Adam Savage's One Day Builds: Staple Sorter and Organizer!

At the beginning of lockdown, one of Adam's first infrastructure projects was building a storage rack for his collection of staplers and nailers. That storage system gets completed today with custom organizer and sorter for 31 different types of staples that Adam keeps in rotation. This slot and tab build is one of Adam's favorite types of assemblies, and it's capped off with some very satisfying labeling!
3M Scotch-Weld Hot Melt Applicator: amzn.to/2XofZfI
Halder Supercraft deadblow hammer: amzn.to/2ZrAud6
Senco 23XSP 23 gauge micro pin nailer: amzn.to/35PqgUC
23 gauge headless pin nails: amzn.to/2PRhqQN
Shot by Adam Savage and edited by Norman Chan
Music by Jinglepunks
Join this channel to support Tested and get access to perks:
/ @tested
Disclaimer: Tested may earn an affiliate commission when you buy through the links here.
Tested Ts, stickers, mugs and more: teespring.com/...
Subscribe for more videos (and click the bell for notifications): www.youtube.com...
Twitter: / testedcom
Facebook: / testedcom
Instagram: / testedcom
Discord: / discord
Amazon Storefront: www.amazon.com/...
Savage Industries T-shirts: cottonbureau.c...
Tested is:
Adam Savage / donttrythis
Norman Chan / nchan
Joey Fameli www.joeyfameli.com
Gunther Kirsch guntherkirsch.com
Ryan Kiser / ryan.kiser
Jen Schachter www.jenschachte...
Kishore Hari / sciencequiche
Sean Charlesworth / cworthdynamics
Jeremy Williams / jerware
Kayte Sabicer / kaytesabicer
Bill Doran / chinbeard
Ariel Waldman / arielwaldman
Darrell Maloney / brokennerd
Kristen Lomasney / krystynlo
Intro bumper by Abe Dieckman
Set design by Danica Johnson / saysdanica
Set build by Asa Hillis www.asahillis.com
Thanks for watching!
#adamsavage #onedaybuilds

[@tested]

3M Scotch-Weld Hot Melt Applicator: amzn.to/2XofZfI Halder Supercraft deadblow hammer: amzn.to/2ZrAud6 Senco 23XSP 23 gauge micro pin nailer: amzn.to/35PqgUC 23 gauge headless pin nails: amzn.to/2PRhqQN Disclaimer: Tested may earn an affiliate commission when you buy through the links here.

[@Peter_Enis]

Tested SHOULD earn commission... and Mr. S..... please fill that last hole with anything.... my ocs-alarm is beeping like crazy.

[@alaskankare]

Hey Adam, love your shop set up. Do you still do commission work or is your shop now just hobby work? Thanks for your videosa

[@SNEAKYxWYZRD]

to help hold the bins in place you should glue a magnet to the inside of the bin and put a piece of sheet metal as the back wall to attract the magnets.

[@MrDalfryth]

Further suggestion for this particular build... on the side of the drawers you can include manufacturer details/part numbers so if your usual supplier has none available you have a means of finding a backup supplier

[@DonChartier]

Sorry, what was the material you used? Thanks very much. Oh, just got my Iris thingy today -- very cool! And the ruler thingy is on order.

[@KarlReith]

For the sake of global happiness can Adam's editor PLEASE make a music track using all the nail gun, staple gun, hammering, foot stomping, knee slapping sounds Adam has produced during these one day builds for this year. I, for one, would be the happiest person to end the year off with an awesome track :D

[@beanacomputer]

Yuri Wong collab!!

[@1pcfred]

Until that happens here's the funniest video on KZbin. Give it time, it'll hit you. kzbin.info/www/bejne/fovQkpmvlNtrnZo

[@madzendar]

Dubstep mancave grind....

[@buddyclem7328]

This is one valid use of autotune.

[@chrisharrell5945]

Dude!! that would be awesome 💯

[@JakeBiddlecome]

Adam Savage is more of a character than a human being and I love every minute of it. I share his joy as much for doing things right as doing things lazily. I can't wait till he's a muttering old man.

[@eithan6985]

15:09 nobody gonna talk about the air kick when he sneezes?

[@lkchild]

“why were you late to work?”. “I was watching some guy on the internet organise his staples. It had a riveting ending”

[@magill4046]

Don’t forget the middle part, he nailed that.

