The 840cc Power Wheels is Finished! Major Power Upgrades!

[@GrindHardPlumbingCo]

New weekly podcast here! kzbin.info/www/bejne/pYm1o2WAo7qeecU

[@fadedlight8596]

should name the camper cotton candy!

[@bigheadedmartian]

Grind Hard Pluming Can you take on a task for me, My name is Patrick and I was in a accident in 2001 that left me paralyzed in 2001, I have been trying to get my 1965 ford f100 truck get started which needs a shift cable and the motor cleaned out with new oil and fluids and I wanted to lower it by cutting frame and putting a C notch and drop spindles in the front and making the out side of it look like a rat rod, I have five hundred dollars for part. Can you handle this task for me?

[@hunterlebel8439]

I think you should machine the primary clutch to let it fully engage I did this on my bruteforce 750 and it helped a lot

[@jimmyhughes5392]

still think this would have suited a skidsteer drivetrain with big monster tires better.

[@strattonsmith7664]

Come to central Oregon

[@griffinspeicher3954]

PLEASE BUILD A TRAILER SO IT CAN PULL THE JETBOAT AROUND

[@christodd9085]

Omg yes this needs to happen that would be epicly premium!!!

[@Leoparh]

Dope but doubt it, they just built a pickup truck for that purpose.. but it would be SOOO COOL

[@Creamcheeseplease]

@@christodd9085I’ve never heard “epicly premium” before

[@johnathanmandrake7240]

Using capital letters makes it more likely that they'll see this comment.

[@SSpecialDelivery]

Thus guys onto something

[@josiahoakes2790]

Glad to see that engine get at least a 3 sec break-in period before Ethan got his thumb on the throttle. 🤣

[@goosenotmaverick1156]

Ahahaha I made a similar comment before I came across yours 😂 he must be of the camp "break it in how you're gonna use it" and don't get me wrong, I am to, but not like that lol I give em some heat cycles and such before I go do anything like that lol

[@Orofino6]

I gave them a ton of TriboTEX, they're in good hands now.

[@austinreynolds5702]

Lol

[@davidwatchesyoutube247]

Imagine it with sand tires the kind with paddles…. Would be airborne over the hilly snow

[@maxtremblay]

The quality of everything you guys do as incredibly increased since I started following you in Sendies begins. The build, the cameras and the overall production really is prime. I've never been disappointed by a Grind Hard Plumbing Co upload!

[@PBRRoughStockRanch]

Indeed! Genuine backyard content and great editing. Best wishes. Canadian cowboy ✌️🤠🇨🇦

[@ZoZooZoooZoxxxx]

Really & truly even made me wanna do some fabrication too even if iam a nonskilled person

[@AFMR0420]

I think the first video of theirs I watched was of the treehouse and I kept waiting for them to plumb it. 😂

[@victorgustafsson2328]

This is what projects are all about. Having an idea and altering it over time to create something that is so much better than anything you could have imagined. This has truly been one of the greatest projects so far, and it has been a pleasure to hang along!

[@erikjohansson4390]

Tip, when you wrap the exaust, do it wet 🙂 it will be tighter and best is if you can mount it and make it warm to dry up!

[@angry_birds_OFFICAML]

thats what she said *Show more*

[@la_plata3588]

Tip never wrap your exhaust it'll rust out

[@neonnerd1364]

@@la_plata3588 you're supposed to coat your exhaust before you wrap it. I prefer ceramic because it holds up the best to the heat and adds to the wrap. I've never had any issues with rusting that way.

[@goosenotmaverick1156]

@@neonnerd1364 I'm a bit obsessive. I coat, heat to cure, wrap, heat to dry, allow to cool then coat the wrap as well, the first one I ever did is still in solid shape to this day.

[@MD-ie6tk]

Indeed wrap wet, keeps the fiber dust down and shrinks tighter once dry

[@caardappel]

Fantastic episode. Filming, production, editing, music, VO, buffoonery all perfect; and WHAT a build! It's SO gorgeous. It is snort-ripping pure badass industrial art and I love it! Truly a highlight of the week!

[@SteveK6470]

One of best builds on YT I've seen. Just a stunning wonderfully absurb but fun work of art! So great to watch all the episodes of the build. LOVE your channel!

[@pavementpariah7342]

Of all the stuff you guys build, which I love, one piece I've been waiting for you to build into something is a Harley motor. I'm a Harley guy and it'd be KILLER to see you guys build something like this with like a sportster 1200 motor.

[@thomasreimer1767]

I think this is the nicest toy you guys build so far. I absolutely enjoyed the whole journey. Can't believe that it took one and a half year.

