That Smart K’ar Swap is Looking InSANe

[@jennyloughry896]

Love the vibe of this channel

[@goatslayerwp]

Boosted Bois, Cleetus, and Father Timing belong together all the time.

[@markyfrencho]

Cleetus said he was building them all shops at the Freedom Factory.

[@jamesblanton9364]

Also don't forget the PFI bois. So it'd be the 4 amigos.

[@charlieburton9967]

Pfi get added to Boostedboiz when all together

[@Cekmore]

Dont forget Mother Boost!🔥

[@AnDrEw122100]

Father timing still kills me 😂

[@neong]

This smart car joint build is my favorite thing on KZbin right now.

[@stashtrey1]

Me too. Can't wait to see the more in with the turbo plumbed out.

[@Prado805]

Most definitely 👌🏽

[@jonlaws4493]

Not project Binky?

[@VA-ng2ve]

I vote the guy doing all the welding gets to drive it first.

[@baysidefabrication]

V A I’m right with ya man!! 😂😂😂😂

[@ZILAwelds]

@@baysidefabrication and the guy who delivered the welding machine gets to drive 2nd .... lol

[@VA-ng2ve]

@@baysidefabrication Him, Brent, or Cleetus. That's my top 3. Also want to see what kind of lap it can lay down at the FF, as well as 1/4.

[@baysidefabrication]

V A I’m sure we we’ll hoon this car every where we can. Keep watching. This car is getting even crazier

[@NickKautz]

Shart Kar

[@johnmoniz2715]

When Laz is looking at the wheel flare and a big smile just comes across his face!!! 😁 Great work guys!!!

[@thatautogarage3644]

The Acura wheel like good along side the smart front wheels. Love the positive vibes Brent brings with him everywhere he goes. Fasterproms seems more productive now!

[@Roarman57]

Ya the five lug vs the front with three😂

[@johnarrington5522]

Brent, I think your track wall impression requires a PFI sticker and signature!

[@SethBergile]

If that were Kyle's project it would have been running 2 episodes ago with 2 lugs per wheel and a booster pack bungeed to the top of the motor.

[@PSNxFTWxRAGOI]

if it was one of kyle legit builds there should be at least 10 intercooler videos lol

[@d.c.dawkins5470]

You mean running with no coolant in it, the wiring done with old speaker wires, and the no possibility of it ever being actually finished?

[@TheYummyBrand]

With half the welds finished

[@brutalbasspro]

It was cute when they were doing it on the red hatch. Now its annoying to watch them ruin built motors and sequential transmissions (ie the hondaru issues currently) from being sloppy.

[@Prado805]

Mr Marcus i don’t think it was sloppy work , it’s just that it’s never been done before, there’s obviously gonna be some bugs n kinks with something that doesn’t belong together ya feel me

[@MJTAUTOMOTIVE]

Hey Brent, I liked the Wayne's World reference thrown in there. I spit my Coffee out. You can always lift a person's day. Thanks Brother. Stay Safe. 🤘🤘🤘

[@Cekmore]

Subtle but Real!👊🍻🐈🔥🔥🔥🔥

[@MJTAUTOMOTIVE]

@Benny T. I will have to go back at rewatch this movie now. I remember when it first came out. F☆ck I am old.

[@thedude7726]

@@MJTAUTOMOTIVE same here bro.

[@victor440_]

That's what friends do that is awesome, so much input from each other it's turning out so good 👍👍 hell yeah 😎💪

[@ripnsoar]

You’re killin it Brent!!!

[@MrLipp24]

The interlude with the Dog, cracks me up!

[@chaseplumlee5123]

Doggo video transitions are the best

[@fillg]

Reminded me of the old school Batman transitions

[@brians48now]

@@fillg I really hope that he will keep the Batman transitions for a long time. Puts a smile on my face every time.

[@jonnothetrucker]

Loved seein Laz's look of satisfaction firing Uncle Sam up

[@Yanco0O]

you should put sheet metal inner wheel well so you can blow every tire you ever put on it no harm to anything ...

[@izzyplusplusplus1004]

I missed this comment, and said the same.

[@NickKautz]

@@izzyplusplusplus1004 It's gonna need more than sheet metal , the australians pack the backside with cement. I guess wheelspeed is a factor

[@izzyplusplusplus1004]

@@NickKautz Yeah, it needs something. What about roofing spray foam encapsulated by two layers of sheet? Might be lighter than concrete...

[@NickKautz]

@@izzyplusplusplus1004 Pretty sure the concrete weight helps to generate more smoke and crazy entries

[@izzyplusplusplus1004]

@@NickKautz Yeah, that's good sense with a front engined car, but this is a k swapped rear engined smart car. Already the weight loading is gonna be like 25/75.

