THE BEER WALK IN IS TOO WARM

They called because the beer walk in was too warm and the unit had some problems, heck it still has problems but I got it operational until they can make some hard decisions.
HVACR VIDEOS NEW MERCH WEBSITE - www.hvacrvideos.com
Please consider supporting my channel by
Becoming a Patreon member - Patreon / hvacrvideos
Becoming a KZbin channel member / @hvacrvideos
By purchasing tools via my affiliate links below at TRUTECHTOOLS.COM and use the offer code BIGPICTURE to save 8% on your total purchase (exclusions apply)
Visiting my website and purchasing merch www.hvacrvideos.com
HVAC OVERTIME CHANNEL LINK - / hvacovertime
Social Media
Facebook / hvacr-videos. .
Instagram / hvacrvideos
For any inquiries please contact me at [e-mail]
Mailing Address
HVACR VIDEOS
12523 LIMONITE AVE.
440 - 184
MIRA LOMA, CA. 91752

[@adamdnewman]

They put fire sprinklers is crazy places, LOL 😂

[@LuisB9214]

I’ve seen one inside a walk in

[@Destroyahx2]

@@LuisB9214 The company I currently work for has one in each of their larger walk ins

[@throttlebottle5906]

warm beer, *panic panic, come fix it now!* warm/thawing food wait multiple days then call for service. 🤣

[@dioncurtiscurtis3188]

yea procrastination at its finest

[@pettergardo3874]

It’s really important that not only you elbow says click when torquing with wrenches, you also need say “click” out loud, preferably right after you removed the wrench from the nut.

[@HVACRVIDEOS]

Ha ha finally someone that understands my brain

[@Eledore]

Thank you for that sight glass closeup when it cleared up.

[@YzsForLife]

yep his videos have gotten more informative and definitely more detailed!

[@CM-ou4zr]

Dude you have no idea how much your videos help newer techs like myself. Went from strictly chillers to work on everything alot of VRF and multi head mini splits and infinity and refrigeration. Watching your diagnostic steps helps me so much I've gotten ten times better and a 8 dollar raise. What you are doing is helping so much bro

[@Pwills]

20:37 Nothing worse than a sensitive knob 😂🤣😂

[@thejedibunny4802]

This dude is has the best refrigeration channel out there. Super humble and knowledgeable .Thanks for sharing this info.

[@terrypardy1678]

The torch has a packing you can snug up to help alleviate some play.

[@eeeeweeezeee]

No wonder you got outsmarted by the wrenches, you forgot to yell "Click!" when the flares were tight enough!

[@miamisasquatch]

My first job in high school was a tech at a refrigeration test lab. One day I was told to tighten up 24 fittings on a residential test setup for 12 units. Being the strong ambitious high schooler I was, I torqued the heck out of those poor swage fittings... Ripped every one apart for a 100% replacement rate. My senior tech (an ex Lennox guy in Columbus) was pissed.

[@jordanhenshaw]

I autopsied my first compressor today, a Copeland Scroll. Originally wasn't going to since I new it was falsely condemned, but now I know what a compressor is supposed to look like inside. Bright yellow oil, nothing but shiny grey metal, and super smooth movement. Oil was a bit low though. Now when I autopsy a compressor that is actually bad, the damage will really stick out!

[@HVACRTECH-83]

Hmm, in CT we have 25lb bottles, we don't call them 30lb bottles and they all say 25lb net weight

[@UpcraftConsulting]

15:00 I have come back to locations 10 years later and found tools I left behind up in the roof before. Almost immediately when poking my head up there I see it and it triggers the memory of when I lost it. I imagine you have a few "missing" tools at previous jobs just waiting to be found again.

[@davidturney2975]

That last section before the sit down really felt like you were explaining stuff to one of your apprentices. Fabulous work sir

[@edwardwilliams8261]

One good reason for the second service valve is to isolate the drier/sight glass for quick and easy change out on moist systems. It just saves the step of pumping it down.

