TFT Retrofit Installation. Step by Step on P3 Volvo. Do it!

[@BertHoltappels]

Thanks for all you do. I prefer reading instructions over watching videos. But you are a massive exception!

[@volvosweden]

Thx so much Bert. My Starbucks coffee tomorrow guaranteed :)

[@maxmimum]

Greetings from Bahrain. I have 2013 xc70 and I like your channel so much. I appreciate your commitment and dedication to capture DIY upgrades you have to your sweet Volvo. I had tailgate module, Trunk new module and in middle of the interior LED light installation. Thumbs up and have a great weekend.

[@ahmedbaluchi199]

I have volvo s80 t5 2012 and wanted to install 2014 dashboard display what shall i do? Shall i just put it there or need to update the software and add more wires or what ?

[@eliashadjari4224]

Did it few weeks ago on my S80 2.4D 2010. Decoding the CEM took 18hrs and for some reason it did not work out at the first time so I had to do it again. Price in Vdash at the time was 199€. Very good and extremely helpful video, thank you for making it!

[@kmorton54]

I I really enjoy and appreciate your videos. Having just purchased a 2011 S80, I will be using your videos for service, cleaning and upgrading. Thank you

[@magnushansson3570]

Nice video👍🏼 Greetins from Volvoland Sweden

[@alessandroscialanca9241]

I’m wondering to see you change the suspensions on a Four-C D5. Thanks for your sharing works. It’s a real good job

[@Volvoxc70SWE]

So nice to finally see a video from you! Great that you show everything here👍

[@Yenko1992]

I am considering getting a 2013 t6 and I definitely would want to do this modification it looks so good

[@MrLeeboy88]

Amazing guide, easy to follow. The best tip were the nosepicker, to put the pin into the connector. 😊

[@mikeMBW]

Will have to add this one to the "to do" list. Thanks mate.

[@pe9042]

Would love to do this on my V70 T6 AWD 2010 but I would never dare 😅 Excellent video 👌🏻👌🏻

[@Alexander_l322]

I am seriously toying with the idea to do this to my P3 V70 but I need to get Vida and dice along with the TFT so it’s not cheap to do this and then I have to fit it and hope I can make it work properly.

[@jimftr]

When you say "twisted wire pair, do you mean, soldering a long piece of wire to the red volvo terminal cables, and then twisting the wires coming off that down to the OBD wires? Just a bit confused there.

[@DrDodge24]

The CEM decode on my S80 only took 3 minutes! I guess I was one of the lucky ones, haha

[@GabrielGames100]

how do you like the new cluster?

[@kobewatkins2640]

How much was it

[@endurocrosser8834]

ZNormT6 How much was the cost?

[@DrDodge24]

Enduro Crosser the cost for what?

[@endurocrosser8834]

ZNormT6 For the decoding.

[@balmerlawn]

Great video and great upgrade , but for me I’d trade my car in for newer model with this type of dash as std . However not that important to me so I’ll keep the old fashion version ! Like I say 10 out of ten for the effort and skill shown here . Another great vid by this chap

[@volvosweden]

It's definitely a personal choice. With my milage there is no reason to get rid of my XC70.

[@thomaslieven8447]

Im amazed. Awesome work. A lot of time went in figuring out how to do this I suppose

[@2304markymark]

Very Nice and usefull video!! Thank you!! What was the price of the software you had to buy for the TFT ?.

[@metsa12]

Yes, Im curious as well, how much ? €€

[@EduardoArsaniSantos]

Thanks from BRAZIL 🇧🇷!

[@remyslosberg7313]

Are you supposed to connect the negative clamp to the negative terminal? I've seen elsewhere that you're supposed to connect it to unpainted metal away from the positive terminal to make sure you don't cause a fire from the fumes or something. He shows it connected to the negative terminal so I'm just confused on which way is the proper way.

[@GerardB2023]

Hi there, did you ever find out?

[@twiggy9000]

Nice video. The 2 wires from OBD to the display. Are they needed? Or what do they actually do? Installed the TFT display without the 2 wires and it seems to work just fine. Fuel gauge is not correct, but I haven't gone for a test drive yet.

[@wieslawstachelek]

hello, when you installed new cluster, have you used the same OBD device or have you used different one or (if you know) can I use wireless OBD?

[@quadtraxxx]

Your videos are absolutely brilliant, really great video shots with mounted camera, always clear to see exactly what you are doing, with very clear instructions! Top marks! Thanks for sharing 👍

[@volvosweden]

Thanks for the feedback

[@robertepagerp]

Great video, I am currently doing the upgrade. Can I ask that you do a video installing the driving / Spot lamps you have fitted . Regards Bob

[@edwardharvey418]

Hi. I have seen a couple of other videos where people have just plugged in the new cluster and not changed the software and some things don’t work. Does absolutely everything work in this for you, including the eco gauge on eco mode? Do you have a video showing every function working? Thank you.

