The Best Reloading Press - Forster Co-Ax Review

[@BoltActionReloading]

Find the Best Reloading Press for you: kzbin.info/www/bejne/rnm4oHt7dq-badE

[@SimpleLife1971]

My press arrived early and was subsequently unboxed, cleaned, and mounted to a mounting plate where it overlooks its kingdom...The fit and finish of this press is impressive to say its operation is as smooth as glass is an understatement!

[@donmarshall4888]

I agree about seating primers on the press. I looked at these for quite a while a few years ago but none were available. I bought a MEC Marksman’s and it performs extremely well and no issue’s for a micrometer. Not taking anything away from Forster at all, just there is a reasonable alternative. For what the Forster costs, I outfitted all my dies with the LockNLoad system for my MEC and still spent less money. Serves the same purpose, no adjusting the dies once they’re dialed in.

[@bigald9560]

Love this press! Been using it since I started. I've probably ran into most of the possible issues, but they are easy to solve and get past. I never have to worry about things with this press, it is just so strong and reliable.

[@PC-uh6hk]

I've owned RCBS RockChucker and Hornady Turret press and both of those are in storage but the RockChucker was a pretty good press. I use the Forster press now and I like it a lot. I handload for 7mm08, 28 Nosler, 257 Robert's, 308 Winchester and 223/5.56.

[@aaron9696]

After your review and Erik cortina’s i just ordered mine, may 6th delivery date. I’m looking forward to not screwing dies in all the time, and not losing anymore shell holders under my bench

[@therangersbulldogs6350]

Great press, I had one (Bonanza) some years ago, works very well. I had also 2 RCBS Rock Chucker, a Lee Classic Cast(slightly better than the RCBS) , I still have one of each, works well also. In my opinion the Turban Prazipress is the best single stage press for precision rifle cartridges, I got my first 4 years ago, these press are incredibly well made and accurate, very high quality press.

[@SimpleLife1971]

I've been drooling over this press for years! Your review scores a bullseye in my mind will be under the tree for Christmas.....along with a Labradar chronograph along with all the fixins!

[@paulnelson9907]

Probably one of the best reviews of a reloading press on the tube, I have used it a long time and rate it right up there with my RCBS Summit.

[@BoltActionReloading]

Thanks Paul. I tried to be fair. It's everything I want in a single stage press, but it's not for everyone I guess.

[@rudolphferdinand3634]

I've been reloading for 30+ years, but I went looking for an upgrade from my old Lee's precision press. The Ultimate reloader did a 13 reloading press showdown. The best of the group was the RCBS Summit reloading press. I also knew that every time that you remove the die, something going to change that setting. Well, Hornady's Lock-N-Load Die Bushing 3-pack set has given me what I wanted. KISS! RCBS Summit Press.

[@rmbettac]

High quality content, as always!

[@BoltActionReloading]

Glad you think so!

[@Gunners_Mate_Guns]

Damn good review. You were straight and to the point. I've been a Rockchucker from the beginning, but the Coax is really tempting me.

[@cornbreadburgess1950]

Thanks for the update brother, great info,see you on the next one.

[@ObsidiansArms]

I almost bought a Co-Ax until I saw Ultimate Reloader's Single Stage Press comparison video. I ultimately went with the RCBS Rebel Press due to the results he was receiving with it versus other presses. Swapping out dies is still easy since it will accept Hornady's quick change system. All that said, I still kinda want a Co-Ax! Maybe I'm just a weirdo that way.

[@bannedbycommieyoutube5time920]

Great, well thought out review. Very cool that the press is so repeatable with its quick change system - thanks!

[@BoltActionReloading]

Thanks for watching!

[@jaymiller393]

Ordered mine yesterday!

[@BoltActionReloading]

I hope you like it half as much as I do!

[@carbonunit57]

Great review. I just bought one today and will have it in a week.

[@BoltActionReloading]

Hope you enjoy it!