[@HamiltonMechanical]

HA! I use that fire sprinkler as a prime example of situational awareness with my students chris! Warn them about catching that on their tool bag!

[@andrewshaw9223]

Love the videos, completed my Fgas about 2 years ago and im learning more everyday thanks to them! FYI I’m always mentioning this channel for all the guys I know who are in hvac in the UK. Keep em coming!

[@pedroavila9433]

Thank you for mentioning to add extra solder on the pipe junctions me personally like to add extra solder too and I thought I was doing it wrong but now you confirmed it to me that I’m ok the way i been doing it, too me it just adds a little extra protection anyways thank you for being a great teacher for those of us that are barely starting on these field work I have learned a lot watching your videos thanks again

[@natepeterson7145]

Johnstone carries those spark igniters that Chris uses for his torches in case anyone needs one.

[@noeljunco]

Yo man you are an inspiration for real!! I've been in the trade for 12 years and I love it, wish the guys I worked with would enjoy it as much as you seem to enjoy it.

[@t8erchip]

You keep doing you. Cheers and Thanks for the videos

[@coryscomputerrepair]

Isnt so nice to have the right tool for the job on hand? I have invested in so many small tools for my business but I NEVER get tired of needing said tool and having it on hand! :)

[@jeffreyhueseman7061]

The service valve on the suction as side is a cost, but the time gained by having a blow through during assembly is worth the service valve.

[@snoopyjc]

1:05 is that your lunch heating on the roof? It looks like a Subway sandwich LOL!!

[@TheNolesfan94]

Thank god for KZbin. I tell so many guys to watch your videos in their free time if they actually want to be a better technician. Other than that, we need more guys like you in companies teaching us young guys how it’s done. I’ve learned A LOT from you and am extremely thankful for it!

[@HVACRVIDEOS]

Right on bud thanks for the nice words

[@buffalobobbayoushow6040]

40 years in the trade. I like this video!!!

[@HVACRVIDEOS]

Thanks bud!!

[@daleborg9070]

Chris, if you tighten the packing nut just below the on/off knob then the knob will not be as touchy. About 20:40. I also like to make everything clean and neat. I have some OCD in that respect.

[@ElectraFlarefire]

We DO have to be just like you! Everyone should be a clone! It'll help sell you a lot more hats when we are all sitting at our computers narrating our HVAC videos. :)

[@HighTechLab]

How do you use your fancy hook when you need to bring a nitrogen bottle on the roof? I have some guesses, but would be interested to see. I wish the small bottles had a cap for the valve stem like they do on the bigger bottles, then you could make a custom cap that has a ring on it to easily grab with the hook.

[@HVACRNorth]

🙌🤘Did someone mention overtime 😮. I wonder who that person was thought thought we were getting ripped off🤔

[@neilcvids2583]

Hey, put out the fire

[@garypoplin4599]

11:04 - Wow! Thanks for showing the sight glass being cleared. That was beautiful. Now that I’ve seen first hand (well. . ., you know what I mean) what I’m supposed to be seeing, I can say this is the most helpful segment of this video for me! Thanks for sharing your knowledge and insights. 26:13 - and a little Gump thrown in for good measure. Thanks.

[@zekenzy6486]

Great Video. Great Job. Nice Work . I'm learning Refrigeration . Thank you for making these video. Thank you for sharing

[@chrisconney4978]

80% of capacity in cylinder due to blends and room for expansion. It’s not like the good ole days

[@xzearr]

If im uncertain about sightglass either full or empty, i always pump it down lf it has a tank. That way you can tell!

[@chriswhite7193]

You are an amazing tech. You are actually pretty damn top notch. There are always asshole wanna be super techs who criticize no matter how well you do. It really does trip me out how arrogant some people are. I give you major props, this trade ain’t easy, it’s hard as hell, especially when it’s 110 degrees out. I am amazed that you have the patience and diligence to film this and explain while you are working, incredible, I definitely don’t have the patience. The fact that you cut open your compressors just to truly know what caused the failure is just above average. Many of us just don’t have the passion to do that, and honestly I feel guilty not having done that more myself. It truly does make you have such a more in depth knowledge about compressor failure and what caused it and what it actually looks like mechanically. My hats off to you sir, you are truly a professional. Keep up the good work, I pick up new and better methods every time I watch your channel. You are a credit to our industry sir.

