FYI: I mention in the video that there are no instructions, that's WRONG, there are instructions, really good written ones are included. Also, for those that have bought previously, you can login with the same email you used to purchase and you'll be able to get the latest version. One more thing, it looks like CURA now has per-material shrinkage compensation in the latest Beta version so I'll be sure to make a new update for that. (upgrades are free) Merry Calibration, and Happy Printing!
@curtisevans73442 жыл бұрын
i am having some issues with your website, i cant get the captia to show up to request help with this. i bought the original and cant access my account to update is there a better way of getting in touch with you about this?
@TheLordinio2 жыл бұрын
got the calibration flower today, in order to use it to calibrate materials that crystallize when annealing and as such shrink significantly. would be really cool to add features to calibrate in Z direction too for these materials
@zola5584 Жыл бұрын
why the model this expensive, this price a bit pricie
@sonicdudemgvids34512 жыл бұрын
Percentage compensation in cura is actually on a material basis. You can add it to material settings and put it for the material you are using. You just have to add it as an option.
@sandrolauer3502 жыл бұрын
@Vector3D: Kind remark from an mechanical engineer: please don't advise calibrating machine settings on material base. Steps per mm should be calibrated with calipers, not with an actual print, because of the dependency of material flow, extrusion temperature and fan speed causing shrinking, with ABS shrinking in general... You get the point. I love your Califlower for material settings calibration though. Good job 👍 🙂
@Vector3DP2 жыл бұрын
From the start it was always for shrinkage and skew. But some people can't integrate shrinkage well, so steps/mm is just for them really.
@stvcolwill Жыл бұрын
Thanks so much for this video and calibration method. You've put in a lot of time and thought and testing into this. Kudos and hats off to you my good sir! I'm printing the first one now!
@billychampy316 Жыл бұрын
Great work my friend. Very cool, I will try your new Califlower 👍
@johnbeima64132 жыл бұрын
The Overhang & Bridging stls were/are extremely helpful. :) The overhang test helped nicely to set SuperSlice’s angle for overhangs as well as to see where cooling lacks. The bridging was a nice simple test. Sometimes all the really fancy ones just over complicate things. These were two simple stls that worked just so nicely. It will be disappointing to no longer have them included in our package updates. Sure they may lack the extra docs, but sometimes a simple stl is nice to have. :)
@Slavfot2 жыл бұрын
I bought the califlower a couple of days ago and did not get the overhang and bridging stls. I would love to have those. Is there any way to get these now?
@andrewlee41025 ай бұрын
Fixed my dimensional accuracy issues on my BambuLabs P1S, Thank You!
@nmavor2 жыл бұрын
how about PLA vs ABS ? is I'm using ABS do I need to resize it by 100.5% ?
@smittery2 жыл бұрын
Note about Cura, the 5.1 beta DOES have shrink compensation for specific materials now.
@Vector3DP2 жыл бұрын
Oh that's good 👌
@daimhinm2 жыл бұрын
Would be cool if you added a solid base layer so you could use the multitude of Califlowers printed as drink coasters.
@devilik3692 Жыл бұрын
thing is with rotation distance in klipper it specifically tells you that numbers should be whole
@x_jaydn2 жыл бұрын
Hey Vector 3D, if we've purchased the old Calibration Flower v7, will we have inclusive access of the new Califlower? 🤔
@Vector3DP2 жыл бұрын
Yep
@CTZN18 ай бұрын
i have question, thinking to buy this but i got questions need to answered. 1. Does it applicable to my printer, ender 3 v2? because the website mentions prusa and prusa, makes me think oh this only for prusa? 2. how do i input the correction into cura? especially the X Y errors?
@Milfeldt2 жыл бұрын
I'm happy 😁 Got XY down to 0,01 -0,01. and skew I/O to 0,00 -0,01 Before calibration they were -0,3 -0,4 and -0,4 - 0,27
@BinaryDisastr6 ай бұрын
You mentioned Pursa Slicer and Cura. Is this something that would be worth while for a Bambu? Namely PS1?
@karlos93712 жыл бұрын
You appear to have all the information needed from inner and outer measurements. Is it possible to add extrusion multiplier adjustment calculation too?
@PhilipHollowaychannel Жыл бұрын
Can I use this on the ender 3 S1 pro. I use Cura as the splicer.
@ellafoxoo2 жыл бұрын
Might make a Califlower coaster holder for the new apartment xD
@panInformator2 жыл бұрын
Hi! Thanks for amazing work on XY calibration. Do you have a solution for Z calibration as well?
