY Gotcha. Yup that makes sense. Thank you once again. 🙏🏼

[@nickkogu6406]

Just a quick question I already did full car ppf xpell matte . I guess I can’t use 3m to ppf ?

[@TeslaDIY]

I have ppf a well, you’ll be fine, ceramic coating however, you might have challenge getting it to adhere, but even then you should be fine, you can buff the bonding surface with compound if you have ceramic coating in those area, check with your detailed/ppf shop howver

[@nickkogu6406]

@@TeslaDIY thanks :)

[@dnz947]

I love the body kit😍 i hope they sell individual pieces...by the way what brand is your rivnut tool? what size of rivets did you used on the rear diffuser?

[@TeslaDIY]

Thanks, the linkto the Rivnut tool is in the video description, i used M4 nuts and bolts i believe, I don't remember exactly

[@dnz947]

thanks..👍

[@oncerockin]

Looks awesome. I wish they sold individual pieces of this kit now instead of just the bundle. What wheels are those?

[@TeslaDIY]

thanks, they are Rotiform NEK from my model 3

[@wdeng90]

They said on their IG comments that the pieces will be sold individually in the fall! I just want their front spoiler (for now).

[@oncerockin]

@@wdeng90 Can't wait!

[@Watt_Ihr_Volt]

Looks cool but when screwing into the metal body parts you forfeit the 12yr rust guarantee I guess...because at least in the instruction pdf they show that you should drill 12(!) screws into the parts on the sides each

[@TeslaDIY]

I didn’t use screws for the sides

[@partydelcarmen]

Looks great. I'll pass for $6k though.

[@ChimChimIsDead]

Awesome! I like your hair!

[@TeslaDIY]

Hahah thanks, also a DIY

[@ericferrer8149]

Do you have a discount code to use when ordering full kit ?

[@TeslaDIY]

Unfortunately I don’t 🥲

[@sp6190]

Awesome video!

[@TeslaDIY]

thank you!

[@MegaGyalis]

Wanted this for model 3 but it doesn’t look the same. Doesn’t look as good.

[@zevcentric]

And apparently i wasn’t part of the iykyk club. #rishiespec is even more salt than pepper now. 😢

[@EdwinCaucu]

Yo yo… I was like… I know this dude!!!! LoL

[@TeslaDIY]

Lol what’s up Edwin, finally made the move?

[@melvinowens2687]

Sweet whip dog

[@TeslaDIY]

Thank you brother

[@NamNguyen-xz2ec]

what size drill bit did you use?

[@TeslaDIY]

Sorry I don’t remember, but google says 23/64 bits for m6 nutsert

[@slapitandtapit]

Nice but super pricey for just the front lip.

[@TeslaDIY]

I maybe priced higher than other options out there, but consider the quality and fitment, it really isnt bad, keep in mine, these are made in prepreg dry carbon, not the wet lay heavier carbon fiber thats more commonly found. Do you need dry carbon? probably not, but it sure is stronger and lighter

[@slapitandtapit]

@@TeslaDIY glad they have that payment plans option 😭

[@keno6391]

DAMN BRO!

[@ABsolutely_Channel]

I think that one so expensive

[@vikdiesel7978]

Best Bodykit for Tesla Model 3 from TSK Tesla Service Kiev Ukraine/USA

[@gizmoffm]

Always worry about those body kits mess up carefully designed aerodynamics

[@Gaming.Labs_GL]

I messaged on IG, hopefully he replied. LOL

[@TeslaDIY]

Didn't get any message from you on IG

[@paulsmart2078]

$6k dam lol

[@didi5778]

Not as advertised. The kit doesn’t fit as shown in the video. Especially diffuser. No rivnuts we’re included and customer service doesn’t exist. The 3m tape won’t hold diffuser -once you pay 5k for this kit, you are on your own.

[@TeslaDIY]

Not true at all, I explained about how I had aftermarket rear bumper reflectors which was why I had an issue fitting the diffuser at first, even then it was a very easy fix and fitted on perfectly. the entire kit is held on with the 3M double sided tape preinstalled on the back of every panels, I decided to not use the 3m double sided tape on the diffuser just because i want easier removal and everything has held on fine for almost a year now, driven thousands of miles including my most recent trip to SEMA vegas from the bay area CA. Give me your contact and i will reach out to Adro for you

[@barryblack7384]

Those wheels are absolute trash , whatever you do to the car, it will not help.

[@chupscola9198]

Wait, except for the diffuser, all these body kit is being held only by a sticker? Oh wow. Looks awesome tho….thinking about getting it.

[@TeslaDIY]

Sticker is a bit cheap to call it, more like industrial automotive double sided tape, but it holds on just fine, been 2 years and still holding up

[@chupscola9198]

@@TeslaDIY ok industrial it is, still scared tho lol. I would probably put a couple of screws on each of the side kit and front spoiler. It really looks great except when I looked at Adro website it is very expensive. Been watching bodykits youtube vids lately, thinking about getting one for my performance Y. Thanks for this awesome video.

[@jhapcalidude]

What's up with your rim color dude ?😅😅😅 Is that your wife's favorite lipstick or underwear color lol 😂😂😂 it was ok until I saw those rims 😂😂😂

[@TeslaDIY]

It is indeed my wife's car and it is her favorite color, i got these wheels used in this color and was a spare set of wheels on my Model 3 so i reserved them for when i start building her car. Its a white car, any color wheels would work

[@jamesalquitela7617]

Awesome car you really made it your own with personal touches. I wanna get the same aero kit but they don’t have it in matte.

[@TeslaDIY]

They are actually matte finish out of the mold because of the prypreg carbon process, but they spray clear coat to protect the finish from UV, I’m sure you can get some matte clear coat like the ones from spraymax 2k, to make them matte finish

[@ayyooKenny]

Do you know if mud flaps will fit with the rear diffuser?

[@tonec-]

Im not sure about his, but my mud flaps still fit back on after I installed my diffuser bumper on. But mine is a different diffuser from RPM Tesla and it’s the Viento diffuser for my Model Y. Hope that helps.