Sharp LC-40LE185M Turn on W/logo and turn off. how to fix

[@dysanchez1416]

Salmat kaayo sir kay nasulbad ra jud aq gi trouble same model..☺️☺️... More power sa imong chanel💯💯

[@mandliksharad04]

Thanks Sir I solved the problem of sharp tv to watch your channel Thanks so much

[@murargujar5588]

Same problems I'm facing sir thank you so much for great experience for your video.

[@Parthiban.c1973]

Thank you very much sir my customer tv had the same problem i fixed the tv with your guide video

[@الكترونياتمتقدمة]

من سوريا تم تطبيق الخطوات على شاشة لدي رغم ان الترجمة لم تكن دقيقة وعمل التلفاز لدي بشكل جيد تحيات لك وشكرا لجهودك

[@PassmoreHamunji-cu4gy]

My man you are just a super genius keep it up

[@hkgnlivetv7528]

thanx alot i appreciate your good knowledge i got same problem now i solved as your video thanking u

[@srujanjagannadha]

Sir this is difculat complete.but your completed the work .

[@SONNYemc]

Thank you so much sir, I tried jumping to the service menu without desoldering pin15, It works for now, but still testing it anyway, If that fails I will let you know ❤

[@shreelakshmielectronics3824]

Super sir my tv is working very fine thnks for ur information

[@shaunkumarasamy1718]

Thanks for the video, however in my case the TV does not turn on the backlight after push the joystick button up, down and up. Instead it flashes green and orange. Any advice most appreciated.

[@arnelmole2529]

Same here

[@lakshmananlakshmanan1009]

Thanks yesterday same model same broblem i watch this video set ready.

[@lebronmalakas8685]

thank you thank you thank you it works!!! same model Sharp 40 Le185m aftee on show film in 5s then off i did what you show and it works! god bless im now subscibe your channel!

[@tevzTVTevatronics]

salamat sa pag sub

[@murargujar5588]

Outstanding information fanstic present great 👍🏿

[@brianjames6890]

I have a Sharp 40BL2KA that as soon as I connect to the mains the standby light and backlights keep flashing on and off. Please any suggestions as to what the fault maybe? Thanks in anticipation. Regards, Brian 👍👏🏴󠁧󠁢󠁷󠁬󠁳󠁿👍👏🏴󠁧󠁢󠁷󠁬󠁳󠁿

[@AshokvidhyaAshokvidhya]

Thank you for your video

[@joselieniloganarial7357]

Gud job bosing.

[@สุพัฒน์มองทัง]

Good great best job thanks for sharing 👌👍🏾👍🏾👍🏾👍🏾👍🏾👍🏾👍🏾👍🏾👍🏾

[@vikassripada9244]

Thanks man, resolved using your technique 😊

[@aldreipola.pilotin1410]

Thank you so much po😊

[@kapanamixtv3214]

Thanks this tutorial its me a lot

[@rktechnology3887]

Thank you sir, 100% ok solotion

[@newdjiskaproaudio1910]

Mantap ilmunya bozz..👍👍👍

[@yaseramar2038]

Good jop many thanks

[@manuelponce3994]

Saludes desde Honduras.... Maestro gracias sus videos son de gran ayuda..... Dios les bendiga.

[@tevzTVTevatronics]

God bless you

[@briliandt]

Привет бро! Я из России и тоже с удовольствием смотрю господина Тевза 😊👍💪🤝

[@mallikarjunnagannavar8747]

Sir thank u very much sir same problem is in 50 inch sharp tv driver ic is BD9415FS for this any solution sir please sir

[@amitsable5794]

Great knowledge❤❤❤

[@JK-Real-Science]

Good work 🎉🎉

[@tevzTVTevatronics]

Thanks 😄

[@ansonthomson3070]

Sr thanks my tv working ok

[@michealbright8257]

nice video.....very helpful

[@manojgajpal4302]

Yes its working thanks

[@arvinalmerol885]

Thank you sir.working

[@jbgrenouille2527]

I appreciate a lot for the help, the tv is now working, but there is a new problem, the tv turns on by itself even when I remove the batteries from the remote control. and another symptom is that when it turns on I already forget all the configurations

[@tevzTVTevatronics]

Did you change the other cofiguration on at the service mode?

