About 6 years ago I bought an air powered die grinder off wish for $15usd, it came with a dozen different bits, different size chucks etc. I thought it'd be worth a laugh but no, it's worked flawlessly up until this very day! It gets used multiple times a week and I'm still amazed at how damn good it is. Wish is full of crap but once in awhile, that crap is accidentally great 😅
@sonorangaming4492 жыл бұрын
I have bought a few things from wish for my kayaks, and camping. They work well. Bought a cheap skeg for my swifty to help it track, and it works. I also bought some nice metal guy line tensioners my tent, and they work great.
@vinno972 жыл бұрын
I bought a "250GB" USB stick for just a couple bucks. It had a fake memory chip and it's actual size was 32GB, but it's the biggest and fastest stick I've owned and was actually great value
@allio34592 жыл бұрын
everything is made in China even the expensive tools. so i would say cheap tools will work fine. i dont know what donut media is smoking...
@Cheepchipsable2 жыл бұрын
@@allio3459 Yeah, that jack seemed good for people that might have some mobility issues or older people. Even to use those cans of tyre sealer to. I've seen a lug nut remover that you put over the wheels, but you could carry an impact gun, though those repair kits in a can are quite good and easy to use. Cheap tools are best when you just want to use something once or twice and will probably not use it again in 5 years.
@allio34592 жыл бұрын
@@Cheepchipsable exactly. If cheap tools will last for 5 years or more with good care and under $50… that’s a good fucking deal.
@Spoticor2 жыл бұрын
I was gifted the 198pcs tool kit from one of my friends after I moved away from home to join the navy, and I have to say, while some of the pieces' handles have fallen off and I have to shove them back on, it has been great to have. I've used it to replace radios, door locks, window motors, and wheels along with other small maintenance around the house. It may feel cheap, but I've put a beating on those and they've lasted over 4 years now
@MrTehNoms2 жыл бұрын
I love how the first they do after opening it is trying to break shit hahah
@DjDolHaus862 жыл бұрын
Yeah you can't go too far wrong with cheap hand tools and you don't feel anywhere near as bad if you lose them
@vinno972 жыл бұрын
For many people, it's better to have a lot of specific tools than to have a few high quality tools! My 10 buck ratchet screwdriver broke within 1 ikea bed, but now I have 30-some screwdriver bits that are surprisingly good if you're not driving anything into walls
@theepicricemaker66112 жыл бұрын
Well for the price that's DAMN good
@1pcfred2 жыл бұрын
For a set of house tools it's fine. Most folks have a claw hammer and a couple screwdrivers and that's it. That's all in a box in the closet with a broom handle as the tool box handle.
@mlbest70002 жыл бұрын
For plasma cutters, if you disconnect the air while the machine is on, some machines make you restart it. And often times, if the consumables on the torch head aren't tight enough, the machine will also not work until you tighten them and restart the machine.
@HerecomestheCalavera11 ай бұрын
Yeah it sucks they really didn't make much of an effort to see if it really worked.
@eliwhitley187810 ай бұрын
Didn't even skim the destructions
@RobertDickens20028 ай бұрын
Then they wouldn't be able to say it sucked the jack worked fine and they threw it in the trash.
@jamesl14jamesl147 ай бұрын
I would not trust that jack 😅😂
@RobertDickens20027 ай бұрын
@jamesl14jamesl14 it's for changing a flat not a transmission
@spddracer2 жыл бұрын
The $10 impact, and 192 pc tool kit would be perfect for a kids present. Inexpensive but useful enough that a kid could learn, and you wouldn't be out much if something broke.
@Cheepchipsable2 жыл бұрын
No, your kid would start to disassemble things at home. Very unlikely a kid would preak a socket set or screwdriver. An impact, maybe by dropping it.
@xuavrice23382 жыл бұрын
@@Cheepchipsable Maybe if your child is under the age of 5.
@thundercricket46342 жыл бұрын
That idea would have terrified my parents. I took things apart all the time. No kitchen appliance was safe.
@DECIFERTHIS092 жыл бұрын
“Dale I said no power tools” haha
@Kryynism2 жыл бұрын
I just give my son my old tools I don't use anymore
@SteveCozz2 жыл бұрын
Ever since I watched the torque wrench test, I’m always scared for the eyeballs of the Donut Staff when I see a new testing video
@zhershey652 жыл бұрын
All about them safety squintz fam
@aaront44942 жыл бұрын
Ha
@yutub5612 жыл бұрын
They really need some better safety precautions for these tests
@kingofallworlds2 жыл бұрын
They need OSHA in their lives
@blvdes2 жыл бұрын
@@zhershey65 facts
@nordicberserk Жыл бұрын
For the orbital sander, I suspect it IS a Bosch sander. The factory just "accidentally" made an extra batch of them, without the branding, and sold them to a company that slapped their own brand on them, and threw them at Wish.
@auntie_Slayer Жыл бұрын
Sweet deal if so.
@blankityblankblank2321 Жыл бұрын
That is 100% what happened. They do this all the time.
@1MajorTom Жыл бұрын
it IS a Bosch sander 😉 and the funniest thing is that they are made at Bosch😅
@paulwalked5810 Жыл бұрын
Might be factory defects, quality control failures they strip the brands from as well
@MrKoyama200411 ай бұрын
@@paulwalked5810 I think more likely a "third shift" product.