[@jeremyperraud1357]

For even more power you could free the intake and increase the amount of gas that enters the engine, also you could adjust rpm to the new power band with the weights and the spring of the CVT on that lil' monster of a build 🤟

[@bradenclifton45]

Yeah i was like what the heck it probably make barely any more hp then it did

[@1234567890CAB]

I was thinking the same thing, its wrapped to mimic the stock intake so it works on the stock carb tune. They need to get it tuned properly.

[@bradenclifton45]

@@1234567890CAB yes but that limits flow! More flow with right fuel and air makes power

[@1234567890CAB]

@@bradenclifton45 I agree, I was just explaining that the limitation was their carb tuning ability. There's no MAF to automatically enrich.

[@bradenclifton45]

@@1234567890CAB I understand that!

[@tysonsmith2064]

Sick build! To the only KZbin channel using makita tools! Dare to be different people

[@wecirclethesky]

That looks amazing! I can't imagine how incredible it felt when first seeing that frame after powder coating.

[@wtcamer]

Tip for bushing materials. If you can get some Delrin stock it works much better than nylon. Both have good lubricity, but delrin is much stronger and has a much higher temperature rating. Delrin does cost more, but it's WAY better for this use!

[@john9945]

You guys build the craziest stuff and make me proud to be an Idahoan! Keep up the good work you guys! Your content is always top notch!

[@nickyduhr8355]

Quick tip when installing exhaust wrap. Soak it in a bucket of warm water. It makes it a lot easier. Glad to see the dream camper getting finished!

[@slashnburndotcodotuk]

The weight of a socket makes a huge difference to impact wrenches, particularly on DeWalt and Makita

[@M074503]

no snow in tillamook forest, was just there this past weekend. lots of trails and awesome place we take our GY6 buggies and mini bikes.

[@200mmonster4]

The amount of work that goes Into these builds and videos is untouched in most realms of reality . Cheers grind hard from Ontario Canada 🍻🙋

[@BubbaDuke57]

Great build. You could use those little hex left overs as gussets.

[@CLCIII]

The MAIN reason I LOVE your builds so much is that they are WAAAY-Over-The-Top, which Make The PERFECT! MY OCD APPLAUDS YOU! 👏🏻

[@omnomshibob]

That's a glorious creation, love it. Do you still have plans for the electric tank at some point in the future? I was really looking forward to see you guys work your magic on that.

[@keyboardplayerakas]

They said in a prior episode that they got scammed on some of the parts

[@TravisJansma]

That Barbie off-road 4X4 is so cool!

[@jaredrichardson2944]

I love that you guys don’t settle for good enough. Makes the builds so unique and fun to watch

[@georgehope7782]

That's pretty cool! Your fab work is awesome! I have a 1966 Mustang I want to make awd electric, but finding fab guys that can do it is not easy.

[@krishillis5275]

What an amazing build, getting the body to fit was one thing, but when I seen you put the dash on it just blew my mind. This has to be my favourite build of yours.

[@DrGonzosCondiments]

well worth the wait. amazing build. thanks for having us along for the ride.

[@eamh2002]

Hats off to you guys making these in the middle of snow and ice etc. I'm Finnish and it sucks to work in the cold. Cannot concentrate on what youre doing cause all you wanna do is get back inside :D Sure you got some heating or the shed helps for sure even without heat but dealing with everything coated with snow outside and doing the snow plowing sucks 🥶😁

[@matthewharris89]

That may be the most beautiful thing to drive out of your shop! The Barbie camper turned out so good, I can’t wait to see it pulling the mini jet boat. Premium work boys!

[@jeremydelaney1112]

I cant get over how talented, creative, and detailed all of these builds are. Yall deserve so much success. This thing is a work of art.

[@johnnygood8334]

You guys definitely need to make a long travel princess carriage with a Kx 500 motor in the back with slicks

[@mikedavis6566]

That build it f*cking sick. I love it! I want one! Nice to see it all come together and painted. Just need the fender flares painted and installed. Great work.

[@mridaho7871]

The paint job is primo. The powder blue and pink is a great combo. Now I'd never own anything that was pink, but it looks great.

[@ebaymotors]

Amazing build 😁

[@TheosEpicVideos]

Hint for the workshop. Put a mag plate in the back of the cover. Then, around the workshop, put a bunch of magnetic car mounts to just put your phone. Up, out of the way and won’t get crushed doing work, but you can keep an eye on your phone.

[@Aaron48219]

I came for some beautiful, cathartic, drone footage...and I was not disappointed.

[@playstation8779]

2 snow mobiles take the rear tracks off and make a tank. I know you guys can do it. It would be perfect for the terrain

[@geoffburrill9850]

That thing rocks, love the colour combo. Try stiffer springs at rear to reduce it kneeling down at back under acceleration.

