The BEST pedal tactile I've used! | SIMAGIC P-HPR Haptic Pedal Reactors | TEARDOWN and REVIEW!

[@SimRacingCorner]

*Thanks for watching! Other related videos you may enjoy!* 🤑 s.click.aliexpress.com/e/_Dd4xggX ▶ SIMAGIC P-HPR | Haptic Pedal Reactors [UNBOXING] kzbin.info/www/bejne/jZCtf6mKoKqAgas ▶ SIMAGIC Haptic Reactor | Simsonn Pro Pedals installation! [GUIDE] kzbin.info/www/bejne/anPJomaljqmth9k ▶ 3D Printed brackets www.thingiverse.com/thing:6641868 ▶ SIMSONN Pro Pedals [REVIEW] kzbin.info/www/bejne/kIG4p4mHlNakZsk ▶ 🔉Mini BASS SHAKER🔉 DIY Pedal MOD [GUIDE] kzbin.info/www/bejne/d3_HfZ2KfZKYbs0 ▶ 3DRAP FEELING UPGRADE KIT [REVIEW] kzbin.info/www/bejne/gl6Qg2Wvlsh_Zs0

[@mkatakm]

Thanks for the best guide for this device on the entire net.

[@CrashD6]

Unironically the best ASMR video I've seen (well, I don't even watch those, but still) the sound of the elastomers, the motors and the shifts sounds like an industrial machine or something, quite pleasing to hear I think

[@catnipherb]

Your microphone is really good and sensitive. Pick up detail when the haptics are at their lowest output. And thanks for showing there's no delay (or at least me and you can't notice) in them when you locked the brakes on purpose.

[@MrSantiago485]

Haptic pedals are a game changer, I highly recommend them. I'm using dayton audio pucks zip tied to my pedals it's nice to see other option out there.

[@vaibuscala6441]

I've been using daytons as well, on a 4 channel config Front LR and Rear LR. I'm thinking about getting these for the pedals and maybe a couple more daytons for under the seat. That way I would have an 8 ch configuration and hopefully I can distribute the effects bettrer as I have not yet found the right effects setup

[@stevenlarson3316]

I'm planning on doing the same. Are zip ties a good way to mount them? I'm looking for ways to do it. I don't want them shaking loose.

[@om_is_hobby]

Great content as always! I really like your tear down/ disassemble series. With this, we can see how the reactor works. Actually I build my own DIY reactor, and this video really help to make it better in next build. thank you for the video!

[@SimRacingCorner]

Thank you very much!

[@reiisbrunoo]

I watched your video and I liked what you did, I'm about to make a shaker like yours! I just want to make the full coil. If you go make an improved system like the simagic one, record this for us!

[@om_is_hobby]

@@reiisbrunoo thank you, need experiment with a magnet and the other stuff. The housing etc. It's gonna be a lot of work. 🤣

[@reiisbrunoo]

@@om_is_hobby Yes, a lot of work but in the end it's satisfying to see everything working 😌 I believe in your potential Bro!

[@johnjones276]

I ended up grabbing same Pedals after watching your review. And probably buying this kit to.😊 good videos

[@gabetjh]

will you be able to post a video on what effects setting you have enabled for each pedals?

[@Gizfreek]

Got two little 20W transducers doing the same job myself, 3D printed adapters to mount on my CSL pedals and they work great, can only recommend adding something like that to every rig, especially when paired with SimHub. Only downside is the mounting but when you are into sim racing a 3D printer is almost a must have, especially when they've got so affordable in recent yerars.

[@biaaskodarallyteam2016]

Did you used those simagic haptic too?

[@harrysmith1986]

Will you be reviewing the new cheapo ones neos?? If so look forward to it

[@mkatakm]

Reactor eh ?! Wow !! Very nice as long as there's no leak.