@nickantom.40992 жыл бұрын
Zach saying "Jobe!" while shooting stuff in the trash is a great example of why I love this guy 😅
@packersgoat47492 жыл бұрын
Kinda disrespectful to a legend
@kanedaku2 жыл бұрын
@@packersgoat4749 No its not. What a silly thing to say.
@braelee.2 жыл бұрын
@@packersgoat4749 literally how
@RedXCal2 жыл бұрын
@@packersgoat4749 its respecting his talent, which is why people say Kobe when dunking stuff?
@JackRR152 жыл бұрын
Why say Jobe instead of Kobe
@andyn462 жыл бұрын
The wobble on that impact is a design feature, if you read all the literature you’d see Wish incorporated a u joint to help access all those tough to reach nuts and bolts
@brucedaboss31322 жыл бұрын
They really thought about the consumer on this one!!!
@TotalyKill2 жыл бұрын
@@rickrolled3666 Finally!!!
@Sheridantank2 жыл бұрын
It also would be plenty good for taking wheels off once you break them loose. A lot of people use breaker bars and lug wrenches. For the price I could imagine using it only for that. I wouldn't use it to take things loose for longevity.
@TrashcanRaidingPossum2 жыл бұрын
@@rickrolled3666 Trash
@TrashcanRaidingPossum2 жыл бұрын
@Caroline Hot 💋🌹 Trash bot
@willowashe Жыл бұрын
My dad got me a tool set like the one in this video (but smaller) when I was a kid and started to get interested in tools and cars. We were renovating our house at the time and I felt so grown up to be able to bring my own toolset out to do the little jobs I could help out with. When he knew I was responsible and wasn’t going to lose or break anything, he let me use the good stuff. I kept the toolset in my closet for years, it was convenient to have to hand for any quick jobs in the house without going out to the garage/truck. They aren’t great, but they have their place at times.
@AaronSkone2 жыл бұрын
Jerry and Jobe are honestly my favorite duo at Donut. One's a professional mechanic and the other is a mechanical engineer and their combination of science and experience, plus their personalities make them my favorite to watch.
@oronq20102 жыл бұрын
An engineer? And doesnt know that there isn't a drop of hydraulic fluid in that thing. Hydraulic pump???
@raphprev73122 жыл бұрын
@@oronq2010 jerrys the engineer
@Kevin-dt9xm2 жыл бұрын
@@oronq2010 1: jobes the mechanic, jerrys the engineer 2: it was a brain fart, he mispoke, he corrected himself.
@rickdlt Жыл бұрын
Yea mine too. Their chemistry is entertaining lol
@prezidenttrump5171 Жыл бұрын
They don't have personalities.
@AlbinoFuzWolf2 жыл бұрын
I could see the $10 impact being decent for like a RC car/boat hobby, also realllly wish they took the case off the plasma cutter to see if it was faulty or just a full blown scam.
@quillmaurer65632 жыл бұрын
Perhaps, feels a bit big for that. I think it would be good for light-duty work, not the high-torque stuff you'd want a good impact for, but as a convenient tool to use instead of a manual socket. I have a similar (supposedly) plasma cutter (is blue rather than red, but looks similar and has "CUT 50" written on it) and it does work. Not all that powerful, but that's because if I turn the power up too high it pops the breaker, not it's fault. With a higher-current or 220 outlet it would probably be awesome. Really wish they'd given this stuff more a chance, I feel like they were prejudiced by the price. Maybe they should have tested the stuff before hearing the price, not after. They should change the order of this, instead of look at, guess price, hear price, test, decide to keep or trash, they should look at, test (thoroughly with real expectations), guess price, hear price, decide if is worth that price or not.
@zachsheffee84582 жыл бұрын
@@quillmaurer6563 Maybe even test it against the brand name one!!
@jdrevenge2 жыл бұрын
What on earth would you be using an impact for on an RC car or boat?
@darthrevan6112 жыл бұрын
@@jdrevenge 1/5th scale rc cars we use impacts on the wheel nuts and sometimes need one to break loose some of the bolts.
@Redsr52 жыл бұрын
@@darthrevan611 I’d use a 1/4 ratchet lol
@DanakarEndeel2 жыл бұрын
Shame you guys didn't open the plasma cutter to see what was inside. Considering this came from Wish I wouldn't be surprised if the only thing in the box was a case-fan, some wires for the light in the switch and a brick that was glued on the bottom to make it feel heavy. 😅 Also, you have to check the shipping costs as that's where these companies make their money. Like they charge you $30 plus $90 in shipping while they pay next to nothing to ship via bulk container (which is why it usually takes 2-3 months for stuff to arrive).
@adrianishtar0 Жыл бұрын
A brick of what tho?
@DanakarEndeel Жыл бұрын
@@adrianishtar0 Unfortunately just a regular brick most likely.
@Fetidaf Жыл бұрын
@@adrianishtar0 or coke… who’s to say, really
@PHEARVII Жыл бұрын
China can ship products for nearly free due to the United postal union act hence how wish can offer free shipping on every product.
