The Best Home Filtration System - Springwell Whole House Water Filtration System

[@vinnygoombatts1458]

Been a plumber for over 25yrs. Some thoughts, 3/4 pex actually has the same diameter of 1/2 copper. Your flow is severely restricted. I just installed one of these systems with the UV light. I used ALL 1 inch pex so flow is not restricted in any way. Also I installed a complete bypass of the whole system so any maintenance can be done without having to turn off water to the house. I also presoaked the carbon filter and flushed the whole house after install, very important.

[@DIYTutorialGuy]

Thanks for contributing, love the username!! Not much I can do about the 3/4” pex in the house. It’s how it came, and honestly, we have no issues with water pressure. Re-running new lines would cost an arm and a leg! In regards to filling the tank and flushing it after, at the 0:17 mark I clearly explain you need to fill it and let it sit for 48 hours. 😑😑😑 As for your setup, it sounds like the work of a seasoned plumber. I’m just a homeowner trying to do the best I can. Thanks again for contributing!

[@vinnygoombatts1458]

@@DIYTutorialGuy You're showing your age if you recognize the username lol. Good job as a diy. Just pointing out some professional differences. You will know there is a flow restriction when you're taking a shower and someone turns on the washing machine dishwasher or flushes a toilet. Prepare to be burned! Lol!

[@DIYTutorialGuy]

Seems you and I have been around the block a few times! 🤜🤛 Your advice is great, and you may get a comment from me in the future if I have any plumbing questions! Man, my last house had that issue; flush a toilet while in the shower you got scalding hot water. Ouch! When we first bought the house the toilet would occasionally run. No big deal…until you are in the shower thinking nobody will flush, then the toilet starts filling again!

[@patriotparkinglotservices-8881]

@@vinnygoombatts1458 I am purchasing this unit and it is going to be installed in our well closet. All of our connections are located at absolute floor level. Will I have issue if I run flex tubing from the top of the bottle down to floor level on of inlet/outlet sides?

[@mr.anthonym.leavysr.7512]

Thanks, I hope I have the same success...no plumbing skills 😒

[@wizardmaster6639]

Hi Dadda ! priceless.. love it when my little ones say.. Hi Da!! melting hearts!

[@DIYTutorialGuy]

It’s definitely good stuff!

[@29dj17]

I envy the dad part lol. Wish I had that. He was a good guy though. My sister the procrastinator got a filter for our family house and never got it installed, been sitting there for years. Just saw it in our store room everything still in the package and dusty. That’s how I got to this video. I’m a pretty handy guy so I’ll give it a shot. Excellent video thank you very much.

[@DIYTutorialGuy]

I am fortunate to have my Dad with me, as he’s bailed me out of more mistakes than I can count. It sounds like you still have some good memories, which are important. Good luck on the install, and drop a comment if you need help. Myself, or the community here, will help!

[@29dj17]

@@DIYTutorialGuy Thank you so much. I definitely will. Thanks for the support.

[@DIYTutorialGuy]

How did the install go??

[@Silent-Lucidity]

I'm installing my system this week. No one has the 3/4" PEX x 1" FNPT adapter I need. Had to order it online. I'm also using 3/4 PEX. I bought the crimp tool to and will use the rings to secure the connections. It's going pretty well so far. Thank for the video, it helped me plan my project.

[@DIYTutorialGuy]

Nice work, glad this video helped! Keep me postrd.

[@johnstorzillo]

NOT ONLY IS PEX B 3/4 REALY 1/2 " COPPER SIZE, BUT ALL THE CONECTORS ARE REDUCED EVEN FARTHER. PEX A LIKE UPONOR IS 3/4" NICE MEASURMENT/ EYE BALL CUTS

[@_Wake_Up_If_U_Can]

Thanks for posting the video. In the process of designing our water filtration system which will be the Apec Brand. I am curious why you put the sediment filter after your main filter? In the videos I have seen so far, the sediment filter always goes first, then the more expensive filter(s). Overall was fun to watch your installation and explanations. Good job!

[@DIYTutorialGuy]

Springwell support stated it can go before or after. Their instructional video had it after the tank, so I did it that way.

[@phatsublime]

Looks good you did forget the bypass, in the event you get a clog or cant get a filter you would be able to bypass all of this. Easy to add right there where you have those 2 90s at your water inlet.

[@DIYTutorialGuy]

Thanks for watching and commenting. I chose to not install a bypass. If an event arises where I need to bypass the tank, it will be addressed at that time. Take care!

[@Mrcm30]

I believe that tank has a bypass valve included at the tank head and the tank can be detached while leaving the head/valve in place to do maintenance. The Springwell website has an image of this in the instruction on replacing the media.