[@MrJacobegg]

I was just talking to someone the other day and I said that Adam is one of those people that I could watch a full 30 minute video off him taking about staples and love it. And here I am!

[@gabiballetje]

Badum tss...

[@googiegress]

I was glued to my seat

[@piratebash368]

Having made several of these over the years my only recommendation would be to run some bungee cord from one side to the other to keep the bins in place when your moving the cart. I learned this the hard way!

[@rhov233]

A simpler way to solve this would be to have the organizer at a slight angle. It will also be easier to see the labels then. Also some padding that adds a little friction would help.

[@Montisaquadeis]

Yeah I think he found that out the hardway at the end there lol

[@RedHeadKevin]

He could have drilled little holes in each shelf to match up with the pegs on the bottoms of the Sortimo boxes. Or have a little ridge near the back of each shelf to catch those pegs. Or he could put shelf liner in each one for some grip. They wouldn't slide out as easily, but that's the point.

[@Ryan6.022]

Yep just a bit of corn across the boxes tight enough to hold but loose enough to pull a tray out over the cord.

[@dimitarkunchev]

What I’ve see done and liked is use thin sheet of metal at the back and glue a small magnet at the back of each drawer. Loved it but probably eon’t work for heavy stuff

[@Ryan6.022]

I know Adam doesn't usually read the comments but he should attach a small length of bungy cord across the front of each row of boxes. This way all the containers are held in place if the shelf tips but it's still super easy to pull the whole container when you want it. It only takes one accident one trip or one fall to just completely wreck your day with small parts in open containers.

[@williamscavone722]

Yup. Im building a mobile trailer shop and every move i make has to consider a rocking trailer on road...

[@TheBurnsStuff]

I appreciate that this build was nearly uncut. I know that I've commented this before but, I really enjoy watching Adam's thought process and execution!

[@VideoNOLA]

The way the rest of us use commas, Adam uses "run fingers through hair."

[@Dreddy72]

Sometimes, you just need to check if what you're thinking is knocking your hair out

[@VideoNOLA]

@@Dreddy72 Called getting to the root of the problem.

[@cgirten]

My English teacher would constantly nag us to use Oxford fingers-through-hair.

[@shelbykingnfs7216]

There is something just so satisfying about watching Adam make shop infrastructure improvements. These have to be my favourite one day builds for sure

[@hurdygurdyguy1]

I skipped all my breakfast time KZbin videos when I saw this!!! Clear the decks, Savage is on!!! 6:49 ... 8 long and 3 high, 32 bins ... where's the problem? It works in the Tardis!!

[@Ashley.Jennelle]

I'm glad that I'm not the only one who caught the 8 across and 3 high thing haha

[@MikeClayton]

Ditto

[@dbstelly]

Guilty!🖐

[@benburoker5192]

That’s some Savage math...

[@sweagboi]

the amount of organizing one day builds makes me want a before and after of everything in the shop thats been organized

[@Blaze22F]

*2:32** this is it.* *This is all the convincing I needed to get a ruler tattoo on my arm*

[@mm9773]

A fisting depth gauge? Why not.

[@mm9773]

Not a huge issue, but yeah, make a fist when the transfer goes on.

[@kevinvermeer9011]

@@AnthonyBowman Where I work (an ISO9001 aerospace shop) all tools not NIST traceable are required to have a sticker reading "For reference only" - that's most of the everyday calipers, machinist rules, tapes, etc. When testing for conformance to a spec, you have to go to the surface plate and use the calibrated stuff. This would need a "For reference only" label...not a bad idea....

[@lgerback34]

@@mm9773 Ha!

[@jasonmanuse39]

Seriously it’s genius

[@SirLightfire]

25:54, this argument applies really well in the software development world too. There's often a half dozen hacky ways to do or fix something, whereas the proper solution might be more time consuming or harder to logic about (and thus less likely to be done). One of the caveats with the hacky way is that, it's more cryptic and thus more difficult for someone else to understand what it's supposed to do, when the hack inevitably breaks. In fact, I've often sacrificed the "clever solution" or "convoluted one-liner" just for the sake of readability or clearer conveyance of intentions. Another caveat is that it makes extending the code (say to add new features) much more difficult, because hacky solutions are often super specific to the structure of the code as-is. And thus unrelated changes elsewhere can break the hack. We have a term for "the buildup of hacky solutions". We call it "technical debt"

[@robodabbler]

I just spent two years discharging the technical debt in our organization. Worked the development team to develop best practices, standards, and then rewrote code to standard, and changed structures to be maintainable. Future me will love past me. Future team will build on this.

