Adam Savage's One Day Builds: AT-AT Walker Paint and Electronics!

[@tested]

Unboxing this AT-AT Walker Garage Kit: kzbin.info/www/bejne/nnLTZYpnbdaLZ5Y Building this AT-AT Walker Garage Kit: kzbin.info/www/bejne/iXi4pYdogdRsapY Join this channel to support Tested and get access to perks: kzbin.info/door/iDJtJKMICpb9B1qf7qjEOAjoin

[@aserta]

For the editor: if Adam's ok with it, would be nice to have a small scroll on the bottom of the video with the songs he's listening at the time. On my part, pure curiosity, tho i'd fully understand if Adam wouldn't feel ok with putting the songs he's into out there. Not all things should be public. Cheers, you're doing great work capturing Adam's shenanigans into a well edited video!

[@nak3dxsnake]

Remember when these movies were incredible.

[@greg6681]

I’m so geeked. 😊

[@broadstken]

This is cool, my only suggestion as to what I would have done different is to use .02mm enameled bell wire instead of the insulated wire Adam used.

[@peterwilson470]

Adam what brush was u using to put the wash on with

[@SuperBigDog2U]

Not many people can say...."I'm gonna do it the way I would be doing it in the spray booth at ILM ". What amazing memories you must have.

[@rahjelli]

I almost spit out my coffee when it seemed like Adam was going to drop the AT-AT in the beginning, FAST editing! LOL

[@ryan_j_peck]

Yeah, my heart skipped a beat there.

[@jasonplugowsky3086]

I would love to see the following 10 seconds.

[@dtesho]

2:58

[@ListerDavid]

God my heart stopped when he did that.

[@stephenroberts403]

@video editor Definition: Diabolical - showing the cunning or ingenuity or wickedness typical of a devil. Usage in a sentence: Diabolical, your editing at time 3:01 is. 😨😂

[@SonnyinPhx]

At the approx. 15 minute point when he gets the lightsaber to fit in Luke's hand and he has that happy, semi-maniacal laugh....I think EVERY single builder who has been in the process of trying to make something work, and in the end it fits perfectly, has made that similar laugh. It's the joy and relief you feel when you are working on something that you're not absolutely positive will work out comes together just how you saw it in your mind's eye. Bravo Adam, Bravo.

[@cleverusername9369]

Same with paint. I emitted the same noise just yesterday, I'm building the battleship USS New Jersey in 1/350 and I'd been spray painting the hull. You can imagine the stressful moment when I removed the carefully applied masking tape, hoping to find a beautifully straight and sharp black waterline stripe on a model that big. When the tape was removed and the crisp black stripe was revealed in it's straight and sharp glory, I definitely sounded like a mad scientist for a second

[@aserta]

Especially when the idea pops out into your head, you have no immediate true/false feedback just the desire to see if you were right, you meet the items you thought about and BAM you grin like a maniac.

[@Shooter_FPV]

I ended up 3D printing a replica of the E-11 Stormtrooper blaster, took me 6 months. I had MANY of those "perfect fit" laughs, and just as many "this ain't gonna fit" laughs... lol...

[@z1I1m]

Cliff is absolutely the singular HERO in "Once Upon A Time... In Hollywood".

[@guyrivers1143]

Im 48 years old and the AT-AT walker is still my favorate

[@madulazat]

"Aziz...lights..!!" Lol.. love that movie so much...luc besson rocks..

[@David-hi9rp]

I am simply staggered by how many tools Adam has in his cave and then blown away with a rack that he made containing STAR WARS paint set how cool is that !

[@spacepiratecaptainrush1237]

doesn't matter how many times I've seen it or done it myself, the weathering is what sells it, brings it to life, makes it feel real. It's a magic trick every time no mater how often I see it.

[@paulclancy4221]

The weathering is so easy, yet brings models alive.

[@Boylei]

Awesome project! Those LED filaments are the best.

