The BEST Paint To Use For a Beginner!

[@danielcaldera6075]

My first full car respray was a Mazda Artic Silver metallic. I watched a lot of videos, including Paint Society to study & take notes from the pros & the paint job came out beautiful. My personal project is an '86 Si which I'm respraying in of course in a solid red. I have sprayed some parts already and yes, solid red is an easy, fun to shoot color for beginners! I can't wait to start spraying again

[@kseries20-24only]

@Paint Society Thanks Brian for all you do including enabling me to do my first paint job on a front end. One thing I came across was running paint at the base coat. I was scrambling to fix because you make it look so easy and we don't see things like this on the channel. ;) What is the possibility of a line of videos about "fixing" common mistakes. Thanks again for all you do!

[@ianmarkey9434]

Wet sanding usually fixes things. 600 grit.

[@jaysharpe2292]

Pl

[@glenishii2022]

Another nice video. I like how you mentioned how the area that was primered wasn’t as smooth to the touch as the other areas, but didn’t make a difference in the final feel after the clear-coat was applied. Most beginners, such as myself, would have panicked and maybe sanded it down unnecessarily.

[@ralphiel5166]

The car he used was actually my first paint job when i took autobody. Milano red as i remember. One of the Best experience of my life.

[@AlastairMcDermott-c9e]

I'm a painter and decorator by trade here in the U.K and your knowledge has given me the confidence to take on the challenge of giving my van a respray in Nardo grey (with black wheels and roof) any pointers with this colour or base and clear coat as on this video 😀

[@Velly_drums]

Roof looking sharp!! Appreciate the advice, I was thinking on doing single stage but not anymore.

[@deankay4434]

Brian, just for folks that don’t paint much or perhaps first time, do a short video about what goes into paint to make something to spray and match. Of course this subject could be 3hrs, but slow it down, explain what starts with a paint code and the juices that go into the can. I mixed automotive Sherwin-Williams back in 1999 at UTI tech school to teach guys & gals how to paint. Your Red...starts with a little blue, a dab of white, touch of green, two reds and then the resins, binders & drying agents. I was service mgr at a boat dealer and little shops make two go-fast boats each year. You pull it into the sun, open 9 cans of gel coat and wipe a finger sample on the bow. Stand back and see the hues of “Nope” this one too red, little blue, some green, etc. Just a thought! It is the “Secret Sauce” episode! Of course gel coat wipes off with a rag and acetone with no damage as it is like colored thin body filler, just a different chemistry thinned with MEK and viscosity adjusted with monomer styrene. Chemistry = better living, better paint + some “UV” additives. Thinking out loud. ASE Master Tech Retired.

[@mikedmt]

I've watched a ton of your videos, I don't know if I've seen you lay so much clear in one coat😳 looks awesome

[@Georgia-Vic]

Bro this the best video I've seen anywhere in quite a while!🙄 I thought I knew about painting and I will say that as I watched this Awesome presentation I realized that I didn't know how to tie my shoe laces! lol... I look forward to more if this science! 🧐

[@russbayne4121]

Thank You Brian, you do such a great job at explaining and demonstrating what to look for when a guy lays down the paint. 😀👍

[@TheTradesmanLU2001]

As a handy fella I rarely pay another man to do anything as I’m probably a tad overconfident in my ability to do whatever is needed As a career building trades guy I also know very well the difference between doing something and being an absolute pro and what it takes to be at the expert level . . I’m a pro when it comes to commercial glazing applications and my skills do transfer when it comes to working on my house, remodeling etc . What I have learned when it comes to painting a vehicle however is that it’s a skill that absolutely requires a lot of practice to produce a result that I’m happy with . Needless to say I’ve reworked the entire driver side of my truck 3 times and I’m still not fully satisfied. I’ve spent far more trying to do this myself than had I just taking it to the shop. All the prep materials, first bondo then a different bonds then I finally bought the lightweight ever coat which is far easier to work . I’ve gone thru 3 quarts of Toyota 1g3 , first SW, then I tried Lesonal and finally matrix edge which was the best match without a doubt . I tried Wanda clear which I was virtually unable to lay flat. Finally I went with Greentec and I was finally super pleased with the result. Until I had an unfortunate situation occur that landed a bunch of debris in the rear quarter panel section.. ugh. This is tough . I feel like it’s easy to try and rush to spray but that’s a huge mistake. It’s so important to do the proper prep . I have the utmost respect for your skill and knowledge in what you do. I have been thoroughly humbled but i won’t tap out until I’m fully satisfied, I don’t care how many hours it takes . I definitely learned a lot watching you work .