[@jbgrenouille2527]

@@tevzTVTevatronics I have not been able to enter "service mode" I do not know the method

[@johnconner8379]

Same as me.... Auto turn on... Can't turn off

[@johnconner8379]

I found file below... How to update ? Just plug in to the TV ??(in setting click update?? Can fix auto on (problem)?? Pls reply Thank

[@jbgrenouille2527]

@@johnconner8379 Greetings and blessings, I am the same as you I'm looking for solutions

[@selvan221]

Super sir

[@gabrielcuevas5837]

continuamos, saludos amigo

[@jimzmutia0729]

Thank you sir

[@novemberrainfall]

Naglaeng ka nga talaga lakay

[@VinothKumar-zb1di]

Well👍🏻

[@davidpringlepatrick4262]

Tevz, how did you know that the jumper went to the main board

[@frankmwakugu-hr7pp]

Hii Tevs. Where can I get power factor correction IC

[@tevzTVTevatronics]

try google it

[@hanzoassassin7055]

Thanks

[@xxgachamelissaxx9945]

Thanks for sharing

[@tevzTVTevatronics]

Thanks for watching!

[@munir4100]

My TV same model i try already like you show in this video but now my tv light up led green but monitor blank screen black

[@tevzTVTevatronics]

LED bulb issue...

[@Swenser]

Was the solution found in sharp service manual? My guess is TV manufacturers will be locking mainboards into fail mode in the future and repairs won't be possible. Much like lithium BMS boards when they fail. Just so they can sell more TVs. This will be easy for companies to do because governments are not controlling right to repair.

[@lifeai1889]

Just use a universal board

[@rtmubarak8297]

❤

[@anibalgutierrez2654]

I have a Sharp 4T-C70BK2UD with sound distortions and beep sound. Do you have a video on this model on how to replace that board to fix it. Thank you in advance for you help.

[@tevzTVTevatronics]

No video yet to that model. Try sound setiing.

[@anibalgutierrez2654]

@@tevzTVTevatronics Thanks Sir. I did that but it doesn’t fix it. Does the sound is a independent board or part of the mother boards? Thank you for your kindness. May God bless you.

[@laccktv]

Sir have a good day,,i have aquos sharp lc40sa5100m,,the issue is when i plug it,the indicator green light is on while redlight is blinking continue fast,,i try to put a new one back light and then reset,but the issue is steel there,,please forgive me,what can i possible to,thank you❤❤

[@jbgrenouille2527]

Greetings, leave my like to the video, I'm looking for an update or a full-flash of the tv model: LC-32LE185M "SHARP"

[@tevzTVTevatronics]

You need bin file of LC-32LE185 M?

[@jbgrenouille2527]

@@tevzTVTevatronics yes i need it

[@jbgrenouille2527]

@@tevzTVTevatronics Please, I need it to fix my parents' TV, they are elderly, after a power failure the TV stopped working

[@tevzTVTevatronics]

@@jbgrenouille2527 drive.google.com/file/d/1fhkRlHxCDWr2IvxrKUndMaB7dE3nhj1n/view?usp=sharing

[@jbgrenouille2527]

@@tevzTVTevatronics Thank you !! I thought the memory was 64mb

[@amreabdo3864]

🎉🎉

[@jamesaparecio7656]

New sub bossing, ty

[@myflexibilitychallenges2496]

Hi! Full support !!

[@tevzTVTevatronics]

Thanks for the visit

[@RajasundaresanRajasundaresan]

அந்த ஜம்பரை மீண்டும் என்ன செய்ய வேண்டும் மீண்டும் சால்டிரிங் செய்ய வேண்டுமா

[@mehaboobattar6461]

How fix mapping problem.please inform

[@maneshmurali9087]

👌🏻

[@ahmadkamal6826]

👍👍👍

[@iForgoT0002]

hi po pwede po mag tanong, Yung TV po namin LC-32LE185m Pag sinasak po nag Automatic On po siya wla po siyang redlight Pag in off naman po namin thru Remote or Switch nya sa likod Balik Turn ON po ulit siya and lahat po ng Set namin sa Menu naka reset lahat..

[@tevzTVTevatronics]

Malamang memory or firmware ang prblema.

[@das-electrotech.]

Tnx for sharing master..sub is done..

[@tevzTVTevatronics]

Thank you too

[@levi7076]

boss naa koy ps4 nya dili makita homescreen sa TV hdmi cable nya blackscreen ra sya nya mo blink ug input 1 hdmi 1080p 60ghz unsaon ni?

[@mistarizotto]

Hello, love your videos, can you please show another videos with the same TV if it's cannot turn off and when we try it's stop then restart again with all settings reseted.