[@carbonunit57]

It will be my go to press for 90% of my reloading. My Dillon 650 will reload 9mm plinking ammo. I came close to buying a Rock Chucker and using Lock and Load bushings but once I say the Co-Ax, there was no other single stage or turret press that would interest me. Great review!

[@lightningrider2508]

The co-ax is as close to perfect as one can get in a press. Thanks for the review.

[@BoltActionReloading]

I love this press and only bought it on a fluke. It was a cabelas bargain cave return. Can't imagine the why you would take it back but it was all there and works great!

[@davidandre886]

For the money yea, but the zero is better for sure.

[@texpatriot8462]

Very fair review. I liked mine (particularly the depriming system) but I replaced it with an RCBS Rebel. I just didn’t like the long arm travel. One thing I would add - users probably don’t get out of buying shell holders due to the need to use them for off press operations like priming.

[@BoltActionReloading]

Glad you think so. I tried very hard not to sound ridiculous. For priming I would go the rcbs universal or the FA which comes with them. Not saying I don't have shell holders but it is possible to avoid them. Just not a given.

[@texpatriot8462]

@@BoltActionReloading your videos are fantastic. I have learned a lot.

[@tiputipu777]

You dont have to adjust your dies every time with a normal press either. Mine are set so that the lock ring is very tight on the die, and just turn your die hand tight on the press. Works very well. The co ax was high on my list, ended up going with the rcbs rock chucker kit for availability, cost and gavin gave it a very good rating in his shoot out video. Also the set came with pretty much everything I needed.

[@eddielombera5862]

Foster co ax is more easier to work, more accurate, and better much better to switch out dies. I own both, the rockchucker is excellent for new reloaders and prob the best bang for your buck single stage press but the co ax is on another level.

[@magic4221]

As im sure you know, the Frankford Arsenal M press is in many respects basically the same press. Ive had mine for about a year and my M press turns out very consistent ammo. The Forester system for holding dies is a bit better than using M press blocks with the set screw but by buying a few extra blocks that problem is solved. All other pluses on the Forester are the same on the M press..... and it's readily available.

[@ef2967]

Just ordered mine with the inline fab base and tray holder. Cant wait. Was on sale

[@JerrBearTactical]

Great video Sir 👍

[@BoltActionReloading]

Thanks 👍

[@takatir]

My favourite press, for 9mm to 375H. Effortless, reliable. No need for a shell holder. Precise. Changing tools is a real pleasure. Good for lefty ! I prefere hand primer for the feeling. But very very difficult to find components, especially outside the US.

[@yukon4545]

My Bonanza has been a great addition for decades. When I got some Alpha brass for a 6 Creedmoor, they have 'match' primer pockets. Too snug for hand priming. I finally used the tool, and set up the priming station. Worked slick. Maybe a short video on how that's set up would be valuable...?

[@HPAcustomriflesandcerakote]

Really, which hand primer do you generally use for priming that you had issues? I've had issues before too with Peterson brass

[@R1Kyle]

On the list of cheap presses presses that load better Ammo are two stand outs. The RCBS Rock Chucker and Rebel are two of them, there is even the Summit for about the same money. Now if you want to spend a bunch more $$$ you can get even better yet.

[@lemonaid1605]

Great review, thanks! How about a accuracy shootout between ammo loaded on the Forster Co-AX and ammo loaded on the Dillon?

[@BoltActionReloading]

At some point I will, but realize that it just invites comments from folks that own the one that didn't perform as well that I don't know what I am talking about or didn't do something correctly. They are really very different markets IMO. Can the 750 compete with the co-ax without any modification? Is the true question to answer maybe? Can the 750 compete after a lot of modifications? I am not a fan of buy this, modify these 10 things and it will work.

[@northernsky6117]

I dont think there is really any difference in the target if you set the 750 same way F-class John did. I have done the same for my 750 now with Armanov parts. I have T7 also and as far as seating and sizing its looking good. Must go to the range to verify results.

