The best settings for Livescope

These Garmin Livescope settings will have you covered for every condition.

[@joebowman8204]

Man I appreciate you doing this video. I’m learning my livescope. I input your settings while on Lake Darbonne today. It was crystal clear.

[@CrappieMonster]

Awesome! Thanks for the feed back.

[@waymondwade2511]

Going in the morning to try out these settings. Thank you for the great explanation on these livescope settings!

[@CrappieMonster]

No problem at all! Thanks for watching

[@amack32]

Just picked up the Echomap Ultra 126SV and this is the best video I’ve seen on KZbin that explains water conditions and making small and simple adjustments to maximize your unit. The KISS method (keep it simple stupid) in full effect and it’s great. Thanks for the video and great tips.

[@CrappieMonster]

Thank you

[@bidkid2020]

Really do appreciate the video on the LV 34 I'm still having problems but it's me not the equipment going to try some of your suggestions and see if it helps with the clarity and keeping track of my lure.

[@billyshipp4080]

Thanks for these awesome setting never been so clear

[@CrappieMonster]

Happy to help!

[@sinnedbo1993]

Thanks to much I really appreciate the setting by far the best I have found thanks for sharing

[@CrappieMonster]

Glad to help, thanks for watching

[@petsurimiikuki7625]

Wow, just wow. Tried these settings this morning and by far the best settings I have used (echomap ultra 102sv + lvs34). Thank you for sharing bro 👍

[@CrappieMonster]

Absolutely! Glad it helped

[@resacarebel1868]

Man I really apprecaite the settings.

[@CrappieMonster]

It just gets it simplified. Most people are over thinking it. Thank you

[@Aintright1965]

Thank You for this info now let's go catch some

[@CrappieMonster]

Good luck. Thanks for watching!

[@lesyoung9294]

Would love to see a video about how to get a lvs32 really clear.

[@joenorton6594]

Great job

[@CrappieMonster]

Thank you.

[@TheFISHIN14]

Thanks Buddy🎣

[@CrappieMonster]

Yes sir!

[@TheFISHIN14]

@@CrappieMonster Always appreciate the way U put it down on the knowledge for us all and providing us all with enjoyable videos 🤞🏼👍🏽🌟

[@ryanpinkston6565]

Great video. What bracket is your live scope pole on? And what pole do you use?

[@CrappieMonster]

I have two in there. One straight to the trolling motor and the other on a All Aboard All Sync.

[@getthenet2358]

I think you may have just saved me $1,5000 thank you.

[@CrappieMonster]

I hope so. Thanks for watching

[@WaylonWaller]

Video on how to set your livescope up to find way points.

[@CrappieMonster]

I can do that. It’ll be a short video so we’ll probably put that on Facebook. Make sure to follow us there.

[@GetBitOutdoors]

Great job. Thk u, what size screen?

[@CrappieMonster]

16”

[@kendallbeck9919]

If they’re linked together and you reset, you’ll also lose settings on other units.

[@JR-mn5pv]

Sweet, thank you .where did you get the stand from for unit please ?

[@CrappieMonster]

Cornfield fishing

[@MrBryanborn]

Thank you for the tips! Question, Does your screen ever freeze up even when you have plenty voltage. I replaced batteries, new power cord, new cradle and it still freezes up on me. So frustrating.

[@CrappieMonster]

Mine does not. I would send it back.

[@Edragonslayer]

How long have you had the all sync setup? How do you like it?

[@CrappieMonster]

Around a year. It’s a good product.

[@jamesthomas5773]

Confused. If I disable sonar, how will I be able to see fish on my FF screen? I run a portable Garmin Ehco Map 93 with pole mounted transducer exclusively for my LiveScope. I rely on my boat mounted Lowrance FF for side imaging, sonar, etc. With everything running, I can’t get any closer than 45 feet to winter crappie schools suspended in waters 30-45 feet deep. Please clarify what I can do with my electrons to not spook deep water crappie schools. Thanks…loved your video and have subscribed.

[@CrappieMonster]

I only disabled sonar on the back unit. The front one was still on. The back one will still ping from the transducer.

[@jamesthomas5773]

@@CrappieMonster Well, I’m a newbie so more confused now than before. This novice is just not getting it. Thanks for trying.

[@WaylonWaller]

How about a video on which is better for the lsv32 mounting on a pole; starboard or port side.

[@CrappieMonster]

In my opinion, it would depend on whether you’re right handed or left handed. For me it’ll be starboard

[@WaylonWaller]

Pole is on starboard side of boat, but transducher is on the port side of the pole. What does that look like on livescope.

[@jamesbrowning6844]

What Software Version Are You Running I never Can Get my screen this clean

[@CrappieMonster]

I’ll have to look because I’m not sure. I try not to update unless I have to.