[@PaintSociety]

Thanks so much for your kind words!

[@livedeliciously]

I'd love to see you do a series where you do a Concours paint job from start to finish.

[@alexchun2171]

Thanks man for sharing this video because I am a beginner and I have been watching all your video's 👍🔥🔥🇧🇿 I am form Belize

[@Gegsite]

Smashing that clear hard! Wow. Probably will run if you not paint a horizontal panel as Brian did a roof. Good job!

[@PaintSociety]

This clear can take it!!

[@guyguyguy6942]

Thanks for all the helpful videos. I'm about to lay down some paint (well epoxy primer) in two days for the first time. Your have the most helpful paint videos on youtube.

[@richs8404]

Once again, thank you for the great content. Do you have any previous videos which cover these topics: 1) How much paint to purchase and/or mix vs. size of project, and 2)What to do if your paint cup runs empty while spraying? If not, this may be helpful information, as well. Thanks again!

[@sly2196]

Most paint comes with instructions on how to mix depending where you get it mixed. If you take it to a Auto paint shop they should help you. I live in the UK and my only issue is the price difference between a Spray Can and a Spray gun is a big difference e.g 500ml spray can costs £8 ($11) compare that 500ml of tinned paint is £20 ($27) i can buy 3 cans of paint for the price of 1 tin of paint this does not include Thinners, Activators etc. Primer and Clear are cheaper in tins. The cost of 2 500ml Cans is slightly more expensive then tinned

[@richs8404]

@@sly2196 I'm interested in "how much" paint to mix at one time and "how much" paint to purchase for a certain project (aka coverage). Yes, I've seen the mixing instructions on the cans and even found good mixing information on product websites. Thanks.

[@simonb1635]

@@sly2196 A 500ml spray can only contains about 100ml of actual paint, the rest is thinners/propellant

[@justinshields4216]

Crazy how u can see the primer & fillers under 3 coats of red.. had me nervous 😓 😟 😰.. clear coat just laid out like glass it all went away like that 😅 😳 😬. Awesome brother!

[@pcorf]

Base and 2K clear is always the way to go.

[@feedbrain6257]

Hi Brian, I learned lot from your videos. You explain very well painting stuffs.

[@NebukedNezzer]

I have painted 5 vehicles with rustoleum. works great.

[@samuelvanosdell314]

What air compressor do you use. I’ve looked I haven’t found any videos where you talk about air compressors.

[@Mechaniclyfe]

Awesome work Brian! About to spray a roof as well , same color too ! :) thanks for sharing

[@PaintSociety]

I’m watching !!!

[@Mechaniclyfe]

@@PaintSociety ❤️ thanks Brian, that Milano red sure looks beautiful in the light almost has like a pink tint to it at times

[@bradleywise835]

This guy has more paintguns than i have screw drivers

[@ryanxiong2258]

YES an eg hatchback, what I want to see more!

[@PaintSociety]

Subscribe to Ahc garage and you’ll see more on this project.

[@ceesklumper]

I'm a beginner and just about ready to spray my second car with ... single stage! (NOW he tells us, haha). Thanks for another great video Brian, very good tips.

[@brightacheampong8478]

That's great

[@philtucker1224]

Thanks again Brian, great advice as usual and you’re really helping my confidence. Live long and prosper buddy 🖖

[@PaintSociety]

Thank you !

[@OneKauz]

Beautiful hatch 😍😘🦋

[@BruceLyeg]

Like looking across a still lake. Nice job. I'm not a Honda fanboy, but I've always liked that red.

[@jcx5659]

What about single stage paint? Not everyone wants a clear coat. Maybe you could do a video on that. Did appreciate the comment at the end about single stage being more difficult for beginners........

[@Cultofpersonality09129]

Single stage is made with clear coat.

[@jcx5659]

@@Cultofpersonality09129 Do you mean it has stuff that makes it shine in it?

[@zaylanrevz4603]

@@jcx5659 single stage paint is base & clear mixed together…

[@jcx5659]

@@zaylanrevz4603 Not really. But you can spray clear over a single stage paint.