[@RobertTempleton64]

I've seen this so often that I ran my own software development business by myself because potential 'candidates' to team up with were of the 'hacky solutions' type. I find hacky solutions loathsome. Would rather find the algorithm/maths and write the code from scratch than use some very limited but easy to implement solution full of caveats and mysteries. Also, it is great that my QA supervisor is cognizant and anal enough to consider standardization upfront. Starting from scratch on programming some of these inspection machines (including CMM) does mean that we have been modifying our system in the process - but the system is becoming more standardized and, most importantly, 'obvious'. Once such obvious processes are determined and proven, it becomes easier to apply them for everybody, including future participants, than any ad-hoc band-aids and duct-tape methodologies.

[@tzisorey]

"Oh my god, *_that's_* where my circular saw is" TFW you tidy and organize everything so well, you can't find anything anymore.

[@srussert28]

I never never to think about it again.... It is such a soft pillow when you might have to think about it again for each of the next nights and days you have to live.... a Very Soft Pillow

[@chrisharrell5945]

Adam, your enthusiasm and passion for building, making, tools and just being in the shop in general is so stirring. Don't ever change man.

[@gsussMC]

Adam Savage, you make me a happy man. What a joy to watch.

[@OneComputerGuyWorking]

Adam: 10:48 "This is so I don't make the 'watch him die inside' subreddit" Me: 32:27 and that's how you make that subreddit xD

[@wobblysauce]

Yep.

[@TheBlueMuzzy]

MORE SHOP OGANIZATION VIDEOS PLEASE! I may not have as much as you, or the space, but limited space makes these videos even more important to me.

[@evalynn1863]

I got goosebumps when Adam said he was going to glue an example of each staple to the labels and if that doesn't perfectly capture how big of an OCD, nerdy crafter I am I don't know what does lol that is perfection.

[@_WillCAD_]

I love how much joy Adam gets from shop storage projects. It's much the same joy I get from such projects. I doubt we'll ever see it, but I'd love to see Adam buy himself a whole new space and move everything into it. That kind of organization - packing for the move, moving the stuff, and finding places for all of his storage and tool caddies - is the sort of thing he thrives on. But maybe one day he'll decide to paint all of the various caddies and tables to make them match. Not necessarily one color, but a family of consistent colors. Maybe even color coded - something for hand tools, something for power tools, something for accessories, something for consumables, different patterns for woodworking tools, metalworking tools, sanding, painting, finishing... Adam would come up with something cool.

[@jackharvey6992]

My grandfather was quite the woodworker, but he was also an orthodontist. Nearly all the hardware in his shop (from nuts and bolts to clamps) were stored in empty dental X-ray compound containers with this exact same type of labeling. Having an example of the price you’re looking for ON the storage space is probably the most effective way to label it.

[@kennethwehrs8924]

Adam, I'm not a builder of things in the sense that you are, but I find your method of thinking and reasoning, as well as your explanation of the way your methods have evolved (as evidenced by your reasons for the rivets) extremely valuable and enlightening.

[@FordWMaverick]

I love how in the time-lapse it looks like the knife display is doing jumping jacks.

[@davidwfisher]

Silicone works amazingly as a label glue. As an electrician we used it to attach phenolic labels to painted switch gear and you can not get one of those labels off without breaking it.

[@nate8088]

The thing I love more than anything else (and I think it's an important life lesson) is that you admit when you make a mistake AND you capture yourself owning up to it on film. That's huge, and it's really important for anyone who supervises anyone else to be very honest about when they screw up. Letting people know you are human, and that you realize you are human, is very important. Kudos.

[@googleplusisvetkutgast]

Honestly, these organisation videos are my favourite thing on the channel

[@shan0802]

25:08 hmmm decisions... Ending with 25:15 the energy there is a mood I'm aquainted with! Brilliant craftsmanship, an elegant solution! Thanks for going through all the process with us... Thoughts and all!

[@r3ngokuking]

That ruler tattoo on your arm always gives me a good chuckle, Adam. Very nice organizer.

