The Absolute Best Results From A User Friendly Coating!!! BLUE COLLAR 1 Polysilazane Coating!

[@apexdetail85]

Those that have already used Blue Collar 1.....share your experience. 🙂 Available in the UK-www.in2detailing.co.uk/pages/search-results-page?q=blue+collar Canada-carzilla.ca/search?q=blue+collar Aus-www.ausprodetailing.com.au/

[@Amor1990]

Can you use this on windows?

[@epattonm]

I've only coated 4-5 cars prior to trying BC1, and I must say that it was a piece of cake. The one thing that surprised me was the lack of slickness with this product. But after 4-5 hours, I topped with BC3 and sent the vehicle on its way! The "customer" was amazed at the shine! Going on month 4 with several washes and it still looks like the day it was applied!

[@rickebert3849]

The four month update on my daily driver which makes multiple trips across Alligator Alley and is the Florida sun for half the month. The Coating is doing fantastic and the plastic trim looks as good as the paint. Topped with BC3 once a month. Also experimenting with BC3 on the wheel wells. Great results so far. Thanks, Brian!

[@KPDetails]

Gotta love the bugs on Alligator Alley! I live in Fort Lauderdale and run across to Naples, Ft. Myers from time to time as well.

[@elithegreat6463]

I used BC-1 on my BMW-R9T Motorcycle, as it has an aluminum tank, and it's the slickest I ever felt it, ever. I maintain with the BC-3, and the combination is amazing. It's only a Weekend Rider, but it always looks like a Show Bike among others with this product.

[@skipgumphrey9579]

I’ve used quite a few different products and I preferred this to all of them. When you include the fact that I was able to easily install in direct sunlight/heat/humidity of Florida summer, then it’s the hands down winner of everything I’ve tried before. SO easy to use !!!!

[@davidboyce6427]

As I watch this video for the 2nd time It’s clear to me your son Brian has shown his level of maturity; takes his job seriously. He has made you proud Brian🫡. Him and Sissy the future shop managers 🤗🤗🤗👌🫡. Also my gallon size BC 3 arrived today 🤗🤗🤗

[@ShineYourLightDetailing]

Incredibly thorough video, Brian. Hope a lot of people watch this and get the information they need to use it! 👍🏼👍🏼

[@davidwilliams365]

I really enjoyed using this product Brian. As you might imagine it gets pretty hot and humid down here in S Tx And it was 102 in the shade and the heat index was about 109. I coated three full sized pickup’s that day under the tents and your BC 1 didn’t try to resist me at all. It went on and wiped off easily as stated. Unlike a few other brands that I’ve tried yours wins out in the heat contest . I will be purchasing some more here in the next few days. Thanks and keep up the good work.

[@petemanschula293]

I’ve used several different brands and I have to say BC1 is by far the easiest and most user friendly. Truly amazing product!

[@BlueJeanF150]

I wish the sun had been shining, that Antimatter Blue is GORGEOUS and would've loved to see how great it looked after you were done with it.

[@mikeyp2447]

I used it on 3 cars… works as advertised. BC 2 is another gem!👍🏻

[@scottsigmon926]

I have been using BC1 now for 6 months and I really like this product. Everything is EXACTLY as you describe. It is grabby at first removal but the second wipe is very smooth.

[@neilwalker5041]

Excellent coating to purchase and this coating will last. The ease of use is awesome and this coating will get slicker after it cures. Kronos is the same way being grabby at first and then becoming slick to the touch.

[@chrisrochester4511]

Really appreciate all you do! Thanks for uploading so many videos, I’ve learned a lot!

[@apexdetail85]

My pleasure!

[@kxld03]

Bc1 is a great coating.. Coated my silverado about 2 months ago and loving BC1

[@Enthusiast_detailing]

I’ve yet to try a ceramic coating but this one looks perfect for me

[@luketuttle1096]

Got to love a coating can put on in direct sunlight!

[@fernandoorozco3764]

Installed maybe a month ago and topped with BC3 has been great!

[@lukepyron7468]

Great stuff. Super easy to use - even for a newbie DIY guy like me. No issues on a black car with some areas of the car in direct sun at different times.