[@jerhew8]

@@Mrcm30 yes but that's just on the main tank, if that sediment filter leaks, like it does in the video, they're screwed.

[@DIYTutorialGuy]

Wow, really driving it home.

[@jerhew8]

@@DIYTutorialGuy for the cost of 2 tees and an extra valve, it's absolutely standard practice

[@hdtvkeith1604]

How do you like the system after the first few months? Have you noticed any carbon dust in the toilet tanks or clogging aerators? That seems to be the biggest concern with users. Springwell told me to install sediment filter after the carbon, I am thinking I will need a pre and post sediment filter.

[@DIYTutorialGuy]

Good question! Everything seems fine since the install. No carbon dust or any clogs. I will be changing out the sediment filter next month, as it will have been about 4 months. Springwell says 3-6 months is a good timeframe to change it.

[@misclaudiarene6752]

thanks,,, I am going to try this. I dont have any help but I'm still buying

[@DIYTutorialGuy]

You’ve got this! Take your time, and don’t let stress overtake the job!

[@wizardmaster6639]

Good job - glad it all worked out for you

[@DIYTutorialGuy]

Thank you!

[@nealsanders4065]

I have a slight leak at both ends of the sediment filter. No dripping but wet to the touch. my plumber had to redo the fittings twice but still have slight leak. any advice? used teflon tape and pipe dope. still the same.

[@DIYTutorialGuy]

That’s a good question. My advice, and it’s only advice, would be to contact Springwell and share your situation with them. If you have documentation that the plumber tried repairing it 2x, then there may be a defective thread or something on the filter housing and Springwell can send you a replacement.

[@trenthollifield6969]

Use silicone grease on all o rings for lubrication and protects the rubber o rings from harsh water

[@SiDPT15]

On the Springwell website there is an available upgrade to the "Reverse Osmosis Water Filter System+ $457.83" is this one of those under the counter type systems or is it directly connected to the whole house filtration tanks?

[@DIYTutorialGuy]

It appears to be under the counter. Check the link below for more details: www.springwellwater.com/product/under-counter-filtration/reverse-osmosis/

[@billcampos445]

Im currently looking for a water filtration system. Do you recommend this one. How much is the replacement filter ?

[@DIYTutorialGuy]

We have been satisfied with the water quality of the water. I just tested the water the other week, mo contaminants. Now, to be clear, our city water is pretty good, this is just an added layer of protection. The replacement sediment filters cost roughly $40 and come in packs of 2. They last 3-6 months, depends on the user. The actual tank will filter roughly 600,000-1,000,000 gallons of water before needing to be exchanged.

[@mast3r860]

Great video!

[@DIYTutorialGuy]

Thank you, and thanks for watching!

[@brokentipz6425]

Great 👍🏽 detail

[@DIYTutorialGuy]

Thanks for watching and commenting!

[@iecuswilson2824]

I'm looking at Springwell right now. what made you go with them and even though it's not long since you had it installed, how do you feel about it after using it for a couple of weeks and can you feel the difference when taking a shower? my wife and daughter have eczema and I was told and read that filtering the water would help... Awesome vid

[@DIYTutorialGuy]

Thank you for complimenting the vid. It was difficult to get in clips of the work completed, so I’m glad this helped! Now, to address your questions. My biggest reason for choosing Springwell is that it is made in the USA. Now, to be clear, I’m not some crazy “‘merica” type of guy. I am a consumer that likes to know, and trust, where my water filtration system is being manufactured. The sediment filter is made in Italy, no issue with anything made there, as their compliance laws are in alignment with healthy living. I also chose this system because it came up as highly regarded in quite a few online reviews. The customer service is great, and the install was easy, even though it took about 6 hours. Last, I received a discount (on the already doscounted price) for being a veteran. As for the water quality, yes, I can tell the difference. For starters, it doesn’t smell like a swimming pool. It tastes clean, if that makes sense. No sediment, no funny taste. And yes, using to it shower or give the girls a bath is a completely different experience. We don’t feel so “weird” after bathing. Sorry, that’s the best description. Prior to installing the system, it felt like there was still something on my skin. Now, I just feel clean. Hope this helps, hit me back with any other questions!

[@iecuswilson2824]

@@DIYTutorialGuy Thank you! I ordered my whole house filter Saturday. I can't wait to get it and have it installed. It's good to find things made in America, lets support home before we look outside!

[@happydh]

@@iecuswilson2824 how do you like your springwell now? I am thinking to get one for my house lol

[@surbhitjain6735]

@@iecuswilson2824 How is your experience ? And which model you went with?

