THE BEST UPGRADE | Making Self Squaring Flip Stops for my Small Sled

This flip stop blocks for my small cross cut sled, is something I wanted to make for a long time. Now i did it. The construction is the same, as the flip stops I made for my miter saw except the pointers. I like this flip stops a lot. Especially the fact that they can flip up. That is very usefull to prevent the piece to get pinched between stop block and saw blade. In this way I can set the piece against the stop, flip it up and make the cut. Also the self adhesive tape measure is very usefull. Now i dont have to measure anymore. I'm so glad that I finally made this flip stops.
ISBI
-------------------------------------------------------------------------------
#ISimplyBuiltIt #like #comment
-------------------------------------------------------------------------------

[@gguessyah]

Thanks for starting the video with what is going to be built. Really helps me understand what is happening through the rest of the video.

[@paulchamberlaine6757]

Crystal clear instructions / commentary, quietly narrated. Brilliant video, thank you.

[@ISIMPLYBUILTIT]

Thanks man.

[@roberttill3787]

Forget the flip stops, the hand holes in the sledge guide preventing fingers getting caught in the saw blade is a brilliant detail. Well done!

[@ISIMPLYBUILTIT]

Thank you

[@harrypowers9412]

I thoroughly enjoy your videos-the way you zoom in to show details is most helpful. 👍🏻

[@ISIMPLYBUILTIT]

Thanks

[@billcoley8520]

Exactly, I wish he held some of them just a little longer.

[@weekendwarrior9570]

Excellent. Thank you for sharing

[@richarddebeer2247]

Really like your fence, brilliant.

Hello my friend. Good idea. I watched you curiously. Very handy for slideway cutting, turning and stopping. really good idea. congratulations. Thank you for sharing. warm embrace. Yours truly....

[@MauriceCalis]

I have never seen a sled with handles, but I like it. Never made a fence straight so that I could have a support bump in the middle, high enough for taller saw height. But with the slots, I can make a taller flat fence, with t-track and a flip-stop, and still be able to grip the wood.

[@timlist4173]

I really like how you make your own accessories. Beautiful work sir.

[@chriskildun8810]

Clear and precise, thank you.

[@ISIMPLYBUILTIT]

I'm glad if you like it.

[@christofix]

these are great! Well done and thanks for inspiring me!

[@ISIMPLYBUILTIT]

Thank you. I'm glad if you like it.

[@rickwatkins4720]

Clever design and really clear step-by-step build. Much appreciated!

[@ISIMPLYBUILTIT]

Thank you.

[@lorenzocarmelo6781]

Instablaster

[@KAskar-nv3dp]

Super Anleitung 👏🏻👏🏻👏🏻

[@harrypowers9412]

Very expertly done video...I liked everything about it.

[@ISIMPLYBUILTIT]

Thank you so much.

[@norbertgallice7769]

Good Video 👍👏👏 Thank you very much Norbert (France)

[@MindenMoose]

Wonderful. Thanks! I cant believe that I have two accurate stainless rules that I never use for wood work. I am transferring them to the shop from my office desk. And your accent is just fine thanks.

[@ISIMPLYBUILTIT]

Thank you so much. I'm glad to read that.

[@faun1630]

Very useful and brilliant explained. I'm definately gonna make some for my self! Thank's a lot!

[@ISIMPLYBUILTIT]

Thank you. I'm glad if you like it!

[@faun1630]

@@ISIMPLYBUILTIT Yes, SPLENDID!

[@hughvanzyl549]

Luv your projects. Neat and professional. Thank you. Regards Hugh. South Africa

[@billcoley8520]

Hi Hugh from Tennessee

[@marcabentin4438]

very nice a good construction

[@DawidhabdArup_N7]

Brilliant… Thank you my friend…

[@WeGoWalk]

beautiful job!

[@ISIMPLYBUILTIT]

Thank you

[@ecaff9515]

Excellent

[@ISIMPLYBUILTIT]

Thank you.

[@johnvodopija1743]

Nice work! 👍😎🇦🇺

[@ISIMPLYBUILTIT]

Thanks

[@fabriziofabrizi5524]

Bravo complimenti. Fabrizio 🇮🇹

[@ISIMPLYBUILTIT]

Grazie!

[@stufarnham]

Nice!

[@ISIMPLYBUILTIT]

Thanks

[@HansJoachimBlickle]

👍👍👍

[@sergiopellacani9722]

Good

[@ISIMPLYBUILTIT]

Thank you.

[@b3arwithm3]

I make one but when I butt the cut piece against the swing arm, there is a bit of lateral play. So my cuts aren't accurate 🥺 would you have any suggestions to eliminate this? Thanks

[@gordonvandermerwe5640]

Awesome, where can I buy the tape measurement you've cut to add to the jig?.

[@ISIMPLYBUILTIT]

I bought it on amazon. Look here there are plenty of such adhesive tape measures : www.amazon.com/s?k=adhesive+tape+measure&ref=nb_sb_noss_1

[@paulreader1777]

Where do you source your wing bolts?

[@ISIMPLYBUILTIT]

I get them from a near by hardware store. But in the Future I will 3D print them.

[@darklirahmaledicta8478]

Hey nice work! did you do the little cut on that side of the plastik that lays directly on the meassurement-tape? If so - Ok, my question answered - if not, I would recommend to do it on that siede which will lay directly on the tape - parallax error

[@billcoley8520]

When ever my screws are to long I will start the screws and remove them and grind them shorter

[@b3arwithm3]

Could you please explain what makes it self squaring?

[@ISIMPLYBUILTIT]

The fact that the support part is round at the bottom makes it self squaring. As soon as the wing nut is tensioned the round part will align with the t-track.

[@basured9795]

Thank you. I didn't find that self-evident either.

[@BulentOzmenGuida]

Very nice canal. Good job. But very fast video.

[@ISIMPLYBUILTIT]

Thank you. You're not the first that mention that. I can make slower videos in the future but they will be longer.

[@harrypowers9412]

Has anyone ever told you that you sound a lot like Arnold Schwarzenegger?

[@davidnleeh4]

How did you add on the center point marking to your self made marking tool & how does the center point finder work with it, please?

[@paulreader1777]

Look at his construction video for the self made marking tool kzbin.info/www/bejne/sHukkHyCm7WNbdU

[@markkoons7488]

While your projects are useful and clear, the most promising element of your videos for the "self-taught" (a US thing) like me is exposure to your methods of work. I wonder, were you subject to a rigorous apprenticeship?

[@ISIMPLYBUILTIT]

Thank you. What do you mean by rigorous apprenticeship?

[@RylesJMalone]

9:50 Wait what?

[@ISIMPLYBUILTIT]

Did you mean the fold down vise?

[@Amael090756]

I'm so.glad, that your tools are sooo much better than your english articulation 😀😃😄😁😆

[@GNU_Linux_for_good]

Awesome flip stop - *but* this accent is absolutely *lethal* .

[@culllaticiqsu83]

I bought Woodprix once and now I have lifetime access to thousands of woodworking projects.