[@samjackson7701]

Did on mine, now I have DIM error no DIM detected... but the replacement works. It looks amazing but I do not know if I will keep it because I cannot reset the clock or maintenance so it tells me every time I start the car that maintenance is overdue... when it is not. 2011 S80.

[@_Everyone__]

Seriously, I was expecting to see the final result for a while longer....and see the changes with before/after comparison, for people who doesn't know those models.

[@csebastian71]

Vdash seems to be the only way to add heated seats to my 2009 XC90 V8 RD.

[@SergeiiCZ]

is that twisted wire really important to work? did you try to use normal wire too? thank you

[@peyoush]

There is something else that can happen. After everything is insalled properly, the car might not start. It says immobilizer active. The only way to get the car to start is to put the old dim in, start the car and then switch the dim again while the car is started. Problem fixed. Did it on my S80 V8.

[@endurocrosser8834]

p.dutt When swapping dims,do you need to take out the two wires soldered before or they remain in the same position?

[@DakahriGT]

I got the v8 too hows the dash holding up was it worth it?

[@gettyjim588]

Hi : Thanks for all your videos 🙂 Doesn't matter here what is motor code or gearbox code ? Also I have navigation screen in my volvo but without touch screen or car play... can I upgrade to touch screen ? My from 2012 D5 THANKS 🙂

[@poyeep6123]

Hi. Any chance this can activate tft cluster in volvo v40 2016? Thanks.

[@tomzamir2621]

Same question

[@trungle9923]

Did this to my 2012 S60-R with a 2016 S60 TFT. I just added 2 wire, i didn't need vidaduce or VDASH. Everything is working except for the power level gauge.

[@jokullmtl]

really? no need for VDASH?

[@jchaparro97]

Very Good video. I follow all the instructions and it is working but the only think is that the speedometer is in miles (like it supposed to be because I am in US) but the odometer shows in kilometers. And I ask the people from d5t5 to help me fix that, but I guess they are too busy. You probably know. Or you may tell me how can I reverse so I can put the old cluster back. I did try to go back and install the old cluster but it didn’t give me the option. Thank you. I hope you can help me. All your videos are really helpful.

[@zsakfosh]

HI! what's that green switch on your steering column cover?

[@dobrien757]

It is for the HELLA fog light

[@bv8612]

Thanks for the interesting video. I have a 2007 Volvo S80 and would like to install the newer analog display. Can I just swap that in or do I need the software for that as well?

[@nicufrasineanu4596]

Hello ,I appreciate all yours videos,can you put the link where we can buy vida dice,or the one that you have?Thanks

[@alexrozenblum9837]

Hello. Can you help me please with this job. I'm from Winnipeg and going to do it. Can I ask you few questions, thanks.

[@volvosweden]

Email me at [e-mail] and I will give you my number .

[@alexrozenblum9837]

@@volvosweden OK. Thanks. EMAIL sent. Thank you.

[@erosas887]

Amazing video man! You help people a lot.

[@Snoopmasta]

Love the idea of the upgrade and would consider it if it were perfect afterwards. Sadly the compromises are to much for me. For the money to invest into this I'd like it to be fully functional.

[@lcheater]

What gauge wire do I need? And why does it need to be twisted?

[@charalamposgkiatis5241]

Great video tutorial. Is it necessary to remove the horn fuse..? If it's not removed what will happened?

[@endurocrosser8834]

CHARALAMPOS GKIATIS The car will sense low voltage and the horn will start.

[@patrojas2575]

Great tutorial!!!! Easy to follow. Thanks.

[@pascaljarry6362]

Hello from France. I have a volvo v70 2016 model. Thank you for your videos. Do you know how to stop (shut off) the Security belt alarm please.

[@alainouellette8660]

Great job. What is the product number of the cluster ? I cannot find it on the Volvo parts website.

[@nf9584]

I have xc60, 2009. Do you know does it work on my car, so i can go to shoping parts🙂, and whether it shows when the light bulb stops working and the like, i didn't understand it best, also when the door is open does it show on display. Like your videos very much, thank you.

[@timonkovar5194]

Where in Vdash did you manage to change the Theme to blue?

[@bolrag]

I always watch your videos and find them very entertaining and educational. I wanted to ask you if you have installed Android car or apple car in your Volvo? Greetings from Chile 

[@bostjanreseta3046]

why do you need to remove the wires if you give the old counter back? I have already wired the old counter that is in use, I already have a new counter in the garage ... dice comes in 14 days .... but the car works without problems with these wires (xc70 MY12)

[@Augis8600]

How you changed servise interval?