@mromutt Жыл бұрын
Yeah it was a bit annoying they didnt say the shipping because thats part of the cost, and just like you said they put a super low price but then make the shipping something insane to equal the real price.
@littlejohn-pi7kk2 жыл бұрын
The $10 impact would be good to use to put wheel nuts back on. It won’t over torque. Then you can go over with torque wrench if you want to.
@sirbrokenlegs20742 жыл бұрын
That's what i was gonna say. At our shop we do just the thing, use the small impact to secure the wheels to the hub somewhat, if you weren't brave enough to do a few quick zips with the full-sized air impact, lower the car then torque 'em. I love using that Makita DTW251z, a quality tool that works like a charm. And then to have that 10$ thing do just that, yea i'd actually buy it. If something's got big torque, i'll break it loose with the breaker bar, and use that cheap piece of shit to do the rest aside from torquing them down. Of course i'm not gonna expect it to last for years, but i'm sure i'll get at least some of my money worth out of that thing. People buy a lot more useless things for even more expensive than 10$.
@texasslingleadsomtingwong87512 жыл бұрын
So , what we need to do is give this to the coconut who changes oil .
@quillmaurer65632 жыл бұрын
I'd find it useful for a lot of things. Not heavy duty stuff I'd use a real impact wrench for, but light-duty stuff you'd use a regular socket for. I'd personally use it a lot. I have a corded impact wrench, which is quite useful but a bit of a hassle to drag the cord out for it, so if only doing light-duty stuff I'll typically stick with a socket set. This could make such work go a lot faster, a convenient but not capable tool.
@sirbrokenlegs20742 жыл бұрын
@@texasslingleadsomtingwong8751 If you see someone actually use an impact just to deal with the filter and the drain plug, you know to look somewhere else. Like plenty of times it's fine to use an impact on plenty of suspension and a few engine parts. But nobody would be dumb enough to use them on spark plugs, drain plugs, internals' or cylinder head's bolts.
@texasslingleadsomtingwong87512 жыл бұрын
@@sirbrokenlegs2074 I've had my fair share of way over tightened oil drain plugs , enough to make me think the guy in the bunker has a five foot cheater or a very quiet impact , lol
@MaxSpeedMike2 жыл бұрын
Build quality/durability is one thing when it comes to cheaper tools, but safety is the biggest issue.
@Neishy4AGTE2 жыл бұрын
Nah
@RecklessRobby2 жыл бұрын
Shutup nerd
@emptycoffin2 жыл бұрын
Zzzz
@INMATEofARKHAM2 жыл бұрын
Well, yeah. If you can't afford expensive tools you likely can't afford the lawyer for when you cheap tool maims you.
@loganwork70242 жыл бұрын
Never had a problem with my harbor freight tools, use the jack every day, but i wouldnt trust tools that are cheaper than the materials should have been
@Benjyman312 жыл бұрын
I'd love to see them make an entire mechanic starter kit using exclusively wish tools. Either set a budget or have a competition to see who can do it cheapest. Like impacts, hand tools, sockets, organizers, tool box, everything. Close to everything that a C or B level tech would need to get through the week. That'd be fun to see who can get the most functional, and diverse tool collection this way.
@prestonsears11842 жыл бұрын
Good idea!!
@megladon6 Жыл бұрын
The one whose tools function for the lowest price get the point. So tools that are so cheap that they don’t work would lose you the round. Kind of like price is right but for cheap tools.
@tsherwoodrzero Жыл бұрын
@@megladon6 Maybe do it like a classic Top Gear Challenge? For $1500 or so, someone buys their first car and has to use the change leftover from the purchase price for tools to learn routine maintenance.
@danielevans6578 Жыл бұрын
This is a fantastic idea. They already stole the magnet "best of" board from Top Gear. Why not the challenge structure too 🤣🤷♂️
@danielevans6578 Жыл бұрын
No, but really. This sounds like a great idea and would watch HOURS of them doing stuff like that from them.
@SuperWooba2 жыл бұрын
Jeremiah totally dug that electric jack out of the trash after filming was wrapped lol
@nightkidnick2 жыл бұрын
I think they failed to realize that wish sellers don’t actually sell those items that low. They make the price low but then they add a lot in shipping, so while the tool set was $10, they most likely charged a lot more in shipping, making the actual price a lot more.
@jbarzee00012 жыл бұрын
Exactly! Shipping on the wrench is $90 and shipping on the plasma cutter is over $200
@NonBinaryBisexualAdhdAgender2 жыл бұрын
Yep. Or its for a sold out colour, toy version, some size of item that noone would ever use, or just an accessory. You need to click buy and add to your cart to actually see what you would get or what you would pay. Same goes for eBay and aliexpress usually
@gutturf2 жыл бұрын
@@jbarzee0001 That impact wrench for a total of $100 totally changes the proposition. I _wish_ they had mentioned the total price.
@noobsimdriver2 жыл бұрын
The shipping issue is new. It goes up and down daily.
@jbarzee00012 жыл бұрын
@@noobsimdriver it is not a new issue. Ordering from China has always been that way. It started on eBay over 20 years ago because you only paid fees based on sales prices now including shipping.
