Thailand Longtails in the USA brought to you by Beaver Dam Mud Runners

Overview of Thai Longtails and how they work- brought to you by Beaver Dam Mud Runners
Learn about the Thai Longtail design and why it is so effecient and simple. It has been around since the 50's or 60's in Thailand. Longtails have been around since air cooled engines were invented. They have been in the USA since the late 1800's. They work great for shallow water, muds and weeds. Great for fishing and duck hunting. Simple to fix and simple to build. Work with a standard air cooled engine- Predator, Honda, Etc.
Purchase Mud Motor Kits and Honda Longtails here -
www.BeaverDamMudRunners.com
Questions and Orders Here Also-
Phone: [phone]
Email: [e-mail]

[@rangerdanger126]

Nice video BD. For my Jon boat I went with the larger Beaver Dam kit and the HF 15.8 HP motor. Took a little time getting it dialed in, but I'm very happy with it. The Beaver Dam owner, Mr. Robert Milner (here in the video) is First Rate! We were in constant contact via chat and calls, as I dialed in my set-up. Since I'm tall, and the distance to my transom and the first bench seat is a little far, I ended up having them make me a longer handle. Now I'm very comfortable as it runs through the water. I'm looking for to Ducks and Deer this season. Did do a little fishing out of my rig also and discovered I needed a long paddle in the boat to help me get away from the shore, the docks, and structure at certain times. Rangers... Lead the Way!

[@moodyfishing21]

I got a 22hp preadtor beaver dam kit my issue is my motor won't go as fast as it should like I got the throttle all the way I've adjusted the throttle cable doesn't do anything

[@danietkissenle]

So is any one putting 4bt cummins tunes up to 400 hp in ther boats in the states

[@grindfestoutdoors]

Great video.

[@jessevangerven2911]

I’m looking to put a 22hp on a 1648 or something similar, do I need the 100” shaft or can I get away with the 85” shaft? Thanks

[@rrmilner]

You really need a 100in shaft

[@318alano]

Would you recommend a long tail on a 1652 tunnel hull?

[@jonboyd4094]

I have a 16 foot boat with a 20 inch transom. The boat is mod v with 42 inch bottom. Would one of these kits work?

[@rrmilner]

Yes, it will. You might want the 100in shaft. You might get away with planing tabs on an 85in shaft. We are out of stock of the 100in shafts and will have some more in April.

[@blueridgedsia]

the ones I seen run a turbo diesel and run like a bat out of hell.

[@Aaronb1222]

What size is the shaft length I don’t see it on your website

[@rrmilner]

100in on large kits

[@derrickhamlett512]

Do you carry the throttle linkage kit for a 79cc predator engine?

[@rrmilner]

Yes, call or email us to order- [e-mail]

[@sbranham86]

What's the shortest shaft length available on the large kit?

[@rrmilner]

We sell a 65in but highly recommended NOT to get it. It comes with a 100in shaft and that is what we recommend.

[@miguellovino7679]

CAN YOU PUT A BRIGGS & STRATTON ENGINE IN THIS KIT OR IS ONLY FOR CHINESE ENGINE

[@rrmilner]

Yes. Email engine specs or call to make sure

[@miguellovino7679]

@@rrmilner THANKS.. FOR THE ANSWER... THE ENGINE IS A BRIGGS & STRATTON OLD SCHOOL 5 HP

[@MrDavidelliottjr]

35 briggs with 100 inch shaft.

[@karson7413]

Any tips form keeping the weeds off the space between the prop and the bushing

[@rrmilner]

3 things- PVC between the prop and the bushing, make a weed cutter and get a weedless prop

[@rrmilner]

weed cutter can be made out of a piece of steel. Use a grinder to make one side sharp. Drill two holes in the skeg and piece of steel. Mount it so that it cuts the weeds as the shaft turns

[@karson7413]

Robert Milner you should make a video on this it would be very helpful also when will you guys be back in stock

[@rrmilner]

Karson we are back in stock

[@user-py1hz9ik2i]

While watching a boring video, the milk turned sour