[@tevzTVTevatronics]

Yes I will make if there's another repair like you mentioned

[@mistarizotto]

Thank you so much. I discovered that the TV can't go standby but instead it's going standby reset.

[@raw3040]

I love this stuf. Its Just e giant puzzel. 😊🤗real good work. 🤗

[@simonebulzomi2391]

Good job, many thanks!

[@tevzTVTevatronics]

Thanks for watching

[@Zhaoto47]

Any solution for ps3 no display sir same tv model

[@fahmicanaries89]

Hi. How about if ‘sharp’ logo came out and tv can see for around 1 minutes then its restart?

[@soemyintaung845]

[@cherrylyndiano5825]

Hello sir how about when noth9ling appears on the screen same blinking problem but the sharp logo doesnt even appear on the screen when turning on. What should i do?❤❤❤

[@elektronickejora554]

Ilike

[@rafaandromeo]

Nasa howmuch po kaya paggawa nito boss

[@tevzTVTevatronics]

Mga 1500

[@fadishow2]

sharp lc50le458x tv the leds start for 3 Seconds and tern off how to fix power supply

[@julamellacaya3597]

Sir baket nag ka ganoN..yong saken same model lang base sa vedio mo pa olet olet kong pena panood ....pena letan ko yong shorted na LED .. DEn after konang mapaletan ...genaya kona yong sa vedio mo .. hang gang sa pag open lang ng service mode dena ako naka proced kase beglang nag shotdow..nawala yong desply....nag green nalang yong indicator light...den nag green red ng yong blingk

[@tevzTVTevatronics]

Baka may pundi pa

[@amadorbarra3607]

I made the reset of 0 its working but afterwards it blinks again what is the remedy.

[@ProwlersPit]

I have a Sharp Aquos 3D TV 70 in. It has one yellow line going down the left side. Except for the bottom the last 3-4 in fluctuates. The TVs are 2014 or 15. Everything else works great. Just said that annoying thin yellow line going down.lol

[@sorrawatmankit2599]

lc-40le185m schematic diagram please

[@jbgrenouille2527]

in the model: LC-32LE185M "SHARP" The size of the flash memory is 64mb or 8mb ?

[@tevzTVTevatronics]

If the EEPROM is 25x32 is 4Mb, if 25x64 is 8Mb If 25x128 is 64 MB. see your EEPROM

[@jbgrenouille2527]

@@tevzTVTevatronics Thank you !! I'm going to check it and tell you, although we live in different time systems (time zones). I am very grateful to you! 👍👍

[@tevzTVTevatronics]

@@jbgrenouille2527 IC 25Q64 EEPROM is 8 MB

[@jayronabayata6807]

Hi sir my tv is LC32SA4500X

[@jayronabayata6807]

Does the process you have shared will work on my tv version LC32SA4500X?

[@phallatep2274]

For me it's still the same can't go to service mode

[@arnoldjrludovice4473]

sir bat ganun ginawa ko po itong vid. nyo sa tv ko, gumana naman po sya kaso di tumatagal nasisira po yung backlight nya...

[@tevzTVTevatronics]

try mo yung 2watts na led

[@jepidzpido9696]

@@tevzTVTevatronics boss pano Malaman kung ilang wattage Ang backlight?

[@MohandAdel2299]

The same model works for a period of time, then turns off, then turns on after a while, and so on

[@tevzTVTevatronics]

Not in the description of this video, maybe the main board has the problem.

[@MohandAdel2299]

Yes, is the problem with the board?

[@tevzTVTevatronics]

@@MohandAdel2299 Is the audio also turned off with the video?

[@MohandAdel2299]

Yes, it turns off after thirty minutes of starting. Turns off completely, then lights up green and red@@tevzTVTevatronics

[@tevzTVTevatronics]

@@MohandAdel2299 The main board or the backlight is the problem.

[@ansonthomson3070]

But 72 volte coming

[@zennaaaddee]

Did it another beand

[@simantachakma6548]

oh god i really upset!

[@sunsys0]

fake video, not possible at all, either he has worked at sharp service center or some sharp technician helps him or he has the sharp service manual for this model, either way he is not telling the viewers the truth, from where does the fault voltage come from that he grounded or where does it go nothing he said what are we to make of it, sorry tevz down vote given to you again 👎👎👎

[@tevzTVTevatronics]

OK, thaks for watching do.

[@prakashkumar-dz1qb]

Thank you sir

[@yaseramar2038]

👍👍