[@teammattchew4657]

Do you have any idea where he found the bulb for Luke’s lightsaber? I can’t find anything of the sort

[@hisownsidekick]

Norm's reaction was hilarious. Love that guy.

[@CrankyQuokka]

Hanging Luke and sabre... SOOO COOL!

[@Felice_Enellen]

I love it when Adam says, "Aziz! Light!" I do this all of the time. 😀

[@loganwills1814]

Wait wait wait... Adam.. I need a breakdown on how Cliff is a villian? that is breaking my mind and I may see this movie totally differently. Awesome work as always!

[@4362mont]

How in the Hell is Cliff a villain??????? He is an awesome stand up guy....we don't get the truth about his wife and everything we see about him is absolute cool calm ....explain Adam!! I've followed you for decades... it's like a friend suddenly declared the earth is flat!!

[@hraefn1821]

tarantino confirmed that he DID murder his wife with a harpoon on a boat for one. Inspired by the mysterious death of natalie wood. Also every action he takes in the film is out of self interest, not for the sake of others. He also breaks the law multiple times and seems to have no real moral compass.

[@bbb462cid]

He's a fun villain. Deal.

[@theantiantichrist]

Maybe because he's a completely self-interested narcissist. He does lots of morally ambiguous and self serving stuff, maybe that's enough to consider him a villain. Or maybe there's something specific we're missing.

[@nak3dxsnake]

Fans of the movie know that he did in fact murder his wife. He picks up an underage girl trying his best not to be tempted by her in the process. He violently murders intruders although there for heinous reasons, he still brutally efficiently ends their lives in short order.

[@Lurtzification]

When the lightsabre initially fit first time in Luke's hands, that giggle that came from Adam was absolutely triumphant. I love it xD

[@coreymacourek1577]

This is SUCH an inspiring video, Mr. Savage! Thank you for documenting your crafting steps and sharing the exciting geekness of light with Norm. You and your team are an inspiration to those who are making our own crafting home in the universe. Some Tatooine dust in my eye there. MTFBWY!

[@tested]

Thank you for your super thanks! We appreciate your support!

[@lain2779]

So happy Adam have discovered wago connectors. They are great, especially for things in modelmaking where you might want to change around on things a bunch.

[@kingbeanxiv]

Those "lightsabers" would also make for some epic looking blaster shots either coming from the AT-AT its self or out of a speeder going past

[@mollygrubber]

What a rollercoaster ride that was lol. From the near-drop to the drama with the neon, that was fun. Another idea, if you were inclined - put a big AT-AT foot-shaped crush mark on Luke's crashed ship lol. So many options.

[@shelbydean9072]

When it lights in the first hanging test; that made me so happy. I happy giggled a long with you. Thank you for the constant joy you bring.

[@SoupyUnicycle]

Adam, a little Lego light Saber hilt attached to the end of the LED would be the icing on the cake!

[@ghostwalker0299]

As a miniature hobbyist i love your stuff. As a human i love your enthusiasm, desire, abilty and way of showing/teaching and inspiring.

[@Cubicle23]

Whomever edited this deserves an award. The cut at 3:00 is a ( *chef's kiss*) perfect. Completely hooks the viewer until an answer is revealed. You... straight to the Pantheon of editors.

[@joepie221]

The detail is really well done. The attention to the uniform Luke is wearing is pure Adam. Well done.

[@kurtstype7468]

That wire roughing through Luke was perfect!

[@mustang_orbit170]

As always, thanks for the video. I could imagine Mark Hamill and Adam having interesting insights while wandering around the shop or sitting in comfy chairs, shooting the breeze.

[@Pboy7272]

10:49 The sound of this man's voice hit me like a ton of bricks. What a truly amazing, groundbreaking, entertaining show Mythbusters was. Am proud to say I was along for the ride. Edit - THE SNOW TAKES THE WIN! WOW Adds so much to the final product.

[@daveogarf]

You are a very lucky man, Adam, to have found your passion and been able to make a living with it! It's fascinating to watch you so completely absorbed in your work.

