🏆 The BEST DTF software 🏆: RIP Cadlink Digital Factory DTF

[@john-0316]

😢I have a converted Epson ET 8550 printer and I have had nothing but problems with this RIP software. Repeated paper jams and other issues only happen when printing from this Rip software.

[@brildoren7440]

Hello Shareen. I'm sorry to hear that. You should contact Cadlink support as we do not distribute this printer model. I really hope you find a solution 😊

[@deeznuttz7980]

can i connect to network and not usb

[@rramos1557]

What heat press are you using?

[@brildoren7440]

Hello, we use the Brildor XH-B2N. Check all the info here: bit.ly/xhb2n_en It's a great heat press machine!

[@skywork786]

Can I used Cadlink on Chinese meitu digital dtf printer ?

[@brildoren7440]

Hi, there is no native support. You could ask the Cadlink team to develop drivers for your machine, but it would require an additional cost.

[@deeznuttz7980]

what's the cheapest software

[@GPFMotorsportNews]

Hi there, does the software work with a Epson R1390 based printer and where can I order online (I am in Romania)

[@brildoren7440]

Hi! The answer is yes. You can get the software here: www.brildor.com/en/rip-software-cadlink-digital-factory-v-10-dtf-edition But, before buying the whole thing, we recommend the 15-day trial version which you'll find on the product sheet.

[@jondrive8801]

If I go on a 2 week holiday... can you set cad link to print once every 24 hours? just to keep the ink moving? Thank you

[@brildoren7440]

Hello Jon, you can actually set it to do clean-ups, not printings though, but this is a great way to keep the ink moving.

[@18primo]

@@brildoren7440 how do you do that?

[@jordanlotus188]

nice

[@mustapharafik2061]

what about the pictures sizes ?

[@brildoren7440]

Hello, the size of the image should match the size of the print. As for resolution, it should be a minimum of 200 dpi.

[@dianacoellen2565]

Does it work for the epson sc p6000?

[@brildoren7440]

Hello Diana! The Epson sc p6000 is not natively supported. But you can contact Cadlink to find out if they are going to incorporate this model in an update 😉

[@AbdulHadi-qe7vc]

Will it work on l805 epson

[@brildoren7440]

Hello, Abdul. Yes, the software works with that printer too!

[@generdonina]

Hi! Does this software work on Epson L805?

[@brildoren7440]

Hello! Yes, it does work 😊

[@TylerUnknown]

Hey, how well does it go with this printer?

[@deeznuttz7980]

is this a digital download and how long can you keep this download once you purchase it?

[@brildoren7440]

Hi! Here's the link to all the info: www.brildor.com/en/rip-software-cadlink-digital-factory-dtf-edition

[@deeznuttz7980]

@@brildoren7440 thanks but it asks for some kind of code before purchasing

[@deeznuttz7980]

ignore that message

[@deeznuttz7980]

thanks I'll check it out

[@katchapi]

This software works for every dtf printer?

[@brildoren7440]

Hello, Nuno! No. There are only a few drivers available for the most commonly used printers. If you tell us your printer model, we can tell you if it is compatible.

[@KaffieTV]

My model is xp 15000 would it work?

[@lionelpgowyngard3199]

L18050 can it work

[@dnrcreativedesignsllc265]

Does this software work with epson ET 8550?

[@brildoren7440]

Yes! It also works with that printer model

[@john-0316]

I have a converted Epson ET 8550 printer and I have had nothing but problems with this RIP software. Repeated paper jams and other issues only happen when printing from this Rip software.

[@shaancent191]

@@john-0316 Hello im going to buy 8550, please do me a favor and tell do's and dnt's

[@capturedbyfabian]

WHERE IS THE ORIGINAL VIDEO? Without the guy talking on top of it. I get it that is in Spanish that's fine. The talking on top is very annoying

[@brildoren7440]

Hi Fabian. That's because you're on the English channel. Here's the link to the Spanish version: kzbin.info/www/bejne/d5WwhnyIid5-r9U