[@David-uk3nv]

Really like mine for the same features you described in the video. However I have one more critique to add and a buyers beware: Some dies are NOT AT ALL compatible at with the Forster Co-Ax! For example: I can't use my DAA .38/.357 crimp/seating die for reloading .357 magnum on the Co-Ax because even if the die is just ever so slightly threaded into the lock ring it still sits too low in the press and crushes the cases (don't know if it works with .38spl). Other dies are just barely compatible like my Dillon crimp die for .44 magnum where only about half the threads of the lock ring are engaged with the die because otherwise it too would sit too low in the press.

[@msa4548]

The two single stage presses I like the most are the Forster co-ax and the Redding ultra mag. The biggest downside to the Forster I see is that it's always sold out.

[@kilokiloj]

That was a great and thourough review. Thanks.

[@Cory14Tina02]

3:15 Just like the old TV commercial jingle said, "I got it on eBay". I wasn't too enthusiastic about having to make my purchase on eBay, as I have been burned a time or 2, but I found a seller who had a high positive seller review history.

[@vincef5832]

I was set on a Forster for my upgrade. But Nexus is interesting. I’m going to see if the KZbin experts like Gavin and Cortina start using it. When you see the experts using them you know it’s a good decision in an effort to buy quality , low tolerance tools.

[@lynncollins1484]

You have not mentioned the best part of this press. The die body slides in-and-out, while the shell holder moves the case right-and-left. Your case and die are always perfectly aligned by these two "floats." I started wit a Rock Chucker Junior about 1963. I moved up to a Rock Chucker in about 1971. I got my Forester Co-ax about 1976. It is still the best thing I see for rifle reloading single stage.

[@dalefine3329]

Love this press! I ordered and waited for approximately 4 or 5 months and have had them for maybe 4 years. Boy! I can't live without this press! Worth waiting!

[@garyh.7282]

I lucked out found one on Ebay for only $225.00 with free shipping. It's a Bonanza but looks like new and functions perfectly. My only problem is setting the full length dies I never feel confident bottoming out the die on the shell holder other wise I love the press.

[@1340MB]

Great video, good information. Eventually I'd like to get one. As a side comment, have you done a video on your Dillon press?

[@BoltActionReloading]

I did do a video on the 750 and it got put behind and age restriction.

[@gscotty311]

I have two on the way!!

[@doctormdds]

I love my Forster Co-Ax press. It shows to be in stock at Brownells this morning.

[@1202burton]

I check every day for last 8 months haven't seen one in stock except ebay , and about $100 higher than everyone else..backorders are around 13-16 months..

[@BoltActionReloading]

In stock at midway right now 389

[@1202burton]

@@BoltActionReloading Thx so much, was about wore out searching all the time glad i waited. I have plenty of brass primers and bullets for 6.5cm what are my options for powder?

[@DanielBoone337]

This came in a close 2nd when I was just looking for a new single stage but I reload for multiple rifles chambered in the same cartridge so adjusting dies all the time is something I was always going to have to do anyways. I only use a single stage for decapping and resizing everything else is done on my Dillon and Redding presses. I ended up going with the MEC Marksman but if I did bullet seating on a single stage an didn't own a turret press the Foster would've been the one strictly because of the ease of changing dies and the shell plate they have. It's a really cool press that's been around for a long time and you don't hear many bad things about them...

[@HPAcustomriflesandcerakote]

I ended up going mec too. For both my 1000yd benchrifles tho I seat bullets with le wilson chamber dies and sinclair arbor press

[@HPAcustomriflesandcerakote]

It's really tuff to beat the mec. Especially for the price. It's so well built, wide open for easily putting in and pulling out a case, shell holder design has enough float in its design to square u up even with the coarse threads of reloading dies.. Even though with standard dies I use a square up cylinder I made on the lathe to square the die with the ram, polish expander balls on standard sizing dies, and I put small o-rings between the top of the die and lock nuts to allow expander balls and seating stems to float. Ofcourse for redding comp dies with a floating sleeve and micrometer I do not square those up or modify those dies as they make concentric ammo for me on the mec within a 0.001" every time.