[@S2KYLEFXLRST]

I love when you see everything you were looking for in the into and can immediately exit the video.

[@michaelhardy2813]

Just got done watching the vid where you guys put the tracks on this thing. Literally the coolest thing you guys have built so far in my opinion. Its basically like a one seater mini rzr and with the tracks its seems very capable in snow or mud

[@TrulyUnfortunate]

Man it sure is beautiful in your neck of the woods!! If it weren't for your arctic winters This Texas Boy would move there in a second!!!

[@SODTAOE]

This thing is a full on legit mini monster truck

[@glenpiro313]

Outstanding!!! This one has been quite the build!!! Dude, you need a TigButton, it’s a life changer!!!

[@justinellis2936]

By far the Barbie overlander is my favorite build on the internet and there's a lot of MF's on the internet building stuff keep it up. KILLIN IT

[@mikeshivvers5461]

When you first started out I met you while living in Spokane. Ethen invited me out there. Watching you do your thing was an absolute treat to watch your mind work. I’ve watched the Barbie from the start and it looks amazing !

[@standardaussie]

16:15 Hit it with a blow torch on really low at distance fellas. If you ever need some plastic back from sun fade that is. Test in a hidden spot first obviously, your aiming at melting a micro layer at the surface for a fraction of a second. Surprisingly hard to mess up. Teqnuiqe and flame distance similar to spray painting does good, I did a full set of my old moto guards. They came up mint, old trick I think.

[@kotyhubbard749]

That purple go-kart van looks cool AF

[@jmerwood9]

I have been waiting for someone else to say they spotted that.

[@beinghappy1312]

I love that it took a long time to finish and seeing the process of that. I can't wait to see you make a full crazy EV hot wheels conversion.

[@andyroo3022]

I would love to see some more driving in the dirt, when all that snow melts. Insane awesome build.

[@dukie1616]

Been with you guys since the days of 30k’ish subs that my sense of your build times is way off, that year and a half for the Barbie camp build felt like about 6 months😂 You gents seem like family by now. Keep up the great work, you all are killing it!👏 In it for the long-haul with GHP!

[@moerow8215]

I wanna see these guys retrofit their workshop and add all around insulation from the floor to the ceiling, which is where the sponsors come in. They’re guaranteed to deliver quality content from a shack in the middle of the woods year round but hot damn it looks cold af outside.

[@user-ni2ux9ew5q]

I am completely jealous of your Barbie Camper.

[@MegaRetr]

Definitely one of my favorite builds you guys have so far!

[@huntlydvs2157]

great to see grind hard running motors in the proper way

[@stevenhallsworth5839]

An amazing build, brilliant viewing, well done.

[@mustachemike802]

I wish you guys lived closer... I have a set of atv tracks that would be awesome on ol' Barbie that I'd gladly trade for a little work on my 2007 Arctic Cat 700 efi ! Of course, you'd have to mod or make the mounts that would fit your custom a-arms, but I'm under the impression you could figure that out!🤣😉

[@kevinmiller4757]

chrome sockets are harder then impact sockets.. impact sockets are more rubbery so they delfect with the impacts of the tool.. they apply more torque because they are softer like a rubber band when you wind it up and the energy releases

[@nate8088]

I've gotta say, if you guys didn't build such ridiculous things, you wouldn't put nearly as a huge a smile on my face as you do, so thank you for making the world a better place.

[@oliververnon6966]

Dang this project turned out soooo good. I was a little skeptical at first that you guys could make a van body something cool looking and functional but ya'll nailed it! I will say that it pains me a little to see the restrictor still on the intake, hopefully with further tuning you can do away with that and get full power.

[@agentofspecter1]

Mario Bros meets Monster Garage. By far my favorite "We build cool stuff" KZbin channel

[@neonnerd1364]

It's really amazing how far you guys have come since the barbie mustang when I first stumbled across your channel.

[@Crazymotoman03]

What an incredible machine!! I absolutely love what yall did with this.

[@leeglidewell1473]

Just a suggestion for y'all's "proper 'send & bend' destination"... just a few miles outside Pasco Washington is what is known as Juniper Dunes. A family oriented off-road event is being hosted in April (?) by the Midnight Mudders. Bring y'all's campers and check it out. The Midnight Mudders do a clean-up weekend annually.

[@martingazdag7570]

I think for engine deadlifts and such you should keep a couple actual lifting belts around!

[@LivinTheDream247]

This build came out so good! You guys are amazing! It would be sweet to see you put Tracks on it for the snow.

[@zeelastman]

If your having issues with belts not lasting I started using Teryx belts and it helped them last a while longer. Just figured with a big bore kit you might run into that issue.