[@kodymcmullen5691]

This is gonna be so cool when it's done. Brent always killing it.

[@bobbystalder3323]

Brent is a true MacGyver of this stuff!!!

[@damnitbobby8438]

Thank god mechanics are essential, you guys are keeping me entertained thru all this corn teen stuff

[@Octopod40]

Nice Job Guy's. Hey Brent, been missing y'all video's need more of it plus i know you guys working hard on the cars to get ready for the drag race we need more videos. keep up the good work buddy you guys are awesome.

[@balljointfd3s]

Love it! Brent isn't even dynoing the car and Jamie comes in to give feedback. I commented before that it was like in Colorado, seems like Florida is the new Colorado. Either way you guys are all kicking butt and it's awesome to see some vids. Thanks guys! Keep it up!

[@danielcluley870]

This build is so sick. You all can do great things when you put great creative minds together with a bit of experience and a crazy idea!

[@AnDrEw122100]

This thing is gonna be so sick , im pumped for this thing to be done !

[@dandel351]

KZbin needs a new system where you can like a video more than once. This build rocks!! I can't wait to see what it looks like finished. There is not much left of the original car now. I still want to see if that crazy wheelie seat thing fits on the back and if anyone is mad enough to ride back there with the K series in there...

[@maxium4x4]

One funny crazy build, nice to all of you come together and make it happen. Stealth went out the window a long time ago but the Dyno run should be amusing. 😁

[@TheTuttleCrew]

Brent and Jamie Happy Easter guys thanks for the content!!!

[@MrMadkaw400]

Ben is killing it

[@XJAYARE2Xx]

Awesome content! Team work makes the dream work 🤙

[@darylnicklen3685]

Thanks Brent great video watching you all collaborate on this build. Special shout out to Ben Crushing the fab work. Little Aussie Follower ....

[@ThatV12MiataBruh]

Load Kyle's MR2 moon tune to this pocket rocket

[@CaptanTaco]

That V12 Miata Bruh I think it would blow it up.

[@PSNxFTWxRAGOI]

@@CaptanTaco if they get a built engine in this thing i bet it could run a low 10 or a 9

[@josecoreas554]

PSNxFTWxRAGOI a stock k24 would run 10s on this, weighs like 1500 pounds

[@jesseosterhout907]

HELL YEAH BROTHER !!! Came to the dance with cleetus, leaving with Brent and Kyle... weird bro..... haha !

[@watahyahknow]

i agree that the rear fenders will probably be schredded once the tires let go , might be a good idea to hide some trailerfenders on the inside bihind the plastic , maibe a dual axle type fender cut in half , and use one half for each side ) weld them to the sheetmetal behind the bodywork , either that or bending up some 4mm sheet steel intoo a halfpipe to put back there anything that pvents the bodywork from being hit directly , you going to need some protection inside behind the driversseat anyway the rear bodypanels arent that big maibe you can have them made in fiberglass and keep the moulds so you can build more as youre probably going to go through about 3 sets per event might even be possible to build simplyfied versions out of sheet steel (bend to shape body panel with fenderflare weded on ) one think you might want to look intoo s if the toyota front brankes and hubs can be made to fit the smart suspension , then you can mount toyota wheels all around

[@Bot_Brad]

“Looks like Laz got it all fixed up” Awesome 😎 UncleSam rolls by then you see the TRUNK.😂

[@mattprovost9878]

Such a rad co-lab!!!! Real life Monster Garage!!! The knowledge and talent of all of these teams, all the way through!! Let's go brothers!🤙🏼🦅

[@JonathanSias]

Love the Adam West transitions!

[@ike8236]

Love the editing on this one Brent, keep it up man your vids are keeping me going in hospital. No I don't have the Rona.

[@twotut2002]

Laz kills it... Much respect for that man!

[@havingfun8192]

As Cleetus and his crew grows this content gets better and better. Absolutely loving this build! Never watched much PFI stuff before but now im a new sub. Keep this stuff coming!

[@oscarbarrera6924]

Im the other way around...been watching pfi and boosted boiz for the longest now i just subed to fasterproms and cletus channel lol

[@paultaylor9939]

The build and the brotherhood thanks for sharing guys cheers

[@jaredthisdelle5617]

Great work guys everyone there cheers it's a team effort for sure and that's what makes it sick

[@ericpettyfishing]

Wheel spacers. This thing needs to be as wide as possible!!!!! Its gunna want to roll ! I am so excited to see this thing finished! Its gunna be a beast!

