The 1000HP Cummins Build Gets FREE Suspension Changes!

[@greasymonkey5692]

ramrod should be lower still, im so used to how low the mini max was

[@waluigi9816]

That cold start on that finger snap was 🔥 😂

[@ebendeitz283]

When the Denali build start?? Absolutely cannot wait to see the route you go with that

[@nah_fool]

Got the interior cleaner today... my German Shepherd smells up my Cadillac as he is an outside dog on 20 acres. Long story short, great product. Thanks Bud.

[@wannabefulltimers]

I think the height is perfect. It's coming along very nicely.

[@ethanfrazer1958]

You should do a bed stack on ramrod

[@anthonymiller64]

Sits much better now. Keep up the good work jack

[@juansalgado9212]

has the 50 cal. antennas shipped yet ? still waiting on mine

[@ernestosan99]

Lower would look awesome

[@drewallen9720]

Good video. Saving up for my first cummins :D

[@joshmaag2457]

I bought the interior cleaner for my machine at work. Very very happy with the product.

[@Jscogs]

Reverse level and pull overload on the lml next!

[@HoldenPowell_]

I think the truck looks awesome at the height it’s at 👌

[@kdsoutbackgarage632]

Do you still get good signal on radio with that antenna

[@tommcdowell6055]

Hey there Jack..maybe try using your right hand for those snaps...lol

[@thomasfalls9328]

truck looks soooo good. new headlights would make it perfff

[@caterpillaryellow3941]

13:13 that yellow kenworth is Eric Musser

[@JoelG7.3]

Keep it like it is , looks prefect!

[@MrBoyRc]

So do you rub at all now with stock ride height

[@noahaaron643]

Looks amazing! I never thought I would ever like the lowered diesel truck look but u pulled it off to a tee!

[@stephengoralski3875]

Lower it for sure!!!!!!!

[@drakeslocum2564]

Leave it reverse leveld

[@rickymitchell7586]

Drop the front another inch and the back 3", that'll look killer

[@TheMofoManiac]

Keep it where it is!! Everything is proportionally correct, I do think the wheels have a bit too much offset though.

[@bpugh3]

Height looks perfect for that wheel/tire setup

[@spencerjennings304]

Winning giveaways is something I’ve never had happen but we’ll see how this one goes

[@Stupidmoneyinc]

Preach

[@NorthSwing]

It's like winning the lotto, especially with how he does 4x entries.

[@Dan-su1zq]

Spencer Jennings I don’t like giveaways I came here for the minimax and now it’s gone and he’s just gonna keep giving away trucks that I like

[@dedalliance1]

@@Dan-su1zq And you'll keep being introduced to new trucks and styles you might also like. It's a trade off. Plus, this guy can't own like 20 trucks lol.

[@jamesrheel369]

This is my second ever giveaway in my life I’ve entered and I pray it goes good

[@Plague_GG]

Still do the 3/2 lowering kit imo

[@gd1996]

Was waiting for this for 2hrs... love the cummins content! That truck is pretty clean, try doing the same work on one with some rust, you'd be rating it more like an 8 or 9, they can be a pain lol

[@patricklutz555]

Looks good how it is jack! 3inch drop would be too much

[@ObstructionlightingTech]

Ahhh the new tasks you take on. Let’s people know to accept all challenges

[@jackboulter4866]

God damn that new hoodie is sick!

[@austincarlson4707]

there is cold torches?

[@josefalero1087]

Where can find that antena ??

[@mikebishop4346]

I think it looks good the way it is but your the builder . Great video 👍🏻

[@Lucas-ry9en]

What is the tire setup for sizes

[@Aguyfromva]

Lower that piece 👌 freakin mint

[@AndrewFrysTV]

That sweatshirt looks sick definitely gotta order it.

[@markgonzalez3423]

I'm amped you lowered it ! Or should I say reverse leveled!!! Lol sweet doggie

[@elikahle1678]

Lower the front another inch to get that race truck/pulling truck look

[@Jjsuhs7]

Maybe I missed it. But is there an install video on how to install his version of the 50 cal bullet antenna? Or does anyone know if it’s similar to the ronin 50 cal bullet antenna?

[@garymyers7721]

5:05 dat turbski

[@BlaineHartzler]

Does anybody know a discount code for morimoto? Or someplace to get the RAM headlights on discount?

[@texan6.780]

I literally love your videos jack!!!

[@jonesboyshunting8673]

Should have went ahead and got new u bolts while you had it apart man most of them are a torque to yeild (one time use only). I hope that doesn't give you any problems down there road. As always great video.