[@gregmannos]

Brian, I'm concerned about the mixed signals you are sending the shop manager... first you bribe her with an escalade, then you deprive her of a clean vehicle. 😂😂😂

[@apexdetail85]

It is a full time job to keep her happy. 🙂

[@millerdetailing4176]

Great video and products Brian enjoy the whole BC line up.

[@apexdetail85]

Thanks 👍

[@johnp6987]

The 4 hour cure time is very interesting to me as my car would have its LSP applied outside by myself

[@apexdetail85]

Perfect for DIY....or mobile detailers.

[@richardseem7948]

Awesome video and content good friend

[@apexdetail85]

Thank you 👍

[@andreasde6567]

GREAT man! I am still craving and waiting to be able to get it here in Germany 😊 also BC 2, 3, 4 and 5!

[@apexdetail85]

I have a few links in the pinned comment above that may help.

[@andreasde6567]

​​@@apexdetail85?noshipping to Germany. I need to wait and being patient. But thank you for your help

[@BRITTGYPSY]

Just so I understand, no need to wait to wipe it off and no hurry to wipe it off. I can have my cake and eat it too? Very versatile!

[@pwrshots]

Easy peezy.

[@apexdetail85]

Absolutely!

[@richardseem7948]

Fantastic job as always brother

[@apexdetail85]

Thanks again!

[@nachomandetailingservices1057]

Amazing ❤ result and easy to use! Love this video

[@MNpicker]

Definitely something to look into😁👌

[@davestewart9146]

So Brian the one question I have is on a vehicle that has somewhat faded plastics, do you try and restore the plastic first and then coat it or will just coating the plastic bring it back to life? I’d like to coat my wife’s car but the plastics not perfect, great video Sir 👍😁

[@apexdetail85]

Restore with BC2 first… top with BC1 as you coat the rest of the vehicle.

[@davestewart9146]

@@apexdetail85 thanks 👍😁

[@Chris-wb7ni]

Beautiful product to use

[@eecc17]

please let carzilla carry the large BC1 bottle for us canadian detailers :)

[@norcalspitshine6406]

Nice

[@gorillanismo]

Brian, love your channel, you have teach me so much regarding machine polishing and also coating that I really think this channel has been a game changer for the industry. I have a question regarding coatings in general, I have a daily driver (that sits outside 24/7) Jetta that I coated all plastics 2 years ago with Carpro Dlux, now the coating has faded and I heard on another channel that this situation is game over. Because the coating is still there but not working I cant apply a product like Solutions Finish to restore but also I cant coat it again because the new coating is not going to bond properly because the previous one is still there and plastic is oxidated. 1. what are my options here? 2. is it a good idea to coat new cars when there is a risk that this could happen?

[@nicksdragon6929]

Brian, would a second layer increase durability? I figured with your experience you could give me ballpark estimate of how much longer the coating would last with a second layer. Thanks

[@billbuss7542]

What is the minimum clear cost thickness you will work on, both in mil and microns?

[@vrodxvrodx]

What about FADED black trim? Do you use another product first? What about a dash for its protected quality? Waiting to try it.

[@apexdetail85]

You can restore with BC2 or Solution Finish first… then coat.

[@yoji8130]

can we wash the towels after use or does it harden and have to throw it out ?

[@dontaclebourn5679]

What size bottle would i need to coat a current gen Chevy Suburban?

[@millerdetailing4176]

Ready

[@Wiikendzgoodmix]

Ever experienced paint that no paint protection seems to bond to? Ive tried so many type of protection, waxes, sealants, ceramic coatings, wet coats so on, and not a single one sticks like they should. I can polish the car, do two ipa wipe downs, apply whatever protection to see it fail way to quick, last summer a 18 month coating failed in less than a month. My latest try is 303 graphene, best luck so far but after a month horizontal surfaces definetly look worse than they should. Wouldve been cool to try this coating, but unfortunetly I live in Sweden, we dont have as much stuff to choose except the big brands like gyeon etc.

[@apexdetail85]

Try BC 1. There are more distributors in the pinned comment that may help.

[@Wiikendzgoodmix]

@@apexdetail85 None that ship to Sweden it seems, atleast not without customs fees and taxes. Not ready to spend too much money as nothing seems to work anyways..