[@mischieffactory]

Norm saying "YES" then high fiving adam filled me with so much joy.

[@PhantomPilot2143]

I am amazed at how some of the things he does make no sense until it is done. He is a true artist. I wish I could do that.

[@erikcal9097]

Thanks!

[@newmancl0]

I could watch you paint all day. I dont watch ALL your videos. but your painting stuff is amazing!

[@user-gk2cg2th9h]

The wire routing was so satisfying and seeing him light up as he dangled was amazing

[@glennhawley1192]

Well done finally finished looks absolutely awesome, Abit scary at times l was on the edge of my seat thanks

[@roberthoward885]

Just to let you know. You are a master. I love you my brother. I love your podcast. I have learned so much. We may not agree politically but I have been a fan scene the old mithmbuster days. Keep doing what you do to inspire the next generation of builders. You you man and Semper Fi

[@smallman5509]

Eyy I'm very excited, saw this months ago and we never saw it built but I've noticed it in the background of other ODB's so happy to see it be finished. You're all great, Tested

[@TheCreativeWill]

Happy Accident: how the dark areas between the hot spots in the red light make it look like there are the two pilots' silhouettes. Almost exactly like it does in movie when they are cresting the hill...I bet Adam will notice it once they go to take photos, sometimes you can't see how good a thing looks till it's done and you've walked away for a little. Love the love for the build.

[@TheCreativeWill]

Adam could even just cut out a two little people outlines (from the torso up) and glue it to the front of the block of acrylic and really sell the backlit pilot shadows.

[@SEEshadow]

This model is beautiful. The Kenner At-At was my favorite vehicle growing up. Such an awesome toy.

[@Stygian360]

Watching Adam geek out over getting that lightsaber to light up pretty much made my day.

[@deirukin]

I love how excited Adam gets about the small things. Puts a smile on my face every time.

[@gofoats]

Duuuude. This is the kind of build insanity that we love to watch!

[@mikehodson7220]

The parts shot on phone are so much more calming than the hand held shots.

[@Pezzapoo]

Looks nice, you could also add some very light blue hues into it for an extra cold look

[@jmg2023ie]

You've got there in the end Adam and it shows in your excitement, glad you got so much joy out of it

[@drancealot]

OMG, I always saw the round things on the side of the head as the eyes sorta of like a chameleon's eyes. After 40 years I will never see an AT-AT the same way again.

[@neoone5942]

Seeing Adam weathering something (whether it’s a proton pack or anAt At walker) with that soiled brush is something I didn’t know I needed to see!

[@marcpaters0n]

16:53 Doc Brown vibes with the head torch and goggles (and the shirt!)

[@Dilious31]

The sheer delight filling my soul to see this AT-AT complete!!! Astounding! And Luke in the mix as well! I love the journey you take us on with this project (the highs and lows!!). Beautiful end result! Best wishes from Belfast!

[@isfj1009]

Pure entertainment and fascination. Terror and then relief. And then remarkable satisfaction. :)

[@dougdellomo6094]

Outstanding as usual. My only add would be more snow on the AT-AT's "feet" as it has been slogging through snow for some time before Luke gets to it.

[@silentknight.95]

That squeeze bulb would be perfect for filling it with baking soda and using it to cure super glue. Thanks for the idea!

[@WolvesHart79]

Bonus points for the proper pronunciation of AT-AT! ;) If you were a kid when the toy commercials aired on TV you know the truth... P.S. For anyone needing very thin wire for working with filament LED builds "magnet wire" is the best thing as it is super fine and perfect for these "invisible" low voltage wiring jobs.

[@DrVenture45]

My heart skipped a beat when you turned balancing the AT-AT on one palm and your hand tipped the leg of the AT-AT! Had to calm down to enjoy the rest of the video! 😂

[@bretts1646]

I've used Kayte's video for snow in a diorama exactly the way you did. It's saved on my "useful maker content" playlist for a reason!

[@JSeed47]

Norm and Adam's hype fueled my soul today. Thanks fellas!

