Today we test fit the chassis & body | VW Beetle Restoration This 1965 Beetle was forgotten in a field in South Georgia for 40 years. Let's bring it back to life. ctmoog
Пікірлер: 226
@stephenhenion830411 ай бұрын
Fantastic job!! I remember watching you bring this Dub home!!! Have to say how much I admire your shop! Top notch space! ....
@CTmoog11 ай бұрын
Thank you! Yes, it's been just over a year. It's my brother's shop. It's a great space to work.
@elfenmagix817311 ай бұрын
I seen a lot of people use contact cement to tack down the rubber seal to the floor plan before putting the body on. Though it is an extra step, and it takes a day or so for the contact cement to set in, it seems to work for many out there. You did an excellent job with this bug.
@maverick417711 ай бұрын
Bonding the gasket to the floor pan is the easiest way, with something like evo stick or similar
@PapiDoesIt11 ай бұрын
Hot glue in a few key places works too.
@GregsGarage11 ай бұрын
Starting to look like a car again CT! I agree with you - headliner BEFORE windshield! Also, it helps to get the dash in place as well.
@CTmoog11 ай бұрын
Thanks Greg!😎
@worthmor514611 ай бұрын
Looks good the way it is. I wouldn't lower it. Just repaint the wheels, put some caps and you're good to go!
@vayabroder72911 ай бұрын
I would even leave the wheels with the patina.
@andreasgraube437611 ай бұрын
Original wheels looks way better than anything else on a VW bug or bus. It looks either cheap or too fancy with other rims.
@demRucks11 ай бұрын
I agree. Keep the rims and I personally don’t get the lowering thing. Maybe I’m an old guy and value comfort over looks.
@snowdogs5911 ай бұрын
I agree, don’t lower. The original patina look will make this one stand out.
@CTmoog11 ай бұрын
Well it's going to stay this way for a while! =) It's stating to grow on me.
@abderrahim695411 ай бұрын
كل شيئ بالعمل والجد والمثابرة رائع مثل هذا العمل. يقول الله سبحانه وتعالى "اعملوا فسيرى الله عملكم ورسوله والمؤمنون" وفقكم الله واصلوا هذا مهم جدا تحياتي من مدينة الحسيمة المغرب
@leonardo5711 ай бұрын
Yes CT , it looks like a real beetle again. Great work 👍👍
@CTmoog11 ай бұрын
Thanks buddy 👍
@michaelhill284411 ай бұрын
I wouldn't leave the tank rusty. Rust never sleeps. It will spread to internals.
@jrlopez45859 ай бұрын
Well watching you work gives me the motivation to continue ... I just got a 1966 VW Beetle myself yesterday Nov 4/23 I took all the interior out, engine does not turns on and it has not been driven for 5 years, a customer of mine even gave me an engine with lots of extra parts, so this is going to be an experience cause I'm a tool man and not an active mechanic nor a body man as well. I'm almost retired and at 66 years young doing all this work together with my son it's going to be an adventure. Today I pressured washed the whole bug, inside and out and to my surprise the whole floor has been "Cannibalized" with just a plain thick metal floor so yes lots of rust and wrong welds all over on both sides, it's a big, big mess ... But hopefully I'll get it done , slowly and learning daily as I progress. Thanks for your videos and hoping to continue following and learning from experts on VW Beetle's Regards
@lancenutter106711 ай бұрын
Love seeing it come together!
@dolf101011 ай бұрын
All is looking so good CT ! I like that off white /beige painting so much ! The side bars in beige looks elegant 👍 The only thing I 'd like is sanding the tank, because all looks so nice and clean inside But this is my persnal impression .
@larryoren592811 ай бұрын
On your gas tank, I'd put rubber(weather stripping) around the edges of your tank to keep it from squeaking. And replace all rubber (if you can). And you should coat the bottom of it because of all 5he weather it's going to be put through.
@CTmoog11 ай бұрын
Good tips!😎
@tomdale131311 ай бұрын
Texas, see what happens when you believe in yourself...txs for sharing
@brianw896311 ай бұрын
Glad You popped up as I am in a similar project . ( funny how that happens) Just recently rejoined the body and chassis on My 69 vert . Thought it went pretty well until I put the doors back on. Had to do some adjusting on the mounts but finally got it. Just part of process I guess. These convertibles are flex sensitive. Any way,have fun! 👍👍🇺🇸
@vayabroder72911 ай бұрын
Convertibles have some strengthening members in the heater channel area; maybe even the heater channels could be different on convertibles.
