Another jig for table saw

Based on WALDEON FERREIRA's work!
{warning} 1:32The selection of material cuts for this scene should use a sled
This jig needs an improvement using a spring, maybe! !
(Thanks to those who gave me this advice)
This tool is technically impractical, ideally a spring-operated bearing or a little clearance between the material and the bearing, one of the causes of kickback
If you make this tool, consider that point.

[@54PIRATE]

Just found this video you are true craftsman I love the homemade clamp.i have been a carpenter for 45yrs and still appreciate good quality works

[@TachiOhyo56]

Hello Paul Thank you for coming to my workshop And thank you for the wonderful and wonderful comments I am an old man who loves making clamps and really enjoys his hobby of woodworking. I am happy to meet you as a professional carpenter. Thank you Sincerely Letter from Japan

[@54PIRATE]

@@TachiOhyo56 your most welcome praise where praise is due

[@garrigarikov4541]

Я ставлю лайк не за поделку (хотя она хороша ) , а за то как человек работает и как подана информация. Мне нравится Ваш стиль работы, Ваши приемы обработки, я у Вас учусь. За Вами хочется повторять. Спасибо!

[@TachiOhyo56]

Привет Garri Спасибо, что наслаждаетесь моим видео И спасибо за вашу чудесную поддержку Это видео во многом было разделено на плюсы и минусы. Большое вам спасибо за то, что приняли мое видео. Благодарность и дружба из Японии

[@andrewmathison5025]

Thank you for your videos, easy to follow and watching is so relaxing. Looking forward to making some of your projects easy step by step tuition. Muy bien y gracias

[@TachiOhyo56]

Hello Andrew. Thank you very much for your patronage of my video. And thank you for your sincere and wonderful comments. I'm very happy. Tachi

[@artofnoly9754]

A man of few words... but quite a few rollies, by the looks. Top little device. Thanx for sharing.

[@TachiOhyo56]

Hello, artofnoly Thank you for coming to my workshop And thank you for your wonderful comments The reason my video is silent is that I can only speak Japanese, sorry. Thank you from Japan See you

[@bobcade1002]

The master at work! Very nice. This video is a great example of how a craftsman can learn to master his tools and make them perform to a level necessary to build the project at hand efficiently and successfully! Well done.

[@TachiOhyo56]

Hello,Bob Thanks for watching my video And thank you for the wonderful comments This jig had a lot of comments and was divided into pros and cons. I am puzzled. A kind comment from you saved me at that time. Thank you for your sincerity See you

I love your work, all the tool utilities you make are amazing! Thanks for sharing.

[@TachiOhyo56]

Hello Thank you for always nice comments Nice new design for your icon. I also liked the previous icon.

@@TachiOhyo56 Thanks for your feedback on the icon, I needed a logo for my products in the future. I also made changes to the channel banner including my pet. I await your comment also in the new editions that debut this Saturday! A big hug! And until then ...

[@JCHaywire]

Beautifully produced video, sir. The pace, the reveal, it's all good.

[@TachiOhyo56]

Hello Thank you for enjoying my video And thank you for complimenting my video I agree with you I'm not young, I like video editing at this pace, Thank you See you again

[@ovefinding9662]

Great idea beautifully made! I go out to my workshop right away and make one, Thanks for sharing.

[@TachiOhyo56]

Hello Ove Thank you for always watching the video And thanks for the good comments, I am very happy. This jig has pros and cons, I wish you all the best. Thank you See you again

[@MichaelIreland]

I love how sometimes at the start I'm not sure what you're building, then at the end it's like a Big Reveal when you show how it is to be used. This little jig seems to serve two obvious purposes: as a sort of featherboard and as a secondary fence for repeatable cuts. I have a thin-strip jig that works well, but this one looks like it could do just as well while also serving multiple functions. Great work, and great video!

[@TachiOhyo56]

Hello Thank you for watching my video. Exactly as you explained, if you add one to it, the upper bearing works to stabilize when cutting a little thick wood. Thank you See you

[@alssap3388]

This is obviously better than your thin stripe jig! This fixture is fully controllable and capable of fine tuning! :))

[@emiliofenollosa1235]

X JinAaaaa

[@tomgburklin1112]

Interesting design, I like it, not sure I could build it yet, my current wood working skills main issue. Thank you for the share.

[@TachiOhyo56]

Hello,Tom Thank you for watching my video as usual And I am impressed by the nice comments. You can easily build with a table saw and a drill press. Ask You Watch this video multiple times. Thank you See you again

[@usaf4dbt]

Thank you. I watch your videos over and over again, even on some items I'll never make, there seems always to be a differeent way of doing something, that I copy for another project.