@BIEDZ_3D_RC6 ай бұрын
I've printed this multiple times, and I cannot get the skew to 100. One side is always over 100 and the other side is always under 100, any tips? What am I doing wrong? Thank you!
@Vector3DP6 ай бұрын
You're unlikely to get it perfect, there's no such thing as perfect when it comes to manufacturing. You should be able to get close though.
@BIEDZ_3D_RC6 ай бұрын
@@Vector3DP ya, I understand that, but I was getting it around 100.6 and 99.6, then when I tried it again, I got somewhere around 101 and 99 I think, I can't get it anywhere close to 100 though.
@legacyofbob2 жыл бұрын
Maybe this was addressed in the video but I missed it, but is this only for Marlin? Is there skew correction for RRF/Klipper as well?
@woodwaker12 жыл бұрын
He has it for Klipper and Rep Rap
@legacyofbob2 жыл бұрын
@@woodwaker1 thanks!
@woodwaker12 жыл бұрын
@@legacyofbob I just purchased the files , seems like a inexpensive solution if it helps at all. It's in my project Que.
@matthiasreisenauer31762 жыл бұрын
But still the same question like an CR-30 you cant really use your test would you like to improve it also for it ?
@pattygq4 ай бұрын
Is this design and calibration object still relevant 2 years later? Have there been any updates/changes to it?
@Vector3DP4 ай бұрын
Still the best method available. Quite a few free updates to it too.
@pattygq4 ай бұрын
@@Vector3DP Ok cool. Thank you. In the chart on your shop page I see Cura isn't supported. Does that mean that the corrections this Excel file proposes aren't supported in Cura? As in there's no place to enter the changes? I'd gladly make the jump to Orca if I could copy over my tuned Cura filament profiles successfully.
@Vector3DP4 ай бұрын
@@pattygq Yep, cura is just not great for the shrinkage compensation because it needs to be per filament and it isn't setup that way.
@pattygq4 ай бұрын
@@Vector3DP Gotcha. Thanks!
@hansdampft5612 жыл бұрын
Can you please offer other payment options? I tried to by calibration test method from your store but my EU Visa card was not acctepted!
@Vector3DP2 жыл бұрын
Stripe accepts all cards AFAIK so if it failed it was for another reason. PayPal is also available though.
@hansdampft5612 жыл бұрын
@@Vector3DP Thank you very much! I have bought 2 because I think 5 pound is a a little to cheap for the time and effort you you invested!!
@Wittmason7 ай бұрын
Does anyone know if this is useful for calibrating a delta 3d printer? Has anyone actually done it before?
@farnaby132 жыл бұрын
Thank you for your work on this.
@cgrosbeck2 жыл бұрын
So ESteps and flow needs to be done prior to printing the Califlower. Altow through my understanding in the video it works to a center line.
@davidbucek2 жыл бұрын
You cant set % shinkage per material in Prusaslicer but you can set it in Superslicer! :)
@StargateNeo2 жыл бұрын
All for the community 💸
@harryhino2267 Жыл бұрын
if it was free.
@bravenkind78432 жыл бұрын
Thanks so much for your work on this! I bought the calibration flower from the link on the old video. Is it the same product?
@RhapsodyInBlaah2 жыл бұрын
Sorry if this is addressed elsewhere, but can this be used with a Prusa Mk 3? I bought it before I remembered there might be firmware issues.
@willl842 жыл бұрын
So if we bought the last one is this update free?
@Vector3DP2 жыл бұрын
Yup
@VagabondTE2 жыл бұрын
I know this is a completely different type of programming and probably not even possible.. but is there anyway to write an app that can take these measurements from a picture? With like, a quarter also in the picture? Considering the amount of recalibration that 3D printers generally need, even an app with ads should generate enough revenue to approach an app programmer.
@Vector3DP2 жыл бұрын
I think we're a long way from a camera being good enough to capture the resolution needed for this level of calibration.
@smittery2 жыл бұрын
Yeah, these size measurements would be VERY difficult to catch on a standard camera, what with perspective and lens distortions and everything else. HOWEVER, your idea isn't far off for structured blue light scanning (revopoint pop mini) or lidar (Bambu X1), and the califlower+included methodology may be a good baseline for making the tuning tooling that pair with those emerging technologies to dial-in the crap out of future printers.
@c3h4organic972 жыл бұрын
Just have the email of the purchase but no account to download the new version. Where do I get it?
@bolek22 жыл бұрын
Click on "My account" and then "Lost your password". It will send you e-mail to reset the password. After you do this, log in and the files should be there in the Downloads section.