@motarted17352 жыл бұрын
The plasma cutter definitely needed more investigation, it would have probably been an easy fix. I have the exact same one only I paid 120 for it and it cuts great
@futuregamer57912 жыл бұрын
I was just saying the same thing and then looked at the comments and seen your comment. They should investigate. They can probably do a whole episode just on that plasma cutter.
@VOID_WARRANTY2 жыл бұрын
I bet styropyro can make a 1 MW pulse laser with it.
@CDCI3 Жыл бұрын
I need to know what was wrong with it. Like, was it just a valve needed opened somewhere? Need. More.
@MW-zy4no Жыл бұрын
@@CDCI3 Same here, my mind is just stuck there now why it didnt worked? i would have spend hours on it before I come to a conclusion that its dead. Should have tweaked it a lil more for our satisfaction lol
@CDCI3 Жыл бұрын
@@MW-zy4no Right? They were seeing 0 PSI? In my mind, I think it has to be one of two things: 1. The regulator and the gauge are separated (by a valve?) and there is pressure built up somewhere. 2. There's a massive leak before the gauge.
@Scortcorder2 жыл бұрын
Big round of applause for Jimmy everyone!
@SpaceMissile2 жыл бұрын
@@rickrolled3666 fuckin' robot account - why aren't you banned yet?
@roguesample2 жыл бұрын
Dude needs to tie his shoes! OSHA is coming for you DONUT! 😮🤣
@greecoboost2 жыл бұрын
Jimmy....your shoes, bro....ugh...
@genem72342 жыл бұрын
I've had that exact electric scissor jack (thought from Amazon) for over a year now and I love it actually, yeah it is bulky it takes up less space then a regular floor jack if you travel, just have to remember to grease the threaded shaft from time to time!
@Cheepchipsable2 жыл бұрын
Seems very useful for older people.
@ckelley872 жыл бұрын
Yeah, I thought this was a miss - your car probably already has a manual scissor jack or something near a spare tire (or space for a spare) so it wouldn’t take up much room at all, maybe just get rid of the hard case.
@isaiahjohnson25322 жыл бұрын
I would totally take that jack. You guys at donut can send it to me!!!
@alexbuchanan26052 жыл бұрын
I have two! Great for lifting a car in a tight garage where you can’t get leverage on a longer jack bar. A bit slow, but faster than a traditional manual jack of the same type. Love them!
@rhyswilliams48932 жыл бұрын
It takes up as much space as the jack kit you get with the car. Nothing worse than twisting up a manual scissor jack on rough asphalt
@timkern4622 жыл бұрын
The $10 impact wrench is listed now for $91.
@peterparker92142 жыл бұрын
Of course it is they had to raise the price after Donut media gave them this glowing review!! 😂😂😂
@Anonymous..VQ3.5Lg35 Жыл бұрын
Lmao great buy still clearly 😂
@travkeyes Жыл бұрын
the tool kit is 40$ now as well
@drummajorgirl Жыл бұрын
Donut tax
@Aliyah_666 Жыл бұрын
@brent randall What does biden have to do with this....i swear he's gonna live rent free in all his haters heads. You say his name like it has relevance..😂
@membranoid2 жыл бұрын
The air diaphragm is likely screwed in place for shipping like my soldering station's heat gun, look at the bottom for the bolt that needs removed.
@ZTenski2 жыл бұрын
Exactly. Didn't read the instructions. It'd be pretty hard to make a bad plasma cutter, there's not that much to them.
@chopshopchopper2 жыл бұрын
I would never buy yhis thing. But if i somehow receved it for free I would take the time to see if I could get it working...
@dswmetals022 жыл бұрын
Yeah obviously the airline is plugged somewhere so it's probably literally a 20 second fix like pulling a stopper or a plug or a screw out
@CraZY.pRIME.2 жыл бұрын
That was probably the missing plug for the valve, you take it out from one spot and put it there.
@HerecomestheCalavera11 ай бұрын
Yeah it is really annoying that they made no attempt to try and get it to work. Almost like they wanted it to fail.
@jbarzee00012 жыл бұрын
The impact wrench is indeed $10, but they left out the fact that the “shipping” is $90.
@NonBinaryBisexualAdhdAgender2 жыл бұрын
Yep. Or you could pay more for cheaper shipping. The same item at 90 dollars would only charge 11 dollars shipping. Lol, but sadly true
@dchawk812 жыл бұрын
Or that it didn't include batteries.
@TomsShedProjects2 жыл бұрын
Nope
@dalionsouled2 жыл бұрын
I have the electric jack and for those of us with bad backs its a life saver. I've never regretted buying it and it fits in the trunk of my grand prix just fine
@WHATDATTOOLDO2 жыл бұрын
You can get a nice hydraulic one with a long handle that will last forever for 150$ ish bucks at harbor freight...
@dalionsouled2 жыл бұрын
@@WHATDATTOOLDO Long handle jack isn't so convenient for lugging around in the trunk
@josephsalter8282 жыл бұрын
The “Jobe” swish threw me so much I genuinely laughed way more than I should! You two just work together so well!
@yiorgosroumeliotis64612 жыл бұрын
I would love to see donut make a crossover episode between the wish tools series and the car giveaway series where the contestants would need to fix the cars with cheap and terrible tools...