[@aserta]

That's how i keep track of my caps and buttons. Large amounts sit in paper bags with one example ear marked in the top left corner, but small samples for quick use sit in old photo film boxes with an example glued, sown or capped on the cover.

[@norkel99]

I enjoy watching these storage/organizer projects. Too often, I'm trying for perfection and spend way too much time trying to come up with, or looking for, the "ideal" solution and end up with no solution at all for long periods of time which leads to frustration when I can't find things that I know I have. Years ago, we used the term "analysis paralysis" for that when I was an engineer. Its good to see Adam coming up with a solution and getting it done even though it may not be the perfect or prettiest solution. It gives me something to think about when I'm struggling to do the same.

[@cemx86]

My $0.02. As always I have an alternate thought to using a rivet to hold the label. My thought began early in the video with "these drawers each need a cute small round graceful brass pull knob to prevent scrapping my finger while poking in and pulling out drawers day after day.". Then the serendipity hit me ... IT WILL HOLD THE LABEL TOO! Enjoy!

[@mmdurfee]

I put those staples on the front of those containers the moment I saw them at 2:05. Then jinxed you at 22:09 while watching. Good thing you found that saw!

[@gwildor84]

Hi Adam. It was so funny to hear you use your last name after you made a mistake I've been making for years. Thank you for everything you do and stand for.

[@UnholiestJedi]

Adam, manically, "I don't have the energy!" Does it anyway. Love it.

[@marktaylor865]

Lol "right, right, right, right, right." Where do i get that kind of excitement and childlike innocence?.

[@majormajormajortom]

That final-act twist was... riveting.

[@wcfdemt]

You sir are my spirit animal...if only I had a fraction of you creativity

[@andrewdonatelli6953]

This is just what I needed. It beats rifling through drawers trying to find the right brads and staples.

[@boydmerriman]

I love it when I find the right piece of wood I didn't know I had - then I say "Nah, I need that for another project!" I have many opportunities to screw something up. It's amazing how much I take advantage of those opportunities!

[@neilperry2224]

Your Swiss tool, in the background looks like you've got an exotic dancer in the shop, when you do the time lapse.

[@michaelyackovich155]

Was wondering if a new build came out today and lo and behold, one did, I am addicted to the 1 day builds and love how you basically take a mousetrap and make it better, I used to do that in my shop I sadly don’t have anymore, always looking to improve on storage and other things, keep up the great work

[@littlekong7685]

I saw one of these at a mechanics shop (Big oilfield engine repair), the guys made it out of welded steel because they could. They also did something quick and clever for it. On each row they welded a bolt, threaded end to the outside wall with only 1/4 inch of threads before the bolt head. This was done in line with the lower 1/4 of each bin. Then they strung a regular bungie cord from bolt to bolt. It held all the bins in place, but you could pull it down and draw a bin out. It had the double benefit of keeping bins locked when the tool chest was moving around the floor (and over the ramps between bays), and it kept each bin in place when it was half out of its slot as the bungie would push up from the bottom and the top of the box would press to the top of the slot. If they had to, they could unhook the bungie as it was just looped over the bolts.

[@mikebonkowski5190]

I built 2 of these structures years ago, on a larger scale, as a shoe sorter for our closets. Later I made a free standing model with the plywood sides, like yours, for our boots.

[@gabrielemarabello1638]

Adam you could put magnets in the back of the organizers to keep them from slipping off😉

[@groermaik]

I like the installation of each kind of staple on the outside of each container. Inspired.

[@philiphochendoner2540]

I take note of the energy and excitement Adam has just about gluing the examples of the drawer contents and that's the kind of energy you want as a maker.

[@ektopia]

Brilliant! I glued examples to all my nail and pin boxes a few months ago. Great minds!

[@MooseZ71]

I 1000% understand the joy in this project's finished result. 👍🏻

[@doncarlton4858]

"Classic move Savage!" That's why God created magnets on a pole! I admire your ongoing battle with shop organization. With the hobby of model railroading there seems to be a never ending story of tiny parts and tools that need organization!

[@christianbarrett3040]

I love the shop infrastructure builds because they are practical and seem to serve more of a purpose then building something that is more artsy.

[@punkboyblue]

Recommendation: have front stops for the bins so you can slide them out and they don't fall out, but you can still take the bins all the way out if need be.

[@equesdeventusoccasus]

In art, the "finishing details" often is the longest part of a project. Your rivets are part of your finishing details. Next level labels, stamped metal labels.