[@TachiOhyo56]

Hello, David Thank you for coming to my workshop And thank you for your wonderful comments. This tool has extreme pros and cons, I stopped using it! But it's my pleasure that the process is your inspiration! Letter from Japan to mate

[@abdulqadeersyedgaqwebebj9955]

Thanks for the upload! Love that you read and reply to the comments. By the way, I'm no woodworker but love how people use their intelligence in a variety of different ways! You are basically an ENGINEER!

[@TachiOhyo56]

Hello, Thanks for watching my video and thanks for the nice comments I am an old man who loves woodworking, and I always do woodworking every week. Of course, all are self-taught because they are amateurs. Please enjoy woodworking with me Thank you, See you again,

[@goodairin]

A nice surprise! Gives me ideas, and I appreciate that it is very useful.

[@TachiOhyo56]

Hello Texas Man. Thank you for watching my video and thank you for your wonderful comments.

[@luisymaz473]

Great jig Maestro! Congratulations on your superb work, best regards.

[@TachiOhyo56]

Hello LUIS YMAZ Thank you for always watching my video. And thank you for the wonderful comments As you say, this jig is more convenient than you might think! ! Thank you See you

[@DonDIYProject]

Good job. I always wanted to make a jig like this to cut thin strips. Thanks for sharing.

[@TachiOhyo56]

Hello Don Thank you for always watching my video and nice comments I am the same as you I also need to cut a lot of fine thin plates safely Using this jig is a lot of fun Thank you See you

[@DonDIYProject]

Thank you. Always a pleasure Watching what you were doing😊

[@WoodBrothersNDS]

Ottimo lavoro... Sempre contraddistinto nei lavori e nel montaggio dei video... Grazie per condividerli con noi 👍🇮🇹

[@TachiOhyo56]

Ciao Grazie per sempre bei commenti Questa maschera aiuterà il mio lavoro di hobby Grazie per aver complimentato con il mio video Ci vediamo di nuovo

[@guylabesseuille2716]

Un guide très ingénieux et réalisé avec précision. En plus, il est beau.

[@FishmanEricRussell]

Nicely done! Another great project!

[@TachiOhyo56]

Hello Fishman Thank you for always watching my video And this video made me confused by the many pros and cons! But thank you for your kind comment, thank you I enjoy your video every time, I love the instant glue on the syringe in your hand. Thank you See you

[@FishmanEricRussell]

@@TachiOhyo56 Thanks so much!

[@robertbrunston5406]

Great job! Looks great! Thank you for sharing.

[@TachiOhyo56]

Hello,Robert Thank you for your wonderful comments as usual There were many pros and cons to this jig! However, I will actively use this jig. Thank you

[@alexbowie6316]

Your work relaxes me Ohyo 56. I am working with wood most days,but still I like to watch, especially in winter. Happy Winter Solstice to you!

[@TachiOhyo56]

Hello Alex Thanks for watching my video And thank you for the good comments I envy you who work on trees every day! An amateur I enjoy woodworking every week on holidays. Thanks for your kind comments. See you

[@thomasarussellsr]

Nice roller "feather-board" . Looks like a precision tool that could come in quite handy. Thanks for sharing.

[@TachiOhyo56]

Hello. Thank you for watching my video And thanks for the nice comments. Someone told me! "This tool is a waste of money and time"! ! I enjoy woodworking as a hobby, of course economically! I'm a little sad ... But your comments empowered me! Thank you See you again

[@rogerhedge1657]

WOW, I'm not sure I could ever built a tool that incredible.....but I sure enjoyed watching you do it. You should sell them. I would be a for sure customer.

[@TachiOhyo56]

Hello roger Thank you for always watching my video And thanks for the nice comment I am very happy. But those who need it are woodworkers, and you can do it well. Thank you Sincerely

[@lxoxrxexnx]

This is a nice way to demonstrate some development and fabrication skills and end up with a useful product. Perhaps it is more than it needs to be, but I like it. Thanks.

[@TachiOhyo56]

Hello Thank you for watching my video And thank you for the nice comments There are pros and cons comments on this jig. The purpose of this jig was to cut multiple thin and thin plates. However, a structure that releases a little pressure like a feather board is required. Therefore, this jig needs a little improvement. Thank you See you

[@johnm7469]

I made this thin strip jig today. It works perfectly. Ohyo56's video projects are a great way for me to improve my woodworking skills, while at the same time having a lot of fun and using up scrap wood. Awesome!

