best overall explanation on the removal of a 2nd gen tundra bumper.. Thanks!!
@lukeshaia5 ай бұрын
Glad I could be of help!
@coltonbowlden11372 ай бұрын
Just installed my Hooke in my tundra thanks for vid bro easy to understand homie. Thank you get the skid it looks rad
@lukeshaia2 ай бұрын
Appreciate it!
@ulrblitzer3 ай бұрын
Thanks for this. Ran over some road debris. Have this bumper coming in today.
@lukeshaia3 ай бұрын
Sweet! It’s gonna look sick!
@geraldtran99772 ай бұрын
did you have to cut anything? does fender liner line up with the bumper? looks great!
@lukeshaia2 ай бұрын
No cutting required, the fender liner you remove the bottom section and throw the two clips back in on the top section and you’re good to go!
@sniper5245 ай бұрын
I got a huge dent in my bumper that just happened so I’m gonna have to replace it. I think I might go this route.
@lukeshaia5 ай бұрын
You should, they’re dope!
@sniper5245 ай бұрын
That’s sick 🎉
@lukeshaia5 ай бұрын
Thank you!
@blessedohanaoverland3 ай бұрын
Good stuff. How are the fog lights mounted? Also, how sturdy is it? Good enough for some light off roading?
@lukeshaia3 ай бұрын
Very sturdy! The fog lights are bolted in through the rear. Easily accessible with the fender liner removed.
@jare23200326 күн бұрын
No sonar detector ports?
@lukeshaia26 күн бұрын
???
@nic_magin7 ай бұрын
Add Hooke Road Bumper to your tittle. I found your video by accident. You'll probably get more traffic if you add that name to the title.
@lukeshaia7 ай бұрын
Appreciate it!
@geraldtran9977Ай бұрын
my 2011 tundra did not come with factory fog lights, does bumper come with all wirings and relays required to install the foglights? thanks!
@lukeshaiaАй бұрын
It did not, it comes with the Foglights and the ground and power wires, I got a connector off Amazon to be able to wire them into my factory Foglight connections.
@lukeshaiaАй бұрын
Shoot me a message on Instagram if you need some help! It’s luke_shaia
@TeddySwolesevelt26 күн бұрын
@@lukeshaiawhat connector did you get off Amazon for the fog lights?
@lukeshaia26 күн бұрын
@@TeddySwolesevelt I used these a.co/d/3sJQkbx
@bicmitchum4091Ай бұрын
Does this weigh more than the stock front bumper ?
@lukeshaiaАй бұрын
I would say most likely yes, the entirety of the new front bumper is heavier, but it includes the front subframe. You remove the old bumper and subframe and replace with this bumper.
@AlexanderHernandez-dd5vj2 ай бұрын
What do you use to connect the black and red wires coming off the fog lights to the truck wiring?
@lukeshaia2 ай бұрын
I bought a male & female connector package for my fog light bulbs, and wired the male connector to the fog lights so that it would plug into the existing female connector on the chassis’ wire harness. Here’s what I bought: a.co/d/0gxlcrRf
@lukeshaia2 ай бұрын
Give this video a look: TOYOTA TUNDRA FOG LIGHTS DONE!! #shorts kzbin.infoqGoMPJm2fYg?feature=share
@monetsengnalivong64716 ай бұрын
You didn't install the led bar in the center ? I'm planning on getting this for the front n rear 2015 toyota tundra trd pro crewmax
@lukeshaia6 ай бұрын
No I didn’t, I’m still deciding if I want to or not :/
@monetsengnalivong64716 ай бұрын
@@lukeshaia it looks greats bith ways with or without still beautiful 🤞❤️❤️🥴🥴🥴
@ahmedabdullahi43054 ай бұрын
Hey Luke question bro, isn’t the crash bar there for a reason? Feels weird removing sum that would help in case of an accident ? Just wondering brotha
@lukeshaia4 ай бұрын
It replaces the crash bar, because it will do the same thing a crash bar does. A typical front bumper is designed to squish, the crash bar takes the hit. In this application, the bumper is now designed to take the hit.
@ahmedabdullahi43054 ай бұрын
@@lukeshaia thanks bro, I feel more comfortable getting it for my 13 tundra now…u ever planning on getting a light bar for the roof or it’s not worth it ?
@lukeshaia4 ай бұрын
@@ahmedabdullahi4305not for this truck. I did on my last and had to put holes on the body of the truck. Wasn’t a huge fan of it.
@jeffsweet30486 ай бұрын
Did you replace the grill on this Tundra but keep the surrounding trim? Looks nice!
@lukeshaia6 ай бұрын
Thank you! I actually replaced both. Mine is an 07, which came with the bulkier surround. 2010-2013 has the slimmer look, so I swapped to a 2010-2013 surround and the TRD insert.
@jeffsweet30486 ай бұрын
Did you have fitment issues on your grill? Mine is not sitting flush against the vertical mounting suppports...
@lukeshaia6 ай бұрын
@@jeffsweet3048do you have a 2007-2009 or a 2010-2013? The 2007-2009 you either have to remove them, or order the 2010-2013 ones. I don’t have them on my grille, since mines an 07.
@jeffsweet30486 ай бұрын
@@lukeshaiamy truck is a 2012
@lukeshaia5 ай бұрын
@@jeffsweet3048Interesting, it should be an easy swap then. Not sure why it wouldn’t fit.
@brandonholt55446 ай бұрын
Do you have a instagram ? I’d like to see more on the bumper and ask a few questions before I buy
@lukeshaia6 ай бұрын
Yes I do, it’s Luke_Shaia
@mw3fanboy67 ай бұрын
Should powder coat color match them to that white and that would look 🔥🔥
@lukeshaia7 ай бұрын
That would look pretty sick!
@tunikaranja53965 ай бұрын
YOU HAVE TO UNINSTALL THAT CRASH BAR IN THE MIDDLE HE FORGOT TO SAY THAT 🗣️🗣️