[@DanielBoone337]

@@HPAcustomriflesandcerakote yeah man its definitely a sweet press... Take care brother!!

[@davecollins6113]

Just need to be aware, the original Bonanza has been upgraded a couple of times since Forster took it over, both times were to allow for longer cartridges, old ones like the original Bonanza and early Forster won't take the same length cartridges as the newer ones. And something you really didn't say much about, was how the press floats a cartridge case for alignment, the jaws and die mount allow things to line up in the course of operation. And if people think the FA M press is much the same press, look for some of the vids on fixing problems with them, their QC is a bit suspect.

[@RumblestripDotNet]

Would love to see you test this head to head with the MEC Marksman. Not just on the loading side, but if either has can produce an advantage in the field.

[@BoltActionReloading]

The Mec is just a no go for me. I don't want to adjust my dies every time I change calibers. I load too many combinations. I know this is a non factor for some but is way up on my list.

[@RumblestripDotNet]

@@BoltActionReloading Is that mitigated if you use the Hornaday LnL system for the MEC or is that to sloppy in it's fit?

[@rontronimous]

You could measure the pull strength with a trigger pull weight device. Trying to choose between this and the Classic Hornady LocknLoad kit, the Horn has the advantage of being able to add auto case feeding, primers, etc. Thats pretty much a no-go from me now that I find out you have to touch the primer.

[@djpaintles]

The "best" press is FAR better with the new "C" linkages available from Forster and other sources. If you have a Bonanza. No brainer upgrade!

[@josephstanley5239]

What model of Inline Fab mount are you using? TIA

[@ronboe6325]

First saw this on FortuneCookie's site - had to research it right away (I'm new to this reloading stuff) and that was maybe 3 years ago. Then Covid hit and that puppy has been out of stock ever since. Priming: It seems very few folks like priming on the press (progressive presses perhaps the exception), but after that opinions seem to diverge quite a bit. Being a low timer, even I prefer off the press priming.

[@JulemandenpaaCrack]

Do you use the LS shellholder for all of your reloading or do you just recommend buying it?

[@jimbo3615]

I’ve had my Co-ax press for about 15 years. I’ve never liked the priming system because It’s a pain to change cartridge sizes. Maybe I’m doing it wrong but I’ve always hated it and won’t use it anymore.

[@mikedonaldson933]

I have had this press for 6 years. Wish I had bought it 25 years ago.

[@Jeff_Seely]

I have been watching your channel for a while and I have often wondered this: Why do you have that vastly inferior co-ax press on your bench when you could just use really awesome Dillon next door? Well you solved that mystery in this video and I can see those merits that you claimed. Here is a huge downside for me. I bought a co-ax last year, mounted it and went to load some Creedmoor. I could not screw my die down far enough to make contact with the shell holder! And it turned out there were other dies that would not work for me either. The "gantry" is too thick. So I returned it for an RCBS Rebel and love the press.

[@Nonedw]

What dies and type were they?

[@Jeff_Seely]

Whidden micrometer bullet seater which are my favorite dies for my 6.5CM and Frankfort Arsenal Universal micrometer bullet seaters for all other calibers (some calibers may work). Dont get me wrong. I have many goods from Forster and I love the FL sizing dies from them. But this press just aint for me and I'm still disapointed about it. I bought a RCBS Rebel to replace it and that press is a beast!

[@gunngin3586]

Can you reload a few rounds (lets say 10) on each press you own and compare the groups?

[@davestein4162]

Excellent video. This Forster press would be a great addition to my bench. Unfortunately this press, hen’s teeth and primers are equally hard to find.

[@BoltActionReloading]

It was in stock at brownies yesterday.

[@666-y8w]

Where do you live, I have a BRAND NEW B5 sitting in an unopened box.

[@l.a.garcia600]

Thank you for pronouncing L A P U A the way it is supposed to be pronounced by EVERYBODY !