@Heratiki2 жыл бұрын
High/Low Tools Edition
@theepicgaming52602 жыл бұрын
@Deto Qcney just make them wear weld PPE
@shawtybae58542 жыл бұрын
13:26 I HAD A HEART ATTACK
@ShawnsTrains2652 жыл бұрын
Kinda feel bad saying I have that yellow electric jack, but it works great and super convenient especially when you get a flat in the city. Fits with my tire kit great in my trunk. Keep it with me all the time. Love it. Recommend it.
@ShawnsTrains2652 жыл бұрын
@koiun dwrru I've used it a hard dozen times. It's been very consistent and handles my car just fine.
@kevinfrey14352 жыл бұрын
I thought it was weird that they trashed it after proving it works much better than they expected.
@ohshucks71562 жыл бұрын
It's faster than a regular jack
@charlestimmons6042 жыл бұрын
I wouldn't trust it enough to roll under a car unless I braced it with the harbor freight jack stands I got from a pawn shop but I could see it being pretty handy
@tau12usr852 жыл бұрын
@@charlestimmons604 you wouldn't need to get under the car to change a tire, and if your doing car repairs you always should use jack stands and tire blocks.
@giga92932 жыл бұрын
Love when you guys pump out content keep up the work!
@AustinDouglas75 Жыл бұрын
3:23 The battery gotta be at 25% now 😂😂
@c.shannon39142 жыл бұрын
I like how it looks like you're spooning at 6:36. Very sweet. Plus Jeremiah is dreamy 😂😂
@ItsNuxFury2 жыл бұрын
They're both dreamy. Uh oh, I sense a lemony fanfiction developing somewhere. 😬
@c.shannon39142 жыл бұрын
@@ItsNuxFury yeah they are, but in that case Jeremiah was the little spoon. Lol
@ovni2295 Жыл бұрын
My experience with these sorts of products is that they DO work, but they have almost no durability. Need it once? You're fine. Need it a hundred times? Maybe get your tools from somewhere else. EDIT: Also, sometimes the factories in China produce name brand tools, then produce the *exact same tool* for another brand. All they do is change the stencil and box. That's probably why that sander they used was comparable to the Bosch sander they showed - it IS the Bosch sander, just with a different name.
@timkenda82032 жыл бұрын
The "Jobe" when shooting the battery in the trash really caught me off guard lol
@MitchMcLean2 жыл бұрын
but it was gold
@FitmentIndustries2 жыл бұрын
Hey, for a cheap sander that was pretty alright! -Edgar
@colton48052 жыл бұрын
Okee dokee
@shadypalmtree29892 жыл бұрын
I wouldn't be surprised if it was an unbranded Bosch. Like how companies will sell models to more well known companies and they'll just slap a name on it.
@robertmyles91242 жыл бұрын
@@shadypalmtree2989 It's very common in grocery retail. Having worked in grocery for over a decade, it's become pretty easy to tell which products are rebranded brand names. For example; most grocery chain's store/private brand 24 pack drinking water is actually Deer Park water. It comes from the same exact bottling plants, on the same exact bottling lines, using the exact same water. The line doesn't even stop to change labels. Each bottling run let's say a thousand Deer Park branded bottles are filled, directly followed by a thousand Kroger branded bottles, then Walmart etc etc.
@barge76192 жыл бұрын
@@shadypalmtree2989 I doubt it is a Bosch. Don't be fooled by the color. Tack Life is owned by Aukey. Tack Life/Aukey used to sell these on Amazon, until they got caught using a paid reviewer service to place fake positive reviews for their Tack Life products. At the time they were selling them on Amazon, you could find about a half a dozen of the identical same sander being marketed under different "brand names", each with a different color. This is the same identical sander being sold at Harborfreight under their Bauer name, which are Red. If anything, these are just re-badged Harbor Freight tools.
@davidroberson19622 жыл бұрын
I'd use the $10 impact to take bolts out when disassembling something. I have a dewalt impact drill that I use currently. I'm sure that would work in it's place. What does it weigh?
@FUNKER4202 жыл бұрын
No. No it wouldn’t. It would break remember u pay for what u get
@siddharthiyer11202 жыл бұрын
Mad respect to the editors, really make the humor work!
@CodeR3d9112 жыл бұрын
I actually have that same jack, got it from Amazon though. It's fantastic to take on car trips for emergencies. It beats bringing the manual pump or using the factory installed jack. We actually used it on our aluminum car trailer and it did the job well. So I would recommend it honestly. But, since you threw it away, I'll gladly recycle that for ya.
@jtunedproductions48182 жыл бұрын
Exactly, they acting like they really enjoy using the og jack over pressing a button
@quillmaurer65632 жыл бұрын
I figure it wouldn't make sense to carry with you due to bulk/weight, but would be a nice thing in the shop.
@jtunedproductions48182 жыл бұрын
@@quillmaurer6563 the factory jack takes up almost as much space. I bet you it will fit where that one goes.
@wfaddah9 ай бұрын
Thanks
@mattstarnes20062 жыл бұрын
$10 "impact" I'd gladly break it loose by hand and zip everything out. I got all Dewalt stuff now but back when $250 was alot of money to me I would of loved that thing
@Cheepchipsable2 жыл бұрын
Seems like it's best function. Still for $10 what would you expect.