[@Direrain72]

The amount of relief I felt when he said he was going to label them...phew.

[@stophnerf]

I take comfort in the fact Adam speaks to himself through the entire build. I appreciate that he's filming a semi-instructional format, though I would imagine he enters the creative fugue state and forgets the camera/audience. I speak to this extent or else my ADD brain forgets the process and gets distracted by something shiny.

[@twitchyswitchy433]

24:38 Good tip to use when basing miniatures as well.

[@darjanator]

1:56 That Serenity poster.

[@barrettdent405]

Infrastructure builds are the best.

[@larrystrayer8336]

The flustering clumsy spill is so madding. My magnet gets a workout. Great build. And very entertaining video.

[@darylh8657]

My oft-used DIY: magnetic broom.

[@beckermen]

And dig that about you Jerry! Congratulations, you're still my agent.

[@IanTheWoodchuck]

I didn't think rivets, but rather I always seem to get fiddly with trying to actually grab the drawers (I have Vienna sausage fingers!), so I was thinking some kind of cabinet knob through the label and screwed in from the back side would have served the purpose of holding the label as well as giving me a grab point. I love the tab-slot design! I 3D print card-type models for friends and kids and tab-slot is usually the assembly design for them. SO MUCH FUN!!!

[@dragonmaid1360]

Watching Adam hyper spin around his workshop makes me so happy. Buttherascal in me wants to mix up the bins so the colours are random. We all know adams ocd would never allow that.

[@Joe___R]

Nice build, the only changes I would make to it would be (1) Put rubber grip tape on the bottom of all the bins and a piece of steel under the nails/staples to give them a little weight so they won't get knocked over as easily. (2) Lift the front edge of the box up 1/4"-1/2" to help prevent the bins from sliding out when moving the whole rack around.

[@laughingjack9509]

I love watching Adams Videos to see how My favorite mythbuster i grew up with is doing on a side i remember being at a convention and seeing adam and jamie and them talking about an unaired episode of testing the myth of the cardboard of a cereal box is healthier then the cereal inside

[@bbardin]

Adding the fastener to the front is like an IRL Minecraft item frame... PERFECT! Super easy to identify and elegant to maintain.

[@marcdaslama]

my 3 years old daughter just said, that you build that very well. :-)

[@tatts4life838]

Your videos like this has been an inspiration for me to finally organize my dads tools for him to make it easy for him or anyone else to find things.

[@DefaultProphet]

I’m never jealous of the skills Adam has but damn i would be stoked to have like 1/10th of the tools and materials he has

[@davidwhelchel8774]

All I can say is that Adam and these tested builds have cost me a lot of money ;-) I have built this for my little shot!

[@R.Craig.Collins]

As the weather turns, I find myself doing more organization. Love the motivation, and inspiration... thanks

[@pieterpossenier4191]

i have a tool tip for your rived gun. i use a similar one, but on the back it has a clear container. so after you pop a rived, you hit a second trigger, and that shoots the steely thing in the container and you are set for your next rived, and at the end of the job, you just unscrew the container and there you have all the nails collected.

[@aaronlandry3947]

Should add drawer stops for the bins so they don't fall out so easily. On the roof lip of each slot you glue/nail a small bar of wood so that the back of the bin hits this piece of wood when pulled straight out. You can tilt the bin up to make the back edge go under the piece of wood if you need to pull the bin out all the way. This could be a life saver if the whole organizer tips forward and bins start sliding out from gravity... they should all get caught by that lip and your mess to clean up is minimized. This also why many of those organizer bins are sold with a high back, so it catches on the smallest of lips to stop it.

[@DC-mm3wy]

These videos have become a calming Zen moment to me during the lockdowns and stressed times. I Don’t even have a workshop anymore but love the content . Thanks guys .

[@alexwake850]

Really enjoy watching your one day builds, great problem solving ideas for storage. By the way in this video right in the back ground I could not help to noticing something glowing like a furnace, you haven't installed a blacksmiths forge in there too now have you, I bet that's something you'd love to have a go at. Happy building! 😁🗜️🔩🔧🔨⚒️⚙️📏📐

[@kevingerman100]

Love the labeling. I also choose one color marker for each gauge and draw a line down the center of each bracket of nails so when they do break apart and get mixed together I at least know right away which gauge they are.