[@mat7350]

Great job. Is there also information about how much petrol car take on this tft speedometer? I can see only temp..

[@nestorgeloca7881]

volvosweden ,what color of the positive wire in reverse light for xc60 2011?..thank you..

[@FidelCashflow69]

I just tried to crack my ECU on my P3 S60, and there must have been an update because every time I walked away or shut my hotspot off, VDASH had an issue

[@joshuaarcher2257]

Can you put this in a s80 2008 ?

[@pillowdawgi1314]

Hi, i have XC60 -2010 year. Do you think that the tft will fit - start working on the same way as in your car. Thanks

[@KingPOF]

Wondering if this will work on the S80 V8

[@tonywiklund7941]

I am a little surprised that nobody wants to talk about how much the software costs

[@volvosweden]

150 and 250 $ depending on year

[@Andysanche]

$280 USD! little bit disappointing to find that out after spending a couple hundred on a TFT...

[@jonasboinay]

@@Andysanche the worst part is my fuel gauge worked on the new tft BEFORE I installed their software. $139 US LATER and no fuel gauge. No response to requests for support.

[@jonasboinay]

Guys and Gals. I have to retract my earlier comment. It took awhile, but I think Pavel works solo so understandable, but he did get back to me with a fix on the software side which worked!! I guess my experience is the rarity. usually this TFT replacement procedure works on the first go without a hitch. But either way, D5T5 followed up and made it work! Super happy, Pavel is awesome. Highly recommend doing this........

[@paulspark7287]

@@jonasboinay I hope he can help me out - VDash can't detect my new TFT DIM at all, so 200 Euros later I cannot complete the process..

[@chrisweeks6561]

I have this fitted to an S80 I brought, can't figure out how to change the time

[@andrebraga]

I'm interested in buying a 2007 v50 t5 ( P1 platform ) in good condition, there are some for sale here. And i want to upgrade to the digital panel on it. Its possible? Congratulations on the content Hugs from Sao Paulo Brazil

[@fitnesscaptain7175]

Hello , is it possible for my 2013 v40 ??

[@myroofproject4232]

hello may i know how much it costs? € ? and how low will it take for installation? may I also address?

[@nilaya80]

If you install this TFT, can a Volvo dealer or workshop clear service light, or is this only available for purchase in VDASH ?

[@BikingNL000]

What are the costs after unlocking the CEM? I know you said the price might change, but the website says nothing about this all. I am looking to do this upgrade, but don't want to do all the work and buy the unit to then discover a huge amount of money to do the upgrade

[@lcheater]

£120

[@jkfc99]

Hi, beforehand many thanks for your videos....i have a question, i did the installation but for any reason, the DSC control is out of service...i try to activate it but the check dissapear 1 second after the activation...i'd like to know if you know what is the reason of thisd issue.. i appreciate your help in this matter

[@jkfc99]

anybody knows how can i fix this issue?

[@juusoparikka2143]

Does the parking heater still work after the retrofit?

[@JP-lz4fp]

Is the adaptive cruise control working?

[@tthebigg120]

Do I need to do all computer stuff for make it work or can I just do all wires stuff and make it done

[@ariergarda2004]

For a 2013 S60, will it work by just removing the old cluster and fit the new one? Do I need to complete the whole process? Best wishes

[@cardealertools]

Very nice Video! I see that CEM decoding takes some times for P3. Is that same as SPA/CMA platform. If so, is there any way to improve decoding process.

[@rockeysingh9429]

Hi I don't have option on my v70 2015 to change instrument cluster's colours(thems)

[@robertasviskupaitis9195]

how much did vdash cost to decode and program tft to the car in total?

[@COCOLISO6021]

Hello my frind, great videos, I have one quetios, I have a volvo xc60 D5 2010 planning to updrade the virtual display, which year should select ? and do you have the link where to buy it

[@MrJustinsideher]

What where the steps like in the tft software? Is the old cluster the most time consuming part, that cracks the cem, is that before step 4? Does the dim code go away when complete? Is the new tft loaded after step 4, is it a long process, did u get a message once or twice about a volvo dealership and getting locked out due to using unsanctioned hardware?

[@91cat]

So my p3 v70 my 10. Will my powergauge work? The text says no but your car is 09 so it mite work, idk

[@danielq250]

Hi does anyone know what amps details etc this red cable is ? Thank you to anyone that can help 👍

[@lasseolsen2764]

Nice video👍 i have a xc60 2012 D3 2,4 summum do i need to download all wath you did?

[@don.agassini]

Electronics related question: If I change the light switch from a 2011 S60 to one with "Auto" position (from facelift models), will the "Auto" function work out of the box, without any other wiring or software? Thank you!