@Animallover2332 жыл бұрын
Seems like what it is, just a stronger ratchet
@quillmaurer65632 жыл бұрын
Agree - not suitable for "heavy duty" stuff like a good impact, but a very convenient light-duty tool. Not a replacement for your Milwaukee impact, but - at times - a faster alternative to a ratchet. I'd totally use that if they gave it to me, I have a corded impact I use sometimes but the cord is too much bother in some cases so I just use a ratchet - this thing would be great from a convenience perspective.
@andrewbrinkworth14202 жыл бұрын
This has definitely become my favourite show from donut the chemistry is on point and it's genuinely unpredictable every episode, and to me that's what makes the best episodes... Keep up the awesome work.
@Kefka2010 Жыл бұрын
For $10 I feel like comparing it to Milwaukee is wrong. That's a tool to use around the house for odd jobs and not the shop. $10 for an impact that can remove a lug is a keeper. That's a new, frugal homeowners dream.
@LorandHungary2 жыл бұрын
My only issue with this kind of series is that shipping cost isn't included. Since it doesn't matter if something is 1$ , is shipping costs 100$.
@Outwardpd2 жыл бұрын
Shipping is complicated because sometimes they'll offer free shipping and sometimes the shipping costs are negligible with a large enough order
@tiloalo2 жыл бұрын
@@Outwardpd no it's not the issue. Here the seller lie on the price by making the object 10$ and the shipping 200$. The plasma cutter for example is clearly not worth just 30$, but it's just a trick used by seller to get a better ranking.
@loganries70662 жыл бұрын
Usually on wish the shipping is actually a good price, usually less than 5$
@james-hb5tu2 жыл бұрын
@@loganries7066 The shipping on the impact was $90
@captaindelta432 жыл бұрын
This testing things from different sources is by far one of my best donut media series ever . Love them trying and reviewing these stuffs for our knowledge and entertainment.
@Cheepchipsable2 жыл бұрын
Problem with the "reviews" is that they are just showing their bias and lack of imagination. Most of the stuff worked fine, but sure you wouldn't use it every day in a workshop...which is why it was so cheap.
@ScarabChris2 жыл бұрын
I was surprised by the electric scissor jack. I wouldn't trust it to lift the entire rear end of my Escalade but to lift one wheel at a time....I think yes. Also when doing oil changes just to get a little extra ground clearance to access the oil pan and filter. I think I may look into one....but a better quality one. Honestly I didn't even know these existed. I guess I'm old school....I roll out the hydraulic floor jack for everything. LOL.
@TheNiteinjail2 жыл бұрын
The $10 impact wrench could be the basis of a ton of d.i.y. projects tho :)
@PaletoB2 жыл бұрын
Like a electric scissor jack 😉
@jeremiahhendricks18502 жыл бұрын
Or a tool for kids
@SWISS-13372 жыл бұрын
"we got the biggest toll in the shop, Jeremiah!" Jeremiah, waves and smiles whilst the camera is on him, then his smile contort slightly before the shot ends, rage un-containable. Plotting his revenge.
@goodcitizen37802 жыл бұрын
6:20 Too funny. Never saw you guys before but I like the show. Thank you
@trail-wolf4x42 жыл бұрын
I think the Plasma Cutter deserves a second chance!
@Loebane2 жыл бұрын
Same - I'd totally watch a video of them trying to get it working.
@1pcfred2 жыл бұрын
I'd love to see what's inside the case. I think it was just a factory reject. Those things are nigh on impossible to fix when they croak. They weren't designed with repair in mind.
@superhawk200022 жыл бұрын
There are internal air adjustments. I had the cut50 and upgraded to the 220V version. And have been using it for about 7 yrs. They are a little temperamental, but with a little practice (and patience), they've cut everything I've thrown at them.
@zachc12972 жыл бұрын
I bought one of the electric jacks from Harbor Freight after the Ford one bent changing a tire on crap ground. It actually worked for what I bought it for, only to change a tire on roadside issue. I think it was $50.
@darkhillseuropeanmountsLLC2 жыл бұрын
I would have loved to see the plasma cutter working
@mr.waffles87392 жыл бұрын
Honestly I'm tempted to buy that orbital sander, on very very rare occasions I think, hmm I wish I had an orbital for this instead of my palm sander so this might fit the bill for me
@AnhH882 жыл бұрын
You better off buying a used one on Fb marketplace. I had a 20 bucks black and decker and it lasts forever.
@thcenterprisellc1122 жыл бұрын
I think you send the plasma cutter to AVE for an in-depth tear down ,great video
@1pcfred2 жыл бұрын
There's a guy here with a channel called DiodeGoneWild and he knows his electronics. He'd either get it working or figure out exactly why it can't work. But he's in Czechoslovakia. So shipping it to him may be hard. Mostly he just reviews crappy USB chargers though.
@junosmodel3LRchannel2 жыл бұрын
7:26 I love how he carefully puts the scissor jack inside the trash can 😂😂😂😂😂😂 he probably wants a refund.
@kirkmorris97612 жыл бұрын
Thanks Jimmy for your hard work and dedication to the Donut team!