[@DelticEngine]

Thanks for another great video, Chris. I really liked all the extra effort you put into it suchas showing how a sight glass clears, how prepare to make prepare a proper brazed joint, what to watch for when swaging or flaring pipework, and loosening valve packing to prolong packing life. You packed a lot of tips, advice and other information into this video.

[@OGHVAC]

Ahh...the old school "elbow torque wrench" application. Your dad must have taught you that 😉. Clean in informative video Chris.

[@THEMANTR]

Chris, I'm a IT-professional and L-O-V-E your long and explaining videos. In our world, we have also cooling going on, like the datacenters (I know, it's A LOT bigger). I learned a lot from your vids where I can understand the background of the cooling systems in our datacenters. I'm one of your subscribers from the beginning. Just keep going on man, love it! Greetings from The Netherlands.

[@CM-ou4zr]

Leiberts? Data aire? What kind of crac units you guys got over there

[@THEMANTR]

@@CM-ou4zr we are using the cooling solutions provided by APC/Schneider Electric. Unfortunately I don't know which brands we have over here for chillers on the roof. :( Sometimes I see Trane units here and there, but not everywhere..

[@CM-ou4zr]

@@THEMANTR that's cool I love working in data centers they are always cold in the summer and clean

[@THEMANTR]

@@CM-ou4zr definitely!

[@atsimas]

Unfortunately, I use the same free-spinning nut on copper water pipes of 1/2. I've come to find that all free-spinning nuts leak at the stem despite me, using a parer or rubber mating between the parts. So the best technique I use is to use some plumbing hemp at the threads and pack everything including the stem, in thread sealant. Then screw everything sufficiently. That works like a clock. I've come to know that the correct force is when you wait 5 minutes, apply kitchen paper to the stem, and not see any condensation from the water. So the industries are not so dissimilar.

[@robertfinlay6635]

Installing the sight glass in the vertical position makes inspection easier

[@TechOne7671]

Another informative video mate, no dramas just sorted. Thanks again. Keep them coming.

[@dadaselectro4794]

its a joy watchin your videos! your attention to details, your approach.. amazing! Plus i learned so much from you! You are a proper guru of the trade!

[@philwhiting3818]

Another brilliant video. Watching from the 🇬🇧. Not been in the industry long. Busy season is just kicking here. Keep the videos coming. 👍👍

[@onntopic7878]

I learn a lot from you thank you for making these videos you teach me a lot of things that I didn’t know and I’ll be going into commercial in a year when I get my journeyman’s license I love the videos👍

[@brianmcdermott2430]

Great work, Chris. Thank you.

[@jamesprice6843]

Really enjoy watching your videos and the big picture concept. Keep up the good work.

[@kat2641]

I “”always “” switch our systems to flare❤ Time is money and allows me more time to check out the system for any future possible problems.. AN??? Lol at my age? I don’t like making a lot of trips up an down bringing stuff to the roof . So I guess in my old age I have gotten lazy too😂😂😂😂

[@jeffreywhitlatch1409]

Lubricating the threads prevents galling of the threads. Of course, you should lube them. Those people running their mouths. Excellent video.

[@brutoof_ai]

I watched the livestream regarding the nitro. Totally understand. Thank you

[@peterhodgkins6985]

Another good job!! I always learn and I'm always entertained!

[@RoaddogRoaddog]

New subscriber here, awesome video and ur great at explaining ur process while repairing. Glad I found this channel.

[@juan200025]

Love your videos my friend, thanks a lot.

