The Best And Easiest Vats Bypass C4 Corvette And Other GM Vehicles

[@noellagunas1242]

Thanks for the link. Am looking forward to do this on my 01 trans am. Awesome video 👍

[@rotorblade9508]

I worked with some cables under the steering wheel and at some point I disconnected a two wire cable from what I thought was open end but turned out I already had the vat delete and it was actually the resistor needed to start the car because it wouldn’t start anymore. I was lucky I didn’t throw it to the bin because it contained the resistance value. anyway I read the error code and then saw your video which helped me figuring out what I’ve done thanks PS I now saw the orange cable didn’t know what it was

[@tinkeringjoeVA]

Glad my video helped. Thanks for the comment.

[@frankherrera6421]

I don't have the connecter on mine what should.i do

[@tinkeringjoeVA]

You don't have the have the connecter on the car harness as in someone cut it off?

[@devotedanaheim1575]

@@frankherrera6421 is the orange cable coming off the ignition switch ?

[@chrisberry7060]

I just bought a 1994 Love your channel

[@tinkeringjoeVA]

There are fun cars. Thanks for the comment

[@joeb9553]

Joe, the real way to tell if it works is to have a key made without the vats resister and try it. the vats bypass you installed has the resistance needed. This allows you to have keys made that don't cost a fortune.

[@tinkeringjoeVA]

Thats right. Im gonna get one made and give it a try

[@gerardoemiliano2245]

instaBlaster.

[@devotedanaheim1575]

I have a key done without a chip and my corvette don’t want to turn on has Securuty light on also you think a I need a bypass for I to work ?

[@don7680]

And the "real way" to spell resister is resistor.

[@thaddeauscaldwell7101]

​@@devotedanaheim1575 , yes

[@frankondrovich8122]

Is the orange wire with the black tip on it that comes from your key switch

[@tinkeringjoeVA]

That's correct if i remember right

[@whitefreeman5798]

my problem is i lost the original key and i only have a spare that does not have a resistor.. some of us need to find out what resistance our cars/trucks need

[@rotorblade9508]

a potentiometer should work but you need to try many values. ps check for the resistance table, there is a list of ~15, so it won’t take long, you can begin with the most popular. I see it’s an old post maybe someone else needs it

[@tinkeringjoeVA]

There's a link to a resistance chart in my description for the video if anyone needs it

[@whitefreeman5798]

@@tinkeringjoeVA thanks guys.. i will check out the chart and see if i can make something work

[@BuffsGarage]

So the security system had a VATS bypass on it but if you didn’t have the viper remote and wasn’t using the remote start/ security system then it likely disabled the car until it could have the viper reprogrammed. Eliminating it as part of the problem was the simplest way to go.

[@alajuanlewis2762]

Wondering can yu read code from wiring harness if yu dont have keys?

[@tinkeringjoeVA]

Im not sure. I will have to look into that

[@jennifer-vm1ud]

A potentiometer can enable you to create a variable of resistance values and not having to guess which of 15 you have by buying one of each.

[@davidbigley789]

Thanks for the video. I bought a 92 Cadillac DeVille for super cheap that was not starting. I was able to start it only after the battery had completely died, and I jumped it. Drove perfectly until I shut it back off and tried starting it again after the battery had charged. Security light comes on when I try to start but the starter cranks no problem. Could this be a VATS issue? Most people say the car won't even crank but I've seen one person saying it could crank and just prevent the injector pulse. Also have an aftermarket key fab that does not really work. Any advice much appreciated 😁

[@tinkeringjoeVA]

From what I have seen you get no crank with a bad VATS. But I have read where you will get the car to turn over with no crank, Strange things have happen. I would give it a try. The VATS bypass I used was fairly cheap. I think it was $10. Would the car turn over after shut off?

[@davidbigley789]

@@tinkeringjoeVA thanks for the reply, but no after I jumped it that one time I have not been able to start it since. I even tried letting the battery completely die and jumping it again. I really think it's something electrical seeing how it drove perfectly fine

[@tinkeringjoeVA]

Does it turn over?

[@dougekren6495]

Joe I think your cars vats was already by passed, because of security system?