@REDW1NG942 жыл бұрын
The tack life stuff isn't too bad. When I went to aviation maintenance school, several of my classmates had tack life welding helmets, and they worked great and were surprisingly tough
@BRBTechTalk Жыл бұрын
14:54 $30 plasma cutter should have taken the cover off to see what you got for $30. Was it just a box with dials and switches?
@ModifiedMotors4U2 жыл бұрын
the thing is, we have a lot of burner tools like theses at work (crap tools u dont care to trash) stuff like undertrays ect the impact would be good as u wont de-thread them and the junk tool box would be great to have when u need to hammer stuff, i may actual buy that impact would be usefull when i dont want to break things
@randombuilds83362 жыл бұрын
The jack would be good for someone older or disabled. Combined with an impact and some people would be able to change a tire when they normally couldn't.
@chickenpotpie792 жыл бұрын
But if they’re old or disabled how they got change the tire after its up lol
@randombuilds83362 жыл бұрын
@@chickenpotpie79 impact or torque multiplier to do the lug nuts, lots of elderly or disabled can move a wheel, but don't have the hand strength to run a jack or lug wrench.
@osiris04132 жыл бұрын
As a handy but non-professional guy the most useful advice I got when it came to tools was: start with the cheap stuff, and when it breaks replace it with something better. I'm not a carpenter or contractor using this gear daily. Every year I might do a handful of jobs that need specialized electric or air tools - unless I'm using them every day, the cheap stuff is still going to last me for years even if they wear out way sooner than the professional grade. Anything I use enough to wear out quickly, I replace it with something mid or upper grade. The things they "trashed" here would still all be worth holding on to if you didn't have anything better, and using until they failed.
@shaneh75192 жыл бұрын
I partially disagree. I guess it all depends on how much you would plan on using it, but even the average homeowner would probably use something enough to make it worthwhile spending a bit more on something that will last all your life, instead of just a few years. You don’t even need to get the super expensive shit, but why pay 10 bucks for an impact that might last a few projects when you can pay 80 bucks for something that will actually last. Buying something you anticipate will break is stupid and wasteful. In both money and now you’re contributing to more junk being thrown into landfills
@beardedxj2 жыл бұрын
This is becoming one of my favorite series you guys have done.
@zymeon2 жыл бұрын
open the plasma cutter case up, see if it's just a fan and weights or if they actually tried making something that works.
@danielevans6578 Жыл бұрын
Props to Jimbo for being able to stand on that tiny peg. You da real MVP.
@BPBomber2 жыл бұрын
Glad you uploaded today. The days when donut is silent is always a bummer 😆
@jacobwcrosby2 жыл бұрын
They left out all of the shipping costs. Shipping is often more than the item itself! Pisses me off how they misrepresent wish as cheap, when it absolutely is not.
@FokkerBoombass2 жыл бұрын
That $10 tool set is another reason why it's INEXCUSABLE for a household to not have a basic tool kit. I know too many people who call expert help every time a smallest stupid thing comes up that only requires a simple tool and a google search at best to sort out.
@Mrturbocorona2 жыл бұрын
Was actually hoping the plasma cutter would work love these types of videos keep up the good work lads
@Alternate_Ending2 жыл бұрын
yeah i was sad they didn't try to trouble shoot it. it powered on maybe the plug for the regulator was on the end of the hose or something... i dunno. I mean the sander they didn't even plug in at first.
@quillmaurer65632 жыл бұрын
I have a supposedly similar plasma cutter (looks similar, says "Cut 50," but is blue) that works reasonably well. Can't do a lot because if I turn up the power much it pops the breaker, but that's not it's fault, if I had a higher-current or 220 outlet I bet it would do quite well. They gave up on it way too quickly, should have troubleshot it a bit. They were ready to declare it junk as soon as they heard the price, didn't give it a fair chance.
@mantisushi2 жыл бұрын
I'd keep that electric scissor jack, perfect for tire changes
@AtomicLimelight2 жыл бұрын
i agree. i feel like they were harsh on the jack for no reason. trunk space and weight isn't really an issue if you're driving a normal car, especially for something that size. i actually want one lol
@MrTyler1896 ай бұрын
"It's on, it's got a fan. This thing's gunna cut." 😂
@patty5782 жыл бұрын
I turned on a drill from wish. It started a time loop that I can’t get out. I’ve been living this same day over and over again for 15 years now.
@GilgameshEthics2 жыл бұрын
hmm
@rosenevil742 жыл бұрын
I bought a discount tire inflator once. The second I turned it on it started smoking.
@muaazmasood11012 жыл бұрын
Well. You got a cool ass smoke machine then for your car.
@shannacollins47412 жыл бұрын
Ive got one of those that is so fire! Lol uhh yeah mine started smoking right away also even tho they aint same brand probably but yeah cheap air inflator = smoke!
@robertmiller83029 ай бұрын
Casey, this video is how it was at the begining. This is what i like to see. Yes the tracks did good also. But the old air down way is the best. Keep the vidoes coming.
@davidkatze29212 жыл бұрын
I can vouch for tack-life actually making some pretty decent power tools.
@pleappleappleap2 жыл бұрын
I *totally* would take that impact wrench. Would do great in an emergency.
