Shot my Tisas DS carry 9mm and it was a pleasure to shoot. Accurate with low recoil. Not one issue. Changed out my front sight for a green fiber Optic. Staying gun Amish , no red dot.
@matthedrick98743 ай бұрын
What front site did you purchase? I am interested in upgrading irons I am just not sure which ones I should get
@randy4643 ай бұрын
@@matthedrick9874 On Tisas site they have sights for 1911s. I got the green fiber optics front sight and kept the rear sight as is.
@settleschris19653 ай бұрын
Do you carry it? If so how’s the weight?
@randy4643 ай бұрын
I carry my Tisas DS in a sticky holster. The weight doesn't bother me.
@markbroad1192 ай бұрын
No need for a battery to save your life
@HappysJacket4 ай бұрын
I've been beating the crap out of my Duramags with the Tisas 4.25 and they've been money so far.
@aronbennett47604 ай бұрын
I love my Tisas 1911's. I may have to grab the double.
@MichiGUNder4 ай бұрын
I also bought the 17 round and 26 round Springfield prodigy mag and it runs flawlessly
@Razcal1x3 ай бұрын
me too!
@b.c.7313 ай бұрын
I got the prodigy 4.25 when it first came out. Tisas has a lot of good stuff. Bul armory, Apollos, ria and some others now the 1911ds/2011s are in all categories. And getting better by the day. Great prices also. Great video
@sdsimports3 ай бұрын
Great time to be in the market, lots of folks are bringing some cool stuff to the table.
@maddad9mil3 ай бұрын
Tisas runs great I be hearing, Canik too, both companies from Turkey…..I think the Turkish are onto something big here.
@TheRange710 күн бұрын
They have been for years.
@humpy93614 күн бұрын
I always carry a couple wire coat hangers, and a roll of duct tape in my truck, if you do that, you can fix many issues that come up, including your piece of wood.😊
@realtalk61952 ай бұрын
You should also review the Tisas Desperado / Regulator / Stakeout. It comes with both a 9x19mm and a .38 Super barrel in the same box.
@AA-yx2kf4 ай бұрын
Thanks for the update!
@LARPeratorsAnonymous2 ай бұрын
Just found your channel. Great content, great delivery, and well thought out. B roll and shooting is great. Wanting to buy a D9R now 🤣 But being is CA, it would cost $500 more than MSRP because "Off Roster"...... So stupid.
@MichiGUNder4 ай бұрын
I got mine a few weeks ago n love it. I put the cylee cat pro on it n had to take it off immediately. The hood on the cylee pulled all the smoke n would fog the glass so now I have the holoson eps carry and expect that problem to be fixed. The gun I absolutely love I don't have that many rounds shot but it runs amazing. I would 100% recommend this gun
@barrygoodson49523 ай бұрын
How come so many people bitch on here about literally nothing ? This channel gives good thorough gun reviews and I don't see anything to gripe about. Nitpicking like some 80 year old woman. Grow up , get a pair and figure some things out yourselves !
@dannydowell99792 ай бұрын
Been kicking several weapons around…….ya sold me! Great review
@273VIPER4 ай бұрын
I’m interested
@bentleycochran24664 ай бұрын
I bought one yesterday sweet shooting gun
@TheRange710 күн бұрын
I'd gladly take this Tisas over any of the vastly overpriced other stuff out there. The only place where I personally think they fell short on this one, the barrel. A nice bull barrel with a good crown would have aided in muzzle flip (which I saw in this video) Of course that would likely take the price up to well over a grand thus removing the "value proposition" right out of the high value but great price type buyer like me. Not knocking the muzzle flip by any means. In order to not have any or minimal requires a near perfectly balanced pistol. When you add the term perfectly balanced to any pistol the price goes up exponentially. For me this would strictly be a range or club sanctioned competition pistol. I think it's way too big and also heavy to use as a carry pistol. The shooter was putting 99.8% of his shots in the A zone, so we know he's an excellent marksman, to say the very least. Thanks for the follow up RDR. If I do buy one, I'll be ordering my holster from RDR for sure. Cheers
@rdrgear10 күн бұрын
@@TheRange7 very well written, I hope to see on you more reviews.
@searchBLOC9413 ай бұрын
Did you know that those Wilson Combat bushing compensators fit on these? Curious to see how they run with one and a 9lb recoil spring.
@Razcal1x3 ай бұрын
I have an EGW bushing and a guide rode, and they run great. Didn't change the spring
@searchBLOC9413 ай бұрын
@user-yp6xm6om5y I haven't picked one of these up yet, but I'm thinking about it. I have a Prodigy with all EGW internals and an Atlas trigger. But I'm curious to see if there are any gains on the Tisas if a comp is added.