[@kennethelwell8574]

One refinement to the visual cues of the staples/nails, would be to angle very similar ones like the 18ga. and 23ga. in different directions (L/R) on the label. That way you can identify without reading the words (once committed to memory), and notice if in the wrong spot when returned to rack (pattern is off). This could apply to fine/coarse threads on screws, aluminum/steel pop rivets, anywhere there's a subtle distinction to be made.

[@vaughanza]

Excellent Adam , great job, thanks from South Africa

[@ernestsilva3612]

Looks like a hardware store display.👍 Every good shop does have that. Homemade.

[@englishboy79]

Hi Adam, FYI, it wasn’t FedEx, it was DHL who recognised that shipping out customer paperwork ahead of the actual package would save a lot of time. I believe they started with shipments between SanFrancisco and Hawaii in 1969. Thanks for another great video

[@1pcfred]

Yeah all Fedex ever did was strand Tom Hanks on an island. Which in hindsight was rather forward thinking.

[@zwarrior1983]

The little tiny cinematographic touches these videos have are absolutely awesome. The detail is nice and subtle but well appreciated none the less. Awesome job with every video Keep up this quality of content awesome job!!!

[@MichaelHuikeshoven]

You really nailed this one Adam.

[@1pcfred]

I think he pinned and then stapled it. Everything but nailed.

[@williamscavone722]

Like it. Space in the front scares me. I always put crap in those areas, preventing me from opening the bottom row of drawers!😂

[@richardmarkinco1475]

It would be really, really cool to be Adam Savages apprentice.

[@fjr2go]

Very nice improvement! I really like how you did this, totally agree with the seeing the nail to find the one you need!

[@EEtransmit]

Come on Adam. Clearance and tolerance. You should have it right. 😜

[@scottyost6246]

"fix it now" So true. Like the Swiss Army blade!!! I can't watch the videos without looking for the backwards blade in the background. Can you just move the pin? This was a great build. I am already planning mine in my shop. Keep the videos coming.

[@janejordan727]

Oooh that was so satisfying to watch. Organisation!!

[@ThrowingItAway]

I'm learning more valuable knowledge from Tested than I ever did from the last seasons of Mythbusters. It's honestly a huge success IMO and I'm grateful that it's easy to access.

[@yourpalborno]

This makes me so happy! Going to make one for myself!

[@jcardwell3rd]

You may want to put a rubber pad on bottom of bins or take them to the belt sander to take their feet off. They are tilted forward the way you have them protruding and want to come out.

[@harleychaplin5534]

I can see that unit being rolled around the shop and the castors coming to a complete stop on a power cable or bolt laying on the floor. May want to add a retaining strap to those containers.

[@glennkoenig6078]

Adam, love the build and thought put into the intuitive labels. The empty bin bothered me though, as I would have included it with a blank label attached, so it would be as simple to just write on it and glue the new fastener onto it. The big box hardware stores do the fastening of the sample and I can tell you that it is all I look for as it is the fastest way to find the hardware. Great job, gives me a sigh of comfort.

[@devonbeeman8804]

Why do I love watching these ones so much!! Lol

[@inactive67]

Best part of the build is Adam flipping off the excess ply from table saw. J/K seriously its leaving enough space to put the drawer on the cabinet.

[@daveturnbull7221]

06:50 '...my brain was not working' - welcome to my world 🤣 Did something similar using some of the plastic takeaway tubs. Took me somewhere around 2 years the vast majority of which was spent sitting looking at the disorganised heap of different sized boxes. If only Adam had made this a couple of years ago...

[@catgynt9148]

Very interesting build. Would you consider adding a single small nail / brad from the top down into each bin slot to keep bins from falling out as the top two yellow bins did in this video. A bin could be pivoted up allowing the back edge to avoid the pin. Considering the tight tolerances of your build, 3/8” - 1/4” should suffice. Thanks for sharing this video. Wishing you and your team peace, health and happiness. Hopefully your smoke will keep people indoors and slew the virus from spreading. Peace Adam.

[@robmills4709]

Great idea Adam, thank you for the inspiration. Stay safe.

[@tomasjosefvela1]

Adam is way too excited about organization.....I'm a little jealous.lol

[@PelicanPines]

Adam, Think metal push pins... clip the pin off... make tiny drawer pulls for those bins... Saw you struggling with that one bin... it was my first thought