[@danielclement2832]

Absolutely beautiful display! I felt Adam's pain with that saber break - like a punch to the chest. No doubt you've already ordered more backup bulbs. All those details really paid off!

[@dodorichard]

Adam makes it look so effortless and easy, slapping wash onto the entire model and using a rag to take it off. I would be sh*tting bricks doing that to my model. But it really inspires me to be more loose and free aging my stuff. Yoda Adam gives us another lesson!

[@williamcooper2368]

That hanging LUKE is amazing.❤️

[@Strigulino]

When you were painting the rust on the legs I got real Bob Ross vibes which is not a bad thing. Happy little AT-ATs. :)

[@jediyakare]

congratulations a work of art in metal and snow

[@nashhussan4568]

Master at work. I love the chaos Adam has in his approach. Makes it look easy but weathering is an art form in itself

[@kenkline6319]

The hot spots you mentioned make the shadows look kinda like two guys driving the AT-AT. Very cool! Nice work.

[@cptairwolf]

The battle of Hoth is still the most amazing cinematic experience I've ever had!

[@scaleplastichobbies]

Adam., I could sit and watch your channel for hours.. I've learned so much from you ,I don't know where to begin.. I'm a model builder myself and I have a channel on KZbin showing my builds.. I just want to say..., thank you for the things I have learned from you. Some day I hope to meet you in person and tell you some stories on how you've inspired me.. take care my friend.... I'll be watching. Tommy Moore

[@joelmcfadyen]

All that careful work paid off in such huge ways! And what an amazing idea from Norm to have the lightsaber work; seriously cool project.

[@neilkennykenny4113]

I'm gob smacked how lifelike the small details make it pop. The ATAT looks so used and worn.

[@SANFRANCISCO49ERS_PYRO]

Fantastic Job Adam!!! You make me want to time travel back to the late 70s and work for IML. 😊

[@veganconservative1109]

This is seriously making me want to watch the movie again.

[@Sanxibar]

Great build, I'd say one thing to bring it more to life would be footprints, both from Luke and the At-At and some snow on Luke's boots and legs.

[@davidbrennan7422]

"Then all that was left was to paint the edge of the base with Black 3.0.....and I called it good." Definitely Boylei Hobby Time vibes. And just like his videos, excellent result.

[@Misterdbw]

Really nice close-up camera work on this one. Really fun to watch! :)

[@daviddickinson6346]

Looks amazing. Love these videos Adam. Cheers Dave

[@rickpalo1]

Fantastic job! You did such great work . Wonderful perseverance!

[@robp5141]

Brilliant video! 21:24 is the reason every person who does this type of stuff does it.

[@mlubecke]

Who else heart just stopped when Adam almost dropped it??? ❤😳😳😳

[@jameshamaker9321]

I felt a thump, in my chest, when it happened. You're not alone, with that feeling.

[@CiskeDeLange]

Loved the subtle 5th element shout out. But most of all that lightsaber is cooool

[@Mtlmshr]

Well Adam this is one little boy that did not know how to make light saber sounds however I did know how to make great Race Car sounds and low and behold I became a Race Car Builder who now happens to have a Fabrication Shop at Sears Point RaceWay (just up the road from you) although I was never a StarWars geek I did enjoy the movies but my whole thing in life while growing up in So Cal was Race Cars from as young as I can remember and now at the age of 62 I’ve done it on some of the biggest stages! I guess what I’m saying is “Follow your dreams” because they do come true with hard work!

[@telboy1965]

Absolutely fantastic work and absolute pleasure to watch thank you Adam keep them coming 🤙🤙🤙🤙🤙🤙🤙🤙🤙🤙🤙

[@hald64]

It looks soooo cool. Like taken out of the movie. And I love the way you do weathering, makes it look so real. I always enjoy watching you paint models. You are the best dude !!!