[@throttlebottle5906]

your other left @ 23:00 lol one thing that always occurs from time to time is backwards wrenching, now throw some left hand threads in the mix for real fun. 🤪

[@johnwalker890]

Good job Chris, I heard the clink in your torque arm wrench, some people are just never happy with how people do things, just unhappy individuals.

[@TravisDoesGames]

Thank you for making these videos

[@sprinklersandmore9567]

You make great vids ❤

[@orionthesion182]

Btw thanks you helped me with a repeat call multi tech and a comp later condemned the txv. Few hours later txv swapped new filter haven't been back that was a few months ago.

[@jsfkdkjslfdslfkdj]

There’s a nut at the base of the knobs on the torch handle that you can tighten up to make them less sensitive to being bumped

[@mikekjellman]

i like this style of video

[@danpresson]

Awesome video enjoy watching

[@terrygrant8126]

I get educated....thank you friend!

[@kens.3729]

You’re Videos are so Good, how could Anyone Not want to Subscribe ? I know Answer is Clear but also know Common Sense is Not too Common, Right ? 😬👍

[@nrs135]

Half gallon products that are now 50oz are the rip off, social media dude just doesn't understand gross vs net weight (not getting into gas expansion, etc). Next time just tell them I have neither the time nor the crayons for this conversation 😄

[@Natsumidragneelkim]

That sounds like me when it comes to computers.

[@robertferreiro3466]

Thank you

[@kat2641]

❤ well?? On a 140 degree day?? That fire sprinkler might feel great spraying out 60 deg water 😂😂😂

[@InsanePacoTaco]

I don't think you'd want to get hit by that nasty stagnant water in the fire suppression system 🤣

[@kat2641]

@@InsanePacoTaco lol well?? Like a fine well aged wine 😅😅 a little sharp in the smell 🙃

[@throttlebottle5906]

@@kat2641 you'd be covered in black death water, and everything would be stained black/ruined. it's nearly as bad as sewage water.

[@Gears.and.Gadgets]

I couldn't agree more with you. Where possible I use flare fittings as well. Many times I will use leak lock rather than nylog but I have used both. I have an inficon DTEC and a Bacharach h10 leak detectors. And there will be times that I may use UV dye with a blank light. But I do agree with you we all do things differently. And I as well am meticulous for cleaning copper pipes before brazing.

[@billlaporte8255]

not just the torches on the roof but also the nitrogen tank also... it is a lot to bring up there. I agree with your flare dryers

[@jasonjohnsonHVAC]

Stratus for the win. I love it....Definitely the best leak detector I've ever owned. I had one of the OG's....the H10G....i loved that, but it was stolen from me. I bought the Stratus last year and its paid for itself in finding tiny leaks. I use an A17-15 tip on my torch lots of larger suction lines that are 2"+. Supposedly the A17-15 is good up to 2⅝" pipe.

[@chris76-01]

Everything important likes to break on Friday afternoons 😊

[@jollygreen4639]

Or it breaks or leaks because it was manufactured on a Friday afternoon…

[@chris76-01]

@@jollygreen4639 lol. Yes, that too😅

[@Casal70]

Good one!

[@gabesreef]

This was a really good video 👍🏾

[@nebraskaman8247]

I’ve found sometimes with the 400 series refrigerant in hot weather those sight glasses just like to flash sometimes. In this cases I just go off of the pressures, and make sure the super heat is good.

[@kevinarmknecht1075]

Enjoy your videos.

[@HVACRVIDEOS]

Thanks bud

[@gabeplay8179]

Me too mate:)

[@Walczyk]

You are awesome, killer videos

[@TheColinputer]

I wonder if there is someone who got a shot of big blue in their bloody mary lol

[@kam_mil]

lol

[@jacobikes805]

Haha that’s the first time I’ve seen you braze without nitro!