[@clockterra]

Good video, but i disagree on one thing when you compare the sound exciters: (i tried all them mounted on heusinkveld pro pedals using simhub). For me the sound exciters are better option than the simagic haptics and not only in price, in performance too.(some pro and cons). Simagic haptics: 1- lock the pedal on selected Hz, all efects on that pedal are the same, you can not change Hz on effects for that pedal. 2- It are powerfull feel more vibrating on low Hz than the sound exciters (25 W) 3- power suply is 52 v 2 A. (all people using an amp are doing it wrong, as them needs voltage to work properly and an amp only give 24 v normally it does not matter the W of the amp (you can use a 100W or 200W amp and it still doest not vibrate as good as do it with the simagic pcb and powersuply). Sound exciters: 1- You can select every Hz for every diferent effect on the pedal that you wanna ( for example i have 30 Hz on ABS and 60 Hz on wheel lock on,gear shift 45 Hz on the same pedal that give a lot information and can feel the diferent Hz (diferent type of vibrating) while playing. 2- If you choose a (sound sciter aiyima 40W you can choose a 50mm or 65mm i have 50mm) for the brake pedal, it outperform in all ways the simagic haptics, the 40W are a lot more powerfull and vibrates more than the simagic even in low Hz...and do it with a 24v 50 W amps. And if needed sound sciters are in 50w 80w or 100w for still more stronger feedback but really it is not needed..and them makes a lot less noise than the simagic. 3-The price now for a 40w is only 18-20 €, for that price all people searching for sound exciters have to choose them over the 25w that are 16€ the change is so noticiable and its only 2 or 3 € diference..(and the diference is being under the simagic or being on top of the simagic).

[@driflysh4597]

Thank you for the detailled comparison!

[@pamo5900]

Sometimes its just better to pay a bit more then mess with diy :D I got 4 of them for brakes (4rigs) and love them. Connected on a cheap d-class amp.

[@pinkoball4165]

you should use the simagic box instead of the amp...

[@JoseFcoBN]

@@pinkoball4165 If you knew about electricity, you would know that they do the same function, buy the cheapest ones and that's it...

[@pamo5900]

@@pinkoball4165 why? works the same

[@GregoryShtevensh]

​@@pinkoball4165makes no difference

[@keifypeat9494]

I bought 3 and mounted the 3rd (Clutch) reactor under my pedal plate for effects like road rumble with Simhub

[@Space-O-2001]

Great angle, I wonder how the compare to the Slip Angle minis? I'm thinking about getting their 6 pack but this might be a cheaper alternative

[@daifuco]

It's a lot of work but if you have it around consider installing them on the T-LCM

[@chuminator0277]

On SIM hub you can't choose which frequency you want on each effect

[@afroinline]

SimRacingCorner did you find a way to connect pedal directly to Simagic hub ? That will be really good if it was possible.

[@hengmesa]

Which one is good Rumble Motor, bass shaker or sound exciter?

[@rologti]

Instead of the simagic controller, can I use an arduino? That will connect straight foward tl sinhub also

[@thierryracing2290]

Salut Merci pour cette vidéo Une question Je joue sur lmu et les voitures n’ont pas d’ABS Est-ce que ces moteurs haptics vont transmettre des vibrations en cas de blocage des roues lors du freinage ? Mode ta réponse Thierry

[@GregoryShtevensh]

Correct me if im wrong here. But theres no reason I couldn't replace a single Exciter (lets say the brake) with one if these, and leave the exciter on the throttle? It looks like these would run off if any amp

[@Honir4]

can you make a video on how to riassembly the generic usb sequential shifter from ali?

[@LoserTry]

But p1000 are better pedals than simjack or similar no?

[@Jnibbs24]

Is it worth even getting one for the throttle?

[@Jnibbs24]

How are these compared to the tt25 Dayton audio pucks. I have them on my pedals now but if they aren’t much different then I don’t feel like upgrading

[@BMDubsE93]

These are much better and worth it.

[@Jnibbs24]

@@BMDubsE93 do you have experience with TT25 or you just assuming?

[@magicpierrick3213]

@@Jnibbs24 haptic is better

[@LoserTry]

What do you think about new haptic from simagic cost 16$

[@SimRacingCorner]

Those are rumble motors, so not as good as these.