[@TachiOhyo56]

Hello John Thank you for coming to my workshop And thank you for agreeing to my concept As you say, I always have the purpose of running out of waste. And I love trees. Thank you friend

[@Bill.L.Carroll]

Well done, mate. 👍🏽 Brilliant design. Love it. 👌🏽

[@TachiOhyo56]

Hi Bill Thank you for always watching my video There is a negative comment on this tool, for your reference. Thank you See you

[@Bill.L.Carroll]

@@TachiOhyo56 I think they are absolutely wrong, and the proof is in your very own statistics, my friend. You have only 49.5K subscribers, and yet you have almost 110K views! You do your videos on your channel how ever you like, if you wish to put the finished product first, then so be it. If not, then don't stress about one or two people's opinions. Truth is, no matter what you do you will always have one or two people that you cannot please. You cannot please all of the people all of the time, only some of the people some of the time. Take care my friend. 👍🏽

[@TachiOhyo56]

Thank you Bill Your words empowered me

[@Bill.L.Carroll]

@@TachiOhyo56 You are so very welcome my friend. My absolute pleasure. Your work inspires so many people on a daily basis to get in their sheds, workshops or backyards and try their hand at making something from things they have on hand. Your videos are not only inspiring but relaxing and thoroughly enjoyable to watch and learn something. You are an asset to the maker community and KZbin. I wish I could shake your hand. 🤝 Thank you for all your hard work and efforts to supply fantastic content, mate. 👏🏽

[@TachiOhyo56]

Dear Bill Thank you for giving me wonderful words I value your comments on me. I hope you can shake hands with you someday. Thank you Tachi

[@javiermachin1]

Interesting design. Thanks for sharing. Subbed. Greetings from Mexico.

[@TachiOhyo56]

Hello, Javier Thank you for coming to my workshop as usual And thank you for your wonderful comments Now the decorations in my store!

[@sitgesvillaapartmentneilsc7924]

Well I have to admit I wasnt expecting a type of featherboard, nice one though ant not plastic like my ones, but at least i printed mine out of nylon and designed them. -its good to see the use of the sled in combination with the table saw, a lot of people just use it to cross cut and thats it and some carpenters I talk to dont even know that you can make a perfect circle of wood with a sled and table saw and are genuinely surprised when I show them how, Its a very versatile and safe addition to working with a table saw, why the manufacturers dont supply them is beyond me. Mind you its fun to make them and true them up. Thanks, it was nice to watch. great handmade clamps as well.

[@TachiOhyo56]

Hello, Sitges Thank you for watching my video And thank you for the wonderful and wonderful comments This video has a lot of pros and cons, and every time I commented, I was timid! But you gave a good comment, thank you. The table saw is a very dangerous tool! But I love table saws, it's a versatile and very useful tool if used correctly to avoid danger. Thank you from Japan with all your heart

[@sitgesvillaapartmentneilsc7924]

@@TachiOhyo56 It was pleasing to see what you were building, a lot of videos do not do that, good attention to detail is important for a good video. thank you.

[@joseantonio-uc2jh]

Hola maestro de nuevo, muchas gracias por tan buenos videos, la verdad es pienso ya no se puede mejorar más para nuestro taller, pero aparece usted con algo que me deja sorprendido, muchas gracias y un saludo grande y fuerte.

[@TachiOhyo56]

Hola jose Gracias por echar un vistazo a mi proceso de video. Gracias por disfrutar siempre el video. La mejora de esta herramienta se completó con un resorte. Gracias Nos vemos de nuevo

[@cajunstump]

I like the functionality of Young Je's thin RIP jig, but this one has an artisanal quality that moves beyond just the functional. You do good work.

[@TachiOhyo56]

Hello Thank you for watching the video Thank you for your wonderful comments I don't remember seeing that Young Je video, I'll definitely watch it. I'm glad you gave up my video. Thank you See you

[@MJM_spot]

I like this channel, all created with very detail and easy to learn. 👍👍👍👍

[@TachiOhyo56]

Hi Mojima Thank you for your nice comments I am an amateur and play with trees as a hobby for holidays. We cannot make high-level complex things yet. I am delighted to share a good time with you. Thank you See you

[@Kai77884]

Hallo wie immer ein schönes Video.👍👍👍 Und das Hilfsmittel für die Säge ein super Werkzeug 🛠 freue mich schon auf das nächste Video... Mit freundlichen Grüßen aus Deutschland 🇩🇪 👋👋👋Kai

[@TachiOhyo56]

Hallo Kai Vielen Dank, dass Sie sich mein Video immer angesehen haben und nette Kommentare Ich muss viele feine dünne Platten sicher schneiden Die Verwendung dieser Vorrichtung macht sehr viel Spaß Vielen Dank Wir sehen uns wieder

[@Shineysideup1]

Very nicely done.

[@TachiOhyo56]

Hello Thank you for your nice comments Made to cut multiple thin plates, The work is very fun. Thank you for giving up See you

[@esculapiomedicis6156]

Grandioso como siempre y con plano, no hay nada que agregar, gracias por compartir.