@brianw896311 ай бұрын
@@vayabroder729 Yea, they have an extra support box rail outside of the heater channels, but still have significant flex with the top not secured.
@williampropp129011 ай бұрын
I would clean up the fuel tank. Unless you can coat the rust to stop it from progressing any farther. I have a 1970 red convertible that needs some work but it runs great. Thanks for all your hard work.
@michelecrown242611 ай бұрын
Big day a long time coming. I bet you are thrilled.
@CTmoog11 ай бұрын
Yes, it's feeling pretty good.
@davidcham112911 ай бұрын
Hello CT, Work in progress ! Amazing !! Bravo from France
@SladesVWBeetle11 ай бұрын
Nicely done CT!! The seals a pain sometimes.
@richardmethot131711 ай бұрын
Great job ……. Love the patina look ……. Matt black wud look good …..
@77Slamvan11 ай бұрын
Looking good!
@CTmoog11 ай бұрын
Thanks!👍😎👍
@backyardkombi546611 ай бұрын
Looks good just like that. I’d be tempted to buff out what’s left of the paint and rub some boiled Lin seed oil or some other similar stuff into the rusted areas. Mike FN probably knows the best approach. Fun car
@robj270411 ай бұрын
Maybe something more permanent for the exterior like sanding down the raised rust, treating the metal to make a flash-rust then clear coat it.
@raycutts11 ай бұрын
Great job CT, tank is very clean inside, to preserve, you should clean up and spray externally. Can’t wait to see the fender headlight replaced and repaired. Good work keep going and don’t be too mean with the paint !
@CTmoog11 ай бұрын
Thanks 👍
@RusThompson11 ай бұрын
Looks great!
@CTmoog11 ай бұрын
Thanks 😎
@ronin177011 ай бұрын
This one is coming along great! Super work CT Appears you have learned a lot in last few years.!!!
@CTmoog11 ай бұрын
Thanks buddy 👍
@e.mirach11 ай бұрын
Loving this VW series
@CTmoog11 ай бұрын
😎😎😎
@demRucks11 ай бұрын
Loving this build. Coming along really nice. I would paint the dash and make the interior look perfect while maintaining the exterior patina. I’ve seen a few like that and personally they look really cool.
@CTmoog11 ай бұрын
I might do that! =) Thank you
@shrikantsarsar11 ай бұрын
Hi CT Its Looking Very Nice Wating For The Car Test Drive And The Fuel Tank Looks Great Condition Wating For The Next Video 👌👌👍
@andersaxelsson219611 ай бұрын
I think that the wheels that you have on at the moment are nice
@rasher100011 ай бұрын
All your hard work is paying off ct, she is starting to look like a beetle again, Nice, keep the vids coming. 👍👏🐞
@mistermoptser11 ай бұрын
Loving it. Great work. I'd buy it from you if I lived in the USA.
@mikebroadhead987511 ай бұрын
I don't know if you have given any thought to the finish for the car yet, but if you have not and plan to keep the patina on the car, a product I have seen used on a few other channels is something called pappy's patina, its a wipe on clear that protects the original finish. Another one comes from vice grip garage called shine juice. Looking great and glad to see it all coming together!
@michaelpung412110 ай бұрын
Nice job in spite of all of the expert advice! Been fun watching you learn along with the rest of us.
@joerangel61111 ай бұрын
CT Good morning This video is so wondetful, that I almost may feel the thrill with this stage. I just might Say "take it easy", and think about it again It is a Great video
@the63bug82811 ай бұрын
Yay back to the vw
@dgeo039210 ай бұрын
Geez. You make it look so easy!!
@kennypool11 ай бұрын
Looking good 😊
@CTmoog11 ай бұрын
Thank you! 😊
@losebjughashvili846511 ай бұрын
That’s a beauty sir.
@joemartino697611 ай бұрын
Great stuff!