[@juansalinas6446]

I had 15 ml left. For how much time is the remaining coating in the bottle good for after opening.?

[@allenrees5803]

Already done quite a few cars using bc1 fantastic product try it yourself user friendly great results

[@apexdetail85]

Thanks for sharing

[@pwrshots]

Bri put it on my Mazda 6 .came out great. Really got that glossy look after about 2 weeks. However, I noticed a small section on the hood that looks blotchy. Like when you paste wax a car and miss a spot. It only shows during the late afternoon. You don.t see it during bright sunlight. If you had to guess, what did I do wrong? Also do you sell the applicators? Will be doing another car soon.

[@apexdetail85]

The coating could have piled up in one area as it was pushed around… level with CarPro Essence plus.

[@pwrshots]

@@apexdetail85 I’ll give a shot. Thanks

[@rooboy99]

Hi Brian, do you have any tips on stopping sweat dripping out of your gloves when applying a coating? I would normally tuck some kleenex around the cuff of the glove but they soon get wet if working on a warm day. Thanks for the informative video. Clients car has just arrived for a clean, polish and prep for bc1 and 3

[@alanmorelli1426]

There are a couple things you can do to keep perspiration from dripping on the car. If using nitrile gloves, you can use sweat bands and wrap them with an elastic sports wrap. Another option is to use light work gloves that have a breathable fabric backing. Home Depot has their own version along with some from Milwaukee that have a grippy surface making it easier to hold the applicator and towels.

[@officialchill1706]

Hi Brian, I was looking for advice for a one-step polish setup. I have a 2009 light blue VW. After watching your videos I was looking at picking up a rotary, some pads (maybe Koch Chemie orange?) and something like Turtle Wax 1 & Done. Do you think something like this should work, or should I consider a DA and a different compound, I know you've also showcased Sonax and Koch Chemie One Cut. Thanks!

[@apexdetail85]

The 3 D polish system including 3D One is worth a look.

[@officialchill1706]

@@apexdetail85 I did some research and was looking at TW 1 and Done which I think you’ve previously mentioned finishes better than the 3D. I was also looking at the Uro Fiber 50/50s, unsure if these would be too aggressive. Seems like a pretty solid combo?

[@dinsmore346]

Did you actually do that complete vehicle with all that trim and wheels with just one bottle? If not, how much did it really require? Thank you! Great video...

[@apexdetail85]

I can get two of these coated with one bottle.

[@dinsmore346]

@@apexdetail85 Wow, that's impressive! I will defiantly try some. Will it work well on my fiberglass boat? Thx for the quick reply!

[@wadeokamura7028]

@apexdetail85 I am interested in this coating. But will it be able to be shipped to Hawaii?

[@apexdetail85]

Yes…no problem. We have already done so.

[@Xaviers300ZX]

3-5 year...how would you advertise this coating in packages when there are multiple coatings that offer 3 OR 5 year longevity? And is there a warranty system?

[@apexdetail85]

I use it as my 3 yr and 5 yr coating. Once comfortable with the coating, create a custom warranty on your prep, protection, and maintenance.

[@HARRYZLING]

Hello, can I apply BC1 on PPF?

[@KingTheDetailer]

What's the cure time brother ?

[@Amor1990]

Still waiting for those Hercules polisher videos you said were coming up a long time ago 😢

[@kirkwilson5900]

Check 3 weeks back. His video is the reason I went to get my Hercules

[@Amor1990]

@@kirkwilson5900thank you for your comment. I did see that one in real time. But that was just a tear down. He said he would have it in future videos doing actual work.

[@doxparadise]

When you're ready to re-apply - what prep do you need to do?

[@apexdetail85]

Cleaner polish and foam medium polish pad, Panel prep, coat.

[@ethanblan435]

Is it still easy to apply in 90° temperatures with above 80% humidity?

[@skipgumphrey9579]

Did a friend’s vehicle in direct sunlight in Florida and in much bigger than 2x2 sections and I had NO problems with it at all. GREAT product !!!!!

[@apexdetail85]

Yes… start off with smaller sections… but you will be surprised how you can expand the surface area you are working on if needed.