[@iecuswilson2824]

@@surbhitjain6735 I went with Springwell. Got the whole house system with the UV and the osmosis tank for the drinking water. I did my 1st maintenance a month ago and I couldn't believe all the stuff we would have drunk or bathe in, the filter was pure white when we started but at the 6-month maintenance check, the filter was jet black. We're happy with our purchase.

[@la_uruguacha]

thanks guys, great job

[@DIYTutorialGuy]

Thank you!

[@DIYTutorialGuy]

Subscribe to my channel and enter the $100 giveaway!

[@danilberzin3556]

Hey buddy I had the same exact issue even the same side on the filter was leaking I had to do I buy a new filter

[@DIYTutorialGuy]

Wow! Bummer you had to get a new filter. But I’m glad it’s working. To date I have had no leaks since the tale and pipe dope combo. Thanks for chiming in!

[@wanderingsoul2909]

Hi, nice video. If you install this system then does it both treat "hard water" ( calcium etc ) and remove chlorine etc ? The sediment filter doesn't do the above right ? So, the big tank carbon filter would do both ? Thanks :)

[@DIYTutorialGuy]

Thanks for watching and commenting! As for this system in the video, it does not treat hard water. If you need to treat hard water, there is a separate water softener tank you can add. It does remove chlorine.

[@wanderingsoul2909]

@@DIYTutorialGuy Wait, your last comment: "It does remove chlorine" refers to the carbon tank or the water softener tank ? Thanks

[@DIYTutorialGuy]

My apologies, the way I worded it was confusing. The carbon tank filters chlorine. The link below will take you the Springwell site: www.springwellwater.com/product/water-filters/whole-house-water-filters/?gclid=Cj0KCQjwuaiXBhCCARIsAKZLt3m7yV3_5zm4qo1EeqlqUZQEzSMD8g_b-S7QFhco26QxSRToCw9qo3gaAg07EALw_wcB

[@livestreampro5247]

Did you check ppm or ph level water?

[@DIYTutorialGuy]

Yes, but did not shoot a video the 1st time. Ordered a test kit, just shot the video, keep an eye out for the video in the next few days. Results are good!

[@livestreampro5247]

@@DIYTutorialGuy thank you so much!I just ordered hopefully it’s low ppm on your side!

[@bogusphone8000]

What did you use to go from copper to pex on your water feed?

[@DIYTutorialGuy]

Watts 7R Copper 3/4-in FNPT Dual Check Valve

[@cranbers]

Why did you put the sediment filter after the weater filter? One would think you woulnd't have much sediment making it through after the water filter ( at the same time clogging up the activated carbon filter?)

[@DIYTutorialGuy]

The directions from Springwell specifically state to install after the carbon tank. Chats with Springwell have stated the same.

[@ShortyViet1976]

Isn’t the blue pre filter supposed to go before the big black filter?

[@DIYTutorialGuy]

The manual states it comes after the tank: dpw4tdh0of7va.cloudfront.net/wp-content/uploads/2020/07/CF1_CF4-Installation-Instructions.pdf

[@natorious76]

I have this system in my house also and thought the same thing seems odd but maybe it's to catch any charcoal that might come out of the main filter I don't know.

[@Nothin9Specific]

I'm skeptical about purchasing this unit. Most filtration products use carbon/kdf filters that must be replaced OR backwashed. This unit doesn't incorporate either. Spoke with a salesman from Springwell and he claimed the system uses "Upflow filtration" and that "most systems do not require backwashing". Wondering if anyone else had any insight. They also removed the larger units from Amazon which had tons of 1 star reviews.

[@DIYTutorialGuy]

I like the product and have also tested the water a couple times for any contaminants. No contaminants each time, and no chlorine smell to my water. My understanding is that backwashing is aimed at helping the flow rate while the carbon removes contaminants. Here’s a reddit thread where this is discussed: www.reddit.com/r/WaterTreatment/comments/178wkvc/backwashing_vs_backwashing_carbon/

[@andrguts52]

🤣 yes that saying is very much still around I'm 20 years old gonna be 21 March 11th and I heard that saying all the time from my intro to building and maintenance/industrial and whatnot said that to my first ever class with him my freshman year it's Ingrained in my brain now I heard it so much

[@DIYTutorialGuy]

My man, it’s great hearing this saying lives on. Good luck with school and your career!

[@hdtvkeith1604]

Blue Monster Teflon tape with a coating of Oatey's Real Tuff pipe dope is a great combo.