[@TachiOhyo56]

Hola Esculapio Gracias por elogiar siempre mis videos. ¡Esta plantilla me ayudará en muchas escenas futuras! Gracias Nos vemos de nuevo

[@patrickbecquet1556]

génial comme idée et en plus très belle finition comme d'habitude....bravo

[@TachiOhyo56]

Bonjour patrick Merci de toujours regarder ma vidéo. Et merci pour les merveilleux commentaires Comme vous le dites, ce gabarit est plus pratique que vous ne le pensez! ! Merci À bientôt

[@Ana-ry1cc]

Fabuloso... gracias por compartir tus conocimientos... saludos desde Santiago de Chile ❤

[@TachiOhyo56]

Hola pepita Gracias por mirar siempre mi video. ¡Este video reunió muchos pros y contras! Muchas gracias por aceptarme. Gracias desde Japón frente a la tierra Nos vemos

[@nicolafabris1041]

Tu si che hai cura delle tue mani, specie di quella sinistra ! Great Idea, Bro!

[@TachiOhyo56]

Ciao,Nicola FABRIS Grazie per aver guardato il mio video E grazie per i gentili commenti. Grazie in futuro Grazie Ci vediamo di nuovo

[@elyr.9841]

Decisamente un oggetto di grande utilità anche per la Sicurezza 👏👏👏👍👍

[@TachiOhyo56]

Ciao Grazie per aver sempre guardato il mio video e bei commenti Mi piace questa maschera principalmente per il taglio di molte schede sottili. Grazie per aver complimentato con il mio video Ci vediamo ancora amico mio

[@patrickfreeman8816]

Thank you for another well thought-out jig. Your designs are always simple and thoughtful. The locking wedge on this jig reminds me of the Cleko locks used by aircraft manufacturing. Thanks again!

[@TachiOhyo56]

Hello Thank you for watching my video and nice comments I made this jig to cut out a thin board of the same size, but there were some negative comments and advice. I had to deal with it! Your comments led me positively. Thank you See you

[@ursupator1]

Es gibt Menschen die sind halt so was von cool,ich bin jetzt 62 Jahre alt und beginne erst jetzt mich mit dem Werkstoff Holz zu beschäftigen.Unglaublich gut der Mann.Greeting from Germany

[@TachiOhyo56]

Hallo zusammen Du bist der beste Mann in Deutschland! Ich bin der beste Mann in Japan! ! ! (Witz) Ich bin in den ersten drei Jahren Holzarbeiter und 63 Jahre alt. Ich unterstütze Sie aufrichtig. Ich möchte wachsen und Spaß an der Holzbearbeitung mit Ihnen haben. Vielen Dank Wir sehen uns wieder

[@omartodologo6227]

Just great. Congratulations!

[@ArcticFlies56]

Another great jig masterpiece. Functional yet handsome. Great work! Best regards, Richard

[@TachiOhyo56]

Hello Richard Thank you for your nice comments as usual I always make my jigs with a fun design that I use. Thank you See you

[@DadzorRules]

Fantastic! I made a similar jig with one roller skate wheel. Your design is much better, because you used two wheels which is perfect for wider (higher) boards. Thanks for sharing.

[@TachiOhyo56]

Hello Dadzor Thank you for watching my video And thank you for the nice comments This jig has pros and cons, but is my favorite I'm glad you gave up! Thank you See you

[@michaelstrother9886]

Very nice. I think I will try to make one.

[@TachiOhyo56]

Hello Please do so＾＾

[@Bricoleando]

Como siempre una genial idea, y un buen trabajo. Saludos.

[@TachiOhyo56]

Hello Thank you for always watching my video and nice comments I really like this jig. Thank you for complimenting my video See you again my friend

[@ARGUS1107]

Muy buena idea amigo. Felicitaciones!!!

[@TachiOhyo56]

Hola, Bienvenido a mi video Y gracias por los buenos comentarios. ¡Esta herramienta ha tenido muchos pros y contras! Construyes con cuidado. Gracias amigo Nos vemos de nuevo

[@ARGUS1107]

Pues yo solo le veo los pros amigo. Esa área que cubren los rodillos es el area más crítica ya que con esa herramienta se evita que tengamos un mal corte. Reitero mis felicitaciones y te mando un fuerte apretón de manos. Bendiciones!!!!

[@TachiOhyo56]

Una vez más, gracias.＾＾

[@johnchisholm7350]

I have absolutely no use for this jig, but to see it being made was pure pleasure, thanks a million. John from oz

[@TachiOhyo56]

Hello Thank you for watching my video and for comments that are complicated to me In the next video, we will make improvements using springs. Thank you See you

[@InfectedByEli]

Nice jig, looks like something my father would have used (that's not a bad thing, btw). I like the camera being mounted on the cross-cut sled, meaning you can get up close to the wood and see the cut as it happens instead of it being too far away. Subscribed.