[@colehenry1079]

Front lower 1-2 and rear lowered to match. Looks way better!! Still envision it being a little lower

[@Louthemailman]

Reverse level is perfact 👌👌👌🔥🔥

[@prestonjohnson4679]

Keep it the way it is next upgrade to look into is to change the front end parts to the late 3rd gen style I think it's the 08 09 steering component

[@dfrgarage1348]

Leave the height it’s perfect!

[@davidstephens1993]

Starts videos jumps down steps “what’s up everybody” 😂

[@ethana9161]

He says it helps him just get started with the video and not over think his intros and make it awkward lol

[@adriancrawford9218]

This was a informative video, and I’m going to do this to my truck to give it a level ride height

[@dominickirkwood]

I love it my boy Jack keep up the work and love video 💯💯💯

[@jables2153]

U definitely need an air Chisel in ur shop

[@ethana9161]

The guys saying lower it think that 305s wont rub? Lmao

[@ryleeholman2177]

Exactly

[@thomaswinters6527]

Bring back the grey camo hoodie!

[@garymishler7285]

Leave as is for the 5.9!!👌👌

[@icu_corey_rn_903]

Looks way way better

[@jasonpuzio9756]

The height is perfect 👌🏻

[@englertsshopwork8317]

If you want to go lower use ram 1500 springs up front and lowering shackles in the rear.

[@jonsauceda7678]

The height looks good as is clean 🧼

[@beechw9133]

pretty clean u bolts.... usually they look like rust boogers rather than nuts!

[@EhRoyalCanadian]

Am I the only one who has a minor heart attack anytime music comes on & is 10x louder than the rest of the video

[@wesleyallen6592]

Put a stack in it

[@submaster0566]

Please put a bedstack on ramrod

[@bling1634]

After that Mod RamRod looks good

[@4.6will]

What’s the best diesel under 20k

[@shawnlack8354]

Bryant Motoring any year cummins for 03-07 duramax

[@Constabruity]

6.4 ford.

[@swift__]

Loving that hoodie🤘🏻😎

[@That__silveradocustom]

Would definitely shackle the rear end it’s super cheap and easy

[@wyattchapman4569]

Jack how come you didn’t put brand new shocks on the truck while you were taking all of the suspension parts off?

[@ernestosan99]

Looks good but I think 14 wides would of been sweet 💯

[@aaronmcdowell7503]

I couldn't tell if he did but aren't you supposed to use a new set of u bolts after you loosen them

[@aaronpodgorski1617]

Let's name it the mini jack!!

[@frankensteinukab9615]

Lower Ramrod,to achieve the look like mini max.

[@JS_CSTMZ]

Does it roal coal

[@HoldenPowell_]

You forgot to add your end scene links in

[@BenDover-io8vc]

Lower it 2inches

[@eloyquintana6599]

what is name of wheels from AF on this bad boy need for my 19' drama 8/180 if anyone has some for sale lmk

[@tranquilityandmayhem860]

2 inches makes a difference!!

[@bobevans6590]

Tranquility And Mayhem that’s what she said

[@snyderkurtis]

White size wheels are on it?

[@eloyquintana6599]

24/12 24/14 anyone know the wheel name

[@mattward330]

Think another 2 inches in the rear and 1 in the front would look little better. Good video though.

[@fernplayz6369]

Could I get the leveling kit for my 2nd gen? I’m in Hampstead Maryland only like 45 mins from you

[@ryanbrown918]

Needs traction bars stat

[@MichaelSmith-xi7xh]

Needs more low

[@kendaldueck5997]

Definitely lower it more Jack!!

[@samgrabel8648]

Dodge doors are different between crew cabs and single cabs

[@tylerinman8843]

What’s the song

[@jtipp27]

Definitely still lower it 🤘

[@KennethYoungJr2]

Did it rub in the front after this

[@phillipherion]

Well you should change the the u-bolts too bur send it

[@jordonbS777]

perfect height now! leave it alone

[@ryleeholman2177]

Id leave it reverse leveled. Fuckin mint 👌

[@abepenner4436]

Lower it more

[@Louthemailman]

No way.. reversed level is PERFECT

[@cornelioknelsen5987]

I really think MiniRam would've been better than Ramrod, but It works.

[@ryleeholman2177]

Or mini moose

[@iluvfly11]

Should use por 15

[@thatsrtdude7076]

Awesome been waiting for this

[@shawnlack8354]

Beltech lowering kit is a 100% go too. Slam that shit on its balls

[@neverlookback5922]

Heat torch. What do they make a cold torch 🤣🤣🤣🤣🤣

[@theroemergarage6119]

It doesn't need lowered anymore.

[@stratosbassin2825]

Personally I like that height the best

[@workhard9513]

Ramrod looking good.... Maybe a little lower would be better.... FYI I jump head first into any job with the hopes I find any reason to buy a new tool I don’t currently own. Just saying 😂

[@Ivanrparrigin]

More loe 😀