[@paullasseigne]

I’m a beginner just thinking about single stage for a daily driver just to look nice any suggestions appreciated tia

[@randyheber5238]

I’m really glad you make these videos as I have model building and airbrush experience just no auto body or paint experience. I decided to help my daughter with a dent on her 21 Hyundai ELANTRA and yes made a number of mistakes! Now with your videos I will be able to fix them and look like a pro did it thank you so much.

[@islandboi1988]

❤️ the Eg Hatch!

[@hamedh7256]

Hi Brian. Thanks for all your efforts into this very helpful channel. You use sealer in many of your videos. I am struggling to find them in the UK. I have got different answers about it. These are the keywords I have found “basecoat binder”, “isolator”, “ wet-on-wet Primer (normally 2k epoxy)”. Would you let me know which one the correct?

[@darrenalcantarazz8087]

Thank you for the tips.. All the way from Malaysia....Keep on sharing. Peace yo..

[@danconley523]

Hi Brian, Do you always use 70% overlap and do conditions change that? Agree with previous comment about trying single stage paint. Always great info. Dan

[@PaintSociety]

I try and keep it around 75% overlap

[@kenc4104]

They do a lot of "going ahead" and quite a bit of "went ahead" on paint society!

[@deputydan2226]

What's up brother love your videos and been following a lot lately. Have a question though 🤔 I wanted to clear coat over primer but not sure if I should lay epoxy, body work then high build. Or epoxy, body work, high build and epoxy again?

[@darrylway4910]

Love your lessons,helps me heaps. Cheers👍👍

[@mariopaintclass6091]

Great video didn't even realized you paint that roof already

[@PaintSociety]

Stay late last night and early this morning lol!!!

[@howardiko7156]

Do you want to sand between paint and clear?

[@carlwaddell8418]

Excellent info and presentation

[@SLYDIT]

I sprayed single stage red as my first ever car paint. It turned out great (a few issues that only I notice) thanks to your channel! 👍👍

[@dalejrfan820002000]

What kind of paint do you recommend for a classic car?

[@TheFlanman10]

Don’t you NOT want to apply body filler to a metal surface since it is permeable? You would want to epoxy, body filler, prime, then base then spray?

[@tinker-time]

Boom grate job Brian 👏 👍

[@fluorescentmug8333]

how do you recommend sanding off old peeling clear coat with decent paint still on the car?

[@certified1964]

Hi this is my first time writing in the comment section. I have been watching most of your videos and find them excellent, especially because I am not a body repair person. You make it look simple. I have a question. I purchased a 1978 Eldorado that had a new paint job about 5 years ago. The paint was great and the car was sharp. I had to use my garage so I pulled the Cadillac out and covered it with a tarp under a tree for about 3 days. The weather was about 85 degrees and it rained. When I pulled the cover from the vehicle I noticed that the clearcoat on the hood and the trunk area had huge blisters on it like the clearcoat separated from the paint. What do you think happened and how can I repair this without taking it to a body shop. The paint was not affected, just the clearcoat bubbled and now is flaking off. Thanks for any help I can get from you.

[@cecilb3216]

Question? I'm thinking about painting my car in my garage. My hot water heater is there. Should I be concerned?

[@itsthehumidityyall8303]

I believe paint fumes could explode if they build up. I’m not sure I’d be game for that. Anyone else got thoughts?

[@rubenm1927]

Was wondering did you have to wet sand "orange peel" after the clear coat cured? If not any tips on how you clear coat a car without needing to wet sand it.

[@martinlandaverde403]

Is the first one you refereeing to single stage??

[@lightningshifterstudio]

I could really use some help! I'm restoring a truck, and just want that factory finish, but don't have a ton of money to spend, plus no paint booth. But is there a good way to get a nice finish that close to factory for someone who has never painted before? I've watched almost every video and it looks like there are so many variables, that I'm almost terrified to spend the money on equipment and completely ruin my truck and making it look like I had painted it with rattle cans. What is the best advice for someone like me? I'm really worried it will look dull and orange peel. I planned on using the Astro EUROHE107 EuroPro High Efficiency for Sealer, Base and clear. This a good choice?

[@jimfeaster4837]

Try painting essentials Single stage try new 3m gun both are more economical ive had Great luck

[@dlucas527]

Where do you get your paint color and where do you get your tape and plastic?

[@johnjohn4465]

Damn !!!!! Looks like glass !!!!!! 5 Stars !!!! John

[@davidruiz4126]

Do a single stage Paint job tutorial!