[@TachiOhyo56]

Hello Thank you for watching the video And thank you for your nice comments I'm glad to see my video in detail. I love cross-cut camera angles. The condition is that the sled slides smoothly. I'm glad you gave up on my video Thank you See you

[@rudolfpeters367]

War im Augenblick auf der Suche nach einer Vorrichtung um schmale Teile auf der Kreissäge zuzusägen. Da kam diese tolle Vorrichtung und das Video dazu gerade recht. Ich mag Deine Arbeiten. So sind mit soviel Liebe für das Detail gemacht. Weiter so. Bin ein Fan. At the moment I was looking for a device to saw narrow parts on the circular saw. Then this great device and the video came just in time. I like your work. They are made with so much attention to deta. Keep it up. I'm a fan. Rudi - Aachen - Deutschland

[@TachiOhyo56]

Hello,Rudi Thanks for watching my video There were a lot of criticism comments on this device, you were relieved otherwise! I warmly welcome you. Thanks for your nice and kind comments See you

[@rudolfpeters367]

Es gibt leider immer wieder Leute, die etwas zu meckern haben, wenn jemand sich Mühe macht über sein erfolgreiches Projekt zu berichten. Dies musste ich auch schon in einem anderen Format hier in Deutschland feststellen. Schaute man mal, was die Kritiker schon so gepostet hatten, konnte man gelegentlich feststellen, dass sie noch keinen einzigen Post veröffentlicht haben. Aber über andere meckern geht wohl immer. Ich bin froh, dass ich für das ein oder andere meiner Projekte hier oder in anderen Formaten Anregungen, Techniken und Hilfsmittel finde. Mach weiter so - Rudi Unfortunately, there are always people who have something to complain about if someone makes an effort to report on their successful project. I had to find this out in another format here in Germany. If you looked at what the critics had already posted, you could occasionally find that they had never published a single post. But complaining about others is always possible. I am happy to find suggestions, techniques and tools for one or the other of my projects here or in other formats. Keep it up - Rudi

[@TachiOhyo56]

Rudolf Mit freundlichen Grüßen

[@Juankaartesanias]

Excelente como todos sus accesorios. Saludos desde Buenos Aires, Argentina. (Excellent like all its accessories. Greetings from Buenos Aires, Argentina)

[@TachiOhyo56]

Hola Juan Gracias por venir a mi taller. Y me alegro de que estés de acuerdo con mi trabajo Gracias por seguir mi video durante mucho tiempo del pasado. De Japon

[@brunothiagocosta8219]

Muito bom! Parabéns. Belo trabalho. Você tem algum vídeo sobre jig para pocket hole?

[@TachiOhyo56]

oi lá Muito obrigado Eu fiz meu próprio buraco no bolso, mas! Feito sem nenhuma pesquisa, isso está errado, não é útil. Desculpe! kzbin.info/www/bejne/r5PWlYCMor2jY7M kzbin.info/www/bejne/qGjHe4l5hJ2UgNE kzbin.info/www/bejne/o2PNh2enqJt_jLs Obrigado por assistir meu vídeo Vejo você de novo

[@davidharvey5672]

Very good design. I noticed how accurate the bearings are. Thanks

[@TachiOhyo56]

Hi David Thank you for always watching my video in detail And I am very happy to give up my video. Thank you See you

[@wildomar1987]

Beautiful jig!

[@TachiOhyo56]

Hello Thank you for watching the video And thank you for the good comment

[@BergflitzerFoto]

Mal wieder ein tolles Projekt das Freude macht 👏👏👏👏👏👍

[@TachiOhyo56]

Hallo Dieter Vielen Dank, dass Sie sich mein Video immer angesehen haben Und ich gebe mein Video sehr gerne auf. Es gibt negative Meinungen über diese Vorrichtung, aber ich benutze sie gerne Vielen Dank Wir sehen uns wieder

[@BergflitzerFoto]

Es wird niemand gezwungen das hier nach zu bauen aber wer etwas vom Handwerk versteht der kann auch damit etwas anfangen 🤗👍

[@Norrad01]

Very handly little jig!

[@TachiOhyo56]

Hello Rich Thank you for always watching my video And thank you for the good comments Let's enjoy woodworking together Thank you from Japan

[@vicdelrosario4237]

Thanks for your video,i got an idea to make my own.i have old bearings.

[@TachiOhyo56]

Hello Vic Thank you for coming to my workshop And thank you for your wonderful comments. Add your idea

[@romain2869]

Great idea beautifully made!

