This case is actually pretty awesome and we have had a lot of fun with it. Don't forget to drop your comments below if you have one and let us know the experience you have had. Also don't forget to share you rigs with us on our Discord community here: discord.com/invite/Dx7xZt5MHF
@FadiQv3 жыл бұрын
Liked the video cause I can see how cold it was in that room :) keep up the videos mate.
@TechLabUK3 жыл бұрын
Thanks. It was freezing lol
@prashantghimire81873 жыл бұрын
bro, how cold is the room you're filming this on, thhere is fog coming out of you're mouth when you speak
@TechLabUK3 жыл бұрын
It was really cold, heating issues but video must go on :D
@mikeontwitie3 жыл бұрын
@@TechLabUK freaking madlad, that deserves a upvote.
@PCFixer2 жыл бұрын
This looks like a really nice case; I love it when cases have some space at the back for cable management between the case side and the motherboard tray! It means that you can use a non-modular power supply and make REALLY clean-looking builds!
@Scates3 жыл бұрын
Have had this now for a couple of months, literally love everything about it. Especially the hinged glass panel
@TechLabUK3 жыл бұрын
The hinged glass panel is a great feature.
@GatsuRage3 жыл бұрын
is it actual glass or acrylic/plastic material?
@megadeth85923 жыл бұрын
@@GatsuRage glass
@zsombi4336 Жыл бұрын
Could you tell me how loud the fans are?
@Scates3 жыл бұрын
Just built in this and it's bloody amazing, 240mm rad in there, vertical GPU and was piss easy to build in, absolutely love this case seems way better designed than my housemates case which cost significantly more
@TechLabUK3 жыл бұрын
It's a really good case. Aerocool pulled off a good one with this.
@Scates3 жыл бұрын
@@TechLabUK hell yeah they did way better than the last aerocool case I built in 😅
@TechLabUK3 жыл бұрын
@@Scates Looking to get a few more in for the channel. Hopefully they are built just as well.
@chottomatekudasai-kun38873 жыл бұрын
I was looking to Buy this case too... Mind You answer if the included fans can be controlled with the motherboard (argb 3pin)?... Also how's the space behind the mobo tray good enought for cable management?
@TechLabUK3 жыл бұрын
@@chottomatekudasai-kun3887 No, the built in fans don't appear to be compatible with motherboard control but the ARGB can be controlled separately, just have to hold the LED button down to switch it. Cable management was fine, loads of space.
@jokroast69123 жыл бұрын
Hope you get the heating issues sorted out soon, or some blankets.
@bop96223 жыл бұрын
Thank you, i was looking for this.
@J0nb0ysl1m3 жыл бұрын
Just to clarify I bought one of these cases. It does not come with an ARGB controller. The Fans ARE addressable but I could NOT get them to work. They have multiple connectors for motherboard control or controllers.
@TechLabUK3 жыл бұрын
There is a controller built into the front panel. The LED button on the top turned them on and then cycles through a number of presents (Albeit not that many) then to override with a motherboard or external controller you have to hold the LED button down to switch. I'm not sure how many versions they have made of this case though but that's the functionality of the one in the video.
@J0nb0ysl1m3 жыл бұрын
@@TechLabUK mine simply does not work then. 😔
@J0nb0ysl1m3 жыл бұрын
@@TechLabUK** UPDATE ** there was a bent pin inside one of the connectors. LED button works perfectly now \😁/
@TechLabUK3 жыл бұрын
@@J0nb0ysl1m Woohoo! Glad you got it working :)
@zsombi4336 Жыл бұрын
This review was great! Straight forward and easy to understand. This case looks great and I'll definitely consider buying it.
@MrMultiSuprime3 жыл бұрын
I love cases which support 200mm front fans. We are getting a lot here for £50!
@TechLabUK3 жыл бұрын
You do really get a lot with this case. I am still trying to find a real issue with it but can't.
@MuaazC3 жыл бұрын
@@TechLabUK the back fan is very loud
@Gates-Tech3 жыл бұрын
really happy with this case. just perfect for matx
@GatsuRage3 жыл бұрын
the side panel is it actual glass or platic/acrylic?
@Gates-Tech3 жыл бұрын
@@GatsuRage glass:)
@akkad75143 жыл бұрын
that front fan is HUGE
@TechLabUK3 жыл бұрын
It's a 200mm fan. It's size gives the case a lot of airflow with little noise.
@ikeloscat50892 жыл бұрын
it is cold up there in GB. Thank you for the excellent review...
@tomweyts3 жыл бұрын
i'm actually gonna give this case a try for my next budget build, Aerocool really knocked it out of the park with this series, but they need to start adding dust filters in the front imo. Also there are 2 versions of this , The LITE V1 for around 40 euro's , and now the V2 for 60 euro's. but i don't see any difference in the 2 exept ARGB vs regular RGB
@TechLabUK3 жыл бұрын
I believe the V2 also comes with the GPU support bracket as well.