[@PreacherwithoutaPulpit]

That little beasty is definitely not going to want to stay rubber side down. Me thinks Wheelie Bars are going to be a Must. This colab is so damned cool as I get to watch Brent the Honda Guru and one of the most positive/nice guys on the planet and Jeremy Father Tune himself putting their heads together to bring us something on another level. These two teams working together could probably get us back to the Moon... P.S. Here's to the first 8 or possibly 7 second Smart Car to ever be built if you have someone crazy enough to go that fast in this little beast. With Ben's cage and all the years of knowledge going into this build I'd do it I'd happily be that crazy person..

[@PreacherwithoutaPulpit]

Had to add as beautiful as that SS is I'd still rather have the Smart K Swap. To actually own a piece dreamed up and built by these two teams would be amazing...

[@kevins.3573]

0:00 "Hey, guys." Chris Fix, here.

[@colinsmith2423]

I thought the exact same thing.

[@Lezly]

I came down to comment the exact same thing as soon as i heard it 😂😂

[@Sil3ntSnip3r]

Love this build. Cant wait to see it RIP!

[@TheHoosierDrifter]

I love you and Laz... very enjoyable and heartwarming

[@rubenbraekman4515]

Brent: "Good job Ben, we're all proud of you." Everybody liked that

[@dereklancaster2303]

Some custom fender flares and it will be so freaking awesome!! I'm loving this

[@j.t.r.8087]

Uncle Sam and Neighbor are like a real life version of a decepticon and transformer. Uncle Sam has a sinister look and neighbor looks like the underdog hero. I love them both.

[@CapitalCarpCrew]

awesome Build...love the hole crew ..!!everyone is grinding hard....this thing needs rendering from LTO with a sick Widebody

[@patricktremblay5890]

Keep up the great work everybody! The best team on the best project!

[@martyg9110]

When you hit the like button before you watch👍

[@jamesblanton9364]

That's what i always do with my fav channels, and have done for years mate.

[@Matty.Hill_87]

Kyle's idea for those rear top strut mounts turned out awesome

[@babyjake6695]

22:28 looks so pissed that he has to help. Lol

[@hanssgarage1886]

The Smart looks great! Congrats, 250t subs. Huge number!

[@hardbodyruckin]

The oem smart car wheels are staggered. Putting the old rears on the front will help widen the front.

[@baysidefabrication]

del_troll we did that already. Went from a 165 tire to a 185 I think 😆

[@peterwall737]

I'm in the UK and I love it 😎

[@DetroitMuscle440]

Laz with the morning Reservoir Dogs reference. Well played sir.

[@RODZILLA65]

The cart is looking very Smart!

[@ettumama]

I so want the Freedom Factory Smart K'ar sprint race! Even just 25 laps

[@burningdaylight1085]

This has to be far and away the most fun anyone ever had with a smart car! ;0)~

[@allandale1018]

Never thought i would ever say a smart k,ar looks cool lol, I would not be ashamed of driving that one good work cannot wait to see it running

[@lazylizard6532]

Loving the Holly/Batman transitions!

[@nathandy2683]

Lovin the content Brent, audio & visuals on point.

[@Tampaboys]

Man really awesome progress on the smart car this thing is going to fly rock on 💪🙌👏

[@johnnyg9507]

Get that Motor in already! lol, cant wait ta hear that tune! Great werk yaw!

[@bobgreene5460]

Badass build for sure, hope Wheelie bars are in the budget.

[@kariannestudeman1909]

For sure Bob Greene, And parachutes to bring it back down safely after they launch it!

[@MatthewMiller716]

I was thinking they could build off the back tabs and utilize a system like the BoostedBoiz wheelie bar setup on the golf cart

[@stashtrey1]

Frigging love this project. Can't wait to see that thing do it's first burnout.

[@pFbSpecV]

Glad uncle Sam is fixed!! Smart car is mind blowing!! I wanna see some wheelies!!

[@NOAHCASAS]

WOW THAT REINFORCEMENT CAGE LOOKS BADA$$

[@bgd5339]

That car is really coming along. Can't wait to see the final results.

[@Justin-hl5zh]

That cage work is art

[@therealspeedracer]

Love the bat dog transitions

[@Prado805]

Yall should do a sheet metal inner wheel well so if you blow a tire it doesn’t damage anything. Repeating one of the comments from another viewer but needed to comment again cuz i think it’s a great idea and should be noticed ! 👌🏽👌🏽

[@theriddlegamer2376]

This smart car brings a whole new definition to tube chassis

[@JT-th5lp]

Out for 6 minutes and 3 thumbs down. Just shows you can't make everyone happy. Keep up the work and goofy is holding it down for your return home.