[@bstewartexecutivecarcare3797]

Brian what are your thoughts about applying a coating before installing PPF?

[@apexdetail85]

No problem if you stay away from the edges with the coating.

[@kimnewling5728]

Excellent

[@andrejobin3810]

My question is which compound and polish and is best to use prior to ipa and coat.

[@apexdetail85]

Try 3D One or Phoenix EOD Papa Cut.

[@andrejobin3810]

@apexdetail85 I can use 3d one then ipa before ceramic coating . I'm surprised

[@aarongrantthebulk]

So if it’s that easy and simple (I don’t doubt it), can’t you just do whole panels before buffing, or even a whole car? I guess, what are the limitations in application?

[@skipgumphrey9579]

I’m no expert, but I’ve tried EXACTLY what you asked about so… Installed BC1 on a friend’s vehicle in direct sunlight/heat in Florida in much larger sections than recommended and I had no problems at all. Did the hood in 2 sections, front fender complete, two doors complete, tailgate, then did the same on the other side. All during the day and I’m no professional, this is just a hobby. BC1 topped with BC3 was the easiest of all products I’ve tried and looked great despite me not following directions. Hope this helps !

[@apexdetail85]

You can… but I advise smaller sections for beginners.

[@tundrawhisperer4821]

Which coating blocks do you use? Thx Brian

[@apexdetail85]

Any microsuede block ...I have quite a few different colors...but they are very similar.

[@tundrawhisperer4821]

@@apexdetail85 Okay Brian, but you are still developing a coating block to offer on your site? After watching this video, I’m ready to go to the next step with paint protection and your product looks like the one use! Thx

[@tundrawhisperer4821]

Brian, How many application blocks are included? Thx

[@apexdetail85]

Not at this time. I am sourcing the ultimate applicator as part of an upcoming kit.....stay tuned.

[@tundrawhisperer4821]

@@apexdetail85 Thanks Brian, is there an applicator that you would recommend in the meantime? Thx

[@Tops1212]

How long does BC2 last after it is opened pls Brian?

[@skipgumphrey9579]

1 year

[@apexdetail85]

Up to a year if stored properly. Dark and cool.👍🏻 You can also wrap electrical tape around cap at threads to help seal a bit better.

[@Tops1212]

@@apexdetail85 So BC1 and BC2 both have a 1 year use by date from when it gets opened?

[@stephengilmore2516]

Hey Brian, How many applicators do you use on one vehicle?

[@apexdetail85]

The block in the video is flipped and used on all sides.

[@Tops1212]

What are the blue microfiber towels Brian?

[@apexdetail85]

Edgeless picked up from a local detail supply. Detailworld.

[@richardseem7948]

If solutions finish is applied how long b4 Bc1 can be applied

[@apexdetail85]

Let it cure an hr or two.

[@Thetyrerepairer]

Will you be shipping to the U.K soon

[@apexdetail85]

www.in2detailing.co.uk/pages/search-results-page?q=blue+collar

[@Thetyrerepairer]

@@apexdetail85 Thank you

[@moisesperez3693]

Do you use a short nap towel ? 1st or 2nd towel

[@apexdetail85]

Short nap for coating are recommended.

[@aarongrantthebulk]

Also, would you apply over solution finish?

[@apexdetail85]

Absolutely!

[@moisesperez3693]

How many sponges did you use to coat that jeep ?

[@apexdetail85]

A block or two per vehicle… using all sides.

[@richardseem7948]

If u need a 2nd layer how long between coats?

[@apexdetail85]

2 hr good friend.

[@mingoreyes1]

What's your favorite ceramic coating to used?

[@apexdetail85]

Blue Collar 1…. Hands down.

[@mingoreyes1]

@apexdetail85 I might have to try it. I use igl only. But you also be an honest and great teacher. So, I got to get some is irlt professional grade coating? Do you a code to use for the product?

[@mingoreyes1]

Is Blue collars brand brand/company?

[@apexdetail85]

It is my Private company.

[@ryanpaul5604]

How many ml to coat that bronco?

[@apexdetail85]

15ml… half the bottle.

[@1stfrompuertorico568]

First!!!