TESTING HAKKO SOLDER SMOKE ABSORBER! (& Tip cleaner/chemical paste!)

Hey!!! Thank you for checking out todays video, testing out a few Hakko products! I will link everything used in todays video below for ease.
I hope you enjoy! Don't forget to like & subscribe for more art/glass content!
HAKKO USA- hakkousa.com/
*SMOKE ABSORBER- hakkousa.com/f...
*TIP CLEANER- hakkousa.com/c...
*CHEMICAL PASTE- hakkousa.com/f...
* HAKKO FOR UK BUYERS*- www.hakko.co.uk/
* WORLDWIDE DISTRIBUTOR PAGE*-hakkousa.com/s...
* MY MAILING ADDRESS
Makenzie Norton
P.O.Box 60132
Worcester, Ma. 01606
*OR
Makenzie Norton
290 W.Boylston St.
#60132
Worcester, Ma. 01606
* FOR BUSINESS EMAIL*- [e-mail]
Because so many have asked
If you really want to tip your KZbin glass & craft teacher- My Venmo is- @Makenzie-Hallie
* MY SOCIALS & CONTACTS-
** INSTAGRAM- @makismysticglass - / makismysticglass
** MY ONLINE STAINED GLASS STORE- www.etsy.com/s...

[@DannyP...]

You keep hitting all the marks! I was wondering about these. I searched a review and here you were. Appreciate the videos as always. Got my mom a Score one cutter after the salesman told me to research it for my mom. We both watched your video and she is loving it! Drove up to MIchigan Wed. and picked up an Evenheat glass kiln. Skipped the Wizard after your review and bought my mom The Grinder. I hope Tecniglass sends you one for free. It is so amazing. $$$$ and lots of $$$ add ons but it took me about 5 mins to go from zero to hero with the simple shapes we have been practicing. My foil looks great now. Loving it! Hopefully that will improve my soldering. I am struggling. What temp do you set your iron at? Loved the jumping spiders. I was thinking honestly when you were explaining the little habitat Ooh she should get a coffin shape... and then it was. That is so perfect for you. Cool your husband has them too! I am worried about my mom's dog getting glass shards in her paws. Going to look for some black rubber flooring or something a can put around the bench. Have a great one!

[@MakenzieHallie]

Thank you so much Danny! And yes, absolutely, for mom and moms dog. Shards will and do go absolutely everywhere in this craft. So minimizing the spray from a grinder or while your cutting is important. I keep my dogs out of my office essentially at all times, it is blocked off with a gate. Period. Unless I've freshly deep cleaned and know it's safe. Everytime I cut or grind I fully vac not only myself but all surfaces before walking through the house. The small shards are the scary ones. Can't see or feel them until an infection is forming in your foot or your dogs. (No that has never happened to me, knock on wood, but that is the fear.) And I'm so glad you went with the grinder instead, I WOULD LOVE if they sent me one too. 😂 BUT IDK if that'll ever happen. The older I get, the harder I am on brands. I might be a liability. 😂😂 With all that said, thank you so much for your support. I hope you and Mom are doing well!! And just keep practicing practicing practicing. You'll be foiling with your eyes closed in no time!

[@j.c.7555]

Thanks so much Makenzie. I have been binge watching your videos and I must say you are one of the best teacher with thorough instructions on the world of glass and tools. Definitely to my level of comprehension. I love these videos so I hope they keep on coming. :)

[@MakenzieHallie]

So glad your enjoying my channel!! Thank you for watching!

[@me_92other42]

Hakko is a number one company! I did fill the bottom of the tip cleaner with lead shot to make it stand still.

[@MakenzieHallie]

Good tip! Thank you for watching!

[@ralphbumbaca8828]

Most informative and best suggestions for almost anything to do with stained glass great job

[@jmheller9268]

Love it. I have been using Weller for years..(1988). And have been wanting to try the Hakko brand of products. Thank you for sharing this demonstration. I will be purchasing soon! Great video.

[@MakenzieHallie]

Thank you for watching!

[@fountainofjewelz1844]

Congratz on getting stuff to test!! That's a big deal!! Great review too. Also, you always look cute but that top was super extra cute on you! Keep rockin, luv ya! ❤🤘🖤

[@MakenzieHallie]

Thank you! I was so excited it was hako this time, much appreciated! And I appreciate that so much, thank you!!! 🖤🖤🖤

[@Michael-w8v]

Nice video. I have Hakko FX-951with smoke absorber at home. I don't always use tip tinner with lead-free for a long time.

[@glasgowbeck]

Love this video, thanks Makenzie. If we're ever feeling we need a nudge to get back to work, new kit will always do it 😃 Hakko products are so well made, just perfect for the small business or craft solderer 💖 happy weekend to all from soggy Scotland

[@MakenzieHallie]

It absolutely will. New stuff is always that something fun to look forward too lol. Thank you for watching!

[@billkrueger9305]

I have been using the Hako smoke absorber for about 18 months...have found that it does work better in the 'up' position as you found quickly. Great review, keep on cutting!

[@MakenzieHallie]

Definitely, it's alot easier to visually see it getting pulled in. Thank you for watching!

[@chrisharris2318]

Fantastic as usual! Thanks for showing us products and how they work.

[@MakenzieHallie]

Your so very welcome! Thank you for watching!