[@TheLombardProject]

It looks like you sprayed first coat and second coat back to back with no cure time. Is that correct? Great content. I always enjoy your vids. Makes me think I could do this on my own vehicle as well. Cheers Howard

[@speedbird7976]

I’m in Las Vegas where do I buy paint? I did the rattle can paint and I was amazed but ready to buy a machine and gun for this

[@ernestking1959]

Hey I really like your videos, and they' ve helped a lot with painting again. Even tho you work in a big bodyshop, your channelis right for do it yourselfers. I need to know about spraying clear over acrylic enamel.

[@robjackson9671]

What type of paint? I started painting when I was 16 with enamel and it would take over 24 hours to dry. Then we switched to acrylic enamel. I have not painted in 20 years. What is the best type now.

[@born2wrench]

What was the gun pressure on the clear??

[@slackerzsincity6947]

I want 1 of those hte walcom guns

[@alanluber8842]

Nice video. Good info ❤

[@longshot5738]

This is a great video for a beginner with very good advice too. I am a beginner and am wondering what was your air pressure when you payed on the clear coat? Thanks

[@ianmarkey9434]

I'm definitely a beginner. I had to go down to bare metal because my roof was rusty. Was down to 40 grit paper and not sure how to get those scratches out. I tried using filler primer some still there. Do I have to sand that filler primer off and the bare metal with finer paper?

[@Its_about_that_time]

What if you only have 1 spray gun. Is there time to clean it between base and clear

[@nigelhosein7822]

Hey nice video learn ah lot from the videos you guys posted in the background is that sikken paint you used .I did a few vehicle and always use that type of paint and clear comes out really well

[@livingwithfreddyfresh7011]

Man do you want to paint my Chevelle!?

[@snapfly7]

Do you not need to add a primer sealer over the sanded old clear before adding the base coat?

[@DrivenFilmsPhotography]

Nothing beats a clean 90s honda:)

[@FIGHT101TV]

i got dents on my car an im sanding down to the metal...so i have to spray epoxy on those spots correct? this my first time painting a vechicle

[@dlucas527]

What nozzles do you use for paint vs clear coat? Do you do 2 coats of each?

[@andynmaas]

Hi I like your channel it very helpful. I plan to paint my son honda civic hood fender and bumper. So I check what compressor required and it around 13 CFM and that one only on compressor above $900. Is anyway DIY can save money because maybe only use that compressor one time so we can use compressor around $250?

[@agustinferreira2073]

Hi, love your videos, great quality and great instruction, thanks. Very helpful as I prepare to DIY fix clear coat fading and some other paint needs for my car. Also located in Soflo, let me know if you have any recommendations for paint booths to rent (Live in an apartment building so no garage).

[@hpd633]

It's all about the BASE the Base the base

[@ricardomolina787]

Hi Brian this is me again i have a fibra glass hood .need to be panted i never see you working on fiber glass it’s black brand new my cuestión is do i have to put prime or yes the paint

[@briansmith6862]

The first American I heard who pronounces "roof" correctly!!!

[@cornrpost9088]

hey Brian. what kind of clear would you suggest painting over bare rust metal to preserve the patina

[@silivasfourteen]

Love the content Brian, something to learn in every video. Thank you. Isn't better to use 1k or 2k for painting an interior and engine bay? I want to put metal flake over it too but not sure as its my first paint job.

[@PaintSociety]

2k all the way is the best

[@silivasfourteen]

@@PaintSociety thanks man, much appericated.

[@loganpadilla8320]

Damn I'm having to use a step ladder just to do roofs on small cars like these lmao

[@PaintSociety]

Thai car is small that’s why lol

[@pedrocastillo5589]

Hi Brian, how spray my sealer nice and smoon

[@Honda90996]

I know this is unrelated but I 100% trust your opinion over anyone. Do you have recommendations on a good undercoating?

[@anthonygreene4244]

I got a huge question so after spraying clear and realized that there some spots that need redone but id rather just put another layer on the whole thjng do i have to skuff the whole car or can injust wash and respray

[@kengranger8006]

hi brain thanks for the great videos im planning on painting my car a shade of yellow whats the base colour bae coat i need thanks ken

[@howardiko7156]

What is water base paints?. Can't find a shop that doesn't use it.

[@tonyproctor7143]

Great information Brian, is it ok to use a medium hardener for HS clear at home temperature around 70/75 degrees???

[@mikelmorgan6409]

That DeWalt sander is legit.

[@PaintSociety]

100%

[@zeeb696]

You said you would tell us what kind of paint. I missed something. Lacquer, urethane enamel, hardener, ???

