The Best Joy Cons For The Nintendo Switch

[@AmProbablyHim]

1:05 when he stops yapping

[@accountname-tu2om]

why is he shouting

[@traskfredrickson6045]

I have the Nyxi Wizard. Ever since release. I love it. I have played untold hours of Tears with it and that Horizon racer game. The "D" pad is too slick though.

[@bybchucky]

If you take out all the times you said ‘there’s a link down below’, this video would be 4 mins long.

[@cocoa_baby]

That's literally the point of the video 😅 would you prefer he just left you guessing which joycons he's talking about?

[@matthewburno]

KZbinr need to learn to get through the video and then say links for products into description on the end of the video so they don’t have to repeat themselves 20 times

[@RonRon0110]

​@@cocoa_babyhe can say right before he starts a link for all of these controllers will be below and that's it

[@BWTECH0521]

Another complainer boo hoo

[@bucauniverse]

lol

[@sirtito2128]

I'm still using those "Animal Crossing" ECHTPower controllers. I think NYXI also made the same design. Despite no Hall effect sensors, I haven't had any drift issues yet. Unfortunately, these Joy-Cons can't move diagonally fully. I bought this after your review, got under 25 USD.

[@rays2cents506]

I miss the echtpower joy pads, if I would've known they would be discontinued would've stocked up.

[@TheGoldenBud]

"i have every pair" "i dont have that pair here today"

[@romeras600]

Good comparison, m6 hd for me.

[@maxisenberg9093]

do any of these fit in the skull&co max carry case?

[@gusigupacifico]

I'd love PlayStation like joycons. I've been never pleased with asymmetric sticks. It seems no Chinese has invented those T_T (The one with both sticks upper side looks sooo weird)

[@zeldude9515]

except for the hori split pad, do any of these have disconnecting issues? i have the binbok ones and they recently began disconnecting all the time when playing

[@NovaIsTheBot]

I haven't had any problems with my nyxi controllers. But if u do u can always contact support after

[@robertotrevino9125]

I have 4 years with my Hori Split Pad Pro and have never returned to the old joycons: I have not faced drift, disconnection, input lag, they only need the vibration to be perfect, for the rest oh boy they are amazing. The BinBok on the other hand are pure shit, they had terrible drift at the week I bought them, never again.

[@timgressler2281]

​@robertotrevino9125 Same for me , my BinBok drift out of the box , still love my Hori Split Pad

[@bobby9458]

Are there any that feel somewhat like an Xbox one controller?

[@DripMediaGaming]

Of these I would say the closest would be the Nyxi Hyperion

[@niku_niu9965]

I really likes Mobapad Hd,it has the all the original joycon has to offer(except infra-red). How ever the price are to expensive for me.

[@joshuamatos5053]

Hey bud ! Once you get your Mobapad M6 HD's can you let us know how long it took to get them? I want a pair now!!

[@romeras600]

I ordered Jan 22 n arrived Jan 30, not too long. Best controller I've used

[@PaperBanjo64]

​@romeras600 how's the D pad on them? I'm looking for something with a good D pad and can be used in dock mode.

[@Priest015]

Mine arrived within a week from China. I'm in Canada

[@lewa3910]

The mobapad m6 has remappable buttons? Does that include stick axis inversion?

[@tobiasjansen9117]

Is the M6 HD more ergonomically comfortable than S&C grips? I have XL hands.

[@rhtr.]

I have both and for me M6 HD is better.

[@Priest015]

I have both and find the Mobapad more comfortable but it's not night and day or anything. The S&C grips are so damn good if you want to rock official joy cons.

[@tobiasjansen9117]

I have both now. Tough to tell, but it seems my pinky gets more exhausted “holding” the switch with the HDs.

[@crystalchaos462]

I left a pretty solid praise of the Mobapads up top in another comment but I just want to add that I don't think they are a perfect situation for L~XL hands. You might be better suited using a S&C or Satisfye grip and doing a Gulikit hall stick mod on your regular joycons. Where the Mobapads far short for me is that they don't hook deep into my palms and will still cause fatigue and pain over time. Also, if you have a limited edition Switch, you will miss your accompanying Joy-cons, as the case is not large enough to carry extras with you.

[@jamescross8918]

Bro you are YELLING. Look at the vein is his neck

[@johnnyquijano8243]

Mobapad M6 HD is the best

[@ActionJaxonH]

The Genki Force Field Pro magnetic flip case for Switch OLED is amazing. I wanted one for years. But now it's here, I'm using M6 HD so it won't fit. Day late and dollar short. For official joycon though (I have basstop d-pad which is way better than ExtremeRate d-pad, plus HALL Effect analogs and metal latches) its perfect though. Makes OLED near pocketable which is insane.

[@ActionJaxonH]

Unless you knew showcasing the Mobapad M6 HD would make every other joycon dated and irrelevant by comparison, thus intentionally omitted them so there could actually be a conversation and competition. Cause ya, if you showed Mobapad M6 HD, there wouldn't be much else to talk about. I know you showed M6 S and mentioned HD butnyiy gotta try HD. It's more than just HD rumble. It's Omron switches which make a HUGE difference, and battery life is longer. Oh, just heard you say you have the HD on order. Excellent! Well done. Once you get em, you'll quickly drop every other joycon.

