THE BEST 1/10th Steering Servo for Crawling!!! 1100oz-in of TORQUE (NSDRC RS1 Steering Servo)

[@teamnsdrc8438]

Very cool! Thank you so much for the great review! One thing we want to point out, you should be using an external bec like a castle 10amp bec so you can get the full potential out of the servo! Most ESC internal bec cannot provide the power this servo needs, like in your video when on the wood pile and you see the servo stops... thats because it wasn't getting enough power it requires. If you use a castle 10amp bec at 7.4v you will not be able to stop it! It will have much more power than even how you're running it in your video! Once again, thanks for the great review! Team NSDRC

[@teamnsdrc8438]

That Hobbywing Axe ESC can only output 4 amps, the RS1 can draw 8-10 amps to generate maximum power. This is why we recommend running the castle 10amp external Bec to provide adequate power for the RS1 can perform to its max!

[@joshsrcs]

I will definitely look into it and will probably get one sooner or later! Thanks!

[@noz8437]

Using a HobbyWing QuicRun 1080 is not enough? PS: I'm just starting out in the hobby

[@joshsrcs]

The 1080 has the same 7.4V output as the AXE I am running in the video. The amperage is around the same at about 4 amps. The BEC gives more amps and allows more current to be drawn thereby giving more power to the servo resulting in more torque and speed.

[@robschierbaum]

Very nice. Great unboxing. And testing . nice bronco very cool.

[@STP_RIDGELINE]

🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥

[@rcplaytime]

your bronco looks awesome 😀 👌 👍

[@wilsonbaker2924]

Amazing video

[@wilsonbaker2924]

Outstanding

[@davidcorral8380]

Do you think it will work on the Arrma BIGROCK 3S 11.1 volt

[@joshsrcs]

It will work, but you won’t experience it’s full power on the 6v BEC that the 3s esc supplies. I wouldn’t spend this much cash on a low voltage application like the Bigrock so I’d recommend on getting a PowerHobby Servo from eBay or Amazon. SUBSCRIBE!!!

[@FR3EKELITE]

Ok is it tornado time 😂

[@Apasash]

great video, nice car, have one too

[@robertnewland8358]

How much did you get to pitch this garbage? It doesn't fit a trx4 mount. Doesn't fit any thing I have. Don't waste your money.

[@joshsrcs]

Haha! Great joke dude, I spent about $150 of my own money to buy this. And for however dense you are it does fit a TRX4 mount (otherwise how would I be operating it?).

[@robertnewland8358]

@@joshsrcs it doesn't fit the stock mount or the aluminum mount. So suck it!