[@HVACRVIDEOS]

I will discuss this on my Livestream this evening on KZbin 6/12/23 @ 5:PM (pacific) come on over and check it out kzbin.infoCPjb6E9YmCc

[@JoeCdaYT]

You would be frustrated with the company I used to work for. A lot of the employees are not trained HVAC people and the boss holds all the licenses supposedly to operated. He tells them to vent systems and lets certain favorites to get away with doing real crap work. He canned me after I noticed some real shady stuff happening and have moved to my current job in which I don't drive all over the State of Washington. I now stay on grounds and am chasing the work that the previous company was doing to the equipment and feel that they were not qualified to work on restaurant equipment. They should stay with Air Conditioning from what I have seen. I was going to comment on the connection point of the vacuum pump but had a second thought after realizing how the TXV will work when there is no refrigerant flow. As I always say, keep the equipment going though it may be a turd until it is a burning heap.

[@zacharyreed45]

Where is summer at bro? 82 degrees in June, ridiculous.

[@specialK_hvac]

He's based out of southern California

[@zacharyreed45]

@@specialK_hvac I stand by my comment.

[@manuelherreros4609]

The yellow jacket torque wrench is a good one. The size of it easy to use and accurate with the torque. It has been in the market for a while with no issues.

[@williammunford476]

Yes I heard elbow click right side hahaha nice work

[@kens.3729]

As Mikey Pipes says it Best, “If you’re Not Testing, you’re Guessing”. It’s Obvious you’re Thorough while Watching Every one of your Videos. 👍🙏

[@HVACRDUDE]

Hey why is there that glass thing....should be alot of bubbles right?😊

[@CaseyRedDragon]

What is the middle part in the sight glass for?

[@throttlebottle5906]

that's a moisture indicator and it changes color if there's moisture in the system or when new and not vacuumed down/charged with refrigerant.

[@atsimas]

There is a safety technician mandatory here, who is audited about how effective he is by the state. Just tell him about that hazard and make him write it it the state book he has to have. If management doesn't correct it there should be a fine for them.

[@Pippy626]

It’s going to be hell soon with the new refrigerant requirements coming into play soon as it’s flammable. It will make jobs a lot harder like this and how will that work with fire regulations speaking it has pounds of refrigerant.

[@ffaemerson5716]

hey you can tighten down the knobs on the tip i had the same problem and did not want to buy another one i used a wrench and fixed it

[@shine-cg9uf]

💪🇺🇲❄️👍 great informative video thanks for sharing

[@orionthesion182]

Whats funny is i know the chain based on the equipment.

[@stanpatterson5033]

20:37 ... that statement is probably most often heard in the San Francisco area... lol

[@shapedstones]

CPS blackmax torque wrench is a solid choice

[@JGnLAU8OAWF6]

Sight glass basically just shows if there is any subcooling, correct?

[@roblottering5656]

Well I don't know every country has a different colour code for the refrigerant well i a. From south African and 404a is in a orange bottle

[@eyrie08]

Electric heat because you typically run a beer cave below 34 degrees. Too cold for just an air-over defrost.

[@haydenc2742]

Can you see if the friction reducing oil called MotorKote is compatible with compressor/freon oils...and if it would help reduce friction in compressors? I put .25oz in my car's AC system..and I could literally hear the engine start running smoother, and could feel it idling much more evenly...but I want to know if it helps reduce friction and wear and reduce heat in compressors

[@oscalerup1129]

Serious question, why not close the suction service valve before opening system to atmosphere?

[@LadyAnuB]

I think it's the vapor pressure of each refrigerant that changes how many pounds can be put into a standard cylinder

[@stargazer7644]

Pressure variation doesn't change how much liquid the cylinder will hold. Liquids are not compressible. The density of the liquid determines how many pounds can be put into a standard cylinder.

[@Natsumidragneelkim]

The condenser is in a excellent place nowhere near a exhausts so Grease shouldn't be that big of a problem.

[@Bencrzn]

Take it service work is better pay then install

[@andrewn7101]

Cylinders are filled to 80% capacity. 30lbs X .80 = 24lbs

[@ssmith1129]

Good Ole Bristol😂