[@zachbaer2655]

ty adam! good info and good fun guy who we all grew up watching along with the old team, they opened minds of young n old. i wish to craft just like him including the others

[@TK7837]

Adam had the spinning wheel of doom running all the time in the background 🤫 I felt the same way when Luke's saber was turned on, 😍😍😍😍🥰😎😎🥢

[@toyfreaks]

That's gorgeous! Thanks for spilling the secrets on how to sell the scale of something this big.

[@misery13666]

The AT-AT, the only armored personel carrier that makes the American Bradley look like a resonable solution.

[@jq_public]

Picking up my Jaw sir… you’re a true student of your trade. Just Sick!!!

[@Parker_King]

Adam savage, the Bob Ross of model weathering!

[@_ThatBandKid_]

We must make sure this man is protected at all costs, because no matter your age his content is entertaining.

[@allonewordcaps]

I’m sure you didn’t mean to exclude anyone. But everyone knows how to make the light saber sounds. They are just so cool. It’s amazing how you got the tiny light saber to work. Lots of love ❤

[@EpicMuttonChops]

agree, but i also understood it as "fewer little girls in the 80s were SW fans, whereas almost all little boys were" one of those unfortunate generalizations perhaps

[@allonewordcaps]

@@EpicMuttonChops I was a big fan (and a girl). I was pretty much excluded from any SW cool stuff. So it hit me a bit close. I bet that there were (are) more girls out there too. I bet just as many as boys. They just didn’t get to show it. And all the transgender and all other orientations too. It is complicated. He could have just said everyone. Can’t be right all the time. Can’t say everything well all the time too. I know that. I know he is inclusive of everyone. Much love to to him.

[@T00LF00L]

WOW! I'm just as excited as you are! 🤣 That looks amazing!😍

[@aserta]

9:27 smallest possible wire you can get is from a pair of headphones. A quality set is perfect for this. Strip the cord, untangle the wires and choose the one you want, that thing is as thin as thin gets and from a meter away it basically vanishes. 58:09 you can also use actual rust. Either scraping it off a parent source (a rusty something) or by making rust out of iron powder and mixing it with a thinned out lacquer. I've used this method many times to make rusty cars... and it paints on like paint and you kinda do a reverse of painting on (using a hard pig's hair toothbrush) scraping it off to make it conform to what i want before letting the lacquer set. Nothing like actual rust, looks like rust, quite like rust on any scale. Yet another method, tho a bit more expensive is to make find ground iron powder and spray paint it with very thinned out paint that's in the color scheme you need, and then wetting it, thus creating the rust effect you desire, again, very realistic.

[@corrinastanley125]

You are getting more spare light sabers , right....? Lol. Great build thanks Adam and the Tested team Tested team.

[@jeremyp7013]

This is the coolest thing iv ever seen. For real

[@goodwill_hunting]

So excited to finally see the end result

[@g33z3rhd]

Immediately I knew I was going to like this video when you called it an AT AT instead of an A-T A-T like I have heard SO many people say today!

[@ZGryphon]

I don't really have a strong opinion one way or the other, but I feel like pronouncing the letters individually makes some sense in parallel with the AT-ST (since pronouncing that "at-sit" just seems silly :).

[@glenriches4779]

Miniature wargaming has afew techniques that help with projects like this. One example is conductive paint so you dont need to hide wires on the model. Also technical paints that mimic everything from snow to lava.

[@jedifyfe]

This has Boylei Hobby Time vibes.

[@forcedtoregister100]

Needs more calling it good

[@jedifyfe]

@@forcedtoregister100 😂 totally.

[@gogopogotogo]

That is effing gorgeous. What an incredible final result!

[@domagojroscic8054]

Very Nice! I thought that I was the Only One sayin " Aziz, Light!" when I turn on the lights🤣

[@austindeertay]

Norm was so excited 😂 turned out amazing!!!

[@pingje]

lol, I am loving the editorial touches like the music

[@s13Marino]

Looks incredible. With those tube lights I like to run a thin bare silver wire down the side, and then put clear heat shrink over the whole thing to protect it.