[@sleeperdanny5268]

Chill brother

[@badmuppet6532]

@@sleeperdanny5268he really needs to get a life lol

[@TheInfiniteNine]

Tell me about it. I've seen him in other videos. If he isn't being paid by mobapad then this is sad.

[@badmuppet6532]

@@TheInfiniteNine figures

[@RealityStone02]

​@@TheInfiniteNineAnd also said in another video that he bought like 3 pairs for some reason. It's like he needs to let everyone know how much he loves the Mobapad. 😂

[@dingoos3116]

Could you do a Review about the LinYuvo-KS42?

[@tonywolchuck9707]

What is your feeling about the Mobapad 6Hd?

[@romeras600]

Best I've used

[@xiangyang3813]

best ever

[@nicolasshepherd2355]

QRD ARE STELLAR! THANKS FOR LOOKING OUT g

[@matthewburno]

You know the m6s could be perfectly fine for most people if it wasn’t that they get thrown under the bus by both the brand and reviewers! If every other switch controllers are acceptable costing more and having less features then the m6s with crappy rumble then why can’t the m6s just be the best middle ground for everyone? The HDs should have been 120$ with RGB so that it would be more obvious instead of looking like a slight upgrade.

[@JCvanSlooten]

You talked about different sticks on de m6HD. Where can I find those?

[@DripMediaGaming]

Website is linked in the description

[@JCvanSlooten]

Yes, I got the HD already. But couldn’t find any replacements for the sticks

[@PJNyte]

​@@JCvanSlootenon ebay I've seen some mobapad sticks for sale. All mobapad sticks should be compatible w each other but i could be wrong.

[@pierrealbert949]

I just received the m6hd in black, great controller but much too noisy, the buttons are very clicky. Do you have any advice on a silent equivalent?

[@bucauniverse]

what about the coiorvis phantom hd

[@jwill7998]

The Hyperion Pro Joycons are very good. However, I wish the joysticks weren't so big, flat, and smooth (a.k.a. slippery).

[@user-xy1lx8rq1n]

I use thumbcaps on them

[@Priest015]

That was one of the things that threw me about them. I'm honestly really glad I hesitated and found the Mobapad M6 HD's. Really the ONLY choice if you want proper joycon replacements. Zero sacrifices from the official joycons and ALL of the benefits of third party ones.

[@PetrichorMP4]

My nexigo gripcon stop working after 3 month... I dont play much on my switch so kinda disappointed... I dont recommend it =/

[@oswaldotorre6047]

Te mobapad the dpad do sucks because of reduced size of dpad to sensitive so, definitely not good for retro games

[@DanielLopez-wo6jp]

What about the retroflag?

[@bankai2313]

ofc you are glazing your sponsor and you dont say any downsides of them but eith the other joycons you pinpoint every bad thing about them, oh and also the joycons from your sponsor are the same thing as the hori split pad pro but its a bigger pain in the ass (i know he is paid to not say any bad things about it but still, its better to just let reviewers say what they think about them and not just pay them to glaze and glaze and glaze all over again so people get fooled by them)

[@ActionJaxonH]

Btw the M6 HD comes with a case for $6 more and it's custom fit for M6 HD, with just enough pouch room for Genki Covert Dock Mini, HDMI cable, USB-C cable for full docking anywhere, and tabletop charge stand, and middle joycon charge grip slap disassembled for a pro controller with M6 HD, and the rocker d-pad to swap out on the fly. Everything you could ever need. Also, if you have Mobapad M9 HD or Chithu pro controller, try swapping left analog of M6 with right analog of M9 HD. The larger left analog is perfect for movement as its more comfy, and smaller white analog from M6 HD on right is more grippy for camera. Then both pro controller and M6 HD have fat analog on left and grippier small analog on right

[@osukacards]

Biased if you ask me.

[@nullhare]

This is the darkest video on KZbin. Bro, get your lighting game up.

[@markbelisle9675]

How is this supposed to be objective when you are sponsored by one of the joycon manufacturers?

[@DripMediaGaming]

Did I ever say only buy this one don’t buy the others?

[@markbelisle9675]

@@DripMediaGaming No. You said “this one is great, btw they sponsored this video.” 😂

[@ActionJaxonH]

I'm sorry, any video on joycon that doesn't include Mobapad M6 HD, which absolutely smoke every pair of joycon you showcased, is incomplete.

[@badmuppet6532]

Smoke everything out there other than they don’t have a central bridge so can only be used attached to the switch and don’t have charging ports so can only really be charged on the switch lol. Plus, how many switch games supports rumble and definitely how many games support amino lol. Now that sounds like a controller that you want 🤣

[@TheInfiniteNine]

Are you being paid by mobapad or something? I see you always making the same comment on various videos like you're on a mission to let the world know.

[@Priest015]

@@badmuppet6532 Get any other mid bridge and they're compatible as far as I know because the rail system obviously has to be the same. You can detach the grip from the official nintendo one or use the Nyxi one. Charging also works as you would expect for any mid bridges that have charging.