[@TachiOhyo56]

Hello Thank you for always watching my video And glad you gave up the video! Thank you See you

[@romain2869]

@@TachiOhyo56 my pleasure 😊

[@willybaetens4648]

Great, this is the first time I saw this. Imediable I thought, why not making a tube over the barings? It will fit different thicknesses without losing push strength. Very well done, ingenius Willy from Belgium. 👍👍👍👍👍👍

[@TachiOhyo56]

Hello Thank you for watching the video And thank you for the nice comments I upgraded this jig with a built-in spring in the next video, and your ideas are good! Thank you See you again

[@52lorenzo]

Great, it seams to be easy, but . . . Thankyou for showing. Kind regards from MX

[@TachiOhyo56]

Hello Kismet Thank you for watching my video And thank you for your kind comments on this video See you

[@LeosTueftelei]

Very great job! 👍

[@TachiOhyo56]

Hello Thank you for always watching my video And thank you for giving up

[@ravisubramani7868]

Very very useful job thanks for this video

[@TachiOhyo56]

Hello, Ravi Thank you for watching my video And thanks for the nice comment Your praise for this video is particularly appreciated! !! Thank you See you

[@FalsaEscuadra]

These videos are awesome, I can't stop watching them. I hope one day to get some high quality work done. Greetings from Argentina

[@TachiOhyo56]

Hello Thank you very much for enjoying my video And thank you for your nice comments Your words of support will lead me to tomorrow. Thank you See you

[@donaldp9259]

Simplicity is elegance......a featherboard works just fine without all the hassle.

[@TachiOhyo56]

Hello Thank you for your nice comment I always enjoy making it, it's very time-consuming and cumbersome, and turning it into joy is a sense of fulfillment and completion. I want to challenge to make a new feather board someday. Thank you for your advice See you

[@whydoihavetoify]

Very nice idea and well made, I might try this with a short arm rad roller with a high-density foam sleeve instead of the roller bearings, it would take seconds to change the sleeve from a 4" to a 6" for higher cut stability and no issue with clogging and cheaper to build, it would not be as pretty as yours though.

[@TachiOhyo56]

Hello Thank you for watching the video And thank you for nice comments I am very pleased to upgrade my tools with new ideas. If I upgrade what you have made, it will evolve into an infinitely good one. Thank you See you

[@PikeRiverW]

What an innovative jig! I will have to make one or two! Thanks!

[@TachiOhyo56]

Hello Thank you for watching the video And thank you for the good comment There were a number of negative comments and advice in a lot of comments, it is dangerous to use it incorrectly, so we will make a few improvements. It will be completed in the next video. Thank you See you again

[@pastorzackanderson]

Nicely done

[@TachiOhyo56]

Hello Zachary Thank you for coming to my workshop And thank you for the nice comment

[@victorven6834]

Универсальный ролик! Его можно и в гриндере использовать. Хорошая идея. Спасибо!

[@TachiOhyo56]

привет victor Спасибо за отличные комментарии, как всегда.Tachi

[@mallendo]

Great idea. Super implemented.

[@TachiOhyo56]

Hello Thank you for watching the video and thanks for the nice comments I hope this video is for you. Thank you See you

[@geobrown9413]

Good job. Make the bearing section pivot indepently from the main body (spring loaded) that way you do not have to constantly adjust for minor board widths. That is how I have made them in the past, but using metal....easier.

[@TachiOhyo56]

Hello Geo Thank you for coming to my workshop And thank you for your wonderful comments I am very happy that you agreed to my work Thank you

[@BigmoRivera]

Great Jig Nicely Done 🔨

[@TachiOhyo56]

Hello Thank you for your nice comment Please keep accessing my videos. Thank you See you

[@Loyda4FIATLV]

Very awesome and amazing idea

[@TachiOhyo56]

Hello Thanks for accessing my video And thank you for your nice comment This tool works from time to time. Thank you very much See you again

[@dondale68]

Thank you for sharing your idea. That jig could be built taller for cutting tall boards against a tall fence.

[@TachiOhyo56]

Hello dondale Thank you for coming to my workshop And thank you for the good comments Thank you from Japan

[@VIDEOEPPO]

I need to make this...just what I was looking for...

[@TachiOhyo56]

Thank you! Please agree with my construction! There have been many critical comments on this tool. Either way, the table saw is a dangerous tool, work carefully.

[@juanarturo2292]

Amazing! Thanks for sharing.

[@TachiOhyo56]

Hi Juan Thank you for always watching my video And thanks for the wonderful comment You need to fit this jig to the rails of your new table saw! Thank you See you

[@GBJD]

I think your stuff is very good, the details are exquisite, the appearance can be seen to be designed with great care, the whole picture of the film is also very good. But if there is a demonstration of the function of the final product, it will make the whole film better.

[@TachiOhyo56]

Hello Thank you for watching the video And thank you for the highly rated comments The last advice in your comment may be a Japanese feature. Thank you See you

You're a classic old man in the profession, nice job !!