@mohamedchik269017 күн бұрын
Memang sudah cantik sangat. Yang ada karat tu memang boleh di kikis dengan kertas pasir. Jika sudah tiada yang tidak rata boleh sahaja tutup dengan semen kereta. Tapi, saya nampak sudah cantik sangat. Bagus benar tukang membena semula kereta ini
@robertvargas761711 ай бұрын
I love these videos, I'm rebuilding a 74 bug of my own and these videos are a tone of help... you should test that sending units float seeing as it's plastic and could have holes from age and the continuity of the sender to see if it's sending a signal...
@CTmoog11 ай бұрын
Great idea👍 good luck on your 74! Thank you😎
@johnc.fonseca896111 ай бұрын
Great job CT.very good
@francoisbouchard60210 ай бұрын
Good.job. cool car VW congratulations Nice job😄👍👍👏👏👏
@rogeriofernandes531511 ай бұрын
Ótimo trabalho, parabéns CT. Sou do Brasil e aqui tem muitos fusca. Observei que vcs chamam de besouro, aqui pra nois somente os anos de 74 e 75 saíram a série especial chamada besouro com motor 1.600 e alguns acessórios a mais que os comuns. Vc está de parabéns pelo conteúdo do vídeo e pelo seu trabalho
@perfeicaodaantiguidade471011 ай бұрын
Parabéns o fusca muito top meu amigo
@hardcorvancour11 ай бұрын
You've come so far I love your videos 😊
@CTmoog11 ай бұрын
Thank you! =)
@laroark503610 ай бұрын
That tank was perfect
@szeglowskip210 ай бұрын
Everything is looking great! I’m hoping to start a big build myself here very soon
@bradkay121010 ай бұрын
Looking great man awesome job
@vayabroder72911 ай бұрын
Looking and lining up fantastically! All your hard work in aligning things carefully has paid off. I hope you didn’t forget the two rubber bushings for the body on the rear shock towers. West Coast Metric has all the rubber doodads for good prices and great quality. Re the height it will settle lower once you install the motor and drive it a bit. I would keep the ride stock and the original wheels and hubcaps to stay with the patina theme. You can find a new headlight bucket just like the Duckman installed on a Super Beetle.
@Intellivision7811 ай бұрын
Damn it boy! You are amazing!! Greetings from Sweden!
@CTmoog11 ай бұрын
I appreciate that my friend! =)
@Intellivision7811 ай бұрын
No, the appreciate is all om my behalf.
@adikaarda693910 ай бұрын
i cant believe you actually almost finished a restoration of 64 beetle after one year👍
@PapiDoesIt11 ай бұрын
It's come a long way! Looking good. At this point I'd be really tempted to do the rest of the body work and paint it rather than leaving the patina. I might even go so far as to make a Herbie.
@mikemuller437611 ай бұрын
I agree...paint it
@jeffschrandt-ku5eg11 ай бұрын
Fantastic job looking forward to seeing the future videos.
@franciscogalvez92413 ай бұрын
That's great my friend. Probably you got a job for me I would like to learn how to do that. That is amazing.
@michaelcaradonna934710 ай бұрын
Looks great CT !
@tracyyonka35837 ай бұрын
Looks really good you did a good job
@surindersandhi39243 ай бұрын
Hi My Dear Friend Very Great Job ❤❤❤❤❤
@gregmuon11 ай бұрын
It's almost looking like a car! Well done. So much progress has been made since the days of Rusty. 👍 While I'm not expert, I did learn to drive in an old Beetle, and I'm pretty sure the chassis is sitting up way too high. IIRC they had around 2" clearance to the fender, maybe a bit more.
@d-anger-noodle11 ай бұрын
actually really like the almond color for a rattle can paint a spray adhesive would've helped with the rubber seals to keep them in place
@wellingtonrosa415711 ай бұрын
Eita está quase pronto, ficando muito lindo! 🇧🇷🇧🇷🇧🇷🇧🇷🇧🇷
@CTmoog11 ай бұрын
😎😎😎
@stephenhennessy242010 ай бұрын
Looking great, I would paint the tank personally
@robertclay100711 ай бұрын
I really like the almond color. You should let go of the patina and rattle can it in almond. The almond color looks very good next to the running board.
@CTmoog11 ай бұрын
Yes, it looks pretty sweet! =) Thank you!
@terrybotts210910 ай бұрын
can't wait to see this baby rolling down the road.