@akarne76682 жыл бұрын
I couldn’t find one for 10$ feel like they faked the prices or something because I found none of those items, realistically they’re great for thag price
@bdeoleveira81102 жыл бұрын
Annoyed me that they called in a impact driver and not a impact wrench
@edgarorelldd2 жыл бұрын
These two are my favorite from the channel
@chefcc902 жыл бұрын
Why you gotta do Jeremiah dirty like that? He's not a tool, he's a treasure
@CaptainFalcon922 жыл бұрын
Tacklife is actually good stuff for the price imho. ain't so cheap in general. Got a 40$ torque wrench from those people, works fairly well and is accurate enough
@Haywood-Jablomie2 жыл бұрын
Tacklife is a budget price mid quality brand in many Eastern countries. It's really good and the prices are great
@TwenOalley2 жыл бұрын
Chinese products have gotten much better these days, even the really cheap stuff.
@LukasBulevicius Жыл бұрын
Guys please make more of these videos :) with love from Lithuania 🇱🇹
@wal2 жыл бұрын
Seems like you are taking a real gamble with WISH and people should just pass. Thanks for showing us what’s up!
@tubewatcher972 жыл бұрын
its encouraged me to go there to look fo accidental quality bargains!
@DJPhantomRage2 жыл бұрын
How about some wish amplifier tests and reviews?
@SpaceAgeConsulting2 жыл бұрын
I've bought a few different Tacklife items off of Amazon and have liked them all. Had some over 2 years without a dip in performance. Good product at a very good price.
@KyuubiNaruto41 Жыл бұрын
I have the tool kit bought it off Amazon awhile ago because my other tool kit was in disrepair. Haven't had problems with the set other than the thing you pointed out when first opening it, yes the sockets do frequently fall out.
@jed-henrywitkowski64702 жыл бұрын
While I find that Project Farm has a more scientific approach to testing and data collecting, you guys have a more fun approach! I do like both canels, btw.
@bunzeebear29732 жыл бұрын
Check out AVE or Boltr on YT You never see the guy and he tests the schit out of stuff. & he dismantles it too. Canadian humor. New, and he takes it apart.
@Banks2312 жыл бұрын
I have a similar impact wrench, compatible with Makita battery. with right battery, it can easily break ~120Nm wheel nuts
@aaronong51462 жыл бұрын
TNice tutorials tutorial was so easy to understand. Thank you so much!
@Holtenstein2 жыл бұрын
That’s funny, the 198 piece tool set I was totally thinking of leaving at the girlfriend’s mothers house. Totally worth it
@YFBDJ2 жыл бұрын
I bought that orbital sander from Amazon a couple of years back. Cost me much more though...wish I'd gone to Wish! Either way, it was still cheap and I've used it for hours continuously on many different jobs.
@tiloalo2 жыл бұрын
It's also not 10$ on wish... They got played by seller displaying a lower price by exploding shipping cost.
@Seabass12062 жыл бұрын
10$ for the took kit was an absolute steal
@sarukun12282 жыл бұрын
Since the sander looks identical to the Bosch (and wasn't junk), my guess is that it was one that Bosch declined for whatever reason, so they just sold them unbranded
@medes5597 Жыл бұрын
It doesn't even spin the same way the Bosch does.
@lukesnukem17w282 жыл бұрын
I'll take the plasma cutter. Might not take much to get it to work. Would be a fun project to me.
@GeTtHeDoG18832 жыл бұрын
Built the whole steering setup for a racing mower with about a dozen 12mm Sidchrome ring end spanners I flogged from work many years ago. Could never throw a tool away, but then again, my shed is full to the brim with odds and ends.
@LunaticTheNick2 жыл бұрын
MCM fans be like "IN THE BIN!"
@zeekfarrongaming53022 жыл бұрын
I’ve bought some cheap hand tools off wish for my garage and honestly they haven’t done me wrong yet. The best ones I bought was a trim removal kit that came with all kinds of push pin remover tools for $3 on Wish and it was so worth it
@Cheepchipsable2 жыл бұрын
Petty hard to mess up those kinds of simple tools. It's complex electronic stuff I probably wouldn't buy.
@ObeyDeFi4 ай бұрын
4:12 he's like dude don't throw it that hard, we're not actually throwing it out
@JorgioBeckett2 жыл бұрын
Break open the plasma cutter to see what's up. I'm just curious now. I remember Mighty Car Mods bought a "chip" and found it the chip had no data to actually do anything but light the little LED light to "signal" it was on. It was just a simple closed loop circuit 😄.
@BR-ik4qh2 жыл бұрын
I have bought a few tack life stuff on Amazon. They have been good. Much better than expected
@XaoFakeNick6 ай бұрын
I got jumpscared with the tongue plasma thing... hahahaha I'm so dumb.
@Dabbindru2 жыл бұрын
Calling Jeremiah the biggest tool in the shop is an understatement
@ChrissClutch2 жыл бұрын
“Well, You wanted more air time, this is what you gotta do!” 😂
@ParkedUpAnywhere2 жыл бұрын
Technically…wouldnt Jobe be the biggest tool (in a good way) …being a mechanic? Haha.
@jeremyprunty61942 жыл бұрын
The problem is is you never know what you're getting from wish
@michaelcleary70652 жыл бұрын
Ive been using a couple tack life tools for about 5 years now. Surprisingly reliable for bargin bin tools