[@justinclaiborne1716]

Check out the 633-01 iron holder. It holds the 601 and the tip cleaner. I really like my smoke absorber and want the arm, but the arm is quite expensive. I missed the instructions about the filter turning white, so it was nice to learn something new today.

[@MakenzieHallie]

Glad you learned something still! And I've definitely been thinking about it. The arm is expensive, but looks so cool lmao! 😎

[@unapologeticallyme8513]

Yay another makenzie video! I just today went to grab my taurus ring saw 3! I'm so excited to use it! I even found a gorgeous piece of lavender/mauve iridescent glass to play with ♡ thanks for 8nspiring us makenzie♡

[@MakenzieHallie]

Awesome!!! Have fun and as always, thank you for watching!!!

[@juliesilvasy9490]

May have to try the paste. Purchased the tinning powder you recommended. I like but wither I'm obsessed with doing it or it sucks it up. Have it in my cart LOL Oh BTW.... Finally decided to spend a little extra on my soldering iron...got the Hakko FX888 and I LOVE it. Made a complete difference in my solder beads. Thanks

[@MakenzieHallie]

Tinning powder? I'm not sure that was me? Idk what that is. But I love this paste, worked so well and melted so fast compared to my normal tinner. I'm so glad you got a good iron that your happy with!! Makes all the difference to have a good iron! Welcome!! Thank you for watching!

[@kerianneodwyer8800]

ayyyy Hakko coming in clutch

[@ShukiCraft]

great absorber!

[@adamnowak8876]

Nice fume extractor(s)

[@jenihead129]

Am I understanding correctly that by using the smoke absorber, you don’t need to wear a mask to limit smoke inhalation? If so that would be awesome as my safety glasses fog up when I wear a mask 😬

[@MrBeatenpath]

Hi..i just had the hakko fx-888d soldering station delivered and not sure what tip/tips i need to order for soldering tinned glass...you may have covered this but ..if you could point me in right direction..thanks and happy halloween!

[@MakenzieHallie]

Hello! Happy halloween!! So you need just the standard stained glass iron tip. Just give that a Google "stained glass soldering iron tip". Flat on both sides. 🖤🕸🖤

[@7spiritualcompass706]

I'm just wondering if it would serve me when using epoxy resin while curing. Anyone try that yet? I'm trying to avoid wearing a vapor mask all the time while filling moulds.

[@MakenzieHallie]

I do not have enough knowledge about that to say for sure. But i imagine whatever specific resin your using would specify that near where they talk about what fumes they have or dont have in that brand. To be 100% sure, i would probs just email whichever company for some straight definite answers on that. Sometimes easier then the black hole of answers and opinions on the internet. Lol.

[@7spiritualcompass706]

@@MakenzieHallie Thank you.

[@FaithZiegler]

What brand of solder have you found is the best?

[@janerobo5911]

Totally random but how big is the belif pot you use for your cutter oil Is it 50g? 🤔

[@MakenzieHallie]

I'm not sure! I think its the sample size or travel size. I'll check when I'm home!

[@terishannon3239]

What is the chemical paste, a cleaner?

[@MakenzieHallie]

It is for addressing oxidation. I just linked you on your other comment so you can read everything about it! 🖤 thank you for watching!

[@terishannon3239]

Great info but don’t know anything about the chemical paste

[@MakenzieHallie]

hakkousa.com/fs-100-tip-cleaning-paste.html here is a link to the product, they can tell you everything about there specific paste! 🖤

[@diegonloreto]

Whenever you're in the harvard area on a monday, I can have my brother hook you up with a mexican sandwich, greetings from Sonora, México

[@danielletulcidas4709]

Why did you change the brand of solder you use?

[@MakenzieHallie]

Because the price of metal has gone up, buying bulk solder this was cheaper and I could get more! Don't particularly like it however.

[@europeantinbeater]

First ! ♥️♥️♥️

[@MakenzieHallie]

Appreciate you!

[@europeantinbeater]

@@MakenzieHallie actually appreciate your videos ! That smoke absorber is doing a great job!

[@MakenzieHallie]

It is! It's a great size, and the option for "widespread smoke absorption" says alot! Im happy with it for sure. Thank you for watching!!

[@europeantinbeater]

@@MakenzieHallie yeah we used to use a smoke absorber from a deceased company (cant remember the name, no longer in existence) happy there is an alternative out there

[@MakenzieHallie]

Most definitely. And a good one at that! I trust Hako deeply.

[@vanessawilson1704]

But Makenzie, it's blue!😉🤣

[@MakenzieHallie]

😂😂😂 I LITERALLY SAID IM GUNNA PAINT IT BLACK, DONT TELL HAKO!! BUT I REMOVED IT FROM THE VIDEO!! LOL!!!

[@vanessawilson1704]

@@MakenzieHallie 😂 Your secret is safe with me! 🤫

[@MakenzieHallie]

Thank you! Lol!! I felt guilty, I know the blue and yellow are hakos colors, so I didn't want to be offensive 😫

[@vanessawilson1704]

@@MakenzieHallie As it's you I'm sure they won't mind!😃

[@MakenzieHallie]

🖤🖤

[@tuyenphanminh1416]

Too dangerous to the beauty.

[@MakenzieHallie]

Thank you? 😂🖤🙏🏻