@fredsons11 ай бұрын
Yeah….slo mo is killer. The acting there at the end….nice!
@anibalbabilonia186711 ай бұрын
Man she’s looking good CT.! I can believe how great that gas tank looks inside! I would say lower the front a few more inches. And boy she’s gonna look sweet!👌🥰👍 lol 😂 by the way! I was browsing on the video through your garage! And I noticed on top of that steel locker you have a 50-60s Nylint Michigan crane! I have one exactly like yours in my garage shelf!👌😂👍
@tunerrestorations11 ай бұрын
Last one I did we used windshield sealant to glue the seal onto the chassis in the right shape and place. You can also use a loop of dental floss though the hole in the seal lift it a tiny bit the pull on the floss to move the seal at each bolt hole until it lines up.
@julianroberts711611 ай бұрын
Hey mate you're doing so well, you should be so pleased with yourself. Well done! 1.You asked about the front - it is quite high at the moment, but will settle down when you get things like the tank fitted. Get the car going first and then thing about lowering it further. Isn't your front beam adjustable? 2.Yes there's a lot of play in the steering, it may need a new steering box. 3. In my humble personal opinion the perfect new running boards look quite odd next to the rusty patina panels. It's your car to play with, but I'd think about dirtying up that shiny chrome strip if it were mine. Likewise the fuel tank - a good coat of something like Hammerite on the bottom will protect it (nobody can see it anyway), and as for the top - inside your trunk is all new and painted, so I think a dirty old fuel tank would look wrong. If it were me, I'd give it a good sanding down to clean and smooth it then paint it satin black. 4. There's a big rectangular gasket to go between the fuel tank and the body. 5. You can get a headlight bowl (bucket?) as a separate item, new. Just weld it into your old fender.
@richardhill486211 ай бұрын
Before you take the body off, you might do the work to the doors and fenders to get a better match body and paint. I think you have something to be proud of and think it would be cool to drive it to the up coming car show.
@fernandodossantosmusica11 ай бұрын
congrats man ...amazing
@jeffbannon134511 ай бұрын
CT, you may want to paint the drums before they rust. Granted you may want them to blend with the patina…
@philipsdefreville613811 ай бұрын
Hey CT, looking sweet! I kind of like how it looks with just the original patina, no need to over simulate with red paint, IMHO.
@jugoentuculo11 ай бұрын
Daleee Carlos Torres saludos desde Parma Italia, vamos que este puede ser el primer auto que termines.
@joserivera652311 ай бұрын
Looks nice paint fenders under neat in white keep outside patina and crome Hudson caps and ready to hit the road
@saadghunaimat2161Ай бұрын
Great job
@wolfgangschmidtke802311 ай бұрын
Hallo tolle Bilder aus USA und das von deutschen Autos VW Porsche 914 Karmann und so weiter und tschüss aus Düsseldorf 🇩🇪👍👍🤵🏻
@brettsfishingdiaries11 ай бұрын
a spray adhesive that carpet fitters use would of been ideal to keep that body seal in place bud
@ATOMSHAMRADIO11 ай бұрын
DAM CT. THAT LOOKS SWEET GREAT WORK👍
@CTmoog11 ай бұрын
Thanks Atom! 👍
@jeffbannon134511 ай бұрын
Looks great CT. The height seems a bit excessive. Did you replace the spring plates in the front end and the torsion bars in the rear? I noticed when you put the rubber body mounts on the front end the lower mounts were perpendicular to the opening. That might prohibit the front end from sitting flat, which will affect the height and even how the doors sit. Also, is there any play in the front end if you bounce on the front suspension? Any give? Might be worth exploring if the trailing arms don’t move when you bounce on them. With the engine in the car it will be a little lower in back… but it seems just a bit high. Maybe it will settle with the body back on? Regardless just awesome.
@CTmoog11 ай бұрын
Thanks Jeff! I think I have the wrong bushes in the front. I ordered the correct ones this week
@st-qd8wg10 ай бұрын
Since you know about suspension, can I put Gas A just shocks for better support because weight on the rear and also witch shock should I put on front to ride nice and work well with whati I got a complete oem suspension.
@everydayrenaissanceman224611 ай бұрын
Looking good CT. The front and rear will settle a bit once everything is in the car and you start moving it around. get everything in the car before you start adjusting the height.