[@johannessoonik1007]

2011 didn't have dedicated DRL so it would do nothing even if the auto worked. I once swapped an "Auto" switch from a 2014 V60 to my 2008 XC70 to see if it activates foglights as DRL like on new XC70s, nothing happened, low beam in all three positions (0, Auto, Low beam).

[@don.agassini]

​@@johannessoonik1007 Yes, I'd be expecting DRL lights not to work (as I don't have any), but since on "0" I have low beams turned OFF, I'd expect them to come ON in low light, as the car has a light sensor near the City Safety camera. Also, on V40 models, when driving in shade or cloudy weather with "Auto", the parking lights switch ON in order to have the the tail lights light up and more visible. So on "Auto" I'd expect OFF lights in daylight; ON parking lights in shade / woods / sunset, and ON low beam in low light.

[@anonymanonym7907]

Question: The TFT Retrofit Speedometer fitted in my S60 2012 and worked without the additional cabels. Now I selled it to another person with a 2013 Volvo S60 and for him the middle Display stays black. Is that a known issue?

[@dummag4126]

If it is insinstalled in a v70 2014-2017 will work all function or remains limitations?

[@victordoldor6302]

Is DICE version 2014D going to work?

[@yahyas]

I see a lot of people doing this without vdash update and working straight away. What is different in their car?

[@Mrawelon82]

Where do you see that?

[@endurocrosser8834]

Yah Productions Some of the functions will not work.Some just soldere the two wires and everything worked. It’s up to luck.

[@maheshchauhan9290]

I have a Volvo V70 B Diesel 2009. The front left headlight pop up washing has broken. I would appreciate it if you had a video showing how to replace this. Any chance please?

[@tranceorkester]

Does anyone know what happens if you plug in the TFT speedo without doing the cable mod? Should it light up at all or be dead? Just received a TFT odo for my V70 2013 that lacks the two extra leads, plugged it in just to see so it works - however nothing appears, connecting the original old odo back still works fine. Will know for sure once I receive the terminals from Volvo later this week. Would have assumed that the TFT is powered the same way as the original odo, unless of course the two new leads provide extra power or some new voltages.

[@Voidedsins]

Would this work on a 2013 xc90?

[@rehmanmalik8986]

Hey are you going to retrofit xenon lights?

[@jarosawstelmach5022]

Hey, i have a problem with power gauge, it doesn't move at any time, do you know what could cause the problem? Thanks in advance Volvo S60 2.0T 2011

[@paulfrancombe]

Fantastic stuff ! Do yo happen to know if you can do a retrofit on a 2011 C70. Thanks again!

[@kaka12z22]

its possible with XC90 2013 ?

[@Angloman516]

Can you confirm after conversion the TFT digital cluster duplicates the display and control of those cars equipped with radar for active cruise control and variable distance alert?

[@2Awesome4People]

Hi, does the Instrumend lighting adjustment still work with this cluster? driving at night with that bright screen could be tricky

[@SchwinnStraight8]

So i notices it says DSTC may not work...can you still turn off traction control on your car to get the tires to spin in snow? that would be the only downside for me.

[@wieslawstachelek]

Question about Volvo dice, can I also use other alternatives or it has to be the one you've got (even it is Chinese knock off) as I have seen other devices however, I am not sure if it will be good to use?

[@veresscsaba3837]

Hi, I Have V60, year 2012, 1.6 diesel. How possibile to check the engine temperature in the older version? Thank you

[@MrValeyfabio]

Hello, Can i Change display 5 inch for a 7 inch in Volvo V40 2013?

[@jahwanzadavis]

Hi how are you,, question is D5T5 is like vivda from volvo, can I use this Instead of Vida, I want to thank you for your help on all your post on KZbin

[@jonasdromberg4365]

I want to do this on my v70 2012. But why is the tft program so expensive. It says 200 euro excluding vat. Then the cluster another 300 euros.

[@misiomisio2335]

Excellent , spasiba !!

[@glaurrung]

hello ... I would like to do the same in my volvo v40cc but I can't find the repair terminals. Will you know where to find those terminals with shipping to Chile? thank you very much

[@MrLeeboy88]

Can you do a video, how to motor optimization via vdash?

[@newfladorian]

Can I retrofit this on a 2008 xc70? It is however in miles per hour, I'm wondering if I can install similar but in kms

[@ArnoldClarke]

What is the green switch on the steering column?

[@GerardB2023]

Anyone else getting a constant beeping sound coming from the engine bay when you put it into ignition 2. It doesn’t stop. Like a sensor going off or something. Around the air flow box or very near. Any thoughts. When I turn off it beeps for 10 sec then stops.

[@ricardocestari7453]

Após realização da troca não apareceu o nível de combustível. Qual a solução?