@mythosrealms3126 Жыл бұрын
Above decent review! Thank you for helping me picking a case for my system!
@andreidracianu29883 жыл бұрын
nice thick case :) love it... and btw, how cold is your filming place?
@TechLabUK3 жыл бұрын
Thanks for the comment. It was super cold on that day due to heating issues :(
@GioTata693 жыл бұрын
I was about to ask the same question, seems pretty cold in there
@TechLabUK3 жыл бұрын
@@GioTata69 It really was :)
@SunkaWicasa2 жыл бұрын
AMAZING CASE for the price ... very underated but its good only a few own it lol ... love mine cheers mate
@prestonprzybylski13063 жыл бұрын
What mobo would you recommend for this case?
@TechLabUK3 жыл бұрын
The largest form it will support is Micro ATX.
@guydavies2093 жыл бұрын
Nice case! But put the heating on next time lol
@Sergeant_Camacho2 жыл бұрын
This one looks too similar to the Vertroo M1 case. Good video.
@outlawfett35303 жыл бұрын
Looks good!
@miguelzaldo96333 жыл бұрын
thank you very much
@narender38393 жыл бұрын
Nice review, bought one to make a desktop for my wife after seeing this, thank you
@TechLabUK3 жыл бұрын
Glad it helped. This case actually went to my son for his first gaming PC and it was amazing to build into.
@julianramirez95633 жыл бұрын
Can I change the colors of the cooler with the buttons on the top
@narender38393 жыл бұрын
@@julianramirez9563 old version (v1 is rainbow effect) cannot change. New version (V2), you can change color with the button.
@ljp98703 жыл бұрын
Could I put a z370 motherboard in this?
@TechLabUK3 жыл бұрын
Any Micro ATX or ITX board will fit but not a full ATX.
@mha20152 жыл бұрын
Just came here to say wow, yes, that is his breath
@OfficialRomee Жыл бұрын
looks cold there bra, in aus our cooling has to be top notch due to hot climate
@TechLabUK Жыл бұрын
lol yeah, heating was broken. The new studio is much better. Make sure you check out some of our newer videos in it 🙂
@MV_962 жыл бұрын
Good presentation, thanks!
@pedropablonarbonacarvallo8943 жыл бұрын
Hello, I have a question, does this case have an argb hub and a fan hub? Thanks in advance
@TechLabUK3 жыл бұрын
There is no hub built in that you can extend from. There is just a small unit built into the IO that controls the supplied fans.
@pedropablonarbonacarvallo8943 жыл бұрын
@@TechLabUK good, so you don't have to buy anything apart for the fans and the argb to work?
@TechLabUK3 жыл бұрын
@@pedropablonarbonacarvallo894 You won't have to buy anything else to get what's provided working. Only if you want to replace/extend.
@pedropablonarbonacarvallo8943 жыл бұрын
@@TechLabUK perfect, thank you very much for the help, I think I already have a new case😁
@ble.gria102 жыл бұрын
your video was so helpful for me! thank you man
@akiztoi3 жыл бұрын
hi, It is possible to install a normal size power supply?
@TechLabUK3 жыл бұрын
Yes, a standard power supply will fit.
@akiztoi3 жыл бұрын
@@TechLabUK thanks
@finleywalker58433 жыл бұрын
Thanks this help a lot
@sksupply Жыл бұрын
Just bought this for my daughters build and it looks amazing. Just curious what's temp in your studio there? I bet your rig runs cool in that room! 🥶
@TechLabUK Жыл бұрын
lol. It was very cold as the heating broke and we just did the video anyway. now the studio has been refurbished it's all working so no more issues. At the time though all the systems ran very cool lol Thanks for watching and I really hope you daughter enjoys the build, it's a great case.
@TheRammsteinfan913 жыл бұрын
Nice Review. Greets from Germany
@TechLabUK3 жыл бұрын
Thanks :)
@skorpers Жыл бұрын
This and the Vetroo M01 are oddly similar.
@mariom19392 жыл бұрын
Hello. I would like to ask if the 4 pci slots in the back are the ones that just break or can we re apply them?
@TechLabUK2 жыл бұрын
They are the break away ones.
@mariom19392 жыл бұрын
@@TechLabUK Couldn't find the answer to this all over YT... Thank you
@matthewbond90482 жыл бұрын
Brilliant! You are a natural my friend. I'd buy it 🙂
@TechLabUK2 жыл бұрын
Thanks for watching 👍
@anna453333 жыл бұрын
Why oh why is only for ITX? Why they can't make a cool looking case like this but only larger to fit full ATX...