@davidmccormick105811 ай бұрын
You should clean the outside of the tank and spray rust converter on the outside of it to prevent any further rust on the gas tank!
@CTmoog11 ай бұрын
good idea!
@mickg648011 ай бұрын
Looks great. Excellent series too. Wouldn't it be best to treat the rust on the gas tank exterior with rust stabilizer at the very least? Maybe coat the bottom with Por15 or the like and coat the interior too?
@7MPhonemicEnglish10 ай бұрын
If you're certain that the steering play is not attributable to any other worn components, the steering box itself has adjustment screws to take up slack between the wormgear and roller etc.: "If none of the above faults are found, check and, if necessary, adjust the steering gearbox in the following sequence: The play between the worm and the roller; The axial play of the worm spindle; The axial play of the roller." You can find instructions online.
@anthonywright77411 ай бұрын
I wasn't expecting to wake up to Christmas morning, that thumb nail should pull in 10,000 views, Merry Christmas🎄and here's your gift Matt Armstrong 911 GT3🎁almost a quarter million views, good job.
@vwfanatic239011 ай бұрын
The trick to getting that body chassis seal exact is upholstery glue. Sorry, couldn’t watch to the end so I haven’t seen if you got it or crimped it.
@CTmoog11 ай бұрын
Thanks man! I'll pick some up this week.
@handle69011 ай бұрын
Hey CT, are you thinking about putting a finish on the patina to preserve it and stop rust spread? I love the look.
@michaelpung412110 ай бұрын
I love the look also but it's not for everyone. I'd fix that fender dent and clear it. Patina to die for.
@FoxMcCloud1200011 ай бұрын
That restoration is surely going great! The front and rear suspension seem to be too high though. There should be a space of, at least, a couple inches between the fenders and the wheels. That's my experience with my 1970 bug, at least. However, after changing that steering box, fitting the gas tank and checking the shock absorbers, you can give it a look again and adjust the front suspension, if necessary. Way to go!
@gregoryraven321311 ай бұрын
I like the build but I would definitely fix the rest of rust n holes n paint it all new
@dougstaner122010 ай бұрын
weather stripping could be seam sealed (glued) in place on frame first or fastened with self-tapping screws with thin flat washers. So many ways to do place prior to joining to body.
@stephenmayock377611 ай бұрын
If you want the gas tank to last, then you should remove the rust and paint it.
@carlostonini909311 ай бұрын
Muito bom, estou acompanhando desde o início da restauração, e torcendo pra ver ele todo pronto, tenho um ano 74.
@rogershoffner499711 ай бұрын
it has come a long way
@andersaxelsson219611 ай бұрын
Looking good ct. So the Doors need to be welded on the underside? Soon its a complete car👌🌹
@CTmoog11 ай бұрын
Yes, more work on the doors and fenders soon. Thank you! =)
@Frockdutch18 ай бұрын
To hold your weatherstripping well, use spray adhesive, also called Gorilla Snot
@David-in3sd4 ай бұрын
Use some 3M spray tack for the seal to hold it to the pan.. Sticky just enough to hold in place but easily removable if needing to replace.
@TimsWorkshopTJY11 ай бұрын
Awesome fit CT, looking forward to the door repairs. I'm sure Mike is too.
@georgeclements274211 ай бұрын
I don't know why you would leave the bottom of the fuel tank rusty even if you want to keep the patina look on the parts you can see. The bottom of the tank will not be visible and it would be only sensible to rustproof and paint it to retard further deterioration and potential leaks.
@nadenolam836811 ай бұрын
Spray some glue on seal and body, it’ll hold seal.
@Elfajah11 ай бұрын
Parker wants her bug painted haha
@CTmoog11 ай бұрын
HAHA! What color would she like it? =)
@Elfajah11 ай бұрын
😂😂
@Elfajah11 ай бұрын
Yellow and black rims
@terryraymond798410 ай бұрын
CT that is fantastic
@user-kh7xe5ut9n11 ай бұрын
Hi those nails look like carpet tacks to me. Yes looks great way to go keep it up . A magician could not have done their tricks any better than U did good job . If U want to leave the tank rusty try and sea if their is a clear rust protective spray so that it does not get any more rust , it's looking good . Latter