[@tinkeringjoeVA]

@Doug Ekren Your correct. But I was just trying to bypass the security system by putting the normal bypass in the car and make a video of how to do the bypass. If that makes sense. The viper system its causing problems. So I'm trying to take it out

[@waltermoore8949]

I had a remote starter on my car but i had it disconnected awhile back and I could start it with a regular key .came home one day i started up cut it off and now it won't start. What do you think?

[@tinkeringjoeVA]

Have you tries cleaning the chip in the key? Is your security light flashing?

[@waltermoore8949]

I also forgot to say the battery was disconnected for a while before I got a chance to start it could that cause the system to go haywire

[@tinkeringjoeVA]

Well I guess it could. But I personally don't think it would

[@JacksonCash-rs4lt]

I have been unable to find the right wire any suggestions?

[@tinkeringjoeVA]

It should be the only two wire connector the goes towards the ignition switch if I remember correctly

[@ronaldpricejr1952]

Do you know a way to find out what key you need if you don't have a key for it

[@tinkeringjoeVA]

You should be able to take VIN# to a dealer. And they can get a key for it. Or replace the ignition switch

[@terryhall5811]

What was those 3 relays under the dash go to.

[@tinkeringjoeVA]

They went to the aftermarket 90s alarm

[@davidmenchaca3509]

1994 corvette security problems ! I need help with vats

[@tinkeringjoeVA]

I can try to help. What do you got going on?

[@emymikeguillen7795]

I don’t see the chat for resisters Can you please send me the chart for resisters I have 1989 Vett

[@robmccall7014]

My 89 c4 has this problem friend of mine used ohms to fix it but it stalled again ordered a bypass system need help on hooking it up can anyone help please

[@tinkeringjoeVA]

Which bypass do you have? The one in my video is plug and play basically.

[@robmccall7014]

@@tinkeringjoeVA I used ro ohms that worked for about a month but I ordered a bypass thing from Eklers corvette Las night

[@tinkeringjoeVA]

@Rob McCall ok let me look into it and see if I can help in any way

[@robmccall7014]

@@tinkeringjoeVA great thank yiu so very much

[@tinkeringjoeVA]

@Rob McCall after looking at it on ecklers, it seems to be plug and play. Find your key ohms reading and purchase the corresponding bypass. Once you have the correct reading and bypass, find the two wire plug under your dash unplug and plug the bypass in. Besure to disconnect your battery before installing.

[@giomateo6443]

Does the chart work for the gator bypass with all 15 resistors built in?

[@terrylecce8131]

Thanks for sharing!

[@tinkeringjoeVA]

No Problem

[@nathanfultz2996]

What store sale the vats security bypass?

[@tinkeringjoeVA]

Ebay.. But you can buy resistors from a electronic store or online and put them inline for the VATS. If you buy resistors they need to match the reading of your key same as the bypass would

[@yz250jim]

Rooster stealing the show.

[@tinkeringjoeVA]

Yeah he is a showoff

[@almightytwisted935]

Does it matter what way the resistor goes on. ?

[@Orrinwellsbigo]

What were the problems you were having with your C4 was your security light blinking after a car shut down or was the car never able to turn over?🤔🤔🤔🇺🇸🇺🇸

[@tinkeringjoeVA]

Most C4s with a VATTS problem I have seen they won't turn over. But I have also heard that you can get the security light blinking and no turn over with a VATTS issue.

[@ricardoguzman7167]

I would like you eat the black chicken for a sancocho con ñame & yuca. So you could explain better. An advice.

[@bbay1977]

Did you ever get the alarm disconnected?

[@tinkeringjoeVA]

I sure did James. I took it to my local car radio shop, and they removed it for $65.00.

[@bbay1977]

@@tinkeringjoeVA I was going to tell you to just research the model and you might be able to buy a used key fob for it cheap. It may have had remote start on it as well. At least you got it removed.

[@vleqz9554]

is the VATS keycode for any module? or are they specified?

[@tinkeringjoeVA]

Should be the same for most GM vehicles. What are you working on?