[@brianrogers3187]

What’s the name off the poll u have mounted to your trolling motor for the live scope transducer

[@CrappieMonster]

All Aboard Marine Model All Scan

[@ronniehamrick54]

What do you change during pollen season on weiss lake??

[@CrappieMonster]

If pollen gets really bad, turn your color gain down.

[@mikedixon3292]

Is your graph on the front and console linked with a Ethernet cable. Mine are so if I disable all sonar it disables all sonar even my panoptix.

[@CrappieMonster]

Mine are not.

[@mikedixon3292]

@@CrappieMonster thanks. I was hopping for a little miracle cure other than breaking my connection. Thanks again.

[@titansfan2104]

@@mikedixon3292 i think you can disable "ALL" sonar and go to your panoptix screen>menu>enable transducer. I believe that will enable just your LS transducer

[@getthenet2358]

What can I adjust to lighten up the three beams shooting down at an angle?

[@CrappieMonster]

Color gain.

[@lesyoung9294]

Did you have the lvs 32 or 34 when making this video? Thanks

[@CrappieMonster]

34

[@lesyoung9294]

@@CrappieMonster thanks

[@markpayne6556]

What adjustment can I do to see my jigs.

[@CrappieMonster]

Most the time it’s practice staying in front of the beam. You can turn up your color gain and your regular gain to help make it brighter.

[@Crappie_Hunter_Seeker]

I have tried these settings but my unit still is not as clear as yours. Not sure why. I made sure I had good clean power to the unit. I just wonder if some units, from the factory, work better than others. Its not as clear and I have trouble seeing my jig. Any ideas?

[@CrappieMonster]

I would factory reset the default settings and then go back to the settings from the video. That will usually help.

[@don-magiclivescope-juan8752]

Probably because you might not have the same unit

[@Crappie_Hunter_Seeker]

@@don-magiclivescope-juan8752 Possible. I have a Garmin 126SV. I have heard that the Echomaps are better for Livescope. Not sure.

[@brianscott5865]

what unit are you running

[@CrappieMonster]

That one is a 8616

[@WaylonWaller]

If your in 16 ft of water what setting do you go too. Some say 5 to 10 ft above the depth your in.

[@CrappieMonster]

20’

[@WaylonWaller]

Thank you

[@scottjordon]

Is that the LVS34 or 32?

[@CrappieMonster]

34

[@adriandavidpayne]

Which Garmin model is this?

[@CrappieMonster]

8616

[@kidiraq8381]

Do you ever use the blue screen? When they installed mine they put the settings in and told me I was good to go. I’ve never even tried amber. God Bless!

[@CrappieMonster]

I have. It’s just not my favorite.

[@kidiraq8381]

@@CrappieMonster Thank you Sir. 1st time seeing your channel. Good stuff. I run HBirds but have the 106sv for livescope. Shop messed with a few strings so I’ve been afraid to mess with anything while I’m learning. I can’t see my lure past 40-45 feet. Is that normal?

[@CrappieMonster]

Yes watch my two Dale hollow videos: I was catching crappie and bass at 120’.

[@kidiraq8381]

@@CrappieMonster Wow! Will do.

[@bradnelson5125]

How do u feel the different color schemes affect your settings ?

[@69Bowhunter]

What unit are you running

[@CrappieMonster]

That is a 8616 I am now running a 22” NBT

[@69Bowhunter]

Thanks for the great video just set my EchoMap Ultra 126 sv up with these settings. Keep the videos coming.👍🏻

[@projectfishinchannel33]

Mine has never looked anything like that in the beginning when you went oops and it got all grainy thats how Mine is all the time iv spent hours adjusting and adding grounds clean power went through all the settings and it still looks like crap

[@CrappieMonster]

What unit do you have?

[@projectfishinchannel33]

@CrappieMonster 106sv with the lvs32 I have hated it since I got it the lvs34 looks better from what I see people saying but I'd really hate to spend that money and be right where I'm at with a little less crappie imagine I'm still mad that I can't use it its so bad so much noise and grain even your stock settings are a 1000 times better then mine has ever looked

[@CrappieMonster]

Something isn’t right with your setup. I had a little grain with my 32 but not enough to matter.

[@projectfishinchannel33]

@CrappieMonster I'm going to get back in my boat and go over my settings again with your video and see if I missed something thanks brother I'll let you know if it helps

[@marcusmorton8101]

16” screen?

[@CrappieMonster]

Yes

[@marcusmorton8101]

Awesome. Heard that the 34 is ideal for the 16 due to the fast processor.

[@alexz1158]

My colour limit doesn’t have 0% it just says default

[@CrappieMonster]

It will have a slide bar on the right side of the screen if you turn off default.

[@alexz1158]

@@CrappieMonster I’m on version 28.00 on a 102sv and I can’t scroll past default

[@rebeccawhite8515]

Send me a Crappie monster decal