[@NickKautz]

Out of every 1000 people there's probably 10 idiots that click the thumbs down without realizing it , or thinking it's the thumbs up

[@kevinbennett2565]

It's the ones saying they dont know what they're doing. Those same people have no project cars , or probably anything going on in their life . Let them be 😂

[@jeff-no1lp]

jeremy: "i just can't get it to do a donut!" brent: "say no more"

[@theglitch_713]

If the body dissapears... Call it Sleroy. Lol Also... Uncle Sam should be Uncle Slam!

[@TheBakedAlaskan696]

The Wayne’s world “camera 1, camera 2 reference had me laughing!

[@bensmith4785]

This car is going to be fast. Power to weight wins Everytime!

[@Sypher474]

Absolutely cannot wait to see this thing go for a rip!

[@bjlracer1380]

Smart Kar is the perfect name for it!

[@fergusonhr]

That dampener is a friction fit...the bolt needs to be torqued tight enough to not let the key way have to be pushed against...just like a bridge...the plates that connect the beams are full of bolts but they are all in tension making the plates hold the pieces together in friction...if you loosend all of the bolts the bridge would fail because the bolts would be all in shear and not tension...make sure you torque things like that to spec or they will fail every time...awesome vid guys...keep up the great work...🙂

[@Scootermagoo]

It's also supercharged and the rocking back and forth from the on off throttle destroys keyways, a lot of old school blower builds ran 2 and 3 keyways to keep the pully from launching into space.

[@TheCSHeckler]

Love the idea of putting a front wheel drive set up into the mid/rear position, just like a lambougini Muria which is an E/W V12, with gearbox and transaxle behind. Just like majority of packages produced today making any number of conversions possible.

[@douglasmcclose7773]

its so awesome when sick ass awesome things happen to good people. my guy brent. sincerely luigi, aka doug

[@lengthluther484]

15:03 that’s crazy how they make the heaters now and ac that’s all one unit with everything in one. Way too complicated lol like he said “ damn there’s a lot of wires coming out of that thing “ lol

[@fryreartechnology7611]

Smart car too cool car. That’s really fun looking. You see Mazda Miata carts, old Leroy the savage corvette cart, and some others out there but a easy 400hp k24 swapped smart car is turning it up to 11. Can’t wait for dyno tuning when you’re at 400hp as say if we increase to boost and injectors we can hit 750hp lmao. Hand brake for the front wheels

[@WRXBase]

18:25 YEAH! Gonna need to fiberglass the inside to make it stand up to the punishment.

[@Alexis__0312]

I don't know what's going doors but jime and brand are like the best team ever

[@eddieh9857]

nice work! cant wait to see it run!

[@tat2edtom]

The K-smart is looking sick

[@JasonAJames]

23:12 bet that's toasts new big block ready for all the boost!

[@crippledsteve7724]

Not big enough

[@HunterAtheist]

Insta-liked. I know the video's gonna be a banger like usual.

[@thatautogarage3644]

Hunter Green same thing I do with every single PFI video. Even in Brent’s slow and not doing much videos always kill it. Gotta get that daily dose of infectious positivity.

[@eriklarson9137]

Scooby doo twirly golden for the WIN!!!

[@Xe99]

Finally some good content LETS GO 🇺🇸💪🏻

[@franksdg125]

Lolol. I liked when he wasn't stuck in Florida . I truly enjoy them boys at higher alt

[@-DUTCHY-]

I vote Ben should have done the pedal box as well. It would have been finished by now . 🤣

[@hooviedoovie5220]

I always thought laz and jamie would get along well lol right hand men of the tuners

[@Ryan-wf1mn]

Best collab ever

[@gcode34668]

Brent, any thing your involved in and get to put your genius, insight and thoughts into will always turn out RADICAL. #SWINGINGONBRENTSNUTS

[@matsumoto9244]

The back of the 1932 Packard 903 Super 8 Coupe could be used as inspiration for the rear sheet metal of the Smart K'ar.

[@doctordifferentialspeedsho9506]

Broke my hand and wrist in several different places with a dewalt drill whipping back on me. Learned my lesson. I was 1/16 of a inch off on a pull box.

[@otm646]

I always drill with the torque limiting clutch engaged. very rarely do you need the drill actually set to the drill setting. Almost everyone has transitioned to impact drivers now, that's an even safer way to do it.

[@doctordifferentialspeedsho9506]

Oh i have to agree. This is probably 10 years ago!!

[@Hectorszenshopedc]

LS and K's 🙆‍♂️ perfect video