[@ceytoy13]

Hello Mr.@BoltActionReloading (did not find name).. I'm new reloading staff so I'd really appreciate some advice based on your experience with the .338LM and this press...as I haven't found any additional information on die application - Redding Competition Bushing 3-Die Neck Sizer Set + Forster Co-Ax - The question is, will the die slip under the handle? Thanks for the experience! Greetings from distant and at the same time close Ukraine! ( ;

[@WolfBiteTactical]

I know it's a older video, but I will post anyway. I have been handloading using a Lee Loader set for 45-70 and 10mm ( new reloader and figured a good way to learn basics). Now I'm ready for a press. 45-70/10mm/6.5 cm.,these will be my primary loads . Any suggestions on a press?

[@truehaun]

Looking to get into reloading and want to load Barnes 212 lrx bore rider in 300 win mag. Would like to get the Forster but will it work with coal 3.975 which is what Barnes says for COAL with that bullet. The specs I saw said 3.97 usable frame opening. Will it be close enough to work or will I need a different press? Or would the bullet have to seat .005 deeper and would that be an issue?

[@Mike_S_Swift]

In September my Bonaza Co AX press will be 50 years old. The original handle is longer than the Forster regular handle I believe and if I was to change one thing it would be to the Forster handle. The Press in Sep 72’ was about 75$ and a set of Bonanza Benchrest dies was 25$ but if I bought the press the dies were 15$. One of the best purchases of my life along with a 788 in 222 that was 99.95$ 9/72’. Great rifle and great dies and press. All going strong for almost 50 years. Nuff said.

[@tomphillips2608]

These were simply not available when I wanted to upgrade. Went with the Frankford Arsenal M press. You can only use their die holder. This is the weak point of the system. The single brass set screw is notoriously easy to strip. It also provides too much slop in holding the die. I've managed a work around by putting a#5 lead shot under the screw. Also, no priming ability. When I hold my breath and pray 🙏 I can turn out consistent brass , but whew, it's not easy. Just dropped $600 on a new TRACT 3 x 15 50 scope so the Sherrif says I'm through for a while.

[@danielbingham3124]

I like the priming system, you can't smash the primers, seats them accurately.

[@groverhammonds219]

What about your expander dies are working okay with this press I have a Hornady swage die so I guess it can’t be used with this press. .?

[@ericdobson5784]

What are the racks you use for storing dies?

[@Riccardo_V_Florio]

Which brand of dies are you using in the video?

[@Iscariot18]

There's actually a neat trick you can use for reloading pistol to limit travel. Put a standard shellholder in the jaws, problem solved.

[@comodice905]

Boo can u use powder through dies with coax premium pro press

[@claverton]

Good review but he missed out the best part of the press ... that the die can float forward and aft and the shell holder can move left and right ie they are floating. This means it is more accurate both in sizing and bullet seating. Traditional frame presses can be a tiny bit out of alignment which is an issue this press doesn't have and why benchrest shooters like it so much

[@ctech01]

I love my Forster Co-Ax. ❤❤❤❤❤👍👍👍👍👍👀😎

[@comodice905]

Boo do you grease or oil the coaxial press

[@MD82321]

At the 5 minute mark you show an adapter that shortens the throw. Any idea where I can buy one?

[@LexLuthor1234]

Good review, thank you! If i may ask, - how do you find the ergonomics of a central placed lever arm vs the traditional lateraly placed lever arm? :)

[@BoltActionReloading]

It doesn't bother me at all. Unless I am sizing medium to large bottle neck cases I can use the short handle for most things.

[@LexLuthor1234]

@@BoltActionReloading thank you for the quick response 👍 Ok. I'm planning to reload the 7x57 and it's little brother the 6.5x57, so they're a Little longer than a 308 cartridge, but shorter than the 06 family sizes cartridges. Do you think these would do fine in a co ax with no adaptations made? I do appreciate the input, because i doubt i can find a Store with both presses on display to Try out near me👍 Thanks again! Claus

[@BoltActionReloading]

I have loaded 338 LAP on mine and it gets a little tight but does the job it needs too. If you decide to pick it up I hope you love it!