@jscancella2 жыл бұрын
Are the updates free to those who have already bought the calibration flower previously?
@Vector3DP2 жыл бұрын
Yes, for those that already purchased, you should already see these files available to you. Just need to login and download.
@icanthelplt902 жыл бұрын
I literally just bought this like 4 days ago lol and now you changed it. I think i got the new one though as it has step/mm in it?
@Vector3DP2 жыл бұрын
Yep, it's been there about a week. You get all updates free anyway though so don't worry :)
@HoffmanTactical2 жыл бұрын
This is super cool.
@Vector3DP2 жыл бұрын
Thanks 😊 I think so too!
@paulmenzel2884 Жыл бұрын
I found this interesting enough I had to reverse engineer it myself. couple things: a) Skew the Marlin AD distance, 100*2^-0.5, doesn't that need to be scaled? That is the perfect value and the AC and BD are in a scaled space. b) if the Avg X Error and Avg Y Error are different wouldn't that indicate one of the axis has its Step/mm off. I'd expect them to be the same if only material shrinkage was at play. c) seems to me flow compensation could be calculated. Scale the measurements by the Shrinkage / Step/mm Then calculate the Inner/Outer Error off the new values. d) If you know Skew setting for a set of measurements. The new value is just the sum of the measured angle and the prints skew setting angle.
@pdzed2 жыл бұрын
CaliCoaster?
@darren9902 жыл бұрын
So how do you use it lol
@Vector3DP2 жыл бұрын
Check the first video, or the instructions that come with it.
@the_futur1st2 жыл бұрын
I have bought a califlower a couple days ago. Unfortunately i did not create an account. The tip above "go to My account and click reset password", does not work. The system throws the error message "Invalid username or email". Is there any way to update my califlower to the latest versions? A little proposal, as you mentioned in the video a califlower can shows us underextrusion and overextrusion cases, it would be easy to add the field for starting flow number and calculate an assumption flow value to minimize this error.
@Vector3DP2 жыл бұрын
YT comments not the best place for support, but just make you use the same email you purchased with.
@dr_gotheem38992 жыл бұрын
I have been using the Califlower to commission my E3D TC. Incredibly helpful! And thanks for the tip on line thickness, I think it explains my slight discrepancy between internal/external measurements.
@DIYunpolished2 ай бұрын
You should offer a free version now since it's been 2 years. Make it smaller so we get less correction lol but still be able to help people who have no funds. (Me)
@Vector3DP2 ай бұрын
I already gave away over 3k units of this for free. I'll let you do the maths on that.
@TommiHonkonen2 жыл бұрын
you could call it calicoaster
@AndrewGillard2 жыл бұрын
It looks like KZbin is now auto-generating chapters from on-screen titles and it's thoroughly confused by your animation :D L Explanations 7 L Iteration 7 😹
@AbruptAbacot2 жыл бұрын
Califlower? Mmm gotta love that OG indoor. Don't ship this across state lines folks. You wouldn't download a weed👁
@megaobi2 жыл бұрын
this is fnatastic!
@Shykar011 күн бұрын
13€ is way too expensive for a personal use license.
@MisterkeTube2 жыл бұрын
I'm probably going to be labeled a cheapskate for this remark, but I'm going to state it anyway (probably because I am a cheapskate): if you want this to replace calibration cubes, then make it free!
@nakwadroid2 жыл бұрын
I second this!
@mochmaster45 Жыл бұрын
I would say make the stl free but add an option to buy the spreadsheet that auto-calculates for you.
@stvcolwill Жыл бұрын
honestly, and I don't mean any shade, but I humbly think you're missing the point. it's not that you're a cheapskate. I see it that it's worth way more than the money charged because it saves me time and I'm getting a huge bargain on all the time and effort and skills this man has put into this project. If you were truly a cheapskate, you could create this yourself easily and negate having to pay. I haven't seen any other calibration that tells me this much information which is also laid out so straight forward and simply. I was literally in the process of setting up my own inner and outer measurements thingy when I stumbled on this man's project. So, so, so worth it. Again, I mean no disrespect brother!
@jamy64317 ай бұрын
Yeah, if the product pays for itself then it's a net positive and is actually saving you money.
@odyss1602 жыл бұрын
looks more like a waffle
@mrCetus2 жыл бұрын
I have been using the Califlower to commission my E3D TC. Incredibly helpful! And thanks for the tip on line thickness, I think it explains my slight discrepancy between internal/external measurements.