[@coreyerwin2536]

I love the travel on the A arms, I would build one like this but alittle larger for street. Awesome build!

[@ryanabdon1632]

Knitting lmao I’m watching this making a crochet blanket for my wife and I definitely a relaxing and chill thing to do while you sit and watch videos and such

[@TwoToolDesign]

Truly a beauty. I'd love to take this beast for a ride.

[@dericklong6191]

You can make a small paint booth out of painters plastic and 4 posts some 2x4s and a couple shop fans on top sucking the fumes out.

[@dericklong6191]

@contactgmail--- dude come on stop trying to scam people

[@chrisoakey9841]

Love your work. This looks like you should wrap the front, sides, and rear with a 1mm polycarbonate. And a snorkel for exhaust on the other. An electric turbo would also be cool. And some bigger wheels would be cool like the old balloon tires you see on marsh tree bunchers. For one of your crazy builds try welding a motorbike engine cylinder to head with no gasket then mill it down a touch for crazy compression.

[@andythomas7757]

I think the barbie camper will look bad ass with a set of tracks on it. Just a suggestion. Love the builds would love to see the taco in the snow.

[@mikecrystalrobert7898]

Amazing how stable it is seems planted to the ground👌

[@mke723]

Need to put studded tires on this.. home made studs of course, bolts, 3/4 inch.. made pointy on lathe

[@makotanko2994]

Awesome editing, also love the nature shots. Beautiful area

[@Nicholaswilms17]

I love the power wheels and you really need to go over landing again with all the 4wd power wheels please. I love your videos keep them coming 🍻

[@cobralyoner]

the level of finishing you guys reach these days is just insane! it looks amazing!

[@23hublock1]

Wicked little thing, what a hoot it must be to drive and have fun in that! Respect man.

[@23hublock1]

@contactgmail--- ok I will...I promise with all my heart ❤

[@23hublock1]

@contactgmail--- ok great, give me 5 minutes....

[@mikezadow4208]

Boys!! You gotta stud those tires !!

[@WalldoTheWInner]

These things are works of art. Really neat stuff

[@beardofankh6374]

Absolutely love the barbie PW car

[@hankjr.sfan1266]

It turned out awesome guys 👍🏻 I can't wait to see you take it somewhere with better weather so it can really perform! The jet boat is gonna look great being towed behind it! I'm sure you have a plan in the works for that. Anyway, premium work fellers!✌🏻

[@JustAverageJeff]

One of the greatest vehicles I've ever seen!

[@FaaaaaaaQ2]

Forced induction is displacement. Every 14.7psi of boost is an additional atmosphere which essentially doubles the volume of air being displaced in each cylinder.

[@N1RKW]

SWEEEET!!!! You guys totally hit it out of the park on this one! That is one seriously awesome Barbie camper!

[@aaronmcconnell7358]

The barbie van reminds me of the mini monster truck that was around in the 80's when I was a kid definitely a awesome flashback.

[@dema669]

build tracks for the wheels and maybe skees in the front and turbo charge the thing

[@amstef]

Hey Ethan, thank you for explaining the difference between chrome vanadium vs impact socket! A couple of mechanics at the motorsprts dealership I work at act like they never heard of impact socket. "They're all the same", they say!

[@MrBob92]

Words can not express how much I wish I had one of these Power Wheels

[@divinedriftofficial]

You should make something super wide and low where you sit lower than the engine. Would be so sick to make something look like those RC cars how they're super wide and low.

[@bps4086]

4:04 dipped the tungsten lol

[@Lucas12v]

The colonel is still my favorite thing you guys have built but the camper is really cool. And much safer.

[@beaverc2884]

One of the best builds I have seen, I can see a bunch of these types of vehicles performing at monster truck intermissions. 😃😃😊

[@kliether33]

That is the most adorable winch I have ever seen!

[@jean-philippebeaulieu807]

That thing need 4 snow on all corners and they'll be a pure winter beast!!

[@kerryhall6456]

Get a plexus glass windshield. You guys should also make like a enclosed plastic window cab for winder

[@HulluJanne]

That thing looked absolutely hilarious in the packed lumps of snow.

[@brentheltsley7187]

Would love to see the Colonel in those conditions 4x4. Hope you get some dyno tube time before a dune trip. Nice work

[@ziptyfyter6348]

Would love to see yall take one of those blue race car beds and turn it into something drivable

[@Fix_It_Again_Tony]

Nylon is a pretty great material - very strong and light, but it absorbs water and swells which can lead to binding. UHMW is a good alternative, but I understand the use what you got mentality. You guys need to sort out the engine control so you don't need to restrict the intake over the filter. Get the air in there!