[@TachiOhyo56]

Thank you for watching my video And nice comments I came across a life of enjoying making things with wood. Thank you See you

[@cdrive5757]

I gave you a Thumbs Up because I like the nice array of wood worker's Jigs, fixtures and clamps. They're all worthy of being called a craftsman's work. Unfortunately, despite how nicely you made this table saw fixture I don't see it out performing "Feather Boards" that have been used on table saws since their inception. In fact, ... Feather Board's provide the extra benefit of reducing "Kickback". They're also a hell of a lot easier to make! Cheaper too! ;-)) Wakodahatchee Chris

[@TachiOhyo56]

Hello C DRIVE Thank you for watching my video And thank you for your nice comment. I made this jig on my whim as usual. Now it's on the shelves of my store. As you say, featherboards are very easy and effective. Thank you

[@dustyhush]

nice video and a great tool

[@TachiOhyo56]

Hello Thank you for always nice comments This jig removal is easy and stable. Thank you See you

[@dom3615]

bonjour mon ami !!! encore une fois de plus un outil encore bien intéressant et joli de plus, dommage que tant de distance nous sépare j'aurais été fier de venir vous saluer et vous montrer toute mon admiration devant toutes les choses que vous inventer je me régale toujours autant de regarder vos vidéos continuer à me régaler de vos inventions je me permet de vous saluer bien bas à une prochaine fois avec grand plaisir mon ami ...... 😉😉😉😉👋👋👋👋👍👍👍👍

[@TachiOhyo56]

Chère dominique Votre lettre me remplit toujours d'excitation et de joie! Si vous et moi avons la même sensibilité à la maison, vous prendrez un verre tous les soirs et ma conversation avec vous se poursuivra jusque tard dans la nuit, vous ne pouvez pas parler japonais, je ne parle pas français! ! ! Mais nous pouvons communiquer avec vous! Merci mon ami À bientôt

[@dom3615]

私はあなたの友人の一員であることを誇りに思っていますが、私の年齢で日本語を学ぶのが少し遅いですが、私はもう一度あなたに感謝し、非常にすぐにそれをしたいと思っていました???調べに行く...こんばんは私の友人、翻訳は確かに完璧ではないだろう私は事前に謝罪

[@TachiOhyo56]

有り難う あなたのコメントは完璧です。 あなたの言葉を大切に受け取りました。

[@ArmandGalardLyon]

Formidable outil bravo et toujours autant d'ingéniosité :)

[@TachiOhyo56]

Bonjour Armand Merci de toujours regarder ma vidéo. Ce gabarit m'aidera dans de nombreuses scènes futures! Merci pour vos bons commentaires À bientôt

[@GARRY3754]

Adjustable fence. Very nice.

[@TachiOhyo56]

Hello, garry Thank you for coming to my workshop I'm glad you agree with this homemade tool, which has its pros and cons. Thank you See you

[@Makerperpassione]

Gran bella idea saluti dal Italia!

[@TachiOhyo56]

Ciao, Maker per passione! Grazie per aver guardato il mio video e grazie per i bei commenti Dal Giappone a te in Italia

[@HeadCodeMonkey82]

Wow, your jigs are beautiful. What does this one give over a feather board? Thanks.

[@TachiOhyo56]

Hello Thank you for watching my video And thank you for the nice comments There are pros and cons comments on this tool. It is necessary to absorb a little pressure, the next is to incorporate a spring. If it succeeds, it will be a safe tool Thank you See you

[@ee4231]

I Like it! Finding the means to make the pressure on the work piece spring loaded would be a nice addition.

[@TachiOhyo56]

Hello E E Thank you for coming to my workshop And thank you for your wonderful comments There are many negative comments on this work and this video. Your comment made me happy. Thank you from Japan Sincerely

[@user-ps4du2lt4b]

Всё гениальное просто, классно, есть чему у Вас поучиться, новых творческих идей Вам!

[@TachiOhyo56]

Здравствуйте Александр Спасибо, что всегда смотрите мое видео Спасибо за ваши хорошие комментарии Комментарии к этому видео очень плюсы и минусы ... Спасибо за ваши хорошие комментарии. Спасибо из Японии Увидимся снова

[@neicardozo1069]

Sempre fazendo coisas muito uteis .parabéns mestre .

[@TachiOhyo56]

Olá Obrigado por sempre assistir meu vídeo e bons comentários Eu tenho que cortar muitos pratos finos e finos Usar esse gabarito é muito divertido Obrigada Vejo você de novo

[@brucedeville9053]

Great video

[@TachiOhyo56]

Hello Bruce Thank you for coming to my workshop And thank you for your wonderful comments I am delighted with your admiration. Thank you from Japan

[@hansmatzweissefeder]

hatte gerade mal zeit dir wieder beim arbeiten zu zusehen - eine feine lösung die du hier zeigst - gruß vom federl 🤘😎👍💚🍺🖖

[@TachiOhyo56]

Hallo Hans Vielen Dank, dass Sie sich mein Video wie gewohnt angesehen haben Ich bin sehr zufrieden mit den wunderbaren und freundlichen Kommentaren. Ich wünsche Ihnen und Ihrer Familie ein frohes Weihnachtsfest. Zu meinem Freund Hans

[@pfunnell70]

Beautiful craftsmanship, I really like your approach and style. This is the first of your videos I’ve seen and it led me to subscribe. Best wishes, Paul.