@TechLabUK3 жыл бұрын
It supports ITX and M/ATX. It is a shame they don't do a full ATX version though.
@anna453333 жыл бұрын
@@TechLabUK Idealy i would add on the upper part of the case a slot for a DVD-Rom drive. I know it isn't used much but sometimes you may want to install older stuff and i think the option should at least exist. As for the full ATX i don't understand why they are limiting their target group so much. Most people have full ATX motherboards.
@TechLabUK3 жыл бұрын
@@anna45333 I can only guess that their research for their target audience tells them to do what they do although they do have many other options available in their other cases.
@serenychhor60953 жыл бұрын
aerocool.io/product/graphite/ here atx format
@eduardozavala86582 жыл бұрын
thx for the video, I just want to know if it is capable of hold 3.5'' HDD
@TechLabUK2 жыл бұрын
Yes, you can install two 3.5" drives in the cage in the basement.
@stevenwarne693 жыл бұрын
cold day was it bro?
@TechLabUK3 жыл бұрын
Very :)
@waldo13593 жыл бұрын
What temperatures did you get and which components?
@TechLabUK3 жыл бұрын
I haven't taken any temps but the 200mm in the front provides plenty of air to the system. The system in the case at the moment is an Asus Prime B350, Ryzen 5 1600 and a GTX 1060 and there have been no thermal issues. I have installed a second exhaust fan in the top though to help move the air out.
@waldo13593 жыл бұрын
@@TechLabUK I'm thinking to get a ryzen 5 3600 with a rtx 3060 but I'm not sure if the case will provide enough cool air. Do you think I should look for a different case? If so which one?
@TechLabUK3 жыл бұрын
@@waldo1359 I think it will provide more than enough cool air. 200mm fans can move quite a bit of air. As for alternatives it totally depends on what features you are after and price range. If you have discord, join the server (Linked in KZbin header), there are a few people who can help.
@Niick_182 жыл бұрын
I got the v1 and my question is how do i get that front panel fan out because its broken and i wanna replace it
@TechLabUK2 жыл бұрын
Remove the front panel by pulling it off from the bottom. Then unscrew the front fan from inside the case.
@franciscojavier83772 жыл бұрын
Today i build my pc with this case, sadly the rgb from the 120 milimeters fan die just minutes after i finish to assamble and start to smells like burn, ill keep it for now but dont know if should go for the warranty just for a freaking fan
@TechLabUK2 жыл бұрын
Oh no, sorry to hear that. If it is just the fan that seems to have failed I would contact Aerocool and see if they will just send out a replacement. If it is the RGB controller within the case then I would send it back.
@robblevins60092 жыл бұрын
What is it like 37 degrees in your room I see your breath when your talking lol 😆
@Newo_07 Жыл бұрын
Can you add another case fan?
@TechLabUK Жыл бұрын
You can add case fans to the top so yes.
@weihuang61653 жыл бұрын
subscribed, good luck sir
@spinkey4842 Жыл бұрын
the case might have better thermals if the air flow is reversed, including the cpu cooler
@jibbyjabby74992 жыл бұрын
Great video dude. Would you happen to know what the difference is between the v1-v2 and Lite? Thanks.
@TechLabUK2 жыл бұрын
I don't know the full set of differences but I know V2 comes with a GPU Brace / Bracket. The Lite versions are smaller and don't come with a hinged window.
@jibbyjabby74992 жыл бұрын
@@TechLabUK thanks for the reply. All that makes sense. 👍
@GeordiLaForgery3 жыл бұрын
Great review if you were building a matx build is this the one you'd go for?
@TechLabUK3 жыл бұрын
Personally yes. The one seen in this video was used for my sons first build and tbh it's been an amazing case for thermals, ease of build and ease of upgrades we have done so far. I actually want to get another for the Lab.
@GeordiLaForgery3 жыл бұрын
@@TechLabUK Cool thanks I was considering a Silverstone Fara r1 as they're the same price but that has only 1x120mm fan.
@TechLabUK3 жыл бұрын
@@GeordiLaForgery Iv'e not used the F1 before so I can't compare but the 200mm in the front of this provides a lot of air flow for little effort so it's pretty quiet as well.
@GeordiLaForgery3 жыл бұрын
@@TechLabUK Cool case I'm impressed with the design especially the side door.
@TechLabUK3 жыл бұрын
@@GeordiLaForgery One of my favourite features also. Makes it real easy to play around with your setup after as well. They do make an Atomic Lite as well which is same design really but not as wide. They cut of the vertical GPU mounting in it though and don't have the hinged door for some reason. Never seen one for sale yet, only on their product pages.
@kakahuatin23 жыл бұрын
Hello, where are you from, friend, I see that it was very cold
@TechLabUK3 жыл бұрын
It was winter and the heating had failed lol
@HyperScorpio86886 ай бұрын
Are the fans standard 2pin 5v ARGB?