[@vleqz9554]

@@tinkeringjoeVA a 2001 v6 camaro .. it wont crank at all hopefully this solves my problem. i looked online for the piece you had in the vid but it was out of stock so i ordered a different VATS bypass module from GatorTools

[@tinkeringjoeVA]

If the one you bought matches the chip in the key you should be good. If thats the cause of your problem.

[@vleqz9554]

@@tinkeringjoeVA ok, thank you for the vid ill let you know what happens i also subbed.

[@edwincolar7646]

what happens if you used the bypass and still doesn't start is this the starter kill causing the problem

[@tinkeringjoeVA]

i would check that you have the key code that matches the bypass correct first, then check fuses etc and last make sure your starter is working correctly. whats you security light doing?

[@mikep47]

I have a 94 Coupe and everything works on it amd i have no lights on at all. Question is could my VATS already have been disabled? I tried to program a key fob i got for it a while back and the security light you program it with would not come on. When you delete the VATS does it do this. The light i am referring to is located on the Info center over the radio. Thanks in advance Mike

[@tinkeringjoeVA]

my security light is in the instrument cluster on the left hand side. I guess its possible that its already bypassed. you will have to check under the dash and look for a resistor

[@mikep47]

@@tinkeringjoeVA will do joe . I drive it a lot during warm weather and I’d like to go ahead and bypass it if it’s not i don’t wanna get stranded

[@Billyjohn1961]

What year is your c4

[@tinkeringjoeVA]

94

[@Trollet456]

security sytem fail in my jeep grand cherokee -97 it starts and stops starts and stops

[@tinkeringjoeVA]

I could be wrong. But I thought most of the issues with Jeep Grand Cherokees were in the ignition switch itself

[@waltermoore8949]

Is the place that you got the bypass from still there

[@tinkeringjoeVA]

Yes. There is a link to override_motorsports on ebay in the video description

[@robertgardner9130]

My resistance read 6.025 What # bypass 1-15

[@rotorblade9508]

why not just solder a 6k resistor on a cable then use heat shrinking tube over it. next crimp a 2 wire connector. the resistor can be a trimmer so you can adjust it to the exact value. You will need a crimper -$10, and soldering pen or station.

[@tinkeringjoeVA]

According to the chart in the description. I would say 12

[@tinkeringjoeVA]

That works well also

[@robertgardner9130]

@@tinkeringjoeVA thank you..I was thinking 12 or3 Thank you for getting back to me so fast ..

[@tinkeringjoeVA]

No problem.

[@barneywarwick9804]

Mine was the Lock cylinder 95 Camaro V6 3.4 any one else have the same problem with the lock cylinder 😊

[@joelk7725]

So, did the car previously not start?

[@tinkeringjoeVA]

it started up fine. just wanted to avoid problems in the future

[@sportsmansparadice42]

What year is your Corvette?

[@tinkeringjoeVA]

its a 94

[@worldsgonemad4600]

Actually the easiest way is find the pcm and cut the grey/ green wire that feeds the fuel pump relay 12 volts. On the fuel relay side solder a on/ run fused 12 volt source( something like the wiper motor, of rw defogger). Poof done. Anyone thats worked in shops that's never done this is a gd liar.

[@CarlosScheer]

the orange is supposed to be cut i thought

[@frankondrovich8122]

Plug the end going to the computer

[@Chevy-Guy]

What a pain in the ass system! My Brother in Law has a Hummer H3 that has random issues with the Vats system and I had a friend at work who had issues in his car with it also. Just like most other needless crap in modern cars its just something when it goes south its either a band aid type amateur fix or its off to the dealer for expensive repairs and reprogramming. Instead of this PITA system I think they should just give car thieves the chair and televise it during prime time as a theft deterrent. Think modern gas vehicles are bad just wait until everyone is forced to buy an electric car that we wont even be able to work on.

[@raymings1323]

find the ground and cut it. that should take care of that.????????/

[@tinkeringjoeVA]

I had it removed and wires repaired. Thanks for comment

[@sportsmansparadice42]

Your accent sounds like Louisiana?

[@tinkeringjoeVA]

Thats crazy I have never even been close to there

[@paulmoss7940]

Commonwealth of Virginia ,Sir.

[@JacksonCash-rs4lt]

I have been unable to find the right wire any suggestions?