The best outboard gauges in the world - Yamaha 6Y8(Twin LAN) gauge tutorial

[@mics9474]

What an awesome video. Explains everything I have wanted to know .😀

[@chromiumCR24]

👍👍just began as yamaha outboard technician this year

[@BrisbaneYamaha]

Congratulations Hope to see you at yamaha Grand Prix one day

[@jimyoung5733]

the steve irwin of boats

[@polie67]

I'm guessing these gauges need a controller for the motor or is it an all in one unit? I have what I believe is an older 6y5 Guage set on a 98 scout 192, but it been repowered w/ a 2012 yammy 150 that was a NOS I found a couple of years ago. She now has only about 330 hrs on it. My question is can I swap out on of my dead gauges for the one that does the trolling feature, and if so what is the part #? Ima gonna need that here in Florida!

[@johnniekazija]

Got a question: my speedometer/fuel meter just stopped working yesterday. The Tachometer works fine. But the speedometer/fuel meter went completely blank. Before that, it switched from mode to mode as the button would be stuck. Arent they waterproof? Is it only less than a year old? What could cause this? How is Yamaha's warranty on these gauges' as I see, they are not cheap.

[@BrisbaneYamaha]

Sounds like a wiring issue Yes water proof but I wouldn’t high pressure clean Yes 4 years warranty

[@johnniekazija]

@@BrisbaneYamaha actually water got inside somehow, gets on/off and jumps between modes, buttons not working (only 10 moths OLD)

[@dnzdrakrks7549]

Hey. Can you tell me the model/part number of the mechanical steering box you use for the 30hp outboards? Thank you.

[@BrisbaneYamaha]

Brisbaneyamaha.com.au there is a yamaha parts tab with every yamaha part number

[@admiltonsantos8972]

Hi i need sam assistance, my f60 is not shwoing the trim angel. I made a reset i tink my sensor is good, but the cable that cames from the sensor is not plugged to eny other cable.

[@BrisbaneYamaha]

It’s more likely the trim sensor above to left of hydraulic ram jamed

[@admiltonsantos8972]

@@BrisbaneYamaha no it is ok bu ther ois a pink cable coming from it that is not plugged. It is coverd

[@claudiupanciuc3486]

My trim indicator is up ... i just install the gauge ... how can it get to the midle of the lines ?

[@BrisbaneYamaha]

You need to go to a yamaha dealer

[@hanluke7160]

My gauge is not showing Oil level. Trying to figure out what happened.

[@BrisbaneYamaha]

That’s because they don’t show oil level There’s a low oil alarm

[@hanluke7160]

@@BrisbaneYamaha sorry I mean Fuel Level, there is showing nothing, not even single bar, full blank, just wondering if it’s program issue or sensor issue. And if it’s under yamaha warranty

[@BrisbaneYamaha]

Could be a few things 1 fuel sender Valet ration of gauge which needs to be bone from new with empty tank I’d check connections at tank

[@jjmcg9688]

How do you set the size on fuel tank?

[@BrisbaneYamaha]

Have to calibrate rate from empty

[@jjmcg9688]

@@BrisbaneYamaha I had another guy tell me to do it full. Which one is it?

[@BrisbaneYamaha]

@@jjmcg9688 file:///var/mobile/Library/SMS/Attachments/1f/15/0F369A80-8CFA-4E89-860B-E3F0B48CA13F/IMG_9986.heic file:///var/mobile/Library/SMS/Attachments/73/03/CAFCB4A9-2D74-4E1A-B2A0-CB3758688B7B/IMG_9985.heic

[@BrisbaneYamaha]

I hope these two work it’s the yamaha instructions

[@jjmcg9688]

@@BrisbaneYamaha I can’t open either of them, but thanks for trying.

[@turner111971]

Will these work with a 2011 F115TLR?

[@BrisbaneYamaha]

No

[@zackikard9648]

I want someone to talk about me like he talks about Yamaha.

[@BrisbaneYamaha]

Gee you’d meet to improve your behaviour to be at yamaha level Lol

[@Adsawtell]

How do I get the fuel read gauge on my new f130hp 2021 model

[@BrisbaneYamaha]

Your tank needs a fuel sender and then gauge plugs in Or it’s not set up properly If you purchased from me call Chris if not call the dealer you bought from

[@d10mius]

How to calibrate a new fuel level gauge?

[@BrisbaneYamaha]

We do from new when tank is empty So single point way eziest Or you have to do multi point 1/4 1/2 1/3 You can not do when unknown amount of fuel It’s all in gauge Not something most people can do If your near me bring it in if not good bless

[@JUVENTIN1988]

How can i change from galons to litre?

[@BrisbaneYamaha]

I’ve been stuck in Melbourne for month Anastasia won’t give me a boarder pass so I don’t have gauges with me but it’s real eazy Call Chris on 07 38881727 and say I sent you

[@herecomethelankfords1596]

"only gauges that you can see with polarized glasses". Removes glasses to see gauges.

[@BrisbaneYamaha]

I wear reading glasses to see close up You will be able to see screen with sunnys on I can’t see my mobile phone You too will love getting old and rooted

[@herecomethelankfords1596]

@@BrisbaneYamaha getting old is for the birds! My dad just repowered with a 250 Yamaha from a Suzuki 225. It’s getting installed in the next few weeks. Your video on gauges was super helpful for him figuring out what he wanted. Thank you!

[@aaronmay7112]

Ha great motor. Not Quieter than Suzuki

[@pstone7657]

This guy is a “legend onto himself”! I figure he has to be on at least his third Wife hahaha

[@BrisbaneYamaha]

Second Diane is awesome

[@pstone7657]

Aaron, only Wife #2 !!! I must say mate that you are quite the salesman. I doubt that many who walk into your dealership walk out without buying something. Yamaha is truly the BMW of outboards. My F40 is being delivered to my dealer in 3 days. I’ve been in financial sales for 33 years and I can appreciate your honest passion for the products you sell! And your informative video. Paul On Jun 20, 2020, at 9:16 PM, KZbin wrote: KZbin Logo 🌟 Brisbane Yamaha replied to P Stone's comment The best outboard gauges in the world - Yamaha 6Y8(Twin LAN) gauge turns Brisbane Yamaha Second Diane is awesome REPLY If you no longer wish to receive emails about comments and replies, you can unsubscribe. © 2020 KZbin, LLC 901 Cherry Ave, San Bruno, CA 94066 KZbin Twitter

[@brettgraham1254]

He's really loves yam aha

[@pstone7657]

@@brettgraham1254 The way he pronounces Yamaha is catchy. Must be that Aussie dialect. I don't pronounce my Yamaha like I used too. Now whenever I hear that name I say Yamma Haaaa just like Aaron

[@tomvancil8213]

Have you seen the Suzuki SMG4 digital gauge? Down right sexy 🔥

[@BrisbaneYamaha]

Really? Just buy yamaha and get on with your life

[@Nightlifeimages]

Bloke sounds like he could sell sand to an Arab But good motors none the less lol

[@reggieralph1234]

Donald Trump #2

[@henrikandreasson1177]

I was gonna say that, only this guy is in his right environment 👍🏽

[@2004wellcraft]

is that 90 a digital/dec motor i was under the impression only digital motors have the adjustable idle/troll speed

[@BrisbaneYamaha]

No Only 150 up are available in digital But yamaha will bring digital down to all efi models in coming years

[@Boaters_hub]

Coke hits different in ausie land

[@darrylstem6426]

All uneccasary crap