@TechLabUK6 ай бұрын
They can be over ridden by a standard 3in 5v aRGB connection yes.
@HyperScorpio86886 ай бұрын
@@TechLabUK 3 or 4 pin fan connectors too I have to assume?
@waldo13593 жыл бұрын
Do more standoff come with the case?
@TechLabUK3 жыл бұрын
I believe it came with a couple in an accessories bag.
@Mdodo183 жыл бұрын
hello, can we turn off the rgb ? thank you
@TechLabUK3 жыл бұрын
Yes I believe so. You cycle the RGB effects with the LED button on the front IO until you get to the off setting and it will remember the settings. If you hold it down it will switch to the override so you can have a separate controller / motherboard control the lighting instead (If you have the connections). Hope that helps.
@Mdodo183 жыл бұрын
@@TechLabUK ok im not english so im not sure you talking about the led on/off in the vidéo, thanks for the fast reply, have a nice day
@TechLabUK3 жыл бұрын
@@Mdodo18 No problem. If you visit the Aerocool website for this case it has a picture of the front IO and you can see the available buttons.
@MuaazC3 жыл бұрын
Hi I've had the cass for a few weeks now and since I've started to game on it the back fan is always very loud is there anyway to fix this?
@TechLabUK3 жыл бұрын
I don't believe there is anyway of changing the speeds of the provided fans. I've had one running for a while and it hasn't been that loud. An alternative would be to replace the fan in the back with one that plugs into your motherboard so the speed can be controlled.
@MuaazC3 жыл бұрын
@@TechLabUK any recommendations?
@TechLabUK3 жыл бұрын
@@MuaazC If you want to remain with RGB then you will have to make sure you have a controller or header on your motherboard to control it but I would go for something from Aerocool.
@GatsuRage3 жыл бұрын
hey mate quick question if you dont mind.. the side panel is it actual glass or acrylic/plastic? Thanks in advance!
@MuaazC3 жыл бұрын
@@GatsuRage it's actual glass
@Sonsofanarchy_mg3 жыл бұрын
Hi, how much does it weigh please?
@TechLabUK3 жыл бұрын
I never weighed it but it's not a heavy case due to it's size. The glass door probably hold most the weight.
@GatsuRage3 жыл бұрын
@@TechLabUK is it actual glass?
@TechLabUK3 жыл бұрын
@@GatsuRage Yes, Tempered glass.
@GatsuRage3 жыл бұрын
@@TechLabUK is there any risk to explode due to overheating from the case?
@TechLabUK3 жыл бұрын
@@GatsuRageI doubt it from heat. It's tempered glass which can resist quite extreme levels of heat.
@Niick_183 жыл бұрын
I got the v1 lite
@TechLabUK3 жыл бұрын
Nice! It's a great little case. just built into this one and it was a dream to work with.
@Niick_183 жыл бұрын
@@TechLabUK nice🙂
@deradminlucky15623 жыл бұрын
How can you cange the fan color ?????????????
@TechLabUK3 жыл бұрын
There is an LED button on the front IO next to the reset button. If I remember correctly you press it once to cycle through the colours or hold it down to switch it to motherboard setting (If you have plugged it into your motherboard).
@deradminlucky15623 жыл бұрын
@@TechLabUK Thank you so much!!!!!! Of course I pressed the wrong butten first while my pc was running a game... But who thought it would be a good idea to use the same buttes for the reset and the color butten !? 😐
@TechLabUK3 жыл бұрын
@@deradminlucky1562 A lot of cases re-use the reset button for the lighting, it just depends how you plug it all in which is even more confusing. Glad you sorted it :)
@MelvinDlaCruz Жыл бұрын
This is a copy of the ventro m01
@TechLabUK Жыл бұрын
Have heard this since taking a look at it.
@olegovicholeg21253 жыл бұрын
У него пар из рта идет, в гараже чтоли сидит. Жена выгнала?
@TechLabUK3 жыл бұрын
Thanks for the comment. It's actually a workshop and the heating was on the blink but the video must go on!
@kujo203 жыл бұрын
О, сэр, да вы чёртов Шерлок Холмс! Вау
@MrChabrang2 жыл бұрын
smoke comes out of your mouth
@Mihalychnext2 жыл бұрын
у чувака пар из рта идёт!!! брат... ты на улице живёшь?
@axe20012 жыл бұрын
it's obvious you're making up what you're saying as you go. Write a script and your video quality will be better.
@TechLabUK2 жыл бұрын
We say what we see. Newer videos are scripted but not always, sometimes we just roll with it.
@Pierredorado3009 ай бұрын
Maybe put some heating in your studio lmao
@TechLabUK9 ай бұрын
Heater was broke back then, all works now since the studio refurb.