[@DIYTutorialGuy]

💥💥💥

[@jpthsd]

You should have the RO 5 stage under your kitchen sink for your own drinking/cooking water! :) the Springwell or Aquasana, Pentair, Pelican ..etc whole house water filtration system does not provide the water clean and/or safe enough to drink! (I do not trust too much into the City/well water system yes that's sad true)!

[@DIYTutorialGuy]

Interesting. How did you come to know this information? In addition, my understanding is that a RO system is ideal for well water. However, when running RO with city water, it becomes extremely expensive.

[@jpthsd]

@@DIYTutorialGuy I have Aquasana Whole house filtration then I have RO 5 stage for my drinking, cooking (after water goes through Kangen Alkaline, the Kangen re-mineralize the water if some said RO rip of all minerals in water) No RO not that expensive, just keep changing 10' sediment water filterings every 2 months and carbon activated filter every 4 months (both are about $10) ...

[@DIYTutorialGuy]

Do you live in Flint, MI? That’s a serious filtration setup.

[@jpthsd]

@@DIYTutorialGuy I live in Southern California!

[@DIYTutorialGuy]

@@jpthsd I had no idea the water there was so bad!

[@toddludwig4589]

How do you regen ?

[@DIYTutorialGuy]

What do you mean by “regen?”

[@toddludwig4589]

@@DIYTutorialGuy never mind I figured out you replace it after 600000 gallons

[@DIYTutorialGuy]

Glad you figured it out! Have a good one!

[@SN-fl1qy]

You would think there would be no sediment after going through that huge filter 🤷‍♂️. Odd that it’s after the main filter

[@DIYTutorialGuy]

Carbon leaves a non-toxic sediment. Makes sense to have it after the main tank for that reason. Also, Springwell said it works best there, so that’s where I installed it.

[@AdrianA-pm8bv]

You and I must have completely differing directions. Mine says hook it up and put water to fill the tank through the inlet. Once full, LOCK it up and let it soak for 48hrs. THEN rinse for 3-5 min through the inlet following with 3-5 min through the outlet of each tank. You did all the rinsing before letting it soak. Hmmm. My directions are over 8 months old...

[@DIYTutorialGuy]

Thank you for pointing this out, as well as sharing the age of your manual. At the 0:17 mark I clearly explain you need to fill it and let it sit for 48 hours. 😑😑😑 🤷‍♂️🤷‍♂️🤷‍♂️

[@jerhew8]

As a plumber, My only criticism is the male brass PEX adaptors into the plastic housing, that's a no-no. Plastic into plastic, plastic into metal, but never metal into plastic. You'd think for a thousand bucks, Springwell would use brass inserts, or give you the plastic stubs(1"x3" pvc nipples) so you don't use male adaptors...

[@DIYTutorialGuy]

Why is metal into plastic a no go? Honest question.

[@jerhew8]

@@DIYTutorialGuy a little less so in this application, but in general, you can crack the plastic running a tapered metal pipe into it too far... I would say the main risk here is ruining the threads in the housing, since they will just crumble if you reefed on the fitting with a pipe wrench. At least the pex adaptor will bottom out first. If this was say...an 1 1/2" pvc drain line with a pvc to female adaptor, threaded on to an old steel pipe... begging for trouble, it'll will definitely crack over time, if not immediately. In that case, you're better off with a Fernco rubber connector between them.

[@DIYTutorialGuy]

Good to know for future jobs. Thanks!

[@jamesvalenti9288]

I hate shark bite connections. I see them leak too often. lol so if I do order one of these systems, I will be using copper pipe and soldering pipe..yeah more labor intensive, but copper is king. lol

[@DIYTutorialGuy]

Actually, cash is king 🫡

[@jerhew8]

and yet the only thing that leaks in this video are the threaded connections lol

[@Phil-D83]

Should have done a bypass and used 3/4 type a pex

[@DIYTutorialGuy]

Ok.

[@Phil-D83]

@DIYTutorialGuy good enough. Pex a uses those plastic connectors that are full flow and shrink down plastic connectors.

[@DIYTutorialGuy]

I did use pex, with the Sharkbite crimps. Was way better than copper or pvc!

[@rjcav1239]

soooo...sediment filter after...hmmm....thought before and after make the most sense.....will ask tech support

[@DIYTutorialGuy]

Go ahead and ask them, they’re super helpful! Thanks for watching!

[@Barbaris369]

Hey, I'm thinking of ordering this system. How do you like so far? Any issues afyer a year?

[@DIYTutorialGuy]

Hello! I think it’s great and have had zero issues to date.

[@theantiqueactionfigure]

Takes a big man to admit he misused a 🪛. Earned my trust, Lol!

[@DIYTutorialGuy]

Thank you! While embarrassing at times, being honest is the best way.