[@LexLuthor1234]

@@BoltActionReloading Ok! well 338 LAP is a lot bigger than my x57s catridges ,D ! Thanks again for the quick feedback, and have a great summer! :) Claus

[@patrickmcandrews8141]

Where did you get the die holder on your bench?

[@ScienceMadeEazy]

does the shell holder come standard in it?

[@gorillamotors]

What do you think of the Area419 Zero turret press? Do you have one or have you played with one yet?

[@BoltActionReloading]

I have not. I know a lot of people like them but personally I wouldn't trade the ease of my Forster. I am sure it sounds crazy to some but I don't know what it is going to do better than my forster. The quick die changes and basically zero runout that I can achieve with it leaves me wanting basically nothing. I have a Dillon 750 sitting next to it if I want speed, but I just use my coax most.

[@graynotescartridgebox]

Do the Area 419 Zero next.

[@BoltActionReloading]

Not sure I have the channel funds for that.

[@graynotescartridgebox]

@@BoltActionReloading understand that!

[@davidandre886]

@@BoltActionReloading no one does 😂 co ax is like 90% as good, so it’s a way better value

[@TexasTrained]

I want one.

[@garytotty3971]

Hornaday dies are cheap Chinese junk. I bought my Co-Ax in 1978, and it's just as square ad tight as day one. Mine is so old that it uses the older shell holders for priming, and getting them can be a pain. I make my own in a lathe with a Hi-Roc drill bit. I had some problems with the shell holder setup at first, but fixed that pretty easily by making the .003" thinner. Newer ones seem to be thinner. Once you learn how to set them up you'll be amazed. As for power; I can full length resize .308 brass with two fingers, and nothing does case forming as well as the Co-Ax

[@84westy55]

Forster makes Curved Linkages for the Co-Ax. They're $29.63 as of Jan 2024.

[@tonygslc801]

Will the Frankford Arsenal Micrometer universal seating die clear the handle on this press?

[@BoltActionReloading]

I haven't tried it but if it works on their M press I am confident it will work on the co-ax

[@TexasTrained]

What's different between the Frankford Arsenal & the Forster Co-AX? It looks a little short on clearance for my 300 PRC.

[@BoltActionReloading]

The FA is not even comparable on quality. Look at thr JRB review and there are complaints about the screws in the bottom plate coming out. The Coax is just a solid press.

[@TexasTrained]

@@BoltActionReloading ok.Thanks

[@buzby80]

The Frankford Arsenal is made in China.

[@boltactoinbarney]

My bonanza is the best damn press I've ever used. For when it has to be better than plinking ammo. Get you one peoples.

[@robertsahli9998]

How do you attach press to your bench?

[@BoltActionReloading]

This is using the press mounts from inline fabrication.

[@ronaldjohnson1474]

The amount of pressure used on a reloading press is minimal, not superhuman. Thus, a big, heavy pressure-monster is not needed.

[@neftalynegron4219]

All i wanna do is reload .338 lapua magnum, i watched your vid on that and im so lost lol. What kinda press do i need all i know is i need dies 🙄

[@BoltActionReloading]

How fast do you want to make them? I have reloaded all my 338LAP on the coax.

[@claytonhollowell4488]

Stuck two cases in my Forster. It rips the rim off.

[@MrBoostin18]

pretty sure inline fab makes a roller handle

[@18B_Porta-Poty_PTSD]

Time is one of the biggest parts of reloading. Does this 1200 dollar press justify the extra 1000 dollars it cost over the hornady lock n load or the RCBS rock chucker? I would have to say no. It's just a single stage press with a price point one could get a multi stage press for. Don't get me wrong, if this was around 400 dollars, I might justify the small details for purchasing.

[@yaudtube]

there are other presses that changing die just a twist ... not too much than what this one has.

[@thompsonjerry3412]

Hard to imagine that lack of availability is due to demand when there are little to no components out there.

[@BoltActionReloading]

Components have been popping up, they are just getting scooped up quickly.