@brucehightower68134 ай бұрын
I'm hoping to get one myself I keep hearing good reviews on them
@fattigla4 ай бұрын
Thank you for the update!!
@MichiGUNderАй бұрын
Yup badass
@Thomas-vt7cz4 ай бұрын
Hello buddy how are you? I have my eye on this pistol to be my project pistol. I was looking at the MAC DS and the LFA DS but I'm leaning towards the Tisas DS duty looks like the one you have there. 😎
@silverlionblades4 ай бұрын
I have the Mac 9 the Tisas duty DS and also the LFA Apollo and the Apollo is better then the other 2 hands down. Better trigger smoother and flatter shooting and feels way better in hand. But to be honest if possible save you money and buy a staccato it’s sooooo worth the extra money. You get what you pay for and none of these 3 are even in the same realm as the staccato. 🙂👍🏼💥🇺🇸
@Thomas-vt7cz4 ай бұрын
@@silverlionblades I have a few high end 2011/DS pistols. I was looking into a project pistol I refuse to spend money upgrading a $2500 - $5000 pistol, not happening if I spend that much I want them to keep their original character... 😎
@rich19584 ай бұрын
Since I live in commie 10 rd state I am eyeing up the 1911 version
@LightofRyga4 ай бұрын
Abiding by commie laws makes you a commie yourself
@Razcal1x4 ай бұрын
The 9mm Stingray is very smooth and mine came with a 3# trigger....don't know if they are all like they but they are well made CNC so you can expect the best I think
@wolftactical54213 ай бұрын
Good on you for showing the malfunction but shame on you for not talking about it. Full transparency is always good when it comes to gun reviews even if it is slight.
@chrisonorato9137Ай бұрын
What front sight did you replace the factory one with?
@ajh1905Ай бұрын
It’s between this or the Springfield
@gutWrench9mmАй бұрын
What you think
@TEXAN_SHADOW20 күн бұрын
Prodigy all the way. No comparison
@TheRange710 күн бұрын
100% Tisas for the win. Apples and Oranges.
@Milkman35720003 ай бұрын
1911s were designed for FMJ BALL ammo. How are these guns With JHP?
@rdrgear3 ай бұрын
1911’s have been running JHP for decades. I have not had an issues with any brand of pistol epically 9mm
@tattoochef4 ай бұрын
How many failures to feed/go into battery was there after the 1 in the beginning?
@rdrgear4 ай бұрын
That was the only one.
@Razcal1x3 ай бұрын
I haven't had one on either of mine, got the carry and the Nightstalker.
@Orcus10304 ай бұрын
1911/2011 guns are not built to swap slides. Makes me wonder what the slide to frame fit on these is like. Any feedback in that regard?
@rdrgear4 ай бұрын
These are series 70 slides. The same side is used for both the single stack and double slide. It’s a 750 dollar pistol. Slide to frame is what you would expect. Slide to frame fit is a topic when you are getting a pistol made for you. Production pistols will always be in the “ok” they are pats being assembled.
@Razcal1x3 ай бұрын
I have swapped Tisas slide between pistols with no difference in function.... they CNC them so they are all pretty near Identical.
@socmonki2 ай бұрын
1911s were originally supposed to be able to be part swapped and still function. They never fully achieved that, but you could take slides, and barrels and mix and match and have functioning firearms. They were not intended to be tightly fit pieces of art, but functional, reliable weapons. Slide swapping between this and other Tisas 1911s is no issue because they are not tightly fit, but they are functional and reliable. Loved my Stingray, sold it to get both B9R doublestacks. They're great, and that's coming from someone who also has a Platypus and a Prodigy. Hands down the best value on the market for a doublestack 1911.
@Razcal1x2 ай бұрын
@@socmonki every Tisas I have has good slide to frame fit, and three of them are excellent, I put EGW bushings in them and they have zero rattle... I am very happy with my DSs and my SS carry ...Ultra high quality for a budget price. (they have all run flawlessly too with the exception of a 9mm carry, it had extraction problems which i fixed with a Wilson bulletproof extractor)
@socmonki2 ай бұрын
@@Razcal1x my Stingray was tighter slide to frame than both my doublestacks, but my doublestacks arent bad. They just have "battle rattle". Barrels lock up well, and they are smooth. In comparison, my Platypus is tighter but still a little wiggle, and my Prodigy is the tightest even after a ton of racking and some shooting. Best trigger goes to the Platy, with the Tisas guns in 2nd because they are identical. Prodigy is slightly heavier with a little creep, but still excellent. IMO, if you want a good quality 1911 style gun for not much money Tisas is the way to go.