[@sasquachbigfoot9070]

Well hell painting a my 50 year old truck is going to be a piece of cake, all I needed is everything a professional paint shop has, ten's of thousands of dollars. For all you beginners out there like me save up about a hundred grand then you'll have everything you need to paint a car.

[@rsonweb2060]

I don't have any facilities either. I painted my wife's 92 Chevy pickup in my shop with a gravel floor. I wet everything down and hung plastic. It worked pretty good. I was repairing the peeling paint and rust. It was gave the old truck new life.

[@lovegod8519]

Is u500 single stage good for a beginner? Also it comes with a u500 hardener. Do I need to buy a clear coat to add after?

[@jayrock5615]

I got a question I live in Saint Cloud florida and been watching your videos for awhile and just realized your also in Florida but you mentioned your in South FL. How far from Saint Cloud? I would like for you to give me a quote on touching up my Dodge Charger.

[@PaintSociety]

You’ll have to come to our shop. Acura of Pembroke Pines

[@jayrock5615]

@@PaintSociety thanks for the quick response. I'll google how far that is...

[@brettmorvant4288]

Hey if im spraying a two tone paint job what would the process be ?

[@keithx8734]

I have a question, i spray my construction equipment (trucks excavator etc) i know that it wont last long but i still try my best to make them look good. My question is when i spray a panel and go to tie it up, the bolt head damages the paint around the hole if you know what i mean. I only spray red oxide, then grey undercoat and then the colour. 2-3 coats each time. What am i doing wrong?

[@PaintSociety]

Make sure it’s prepped good under and the paint is completely dry before tighten

[@Harlo86]

Hey I bought a ws400 5905 Evo 1.3 as my dedicated clear gun and I'm a beginner. Was that a mistake? Should I get a lph400 ,w400 or bellaria? Which gun would lay the best flat finishes? As I'm not planning on doing much factory repairs vs show quality. Dont like to buff either. I've used the ws400 but not enough to get it down and my finishes weren't perfect.

[@walterwalters3069]

35 psi 2.5 fan and full open trigger. You should be ok! You have the best clear gun!!!!

[@Harlo86]

@@walterwalters3069 thanks!

[@PaintSociety]

Ws400 all the way

[@Harlo86]

@@PaintSociety thanks

[@husky1232]

Great finish brian going back to metallic is it best to finish of with 800 grit before spraying matalic? Rather that 600

[@PaintSociety]

800 correct

[@heinzmuller6858]

Du bist der beste 👌💪 wenn ich nicht 13000km weit weg wohnen würde dann würde ich gerne bei dir 2 oder 3 monate lernen. Echt klasse wie du alles erklärst 💪💪💪💪👍

[@noelwade]

Thanks for all the content and tips! For my first paintjob I'm using (a) Yellow, (b) a Metallic-flake yellow, (c) a high-solids waterborne paint, and (d) its on an airplane [so single-stage/no clearcoat to avoid adding too much thickness & weight]... Is there anything I've missed, that could make it MORE challenging??? :-D

[@noelwade]

Watching your videos over the last year has helped me lay down the epoxy primer OK on all the components... I'm just finishing sanding everything out and I'll be spraying the color on next week... Wish me luck!

[@PaintSociety]

Good luck! You’ll be fine. You have everything you need to get the job done.

[@gennadiybogdanets8490]

What clear are you using on this also, do you move a lot slower with a 1.2?

[@jeffreywong5112]

It's weird. I keep on watching your videos.

[@Pro.1322]

Thanks for another great video. What’s your advice on painting cars with Rustoleum paint from Home Depot? Is it worth it? IYO. I live in Arizona where the temperature can get up to 120deg in the summer. Current white paint is fading away. I am prepping to repaint it, no major body work no rust, except some rock chips. Plz let me know. Thanks 😊

[@bs9087]

Update?

[@arnoldomora7490]

Me gusta como se mira pintando

[@jeffreyb8770]

Short, one-second bursts of base work for me.

[@socalpaints9718]

How come you spray with such low pressure . ? Usually when it’s under 15 or 20 I see bigger droplets so I usually spray 20 psi and clear is above 30 psi

[@fundamentallybroken4194]

All depends on the gun, I have 3 guns. My primer gun (Chinese no name junk) won't atomize under 45psi. My base gun is an old Sata 26-30psi, and my clear gun 1.2 tip wants no more than 18-20psi.