[@thompsonjerry3412]

@@BoltActionReloading bullets and cases, yes, no powder or primers.

[@BoltActionReloading]

I have had luck finding all of it. Things I haven't seen in a year.

[@Hector_Malot]

you cannot use a powder die and this is the major drawback of this press. It is a complementary press but it is not sufficient in itself for all operations like a standard single-stage press.

[@bigwyomingadventures5908]

I will not spend more money... I will not spend more money... I will not spend more money...

[@anthonybending2687]

Hornady lock and load system or lee bresch lock, end of changing dies problem , no need for a new press

[@carbonunit57]

I almost bought a Rebel and would have used L&L bushings. Nothing wrong with that but I didn't own a single stage press so I bought the Co-ax because of other things I liked about the press.

[@anthonybending2687]

@@carbonunit57 if i had a spare 800 bucks, thats what they are here in oz, id have one in a heart beat, there a marvellous press, enjoy yours , cheers

[@carbonunit57]

@@anthonybending2687 , I really agonized over whether to get a Rebel or a Co-Ax. Everytime I look at the money I sent I think I should have gotten the RCBS. I don't think I could gone either way but the RCBS was definitely less money.

[@anthonybending2687]

@@carbonunit57 i use a rcbs rc redding boss 2, lee cast iron, you have spent your money wisely, one of the best press to make perfect ammo, you got to go to 1000 plus us dollars to get better, you will love the press well after you have forgotten the price, cheers mate and have a great day

[@carbonunit57]

@@anthonybending2687 Thanks, I appreciate the feedback. It's still sitting in the box waiting for my Inline Fabrication stuff to show up.

[@jetthreat5000]

Having used the Co-Ax for 3.5 years and now having a Zero press, the zero press is better.

[@BoltActionReloading]

I am sure that some will like it better but I really don't want to give up the die interchangeability. I know you can buy extra turrets, but then I have to figure out how to store them. For me I really don't think I am giving enough up (if I am at all) to matter to me.

[@jetthreat5000]

@@BoltActionReloading they have stands for the extra turrets or the big dog press stand has 2 spots for extra turrets. I’m not saying people should switch to it, but it made my numbers extremely consistent.

[@WvMnts]

Do you have an email we can send some questions to?

[@BoltActionReloading]

Hi Josh, I try to answer comments if at all possible so feel free to post your questions here. I try my best to keep up. I also have a Patreon that messages me every time someone asks a question, if your concerned about your messages getting lost. BAR

[@WvMnts]

@@BoltActionReloading I’m gonna try and start reloading and I’m not sure of all the best things to get such as scales and what all tools are needed. I truly believe in buy nice or buy twice. Buying Alex 10 or rl 1100. And where to buy equipment and tools from.

[@BoltActionReloading]

Hey Josh, if you can give me an idea what calibers and quantities (and accuracy goals) you have and maybe I can try and point you in the right direction.

[@WvMnts]

@@BoltActionReloading whatever you think is best I have no experience. I would just like to what you recommend looking at reloading 5.56/308/300/300hmar/7.62x39/9mm. I watch so many yoyr videos it all kinda runs together. I’d like to be once only on sizing dies caliper scale dies tumbler trimmer. I truly trust yoyr judgment on what all is needed and what all to buy and where to buy from. Thank You for all the great info. I new to KZbin so kinda learning it as well

[@BoltActionReloading]

Hi Josh, Sorry your replies got lost in the shuffle for a couple days. Qualities of what you want to reload and how much you are hoping to spend is pretty relevant. I see 9mm on your list and if you load much of it I wouldn't want to load it on a single stage press personally, lots of folks do but I feel like its working for about $2 per hour. Let me know your thoughts!

[@amurray0]

Typo in your title but probably doesn’t matter

[@BoltActionReloading]

Darn auto correct. Thanks!

[@FearlessMagpie]

turban press and the zero press are better

[@drewt.4353]

You lost me at separate priming station. But I'm not a competitor.