@andreblanding48174 ай бұрын
Great vidoe do you have a IWB Appendix holster for the B9R ds with the same setup I've Been looking and doing see any for Tisas
@rdrgear4 ай бұрын
The LAS concealment 2011 holster fits. But it’s a massive. Set for edc, if it’s your only gun I get it. But man, there is no reason to carry this over a standard edc driven pistol. Just my .2 cents.
@TheRange710 күн бұрын
@@rdrgear I agree 100%, great common sense response. Thanks
@MichiGUNder4 ай бұрын
I got the tisas 1911 carry ds i believe its 4.25in. Barrel i hale the holoson eps carry optic n a light about the size of the x300 surefire. What holster do u have that ud recommend?
@rdrgear4 ай бұрын
The 4.4 stacatto holster will fit
@settleschris19653 ай бұрын
I want one but I’d love some G10 grips.
@rdrgear3 ай бұрын
These are double stack they don’t gave the option for panels
@CommentingTheTruth28 күн бұрын
What's the difference between this and the Tisas 1911 Duty Double Stack? Looks identical
@rdrgear28 күн бұрын
@@CommentingTheTruth this is the double stack. 5” gun
@TheMattProdigy2 ай бұрын
comtacs on backwards, lit.
@rdrgear2 ай бұрын
Lmao. That’s what you took from This.
@rdrgear2 ай бұрын
I guess when are on backwards they don’t work right? You trolls always make laugh, with how pathetic you are.
@catman4x46623 күн бұрын
So how can I get a Trijicon RMR on one if I don’t have a slide to swap ?
@Drcoctopuss21 күн бұрын
Get it milled man. Wager is known for his Glock milling but I’m sure he would do 1911 slides as well
@Cerickson124 ай бұрын
Can they dual hammer recut the rmsc to a rmr?
@rdrgear4 ай бұрын
I want to say yes. But it’s better to ask them.
@Kingsc842 ай бұрын
I just got mine ran 135 rounds out of it. It sent brass flying at me several times. And the plate came loose. Other than that it’s perfect.
@rdrgear2 ай бұрын
@@Kingsc84 what plate. Did you. These are cut for the 407. 507 eps. You don’t need a plate and they don’t done with one
@rdrgear2 ай бұрын
@@Kingsc84 if the plate came loose. Did you use lock tite when you mounted it. I like the vibratite better for plates
@Kingsc842 ай бұрын
@@rdrgear I’m talking about the cover plate that comes on the gun. I guess they didn’t lock tight it or the expect ppl to take it off as soon as they get the gun.
@expo20000004 ай бұрын
Awesome :D
@bluemixal4 ай бұрын
How did you get the sure fire on the rail? Do you sell a modified key?
@maco8703 ай бұрын
Qvo tactical has sells adapters.
@idryfiretwentytwos4 ай бұрын
The West Valley of 1911's
@rdrgear4 ай бұрын
This is what CZ’ s want to be when they grow up.
@rdrgear4 ай бұрын
If Columbia university issued pistols. They would be CZ’a
@jlew68904 ай бұрын
Dedicated 2011 channel?
@rdrgear4 ай бұрын
We have a few. More will come
@peterschmidt28494 ай бұрын
❤️🔥🍑🇺🇸
@WoodrowWoods20074 ай бұрын
Is it really a 2011 / 1911DS if it has cheap slide cuts and no full length dust cover?
@db84drteg4 ай бұрын
Just like the Staccato P
@WoodrowWoods20074 ай бұрын
@@db84drteg not untrue LOL maybe I’m just stuck on the newest BUL Armory TAC Pro’s styling
@gingerd43214 ай бұрын
Yea, look at what defines a 2011, modular grip, frame and slide. Only one with all three, prodigy doesn’t have interchangeable grip. You could put a staccato grip on this if you wanted
@rdrgear4 ай бұрын
@@WoodrowWoods2007 Any 1911 single action pistol. That holds 15 rounds or more is a double stack 1911 regardless of brand. And please tell me how this DPO slide cut is different from any other 2011. It’s the same plate and sights that are on my alchemy. Which 2011 are you running currentl?
@michaelkraus41154 ай бұрын
Me too! I'm seriously just waiting to "pull the trigger" on purchasing the 2024 5" TAC PRO. It will be my 1st 1911\2011 style pistol. I know the price and build are not comparable to Tisas and so do you. At 3 times the cost, I'm not even sure why we're talking about this for this video. 😂@@WoodrowWoods2007