[@TachiOhyo56]

Hello Thank you for watching my video And thank you for the nice comments I saw a video of your channel, there was a traditional martial art Aikido in my country! I'm proud. Best regards from now on Thank you See you again

[@anuragsharma-yt1le]

Hard and very nice work

[@TachiOhyo56]

Hello,anurag Thank you for watching my video as usual Your comments to empower me Thank you See you

[@adrianperalta7192]

👍Perfecto!, fabricaste excelente. Gracias a tu video

[@TachiOhyo56]

Hola Gracias por siempre ver mi video y buenos comentarios. Gracias por felicitar mi video Nos vemos de nuevo

[@j.m.castilla7150]

genial, Thank you for your videos

[@TachiOhyo56]

Hello J.M Thank you for watching my video and nice comments Is this jig design your favorite design for airplane enthusiasts? * I'm sorry I imagined that. Thank you See you

[@TheGe778]

Parabéns Ohyo e obrigado por compartilhar seu conhecimento.

[@TachiOhyo56]

oi lá Ge Obrigado por assistir meu vídeo E obrigado pelo bom comentário Eu estou querendo saber o que fazer a seguir ...! Obrigada Vejo você de novo

[@TheGe778]

@@TachiOhyo56 Já vi um aparelho feito por outra pessoa no you tube, mas gostaria que você fizesse um dispositivo para medir a altura da serra em relaçao à mesa. Usa-se molas para levantar uma pequena régua enquanto sobe ou abaixa a lâmina de serra.

[@sapelesteve]

Nicely done! You have a new subscriber............. :)

[@TachiOhyo56]

Hello Sapele Thank you for always watching my video And I ’m glad to join my channel! Please keep watching my video Thank you See you

[@dustinkeller29]

I love watching you work.

[@TachiOhyo56]

Hello Thank you for your nice comments I hope you relax even a little after watching my video. Thank you See you

[@thelce49]

Good night!! How are you, sir? ? As always, his works are impeccable and very practical. See you soon and thank you!

[@TachiOhyo56]

Hello Thelma Thank you for coming to my workshop today And thank you for your wonderful and kind comments I have given you energy! Thank you Sincerely Letter from Japan

[@thelce49]

Thanks! I'm from Campinas, SP, Brazil 🇧🇷... Always good to be able to follow your work! Have a great day ☀.. See you soon

[@eherlitz]

I like this kind of jigs, I would probably have added a couple of millimetres of spring to the bearing shaft. That way you can ensure to always have sufficient but not to much pressure even if the material isn't 100% straight. Well done!

[@TachiOhyo56]

Hello Eric Thank you for watching my video And thank you for the wonderful comments I am also thinking about improving the point you pointed out. I'm glad you gave up! Thank you See you

[@luischavero9074]

Muy útil e interesante su proyecto ** felicitaciones desde Venezuela .

[@TachiOhyo56]

Hola Luis Gracias por venir a mi video Y gracias por los buenos comentarios Gracias de japon

[@calovian]

Beautiful project: so smart!

[@TachiOhyo56]

Hello Andrea Thank you for always watching the video And thank you for the wonderful comments I also like this jig very much. Thank you, good weekend See you

[@mikesluitertijd]

Practical, safe and simpele, or in other words, Just perfect 👍

[@TachiOhyo56]

Hello Mike Thank you for coming to my workshop And thank you for your wonderful comments There are several negative comments on this video! I sincerely thank you for agreeing to this video. Respect from Japan

[@mikesluitertijd]

@@TachiOhyo56 the people Who are negatieve are simply jalours!

[@Three_Eyed_Willy]

I can't claim to be an expert. But I have been involved in scriptwriting and video production. It's not skill you learn overnight. Keep up the good work.

[@TachiOhyo56]

Hello As I continued to communicate with you, I wanted to agree with your opinion and advice. Before my hobby woodworking, my hobbies were video shooting and editing, of course, self-taught and self-taught, you are amazing! Your experience deserves respect! ! * Thank you See you again

[@Three_Eyed_Willy]

@@TachiOhyo56 -- I'm happy to share my experience with you. I've been in the entertainment business for most of my life. I've written several books, translated some books from German to English, I've done commercials, and all sorts of other performing. I can see that you have some skill in shooting videos and putting them together. That will grow as you work on your videos. Take care, and good luck!

[@TachiOhyo56]

I am deeply grateful for your kind comments and dig deep into my heart. Thank you