The Beast gets a treat :) sg116 max steering link and screws upgrade!

00:00 Intro
00:53 removing the old links
01:44 tips about the links
02:55 installing the steering links
06:50 showing the result
08:15 installing Hex screws
12:14 Original link comparison
13:20 Final thoughts and credits
Hello youtube here i show the best steering links i found so far to our beloved sg116 MAX rcars and i also upgrade the screws from philips head to hex, i think it was well worth it has now i dont stress with the screws anymore they are much easier to install and dont round off easily like the original ones.
Come along and enjoy.
Links for the products in the video:
Steering link kit:
s.click.aliexpress.com/e/_Dey...
2.5mm HEX screws:
s.click.aliexpress.com/e/_DnM...
note:be sure to choose 8,10,12mm and 2.5M screws
4 in hex screwdriver:
s.click.aliexpress.com/e/_DF0...
Here i leave you a comprehensive list of what i buy for my rc car, if its somethng you need and its not here, please leave me the request in the comment section, i reply ASAP, i appreciate the support.
sg116max rc truggy direct from the factory:(THIS RC IS A MUST HAVE)
s.click.aliexpress.com/e/_EIT...
Link for the hood pin retainers:
a.aliexpress.com/_EJAxnLb
battery velcro straps:
s.click.aliexpress.com/e/_EG6...
Steering link kit:
s.click.aliexpress.com/e/_Dey...
HEX screws for rc cars:
s.click.aliexpress.com/e/_DnM...
Shocks shown in the video:
s.click.aliexpress.com/e/_EjR...
shock oil i use in my shock tunning:(for sg116max go for 350-400 csp)
s.click.aliexpress.com/e/_EuW...
95mm tires i use the most in my sg116max:
s.click.aliexpress.com/e/_EG1...
heat sink and fan for 2847 size motor:
s.click.aliexpress.com/e/_Ezg...
must have aluminium body post:
s.click.aliexpress.com/e/_EuE...
Wire adpater to divide the signal from ESC and connect various fans:
a.aliexpress.com/_ExgyKMX
Lights i use in all my rc cars:
s.click.aliexpress.com/e/_Evn...
Electric connector for rc lights:
s.click.aliexpress.com/e/_EJ1...
4 in hex screwdriver:
s.click.aliexpress.com/e/_DF0...
Affiliate Links for the batteries i use:
www.ampow.com/products/ovonic... (fits the original battery tray)
www.ampow.com/products/ovonic...
www.ampow.com/products/ovonic...
www.ampow.com/products/ovonic...
www.ampow.com/products/ovonic...
www.ampow.com/products/ovonic...
this are affiliate links.
thanks for watching
#rccar #rclife #rcfun #rclovers #rccars #rcreation #rcstyle #remotecontrolcars #rctoys #toysforkids #truggy

[@RonyRc700]

Também comprei ums desse

[@scottparish9156]

Hi mate, hope you and the family are well, cool video and good tip about the steering links, good price as well. Me and my boy have been having great fun with our Beast max's 😂, I have got a few more mods to do to them one of them being a 3s conversion which will make them absolutely terrifying 😬😬👌, take care mate and keep up the good work 👍

[@Fast_Lane_RC]

Hi Scott glad to know that you and you re boy are well, thanks again for your kind words, allways a pleasure to ear from you. Glad that you like, see you soon my good friend and give a hug to your son from my part. Cheers

[@guentherfranzsemmler7245]

Sehr interessant. Ich habe das gleiche Modell ebenso mit all den blauen Alu-Teilen. Aber mich würde es interessieren wie sich die Buggy-Reifen verhalten. Mein Max ist brutal auf den Achsen. Er kann nur mit dicken Reifen! Auch interessiert mich wie sie den Ventilator am Motor anschließen. Meiner fährt ohne, aber mit Kühlrippe.

[@Fast_Lane_RC]

Hello, i have a video showing this, go check it out: kzbin.info/www/bejne/joq6Zmiag8SZlZIsi=PCu3aqEi70a1amw0 If you need more help feel free to ask i will be more then happy to help. Thanks for wathing and for the comment my friend, see you soon!

[@jeanmason8211]

Hi question can those work on my q117 brushless car

[@Fast_Lane_RC]

Hi, and thanks for the question, yes they will, the kit comes with 3 links that fit the stock q117, the other 4 you keep for spares, cause you can reuse that screw that has in the center of the link and change the tips when the ball head gets worn or the arm bends(it had happen to me before). Thanks for watching, and dont be a stranger!

[@wilber8637]

👍nice video brother.. 😅Brother can test upgrade Ysido 2847 5600kv..60a brushless ESC..oil shock.. receiver..radio control & small pinion gear.. 😂because im upgrade Ysido 2847 5600kv brushless motor..80a brushless ESC..oil shock..small pinion gear..receiver & dumbbell radio control.. If brother after upgrade brother just know what is crazy fast & easy wheelie... Im after upgrade top speed now is 103kmh-135kmh.. Wish brother video channel 1days must be more many fan... Have a good days brother...

[@rickybaldwin6160]

What weight shock oil do you run?? I just ordered the same blue Aluminum Alloy Suspension kit u are running I have some oil shocks on mine right now and they are too stiff I have some 800 weight shock oil but I think that might make them stiffer.

[@Fast_Lane_RC]

Hello Ricky and thanks for passing by, i use 400 cause i also think the 700 i had was too thick, i rhink it could be even less then 400 cps, so go for the 350 and you will ne good. If you have any more question feel free to ask, i like to help others.

[@rickybaldwin6160]

@@Fast_Lane_RC you are very welcome!! I ordered some Team Losi Racing 50wt silicone oil off Amazon so hopefully that’ll be perfect!! Also what is a good cheap lipo charger that’ll charge 2s n 3s lipo’s??? And thank you very much because I’ll definitely need to ask some more questions!!

[@Fast_Lane_RC]

@@rickybaldwin6160 hello i use this one to charge mine: s.click.aliexpress.com/e/_EIqqWpH There are cheaper alternatives for this one charger, but i ordered from choice a cheaper one identical in appearance and it doesnt stop to charge when it should everytime and sometimes overcharges, so i recommend tou get from the seller i shared. Thanks for your support, has i told you feel free to ask your questions also help others so thank you.

[@Fast_Lane_RC]

@@rickybaldwin6160 i found this that my help you : 10wt = 100cst 15wt = 150cst 20wt = 200cst 25wt = 275cst 30wt = 350cst 35wt = 425cst 40wt = 500cst 45wt = 575cst 50wt = 650cst 55wt = 725cst 60wt = 800cst This is the weight conversion chart so 50wt might be too thick still, but test it before make any conclusions and order another one you might not need hehe.

[@rickybaldwin6160]

@@Fast_Lane_RC what cst/weight did you say you use? Because this team Losi is 50wt 710cst so I’d say it’ll be too thick. Also I ordered one of those chargers not too long ago and the first light won’t show up anything and then other 2 lights work but won’t tell you if they are done changing.